/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
#ifndef __INC_HAL8188EPHYCFG_H__
#define __INC_HAL8188EPHYCFG_H__

/*--------------------------Define Parameters-------------------------------*/
#define LOOP_LIMIT			5
#define MAX_STALL_TIME			50		/* us */
#define AntennaDiversityValue		0x80
#define MAX_TXPWR_IDX_NMODE_92S		63
#define Reset_Cnt_Limit			3

#define IQK_MAC_REG_NUM			4
#define IQK_ADDA_REG_NUM		16
#define IQK_BB_REG_NUM			9
#define HP_THERMAL_NUM			8

#define MAX_AGGR_NUM			0x07

/*--------------------------Define Parameters-------------------------------*/

/*------------------------------Define structure----------------------------*/
enum sw_chnl_cmd_id {
	CmdID_End,
	CmdID_SetTxPowerLevel,
	CmdID_BBRegWrite10,
	CmdID_WritePortUlong,
	CmdID_WritePortUshort,
	CmdID_WritePortUchar,
	CmdID_RF_WriteReg,
};

/* 1. Switch channel related */
struct sw_chnl_cmd {
	enum sw_chnl_cmd_id CmdID;
	u32 Para1;
	u32 Para2;
	u32 msDelay;
};

enum hw90_block {
	HW90_BLOCK_MAC = 0,
	HW90_BLOCK_PHY0 = 1,
	HW90_BLOCK_PHY1 = 2,
	HW90_BLOCK_RF = 3,
	HW90_BLOCK_MAXIMUM = 4, /*  Never use this */
};

enum rf_radio_path {
	RF_PATH_A = 0,			/* Radio Path A */
	RF_PATH_B = 1,			/* Radio Path B */
	RF_PATH_C = 2,			/* Radio Path C */
	RF_PATH_D = 3,			/* Radio Path D */
};

#define MAX_PG_GROUP 13

#define	RF_PATH_MAX			3
#define		MAX_RF_PATH		RF_PATH_MAX
#define		MAX_TX_COUNT		4 /* path numbers */

#define CHANNEL_MAX_NUMBER		14	/*  14 is the max chnl number */
#define MAX_CHNL_GROUP_24G		6	/*  ch1~2, ch3~5, ch6~8,
						 *ch9~11, ch12~13, CH 14
						 * total three groups */
#define CHANNEL_GROUP_MAX_88E		6

enum wireless_mode {
	WIRELESS_MODE_UNKNOWN = 0x00,
	WIRELESS_MODE_A			= BIT2,
	WIRELESS_MODE_B			= BIT0,
	WIRELESS_MODE_G			= BIT1,
	WIRELESS_MODE_AUTO		= BIT5,
	WIRELESS_MODE_N_24G		= BIT3,
	WIRELESS_MODE_N_5G		= BIT4,
	WIRELESS_MODE_AC		= BIT6
};

enum phy_rate_tx_offset_area {
	RA_OFFSET_LEGACY_OFDM1,
	RA_OFFSET_LEGACY_OFDM2,
	RA_OFFSET_HT_OFDM1,
	RA_OFFSET_HT_OFDM2,
	RA_OFFSET_HT_OFDM3,
	RA_OFFSET_HT_OFDM4,
	RA_OFFSET_HT_CCK,
};

/* BB/RF related */
enum RF_TYPE_8190P {
	RF_TYPE_MIN,		/*  0 */
	RF_8225 = 1,		/*  1 11b/g RF for verification only */
	RF_8256 = 2,		/*  2 11b/g/n */
	RF_8258 = 3,		/*  3 11a/b/g/n RF */
	RF_6052 = 4,		/*  4 11b/g/n RF */
	/*  TODO: We should remove this psudo PHY RF after we get new RF. */
	RF_PSEUDO_11N = 5,	/*  5, It is a temporality RF. */
};

struct bb_reg_def {
	u32 rfintfs;		/*  set software control: */
				/*	0x870~0x877[8 bytes] */
	u32 rfintfi;		/*  readback data: */
				/*	0x8e0~0x8e7[8 bytes] */
	u32 rfintfo;		/*  output data: */
				/*	0x860~0x86f [16 bytes] */
	u32 rfintfe;		/*  output enable: */
				/*	0x860~0x86f [16 bytes] */
	u32 rf3wireOffset;	/*  LSSI data: */
				/*	0x840~0x84f [16 bytes] */
	u32 rfLSSI_Select;	/*  BB Band Select: */
				/*	0x878~0x87f [8 bytes] */
	u32 rfTxGainStage;	/*  Tx gain stage: */
				/*	0x80c~0x80f [4 bytes] */
	u32 rfHSSIPara1;	/*  wire parameter control1 : */
				/*	0x820~0x823,0x828~0x82b,
				 *	0x830~0x833, 0x838~0x83b [16 bytes] */
	u32 rfHSSIPara2;	/*  wire parameter control2 : */
				/*	0x824~0x827,0x82c~0x82f, 0x834~0x837,
				 *	0x83c~0x83f [16 bytes] */
	u32 rfSwitchControl;	/* Tx Rx antenna control : */
				/*	0x858~0x85f [16 bytes] */
	u32 rfAGCControl1;	/* AGC parameter control1 : */
				/*	0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63,
				 * 0xc68~0xc6b [16 bytes] */
	u32 rfAGCControl2;	/* AGC parameter control2 : */
				/*	0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67,
				 *	0xc6c~0xc6f [16 bytes] */
	u32 rfRxIQImbalance;	/* OFDM Rx IQ imbalance matrix : */
				/*	0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27,
				 *	0xc2c~0xc2f [16 bytes] */
	u32 rfRxAFE;		/* Rx IQ DC ofset and Rx digital filter,
				 * Rx DC notch filter : */
				/*	0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23,
				 *	0xc28~0xc2b [16 bytes] */
	u32 rfTxIQImbalance;	/* OFDM Tx IQ imbalance matrix */
				/*	0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93,
				 *	 0xc98~0xc9b [16 bytes] */
	u32 rfTxAFE;		/* Tx IQ DC Offset and Tx DFIR type */
				/*	0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97,
				 *	0xc9c~0xc9f [16 bytes] */
	u32 rfLSSIReadBack;	/* LSSI RF readback data SI mode */
				/*	0x8a0~0x8af [16 bytes] */
	u32 rfLSSIReadBackPi;	/* LSSI RF readback data PI mode 0x8b8-8bc for
				 * Path A and B */
};

struct ant_sel_ofdm {
	u32 r_tx_antenna:4;
	u32 r_ant_l:4;
	u32 r_ant_non_ht:4;
	u32 r_ant_ht1:4;
	u32 r_ant_ht2:4;
	u32 r_ant_ht_s1:4;
	u32 r_ant_non_ht_s1:4;
	u32 OFDM_TXSC:2;
	u32 reserved:2;
};

struct ant_sel_cck {
	u8 r_cckrx_enable_2:2;
	u8 r_cckrx_enable:2;
	u8 r_ccktx_enable:4;
};

/*------------------------------Define structure----------------------------*/

/*------------------------Export global variable----------------------------*/
/*------------------------Export global variable----------------------------*/

/*------------------------Export Marco Definition---------------------------*/
/*------------------------Export Marco Definition---------------------------*/

/*--------------------------Exported Function prototype---------------------*/
/*  */
/*  BB and RF register read/write */
/*  */
u32 rtl8188e_PHY_QueryBBReg(struct adapter *adapter, u32 regaddr, u32 mask);
void rtl8188e_PHY_SetBBReg(struct adapter *Adapter, u32 RegAddr,
			   u32 mask, u32 data);
u32 rtl8188e_PHY_QueryRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
			    u32 regaddr, u32 mask);
void rtl8188e_PHY_SetRFReg(struct adapter *adapter, enum rf_radio_path rfpath,
			   u32 regaddr, u32 mask, u32 data);

/*  Initialization related function */
/* MAC/BB/RF HAL config */
int PHY_MACConfig8188E(struct adapter *adapter);
int PHY_BBConfig8188E(struct adapter *adapter);
int PHY_RFConfig8188E(struct adapter *adapter);

/* RF config */
int rtl8188e_PHY_ConfigRFWithParaFile(struct adapter *adapter, u8 *filename,
				      enum rf_radio_path rfpath);
int rtl8188e_PHY_ConfigRFWithHeaderFile(struct adapter *adapter,
					enum rf_radio_path rfpath);

/* Read initi reg value for tx power setting. */
void rtl8192c_PHY_GetHWRegOriginalValue(struct adapter *adapter);

/*  BB TX Power R/W */
void PHY_GetTxPowerLevel8188E(struct adapter *adapter, u32 *powerlevel);
void PHY_SetTxPowerLevel8188E(struct adapter *adapter, u8 channel);
bool PHY_UpdateTxPowerDbm8188E(struct adapter *adapter, int power);

void PHY_ScanOperationBackup8188E(struct adapter *Adapter, u8 Operation);

/*  Switch bandwidth for 8192S */
void PHY_SetBWMode8188E(struct adapter *adapter,
			enum ht_channel_width chnlwidth, unsigned char offset);

/*  channel switch related funciton */
void PHY_SwChnl8188E(struct adapter *adapter, u8 channel);
/*  Call after initialization */
void ChkFwCmdIoDone(struct adapter *adapter);

/*  BB/MAC/RF other monitor API */
void PHY_SetRFPathSwitch_8188E(struct adapter *adapter,	bool main);

void PHY_SwitchEphyParameter(struct adapter *adapter);

void PHY_EnableHostClkReq(struct adapter *adapter);

bool SetAntennaConfig92C(struct adapter *adapter, u8 defaultant);

void storePwrIndexDiffRateOffset(struct adapter *adapter, u32 regaddr,
				 u32 mask, u32 data);
/*--------------------------Exported Function prototype---------------------*/

#define PHY_QueryBBReg(adapt, regaddr, mask)			\
	 rtl8188e_PHY_QueryBBReg((adapt), (regaddr), (mask))
#define PHY_SetBBReg(adapt, regaddr, bitmask, data)		\
	 rtl8188e_PHY_SetBBReg((adapt), (regaddr), (bitmask), (data))
#define PHY_QueryRFReg(adapt, rfpath, regaddr, bitmask)	\
	rtl8188e_PHY_QueryRFReg((adapt), (rfpath), (regaddr), (bitmask))
#define PHY_SetRFReg(adapt, rfpath, regaddr, bitmask, data)	\
	rtl8188e_PHY_SetRFReg((adapt), (rfpath), (regaddr), (bitmask), (data))

#define PHY_SetMacReg	PHY_SetBBReg

#define	SIC_HW_SUPPORT			0

#define	SIC_MAX_POLL_CNT		5

#define	SIC_CMD_READY			0
#define	SIC_CMD_WRITE			1
#define	SIC_CMD_READ			2

#define	SIC_CMD_REG			0x1EB		/*  1byte */
#define	SIC_ADDR_REG			0x1E8		/*  1b9~1ba, 2 bytes */
#define	SIC_DATA_REG			0x1EC		/*  1bc~1bf */

#endif	/*  __INC_HAL8192CPHYCFG_H */
