rtl8188eu/hal/OUTSRC/odm.h

2064 lines
51 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__
//============================================================
// Definition
//============================================================
//
// 2011/09/22 MH Define all team supprt ability.
//
//
// 2011/09/22 MH Define for all teams. Please Define the constan in your precomp header.
//
//#define DM_ODM_SUPPORT_AP 0
//#define DM_ODM_SUPPORT_ADSL 0
//#define DM_ODM_SUPPORT_CE 0
//#define DM_ODM_SUPPORT_MP 1
//
// 2011/09/28 MH Define ODM SW team support flag.
//
//
// Antenna Switch Relative Definition.
//
//
// 20100503 Joseph:
// Add new function SwAntDivCheck8192C().
// This is the main function of Antenna diversity function before link.
// Mainly, it just retains last scan result and scan again.
// After that, it compares the scan result to see which one gets better RSSI.
// It selects antenna with better receiving power and returns better scan result.
//
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
//============================================================
//3 Tx Power Tracking
//3============================================================
#define DPK_DELTA_MAPPING_NUM 13
#define index_mapping_HP_NUM 15
//============================================================
//3 PSD Handler
//3============================================================
#define AFH_PSD 1 //0:normal PSD scan, 1: only do 20 pts PSD
#define MODE_40M 0 //0:20M, 1:40M
#define PSD_TH2 3
#define PSD_CHMIN 20 // Minimum channel number for BT AFH
#define SIR_STEP_SIZE 3
#define Smooth_Size_1 5
#define Smooth_TH_1 3
#define Smooth_Size_2 10
#define Smooth_TH_2 4
#define Smooth_Size_3 20
#define Smooth_TH_3 4
#define Smooth_Step_Size 5
#define Adaptive_SIR 1
#if(RTL8723_FPGA_VERIFICATION == 1)
#define PSD_RESCAN 1
#else
#define PSD_RESCAN 4
#endif
#define PSD_SCAN_INTERVAL 700 //ms
//8723A High Power IGI Setting
#define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22
#define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
#define DM_DIG_HIGH_PWR_THRESHOLD 0x3a
#define DM_DIG_LOW_PWR_THRESHOLD 0x14
//ANT Test
#define ANTTESTALL 0x00 //Ant A or B will be Testing
#define ANTTESTA 0x01 //Ant A will be Testing
#define ANTTESTB 0x02 //Ant B will be testing
// LPS define
#define DM_DIG_FA_TH0_LPS 4 //-> 4 in lps
#define DM_DIG_FA_TH1_LPS 15 //-> 15 lps
#define DM_DIG_FA_TH2_LPS 30 //-> 30 lps
#define RSSI_OFFSET_DIG 0x05;
//ANT Test
#define ANTTESTALL 0x00 //Ant A or B will be Testing
#define ANTTESTA 0x01 //Ant A will be Testing
#define ANTTESTB 0x02 //Ant B will be testing
//============================================================
// structure and define
//============================================================
//
// 2011/09/20 MH Add for AP/ADSLpseudo DM structuer requirement.
// We need to remove to other position???
//
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
typedef struct rtl8192cd_priv {
u1Byte temp;
}rtl8192cd_priv, *prtl8192cd_priv;
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
typedef struct _ADAPTER{
u1Byte temp;
#ifdef AP_BUILD_WORKAROUND
HAL_DATA_TYPE* temp2;
prtl8192cd_priv priv;
#endif
}ADAPTER, *PADAPTER;
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_AP)
typedef struct _WLAN_STA{
u1Byte temp;
} WLAN_STA, *PRT_WLAN_STA;
#endif
typedef struct _Dynamic_Initial_Gain_Threshold_
{
u1Byte Dig_Enable_Flag;
u1Byte Dig_Ext_Port_Stage;
int RssiLowThresh;
int RssiHighThresh;
u4Byte FALowThresh;
u4Byte FAHighThresh;
u1Byte CurSTAConnectState;
u1Byte PreSTAConnectState;
u1Byte CurMultiSTAConnectState;
u1Byte PreIGValue;
u1Byte CurIGValue;
u1Byte BT30_CurIGI;
u1Byte BackupIGValue;
s1Byte BackoffVal;
s1Byte BackoffVal_range_max;
s1Byte BackoffVal_range_min;
u1Byte rx_gain_range_max;
u1Byte rx_gain_range_min;
u1Byte Rssi_val_min;
u1Byte PreCCK_CCAThres;
u1Byte CurCCK_CCAThres;
u1Byte PreCCKPDState;
u1Byte CurCCKPDState;
u1Byte LargeFAHit;
u1Byte ForbiddenIGI;
u4Byte Recover_cnt;
u1Byte DIG_Dynamic_MIN_0;
u1Byte DIG_Dynamic_MIN_1;
BOOLEAN bMediaConnect_0;
BOOLEAN bMediaConnect_1;
u4Byte AntDiv_RSSI_max;
u4Byte RSSI_max;
}DIG_T,*pDIG_T;
typedef struct _Dynamic_Power_Saving_
{
u1Byte PreCCAState;
u1Byte CurCCAState;
u1Byte PreRFState;
u1Byte CurRFState;
int Rssi_val_min;
u1Byte initialize;
u4Byte Reg874,RegC70,Reg85C,RegA74;
}PS_T,*pPS_T;
typedef struct _FALSE_ALARM_STATISTICS{
u4Byte Cnt_Parity_Fail;
u4Byte Cnt_Rate_Illegal;
u4Byte Cnt_Crc8_fail;
u4Byte Cnt_Mcs_fail;
u4Byte Cnt_Ofdm_fail;
u4Byte Cnt_Cck_fail;
u4Byte Cnt_all;
u4Byte Cnt_Fast_Fsync;
u4Byte Cnt_SB_Search_fail;
u4Byte Cnt_OFDM_CCA;
u4Byte Cnt_CCK_CCA;
u4Byte Cnt_CCA_all;
u4Byte Cnt_BW_USC; //Gary
u4Byte Cnt_BW_LSC; //Gary
}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;
typedef struct _Dynamic_Primary_CCA{
u1Byte PriCCA_flag;
u1Byte intf_flag;
u1Byte intf_type;
u1Byte DupRTS_flag;
u1Byte Monitor_flag;
}Pri_CCA_T, *pPri_CCA_T;
typedef struct _RX_High_Power_
{
u1Byte RXHP_flag;
u1Byte PSD_func_trigger;
u1Byte PSD_bitmap_RXHP[80];
u1Byte Pre_IGI;
u1Byte Cur_IGI;
u1Byte Pre_pw_th;
u1Byte Cur_pw_th;
BOOLEAN First_time_enter;
BOOLEAN RXHP_enable;
u1Byte TP_Mode;
RT_TIMER PSDTimer;
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
#if USE_WORKITEM
RT_WORK_ITEM PSDTimeWorkitem;
#endif
#endif
}RXHP_T, *pRXHP_T;
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE))
#define ASSOCIATE_ENTRY_NUM 32 // Max size of AsocEntry[].
#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM
#elif(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define ASSOCIATE_ENTRY_NUM NUM_STAT
#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM+1
#else
//
// 2012/01/12 MH Revise for compatiable with other SW team.
// 0 is for STA 1-n is for AP clients.
//
#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM+1// Default port only one
#endif
//#ifdef CONFIG_ANTENNA_DIVERSITY
// This indicates two different the steps.
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
typedef struct _SW_Antenna_Switch_
{
u1Byte try_flag;
s4Byte PreRSSI;
u1Byte CurAntenna;
u1Byte PreAntenna;
u1Byte RSSI_Trying;
u1Byte TestMode;
u1Byte bTriggerAntennaSwitch;
u1Byte SelectAntennaMap;
u1Byte RSSI_target;
// Before link Antenna Switch check
u1Byte SWAS_NoLink_State;
u4Byte SWAS_NoLink_BK_Reg860;
BOOLEAN ANTA_ON; //To indicate Ant A is or not
BOOLEAN ANTB_ON; //To indicate Ant B is on or not
s4Byte RSSI_sum_A;
s4Byte RSSI_sum_B;
s4Byte RSSI_cnt_A;
s4Byte RSSI_cnt_B;
u8Byte lastTxOkCnt;
u8Byte lastRxOkCnt;
u8Byte TXByteCnt_A;
u8Byte TXByteCnt_B;
u8Byte RXByteCnt_A;
u8Byte RXByteCnt_B;
u1Byte TrafficLoad;
RT_TIMER SwAntennaSwitchTimer;
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
#if USE_WORKITEM
RT_WORK_ITEM SwAntennaSwitchWorkitem;
#endif
#endif
/* CE Platform use
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
_timer SwAntennaSwitchTimer;
u8Byte lastTxOkCnt;
u8Byte lastRxOkCnt;
u8Byte TXByteCnt_A;
u8Byte TXByteCnt_B;
u8Byte RXByteCnt_A;
u8Byte RXByteCnt_B;
u1Byte DoubleComfirm;
u1Byte TrafficLoad;
//SW Antenna Switch
#endif
*/
#ifdef CONFIG_HW_ANTENNA_DIVERSITY
//Hybrid Antenna Diversity
u4Byte CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
u4Byte CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
u4Byte OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
u4Byte OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
u4Byte RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM];
u4Byte RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM];
u1Byte TxAnt[ASSOCIATE_ENTRY_NUM];
u1Byte TargetSTA;
u1Byte antsel;
u1Byte RxIdleAnt;
#endif
}SWAT_T, *pSWAT_T;
//#endif
typedef struct _EDCA_TURBO_
{
BOOLEAN bCurrentTurboEDCA;
BOOLEAN bIsCurRDLState;
#if(DM_ODM_SUPPORT_TYPE == ODM_CE )
u4Byte prv_traffic_idx; // edca turbo
#endif
}EDCA_T,*pEDCA_T;
typedef struct _ODM_RATE_ADAPTIVE
{
u1Byte Type; // DM_Type_ByFW/DM_Type_ByDriver
u1Byte HighRSSIThresh; // if RSSI > HighRSSIThresh => RATRState is DM_RATR_STA_HIGH
u1Byte LowRSSIThresh; // if RSSI <= LowRSSIThresh => RATRState is DM_RATR_STA_LOW
u1Byte RATRState; // Current RSSI level, DM_RATR_STA_HIGH/DM_RATR_STA_MIDDLE/DM_RATR_STA_LOW
u4Byte LastRATR; // RATR Register Content
} ODM_RATE_ADAPTIVE, *PODM_RATE_ADAPTIVE;
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#ifdef ADSL_AP_BUILD_WORKAROUND
#define MAX_TOLERANCE 5
#define IQK_DELAY_TIME 1 //ms
#endif
//
// Indicate different AP vendor for IOT issue.
//
typedef enum _HT_IOT_PEER
{
HT_IOT_PEER_UNKNOWN = 0,
HT_IOT_PEER_REALTEK = 1,
HT_IOT_PEER_REALTEK_92SE = 2,
HT_IOT_PEER_BROADCOM = 3,
HT_IOT_PEER_RALINK = 4,
HT_IOT_PEER_ATHEROS = 5,
HT_IOT_PEER_CISCO = 6,
HT_IOT_PEER_MERU = 7,
HT_IOT_PEER_MARVELL = 8,
HT_IOT_PEER_REALTEK_SOFTAP = 9,// peer is RealTek SOFT_AP, by Bohn, 2009.12.17
HT_IOT_PEER_SELF_SOFTAP = 10, // Self is SoftAP
HT_IOT_PEER_AIRGO = 11,
HT_IOT_PEER_INTEL = 12,
HT_IOT_PEER_RTK_APCLIENT = 13,
HT_IOT_PEER_REALTEK_81XX = 14,
HT_IOT_PEER_REALTEK_WOW = 15,
HT_IOT_PEER_MAX = 16
}HT_IOT_PEER_E, *PHTIOT_PEER_E;
#endif//#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define IQK_MAC_REG_NUM 4
#define IQK_ADDA_REG_NUM 16
#define IQK_BB_REG_NUM_MAX 10
#if (RTL8192D_SUPPORT==1)
#define IQK_BB_REG_NUM 10
#else
#define IQK_BB_REG_NUM 9
#endif
#define HP_THERMAL_NUM 8
#define AVG_THERMAL_NUM 8
#define IQK_Matrix_REG_NUM 8
#define IQK_Matrix_Settings_NUM 1+24+21
#define DM_Type_ByFW 0
#define DM_Type_ByDriver 1
//
// Declare for common info
//
// Declare for common info
//
#define MAX_PATH_NUM_92CS 2
typedef struct _ODM_Phy_Status_Info_
{
u1Byte RxPWDBAll;
u1Byte SignalQuality; // in 0-100 index.
u1Byte RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; //EVM
u1Byte RxMIMOSignalStrength[MAX_PATH_NUM_92CS];// in 0~100 index
#if (DM_ODM_SUPPORT_TYPE & (ODM_MP|ODM_CE))
s1Byte RxPower; // in dBm Translate from PWdB
s1Byte RecvSignalPower;// Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures.
u1Byte BTRxRSSIPercentage;
u1Byte SignalStrength; // in 0-100 index.
u1Byte RxPwr[MAX_PATH_NUM_92CS];//per-path's pwdb
#endif
u1Byte RxSNR[MAX_PATH_NUM_92CS];//per-path's SNR
}ODM_PHY_INFO_T,*PODM_PHY_INFO_T;
typedef struct _ODM_Phy_Dbg_Info_
{
//ODM Write,debug info
s1Byte RxSNRdB[MAX_PATH_NUM_92CS];
u8Byte NumQryPhyStatus;
u8Byte NumQryPhyStatusCCK;
u8Byte NumQryPhyStatusOFDM;
u1Byte NumQryBeaconPkt;
//Others
s4Byte RxEVM[MAX_PATH_NUM_92CS];
}ODM_PHY_DBG_INFO_T;
typedef struct _ODM_Per_Pkt_Info_
{
u1Byte Rate;
u1Byte StationID;
BOOLEAN bPacketMatchBSSID;
BOOLEAN bPacketToSelf;
BOOLEAN bPacketBeacon;
}ODM_PACKET_INFO_T,*PODM_PACKET_INFO_T;
typedef struct _ODM_Mac_Status_Info_
{
u1Byte test;
}ODM_MAC_INFO;
typedef enum tag_Dynamic_ODM_Support_Ability_Type
{
// BB Team
ODM_DIG = 0x00000001,
ODM_HIGH_POWER = 0x00000002,
ODM_CCK_CCA_TH = 0x00000004,
ODM_FA_STATISTICS = 0x00000008,
ODM_RAMASK = 0x00000010,
ODM_RSSI_MONITOR = 0x00000020,
ODM_SW_ANTDIV = 0x00000040,
ODM_HW_ANTDIV = 0x00000080,
ODM_BB_PWRSV = 0x00000100,
ODM_2TPATHDIV = 0x00000200,
ODM_1TPATHDIV = 0x00000400,
ODM_PSD2AFH = 0x00000800
}ODM_Ability_E;
//
// 2011/20/20 MH For MP driver RT_WLAN_STA = STA_INFO_T
// Please declare below ODM relative info in your STA info structure.
//
#if 1
typedef struct _ODM_STA_INFO{
// Driver Write
BOOLEAN bUsed; // record the sta status link or not?
//u1Byte WirelessMode; //
u1Byte IOTPeer; // Enum value. HT_IOT_PEER_E
// ODM Write
//1 PHY_STATUS_INFO
u1Byte RSSI_Path[4]; //
u1Byte RSSI_Ave;
u1Byte RXEVM[4];
u1Byte RXSNR[4];
// ODM Write
//1 TX_INFO (may changed by IC)
//TX_INFO_T pTxInfo; // Define in IC folder. Move lower layer.
#if 0
u1Byte ANTSEL_A; //in Jagar: 4bit; others: 2bit
u1Byte ANTSEL_B; //in Jagar: 4bit; others: 2bit
u1Byte ANTSEL_C; //only in Jagar: 4bit
u1Byte ANTSEL_D; //only in Jagar: 4bit
u1Byte TX_ANTL; //not in Jagar: 2bit
u1Byte TX_ANT_HT; //not in Jagar: 2bit
u1Byte TX_ANT_CCK; //not in Jagar: 2bit
u1Byte TXAGC_A; //not in Jagar: 4bit
u1Byte TXAGC_B; //not in Jagar: 4bit
u1Byte TXPWR_OFFSET; //only in Jagar: 3bit
u1Byte TX_ANT; //only in Jagar: 4bit for TX_ANTL/TX_ANTHT/TX_ANT_CCK
#endif
//
// Please use compile flag to disabe the strcutrue for other IC except 88E.
// Move To lower layer.
//
// ODM Write Wilson will handle this part(said by Luke.Lee)
//TX_RPT_T pTxRpt; // Define in IC folder. Move lower layer.
#if 0
//1 For 88E RA (don't redefine the naming)
u1Byte rate_id;
u1Byte rate_SGI;
u1Byte rssi_sta_ra;
u1Byte SGI_enable;
u1Byte Decision_rate;
u1Byte Pre_rate;
u1Byte Active;
// Driver write Wilson handle.
//1 TX_RPT (don't redefine the naming)
u2Byte RTY[4]; // ???
u2Byte TOTAL; // ???
u2Byte DROP; // ???
//
// Please use compile flag to disabe the strcutrue for other IC except 88E.
//
#endif
}ODM_STA_INFO_T, *PODM_STA_INFO_T;
#endif
//
// 2011/10/20 MH Define Common info enum for all team.
//
typedef enum _ODM_Common_Info_Definition
{
//-------------REMOVED CASE-----------//
//ODM_CMNINFO_CCK_HP,
//ODM_CMNINFO_RFPATH_ENABLE, // Define as ODM write???
//ODM_CMNINFO_BT_COEXIST, // ODM_BT_COEXIST_E
//ODM_CMNINFO_OP_MODE, // ODM_OPERATION_MODE_E
//-------------REMOVED CASE-----------//
//
// Fixed value:
//
//-----------HOOK BEFORE REG INIT-----------//
ODM_CMNINFO_PLATFORM = 0,
ODM_CMNINFO_ABILITY, // ODM_ABILITY_E
ODM_CMNINFO_INTERFACE, // ODM_INTERFACE_E
ODM_CMNINFO_MP_TEST_CHIP,
ODM_CMNINFO_IC_TYPE, // ODM_IC_TYPE_E
ODM_CMNINFO_CUT_VER, // ODM_CUT_VERSION_E
ODM_CMNINFO_FAB_VER, // ODM_FAB_E
ODM_CMNINFO_RF_TYPE, // ODM_RF_PATH_E or ODM_RF_TYPE_E?
ODM_CMNINFO_BOARD_TYPE, // ODM_BOARD_TYPE_E
ODM_CMNINFO_EXT_LNA, // TRUE
ODM_CMNINFO_EXT_PA,
ODM_CMNINFO_EXT_TRSW,
ODM_CMNINFO_PATCH_ID, //CUSTOMER ID
ODM_CMNINFO_BINHCT_TEST,
ODM_CMNINFO_BWIFI_TEST,
ODM_CMNINFO_SMART_CONCURRENT,
//-----------HOOK BEFORE REG INIT-----------//
//
// Dynamic value:
//
//--------- POINTER REFERENCE-----------//
ODM_CMNINFO_MAC_PHY_MODE, // ODM_MAC_PHY_MODE_E
ODM_CMNINFO_TX_UNI,
ODM_CMNINFO_RX_UNI,
ODM_CMNINFO_WM_MODE, // ODM_WIRELESS_MODE_E
ODM_CMNINFO_BAND, // ODM_BAND_TYPE_E
ODM_CMNINFO_SEC_CHNL_OFFSET, // ODM_SEC_CHNL_OFFSET_E
ODM_CMNINFO_SEC_MODE, // ODM_SECURITY_E
ODM_CMNINFO_BW, // ODM_BW_E
ODM_CMNINFO_CHNL,
ODM_CMNINFO_DMSP_GET_VALUE,
ODM_CMNINFO_BUDDY_ADAPTOR,
ODM_CMNINFO_DMSP_IS_MASTER,
ODM_CMNINFO_SCAN,
ODM_CMNINFO_POWER_SAVING,
ODM_CMNINFO_ONE_PATH_CCA, // ODM_CCA_PATH_E
ODM_CMNINFO_DRV_STOP,
ODM_CMNINFO_PNP_IN,
ODM_CMNINFO_INIT_ON,
ODM_CMNINFO_ANT_TEST,
ODM_CMNINFO_NET_CLOSED,
ODM_CMNINFO_MP_MODE,
//--------- POINTER REFERENCE-----------//
//------------CALL BY VALUE-------------//
ODM_CMNINFO_WIFI_DIRECT,
ODM_CMNINFO_WIFI_DISPLAY,
ODM_CMNINFO_LINK,
ODM_CMNINFO_RSSI_MIN,
ODM_CMNINFO_DBG_COMP, // u8Byte
ODM_CMNINFO_DBG_LEVEL, // u4Byte
ODM_CMNINFO_RA_THRESHOLD_HIGH, // u1Byte
ODM_CMNINFO_RA_THRESHOLD_LOW, // u1Byte
ODM_CMNINFO_RF_ANTENNA_TYPE, // u1Byte
ODM_CMNINFO_BT_DISABLED,
ODM_CMNINFO_BT_OPERATION,
ODM_CMNINFO_BT_DIG,
ODM_CMNINFO_BT_BUSY, //Check Bt is using or not//neil
ODM_CMNINFO_BT_DISABLE_EDCA,
ODM_CMNINFO_STATION_STATE,
//------------CALL BY VALUE-------------//
//
// Dynamic ptr array hook itms.
//
ODM_CMNINFO_STA_STATUS,
ODM_CMNINFO_PHY_STATUS,
ODM_CMNINFO_MAC_STATUS,
ODM_CMNINFO_MAX,
}ODM_CMNINFO_E;
//
// 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY
//
typedef enum _ODM_Support_Ability_Definition
{
//
// BB ODM section BIT 0-15
//
ODM_BB_DIG = BIT0,
ODM_BB_RA_MASK = BIT1,
ODM_BB_DYNAMIC_TXPWR = BIT2,
ODM_BB_FA_CNT = BIT3,
ODM_BB_RSSI_MONITOR = BIT4,
ODM_BB_CCK_PD = BIT5,
ODM_BB_ANT_DIV = BIT6,
ODM_BB_PWR_SAVE = BIT7,
ODM_BB_PWR_TRAIN = BIT8,
ODM_BB_RATE_ADAPTIVE = BIT9,
ODM_BB_PATH_DIV = BIT10,
ODM_BB_PSD = BIT11,
ODM_BB_RXHP = BIT12,
ODM_BB_ADAPTIVITY = BIT13,
ODM_BB_DYNAMIC_ATC = BIT14,
//
// MAC DM section BIT 16-23
//
ODM_MAC_EDCA_TURBO = BIT16,
ODM_MAC_EARLY_MODE = BIT17,
//
// RF ODM section BIT 24-31
//
ODM_RF_TX_PWR_TRACK = BIT24,
ODM_RF_RX_GAIN_TRACK = BIT25,
ODM_RF_CALIBRATION = BIT26,
}ODM_ABILITY_E;
// ODM_CMNINFO_INTERFACE
typedef enum tag_ODM_Support_Interface_Definition
{
ODM_ITRF_PCIE = 0x1,
ODM_ITRF_USB = 0x2,
ODM_ITRF_SDIO = 0x4,
ODM_ITRF_ALL = 0x7,
}ODM_INTERFACE_E;
// ODM_CMNINFO_IC_TYPE
typedef enum tag_ODM_Support_IC_Type_Definition
{
ODM_RTL8192S = BIT0,
ODM_RTL8192C = BIT1,
ODM_RTL8192D = BIT2,
ODM_RTL8723A = BIT3,
ODM_RTL8188E = BIT4,
ODM_RTL8812 = BIT5,
ODM_RTL8821 = BIT6,
ODM_RTL8192E = BIT7,
ODM_RTL8723B = BIT8,
ODM_RTL8813A = BIT9,
ODM_RTL8881A = BIT10
}ODM_IC_TYPE_E;
#define ODM_IC_11N_SERIES (ODM_RTL8192S|ODM_RTL8192C|ODM_RTL8192D|ODM_RTL8723A|ODM_RTL8188E)
#define ODM_IC_11AC_SERIES (ODM_RTL8812)
//ODM_CMNINFO_CUT_VER
typedef enum tag_ODM_Cut_Version_Definition
{
ODM_CUT_A = 1,
ODM_CUT_B = 2,
ODM_CUT_C = 3,
ODM_CUT_D = 4,
ODM_CUT_E = 5,
ODM_CUT_F = 6,
ODM_CUT_TEST = 7,
}ODM_CUT_VERSION_E;
// ODM_CMNINFO_FAB_VER
typedef enum tag_ODM_Fab_Version_Definition
{
ODM_TSMC = 0,
ODM_UMC = 1,
}ODM_FAB_E;
// ODM_CMNINFO_RF_TYPE
//
// For example 1T2R (A+AB = BIT0|BIT4|BIT5)
//
typedef enum tag_ODM_RF_Path_Bit_Definition
{
ODM_RF_TX_A = BIT0,
ODM_RF_TX_B = BIT1,
ODM_RF_TX_C = BIT2,
ODM_RF_TX_D = BIT3,
ODM_RF_RX_A = BIT4,
ODM_RF_RX_B = BIT5,
ODM_RF_RX_C = BIT6,
ODM_RF_RX_D = BIT7,
}ODM_RF_PATH_E;
typedef enum tag_ODM_RF_Type_Definition
{
ODM_1T1R = 0,
ODM_1T2R = 1,
ODM_2T2R = 2,
ODM_2T3R = 3,
ODM_2T4R = 4,
ODM_3T3R = 5,
ODM_3T4R = 6,
ODM_4T4R = 7,
}ODM_RF_TYPE_E;
//
// ODM Dynamic common info value definition
//
//typedef enum _MACPHY_MODE_8192D{
// SINGLEMAC_SINGLEPHY,
// DUALMAC_DUALPHY,
// DUALMAC_SINGLEPHY,
//}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D;
// Above is the original define in MP driver. Please use the same define. THX.
typedef enum tag_ODM_MAC_PHY_Mode_Definition
{
ODM_SMSP = 0,
ODM_DMSP = 1,
ODM_DMDP = 2,
}ODM_MAC_PHY_MODE_E;
typedef enum tag_BT_Coexist_Definition
{
ODM_BT_BUSY = 1,
ODM_BT_ON = 2,
ODM_BT_OFF = 3,
ODM_BT_NONE = 4,
}ODM_BT_COEXIST_E;
// ODM_CMNINFO_OP_MODE
typedef enum tag_Operation_Mode_Definition
{
ODM_NO_LINK = BIT0,
ODM_LINK = BIT1,
ODM_SCAN = BIT2,
ODM_POWERSAVE = BIT3,
ODM_AP_MODE = BIT4,
ODM_CLIENT_MODE = BIT5,
ODM_AD_HOC = BIT6,
ODM_WIFI_DIRECT = BIT7,
ODM_WIFI_DISPLAY = BIT8,
}ODM_OPERATION_MODE_E;
// ODM_CMNINFO_WM_MODE
typedef enum tag_Wireless_Mode_Definition
{
ODM_WM_UNKNOW = 0x0,
ODM_WM_B = BIT0,
ODM_WM_G = BIT1,
ODM_WM_A = BIT2,
ODM_WM_N24G = BIT3,
ODM_WM_N5G = BIT4,
ODM_WM_AUTO = BIT5,
ODM_WM_AC = BIT6,
}ODM_WIRELESS_MODE_E;
// ODM_CMNINFO_BAND
typedef enum tag_Band_Type_Definition
{
ODM_BAND_2_4G = BIT0,
ODM_BAND_5G = BIT1,
}ODM_BAND_TYPE_E;
// ODM_CMNINFO_SEC_CHNL_OFFSET
typedef enum tag_Secondary_Channel_Offset_Definition
{
ODM_DONT_CARE = 0,
ODM_BELOW = 1,
ODM_ABOVE = 2
}ODM_SEC_CHNL_OFFSET_E;
// ODM_CMNINFO_SEC_MODE
typedef enum tag_Security_Definition
{
ODM_SEC_OPEN = 0,
ODM_SEC_WEP40 = 1,
ODM_SEC_TKIP = 2,
ODM_SEC_RESERVE = 3,
ODM_SEC_AESCCMP = 4,
ODM_SEC_WEP104 = 5,
ODM_WEP_WPA_MIXED = 6, // WEP + WPA
ODM_SEC_SMS4 = 7,
}ODM_SECURITY_E;
// ODM_CMNINFO_BW
typedef enum tag_Bandwidth_Definition
{
ODM_BW20M = 0,
ODM_BW40M = 1,
ODM_BW80M = 2,
ODM_BW160M = 3,
ODM_BW10M = 4,
}ODM_BW_E;
// ODM_CMNINFO_CHNL
// ODM_CMNINFO_BOARD_TYPE
#if 1
typedef enum tag_Board_Definition
{
ODM_BOARD_DEFAULT = 0, // The DEFAULT case.
ODM_BOARD_MINICARD = BIT(0), // 0 = non-mini card, 1= mini card.
ODM_BOARD_SLIM = BIT(1), // 0 = non-slim card, 1 = slim card
ODM_BOARD_BT = BIT(2), // 0 = without BT card, 1 = with BT
ODM_BOARD_EXT_PA = BIT(3), // 0 = no 2G ext-PA, 1 = existing 2G ext-PA
ODM_BOARD_EXT_LNA = BIT(4), // 0 = no 2G ext-LNA, 1 = existing 2G ext-LNA
ODM_BOARD_EXT_TRSW = BIT(5), // 0 = no ext-TRSW, 1 = existing ext-TRSW
ODM_BOARD_EXT_PA_5G = BIT(6), // 0 = no 5G ext-PA, 1 = existing 5G ext-PA
ODM_BOARD_EXT_LNA_5G = BIT(7), // 0 = no 5G ext-LNA, 1 = existing 5G ext-LNA
}ODM_BOARD_TYPE_E;
#else
typedef enum tag_Board_Definition
{
ODM_BOARD_NORMAL = 0,
ODM_BOARD_HIGHPWR = 1,
ODM_BOARD_MINICARD = 2,
ODM_BOARD_SLIM = 3,
ODM_BOARD_COMBO = 4,
}ODM_BOARD_TYPE_E;
#endif
// ODM_CMNINFO_ONE_PATH_CCA
typedef enum tag_CCA_Path
{
ODM_CCA_2R = 0,
ODM_CCA_1R_A = 1,
ODM_CCA_1R_B = 2,
}ODM_CCA_PATH_E;
typedef struct _ODM_RA_Info_
{
u1Byte RateID;
u4Byte RateMask;
u4Byte RAUseRate;
u1Byte RateSGI;
u1Byte RssiStaRA;
u1Byte PreRssiStaRA;
u1Byte SGIEnable;
u1Byte DecisionRate;
u1Byte PreRate;
u1Byte HighestRate;
u1Byte LowestRate;
u4Byte NscUp;
u4Byte NscDown;
u2Byte RTY[5];
u4Byte TOTAL;
u2Byte DROP;//Retry over or drop
u2Byte DROP1;//LifeTime over
u1Byte Active;
u2Byte RptTime;
u1Byte RAWaitingCounter;
u1Byte RAPendingCounter;
#if 1 //POWER_TRAINING_ACTIVE == 1 // For compile pass only~!
u1Byte PTActive; // on or off
u1Byte PTTryState; // 0 trying state, 1 for decision state
u1Byte PTStage; // 0~6
u1Byte PTStopCount; //Stop PT counter
u1Byte PTPreRate; // if rate change do PT
u1Byte PTPreRssi; // if RSSI change 5% do PT
u1Byte PTModeSS; // decide whitch rate should do PT
u1Byte RAstage; // StageRA, decide how many times RA will be done between PT
u1Byte PTSmoothFactor;
#endif
} ODM_RA_INFO_T,*PODM_RA_INFO_T;
typedef struct _IQK_MATRIX_REGS_SETTING{
BOOLEAN bIQKDone;
s4Byte Value[1][IQK_Matrix_REG_NUM];
}IQK_MATRIX_REGS_SETTING,*PIQK_MATRIX_REGS_SETTING;
#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
typedef struct _PathDiv_Parameter_define_
{
u4Byte org_5g_RegE30;
u4Byte org_5g_RegC14;
u4Byte org_5g_RegCA0;
u4Byte swt_5g_RegE30;
u4Byte swt_5g_RegC14;
u4Byte swt_5g_RegCA0;
//for 2G IQK information
u4Byte org_2g_RegC80;
u4Byte org_2g_RegC4C;
u4Byte org_2g_RegC94;
u4Byte org_2g_RegC14;
u4Byte org_2g_RegCA0;
u4Byte swt_2g_RegC80;
u4Byte swt_2g_RegC4C;
u4Byte swt_2g_RegC94;
u4Byte swt_2g_RegC14;
u4Byte swt_2g_RegCA0;
}PATHDIV_PARA,*pPATHDIV_PARA;
#endif
typedef struct ODM_RF_Calibration_Structure
{
//for tx power tracking
u4Byte RegA24; // for TempCCK
s4Byte RegE94;
s4Byte RegE9C;
s4Byte RegEB4;
s4Byte RegEBC;
//u1Byte bTXPowerTracking;
u1Byte TXPowercount;
BOOLEAN bTXPowerTrackingInit;
BOOLEAN bTXPowerTracking;
u1Byte TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default
u1Byte TM_Trigger;
u1Byte InternalPA5G[2]; //pathA / pathB
u1Byte ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
u1Byte ThermalValue;
u1Byte ThermalValue_LCK;
u1Byte ThermalValue_IQK;
u1Byte ThermalValue_DPK;
u1Byte ThermalValue_AVG[AVG_THERMAL_NUM];
u1Byte ThermalValue_AVG_index;
u1Byte ThermalValue_RxGain;
u1Byte ThermalValue_Crystal;
u1Byte ThermalValue_DPKstore;
u1Byte ThermalValue_DPKtrack;
BOOLEAN TxPowerTrackingInProgress;
BOOLEAN bDPKenable;
BOOLEAN bReloadtxpowerindex;
u1Byte bRfPiEnable;
u4Byte TXPowerTrackingCallbackCnt; //cosa add for debug
u1Byte bCCKinCH14;
u1Byte CCK_index;
u1Byte OFDM_index[2];
BOOLEAN bDoneTxpower;
s1Byte PowerIndexOffset;
s1Byte DeltaPowerIndex;
s1Byte DeltaPowerIndexLast;
BOOLEAN bTxPowerChanged;
u1Byte ThermalValue_HP[HP_THERMAL_NUM];
u1Byte ThermalValue_HP_index;
IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
u1Byte Delta_IQK;
u1Byte Delta_LCK;
//for IQK
u4Byte RegC04;
u4Byte Reg874;
u4Byte RegC08;
u4Byte RegB68;
u4Byte RegB6C;
u4Byte Reg870;
u4Byte Reg860;
u4Byte Reg864;
BOOLEAN bIQKInitialized;
BOOLEAN bLCKInProgress;
BOOLEAN bAntennaDetected;
u4Byte ADDA_backup[IQK_ADDA_REG_NUM];
u4Byte IQK_MAC_backup[IQK_MAC_REG_NUM];
u4Byte IQK_BB_backup_recover[9];
u4Byte IQK_BB_backup[IQK_BB_REG_NUM];
//for APK
u4Byte APKoutput[2][2]; //path A/B; output1_1a/output1_2a
u1Byte bAPKdone;
u1Byte bAPKThermalMeterIgnore;
u1Byte bDPdone;
u1Byte bDPPathAOK;
u1Byte bDPPathBOK;
}ODM_RF_CAL_T,*PODM_RF_CAL_T;
//
// ODM Dynamic common info value definition
//
typedef struct _FAST_ANTENNA_TRAINNING_
{
u1Byte Bssid[6];
u1Byte antsel_rx_keep_0;
u1Byte antsel_rx_keep_1;
u1Byte antsel_rx_keep_2;
u4Byte antSumRSSI[7];
u4Byte antRSSIcnt[7];
u4Byte antAveRSSI[7];
u1Byte FAT_State;
u4Byte TrainIdx;
u1Byte antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
u1Byte antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
u1Byte antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
u4Byte MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
u4Byte AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
u4Byte MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
u4Byte AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
u1Byte RxIdleAnt;
BOOLEAN bBecomeLinked;
}FAT_T,*pFAT_T;
typedef enum _FAT_STATE
{
FAT_NORMAL_STATE = 0,
FAT_TRAINING_STATE = 1,
}FAT_STATE_E, *PFAT_STATE_E;
typedef enum _ANT_DIV_TYPE
{
NO_ANTDIV = 0xFF,
CG_TRX_HW_ANTDIV = 0x01,
CGCS_RX_HW_ANTDIV = 0x02,
FIXED_HW_ANTDIV = 0x03,
CG_TRX_SMART_ANTDIV = 0x04,
CGCS_RX_SW_ANTDIV = 0x05,
}ANT_DIV_TYPE_E, *PANT_DIV_TYPE_E;
//
// 2011/09/22 MH Copy from SD4 defined structure. We use to support PHY DM integration.
//
#if(DM_ODM_SUPPORT_TYPE & ODM_MP)
#if (RT_PLATFORM != PLATFORM_LINUX)
typedef
#endif
struct DM_Out_Source_Dynamic_Mechanism_Structure
#else// for AP,ADSL,CE Team
typedef struct DM_Out_Source_Dynamic_Mechanism_Structure
#endif
{
//RT_TIMER FastAntTrainingTimer;
//
// Add for different team use temporarily
//
PADAPTER Adapter; // For CE/NIC team
prtl8192cd_priv priv; // For AP/ADSL team
// WHen you use Adapter or priv pointer, you must make sure the pointer is ready.
BOOLEAN odm_ready;
#if(DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
rtl8192cd_priv fake_priv;
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
// ADSL_AP_BUILD_WORKAROUND
ADAPTER fake_adapter;
#endif
u8Byte DebugComponents;
u4Byte DebugLevel;
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//
BOOLEAN bCckHighPower;
u1Byte RFPathRxEnable; // ODM_CMNINFO_RFPATH_ENABLE
u1Byte ControlChannel;
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//
//--------REMOVED COMMON INFO----------//
//u1Byte PseudoMacPhyMode;
//BOOLEAN *BTCoexist;
//BOOLEAN PseudoBtCoexist;
//u1Byte OPMode;
//BOOLEAN bAPMode;
//BOOLEAN bClientMode;
//BOOLEAN bAdHocMode;
//BOOLEAN bSlaveOfDMSP;
//--------REMOVED COMMON INFO----------//
//1 COMMON INFORMATION
//
// Init Value
//
//-----------HOOK BEFORE REG INIT-----------//
// ODM Platform info AP/ADSL/CE/MP = 1/2/3/4
u1Byte SupportPlatform;
// ODM Support Ability DIG/RATR/TX_PWR_TRACK/ <20>K<EFBFBD>K = 1/2/3/<2F>K
u4Byte SupportAbility;
// ODM PCIE/USB/SDIO/GSPI = 0/1/2/3
u1Byte SupportInterface;
// ODM composite or independent. Bit oriented/ 92C+92D+ .... or any other type = 1/2/3/...
u4Byte SupportICType;
// Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/...
u1Byte CutVersion;
// Fab Version TSMC/UMC = 0/1
u1Byte FabVersion;
// RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/...
u1Byte RFType;
// Board Type Normal/HighPower/MiniCard/SLIM/Combo/... = 0/1/2/3/4/...
u1Byte BoardType;
// with external LNA NO/Yes = 0/1
u1Byte ExtLNA;
// with external PA NO/Yes = 0/1
u1Byte ExtPA;
// with external TRSW NO/Yes = 0/1
u1Byte ExtTRSW;
u1Byte PatchID; //Customer ID
BOOLEAN bInHctTest;
BOOLEAN bWIFITest;
BOOLEAN bDualMacSmartConcurrent;
u4Byte BK_SupportAbility;
u1Byte AntDivType;
//-----------HOOK BEFORE REG INIT-----------//
//
// Dynamic Value
//
//--------- POINTER REFERENCE-----------//
u1Byte u1Byte_temp;
BOOLEAN BOOLEAN_temp;
PADAPTER PADAPTER_temp;
// MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2
u1Byte *pMacPhyMode;
//TX Unicast byte count
u8Byte *pNumTxBytesUnicast;
//RX Unicast byte count
u8Byte *pNumRxBytesUnicast;
// Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3
u1Byte *pWirelessMode; //ODM_WIRELESS_MODE_E
// Frequence band 2.4G/5G = 0/1
u1Byte *pBandType;
// Secondary channel offset don't_care/below/above = 0/1/2
u1Byte *pSecChOffset;
// Security mode Open/WEP/AES/TKIP = 0/1/2/3
u1Byte *pSecurity;
// BW info 20M/40M/80M = 0/1/2
u1Byte *pBandWidth;
// Central channel location Ch1/Ch2/....
u1Byte *pChannel; //central channel number
// Common info for 92D DMSP
BOOLEAN *pbGetValueFromOtherMac;
PADAPTER *pBuddyAdapter;
BOOLEAN *pbMasterOfDMSP; //MAC0: master, MAC1: slave
// Common info for Status
BOOLEAN *pbScanInProcess;
BOOLEAN *pbPowerSaving;
// CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E.
u1Byte *pOnePathCCA;
//pMgntInfo->AntennaTest
u1Byte *pAntennaTest;
BOOLEAN *pbNet_closed;
//--------- POINTER REFERENCE-----------//
//
//------------CALL BY VALUE-------------//
BOOLEAN bLinkInProcess;
BOOLEAN bWIFI_Direct;
BOOLEAN bWIFI_Display;
BOOLEAN bLinked;
BOOLEAN bsta_state;
u1Byte RSSI_Min;
u1Byte InterfaceIndex; // Add for 92D dual MAC: 0--Mac0 1--Mac1
BOOLEAN bIsMPChip;
BOOLEAN bOneEntryOnly;
// Common info for BTDM
BOOLEAN bBtDisabled; // BT is disabled
BOOLEAN bBtConnectProcess; // BT HS is under connection progress.
u1Byte btHsRssi; // BT HS mode wifi rssi value.
BOOLEAN bBtHsOperation; // BT HS mode is under progress
u1Byte btHsDigVal; // use BT rssi to decide the DIG value
BOOLEAN bBtDisableEdcaTurbo; // Under some condition, don't enable the EDCA Turbo
BOOLEAN bBtLimitedDig; // BT is busy.
//------------CALL BY VALUE-------------//
u1Byte RSSI_A;
u1Byte RSSI_B;
u8Byte RSSI_TRSW;
u8Byte RSSI_TRSW_H;
u8Byte RSSI_TRSW_L;
u8Byte RSSI_TRSW_iso;
u1Byte RxRate;
BOOLEAN StopDIG;
u1Byte TxRate;
u1Byte LinkedInterval;
u1Byte preChannel;
u4Byte TxagcOffsetValueA;
BOOLEAN IsTxagcOffsetPositiveA;
u4Byte TxagcOffsetValueB;
BOOLEAN IsTxagcOffsetPositiveB;
u8Byte lastTxOkCnt;
u8Byte lastRxOkCnt;
u4Byte BbSwingOffsetA;
BOOLEAN IsBbSwingOffsetPositiveA;
u4Byte BbSwingOffsetB;
BOOLEAN IsBbSwingOffsetPositiveB;
s1Byte TH_L2H_ini;
s1Byte TH_EDCCA_HL_diff;
u4Byte IGI_Base;
u4Byte IGI_target;
BOOLEAN ForceEDCCA;
u1Byte AdapEn_RSSI;
u1Byte AntType;
u1Byte antdiv_rssi;
u1Byte antdiv_period;
u4Byte Force_TH_H;
u4Byte Force_TH_L;
u1Byte IGI_LowerBound;
//2 Define STA info.
// _ODM_STA_INFO
// 2012/01/12 MH For MP, we need to reduce one array pointer for default port.??
PSTA_INFO_T pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
#if (RATE_ADAPTIVE_SUPPORT == 1)
u2Byte CurrminRptTime;
ODM_RA_INFO_T RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; //Use MacID as array index. STA MacID=0, VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} //YJ,add,120119
#endif
//
// 2012/02/14 MH Add to share 88E ra with other SW team.
// We need to colelct all support abilit to a proper area.
//
BOOLEAN RaSupport88E;
// Define ...........
// Latest packet phy info (ODM write)
ODM_PHY_DBG_INFO_T PhyDbgInfo;
//PHY_INFO_88E PhyInfo;
// Latest packet phy info (ODM write)
ODM_MAC_INFO *pMacInfo;
//MAC_INFO_88E MacInfo;
// Different Team independt structure??
//
//TX_RTP_CMN TX_retrpo;
//TX_RTP_88E TX_retrpo;
//TX_RTP_8195 TX_retrpo;
//
//ODM Structure
//
FAT_T DM_FatTable;
DIG_T DM_DigTable;
PS_T DM_PSTable;
Pri_CCA_T DM_PriCCA;
RXHP_T DM_RXHP_Table;
FALSE_ALARM_STATISTICS FalseAlmCnt;
FALSE_ALARM_STATISTICS FlaseAlmCntBuddyAdapter;
//#ifdef CONFIG_ANTENNA_DIVERSITY
SWAT_T DM_SWAT_Table;
BOOLEAN RSSI_test;
//#endif
#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
//Path Div Struct
PATHDIV_PARA pathIQK;
#endif
EDCA_T DM_EDCA_Table;
u4Byte WMMEDCA_BE;
// Copy from SD4 structure
//
// ==================================================
//
//common
//u1Byte DM_Type;
//u1Byte PSD_Report_RXHP[80]; // Add By Gary
//u1Byte PSD_func_flag; // Add By Gary
//for DIG
//u1Byte bDMInitialGainEnable;
//u1Byte binitialized; // for dm_initial_gain_Multi_STA use.
//for Antenna diversity
//u8 AntDivCfg;// 0:OFF , 1:ON, 2:by efuse
//PSTA_INFO_T RSSI_target;
BOOLEAN *pbDriverStopped;
BOOLEAN *pbDriverIsGoingToPnpSetPowerSleep;
BOOLEAN *pinit_adpt_in_progress;
//PSD
BOOLEAN bUserAssignLevel;
RT_TIMER PSDTimer;
u1Byte RSSI_BT; //come from BT
BOOLEAN bPSDinProcess;
BOOLEAN bDMInitialGainEnable;
//for rate adaptive, in fact, 88c/92c fw will handle this
u1Byte bUseRAMask;
ODM_RATE_ADAPTIVE RateAdaptive;
ODM_RF_CAL_T RFCalibrateInfo;
//
// TX power tracking
//
u1Byte BbSwingIdxOfdm;
u1Byte BbSwingIdxOfdmCurrent;
u1Byte BbSwingIdxOfdmBase;
BOOLEAN BbSwingFlagOfdm;
u1Byte BbSwingIdxCck;
u1Byte BbSwingIdxCckCurrent;
u1Byte BbSwingIdxCckBase;
u1Byte DefaultOfdmIndex;
u1Byte DefaultCckIndex;
BOOLEAN BbSwingFlagCck;
u1Byte *mp_mode;
//
// ODM system resource.
//
// ODM relative time.
RT_TIMER PathDivSwitchTimer;
//2011.09.27 add for Path Diversity
RT_TIMER CCKPathDiversityTimer;
RT_TIMER FastAntTrainingTimer;
// ODM relative workitem.
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
#if USE_WORKITEM
RT_WORK_ITEM PathDivSwitchWorkitem;
RT_WORK_ITEM CCKPathDiversityWorkitem;
RT_WORK_ITEM FastAntTrainingWorkitem;
#endif
#endif
#if(DM_ODM_SUPPORT_TYPE & ODM_MP)
#if (RT_PLATFORM != PLATFORM_LINUX)
} DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure
#else
};
#endif
#else// for AP,ADSL,CE Team
} DM_ODM_T, *PDM_ODM_T; // DM_Dynamic_Mechanism_Structure
#endif
#if 1 //92c-series
#define ODM_RF_PATH_MAX 2
#else //jaguar - series
#define ODM_RF_PATH_MAX 4
#endif
typedef enum _ODM_RF_RADIO_PATH {
ODM_RF_PATH_A = 0, //Radio Path A
ODM_RF_PATH_B = 1, //Radio Path B
ODM_RF_PATH_C = 2, //Radio Path C
ODM_RF_PATH_D = 3, //Radio Path D
// ODM_RF_PATH_MAX, //Max RF number 90 support
} ODM_RF_RADIO_PATH_E, *PODM_RF_RADIO_PATH_E;
typedef enum _ODM_RF_CONTENT{
odm_radioa_txt = 0x1000,
odm_radiob_txt = 0x1001,
odm_radioc_txt = 0x1002,
odm_radiod_txt = 0x1003
} ODM_RF_CONTENT;
typedef enum _ODM_BB_Config_Type{
CONFIG_BB_PHY_REG,
CONFIG_BB_AGC_TAB,
CONFIG_BB_AGC_TAB_2G,
CONFIG_BB_AGC_TAB_5G,
CONFIG_BB_PHY_REG_PG,
} ODM_BB_Config_Type, *PODM_BB_Config_Type;
// Status code
#if (DM_ODM_SUPPORT_TYPE != ODM_MP)
typedef enum _RT_STATUS{
RT_STATUS_SUCCESS,
RT_STATUS_FAILURE,
RT_STATUS_PENDING,
RT_STATUS_RESOURCE,
RT_STATUS_INVALID_CONTEXT,
RT_STATUS_INVALID_PARAMETER,
RT_STATUS_NOT_SUPPORT,
RT_STATUS_OS_API_FAILED,
}RT_STATUS,*PRT_STATUS;
#endif // end of RT_STATUS definition
#ifdef REMOVE_PACK
#pragma pack()
#endif
//#include "odm_function.h"
//3===========================================================
//3 DIG
//3===========================================================
typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
{
DIG_TYPE_THRESH_HIGH = 0,
DIG_TYPE_THRESH_LOW = 1,
DIG_TYPE_BACKOFF = 2,
DIG_TYPE_RX_GAIN_MIN = 3,
DIG_TYPE_RX_GAIN_MAX = 4,
DIG_TYPE_ENABLE = 5,
DIG_TYPE_DISABLE = 6,
DIG_OP_TYPE_MAX
}DM_DIG_OP_E;
/*
typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
{
CCK_PD_STAGE_LowRssi = 0,
CCK_PD_STAGE_HighRssi = 1,
CCK_PD_STAGE_MAX = 3,
}DM_CCK_PDTH_E;
typedef enum tag_DIG_EXT_PORT_ALGO_Definition
{
DIG_EXT_PORT_STAGE_0 = 0,
DIG_EXT_PORT_STAGE_1 = 1,
DIG_EXT_PORT_STAGE_2 = 2,
DIG_EXT_PORT_STAGE_3 = 3,
DIG_EXT_PORT_STAGE_MAX = 4,
}DM_DIG_EXT_PORT_ALG_E;
typedef enum tag_DIG_Connect_Definition
{
DIG_STA_DISCONNECT = 0,
DIG_STA_CONNECT = 1,
DIG_STA_BEFORE_CONNECT = 2,
DIG_MultiSTA_DISCONNECT = 3,
DIG_MultiSTA_CONNECT = 4,
DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;
#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}
#define DM_MultiSTA_InitGainChangeNotify_CONNECT(_ADAPTER) \
DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_CONNECT)
#define DM_MultiSTA_InitGainChangeNotify_DISCONNECT(_ADAPTER) \
DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_DISCONNECT)
*/
#define DM_DIG_THRESH_HIGH 40
#define DM_DIG_THRESH_LOW 35
#define DM_FALSEALARM_THRESH_LOW 400
#define DM_FALSEALARM_THRESH_HIGH 1000
#define DM_DIG_MAX_NIC 0x4A
#define DM_DIG_MIN_NIC 0x1e //0x22//0x1c
#define DM_DIG_MAX_AP 0x32
#define DM_DIG_MIN_AP 0x20
#define DM_DIG_MAX_NIC_HP 0x46
#define DM_DIG_MIN_NIC_HP 0x2e
#define DM_DIG_MAX_AP_HP 0x42
#define DM_DIG_MIN_AP_HP 0x30
//vivi 92c&92d has different definition, 20110504
//this is for 92c
#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
#define DM_DIG_FA_TH0 0x80//0x20
#else
#define DM_DIG_FA_TH0 0x200//0x20
#endif
#define DM_DIG_FA_TH1 0x300//0x100
#define DM_DIG_FA_TH2 0x400//0x200
//this is for 92d
#define DM_DIG_FA_TH0_92D 0x100
#define DM_DIG_FA_TH1_92D 0x400
#define DM_DIG_FA_TH2_92D 0x600
#define DM_DIG_BACKOFF_MAX 12
#define DM_DIG_BACKOFF_MIN -4
#define DM_DIG_BACKOFF_DEFAULT 10
//3===========================================================
//3 AGC RX High Power Mode
//3===========================================================
#define LNA_Low_Gain_1 0x64
#define LNA_Low_Gain_2 0x5A
#define LNA_Low_Gain_3 0x58
#define FA_RXHP_TH1 5000
#define FA_RXHP_TH2 1500
#define FA_RXHP_TH3 800
#define FA_RXHP_TH4 600
#define FA_RXHP_TH5 500
//3===========================================================
//3 EDCA
//3===========================================================
//3===========================================================
//3 Dynamic Tx Power
//3===========================================================
//Dynamic Tx Power Control Threshold
#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
#define TX_POWER_NEAR_FIELD_THRESH_AP 0x3F
#define TxHighPwrLevel_Normal 0
#define TxHighPwrLevel_Level1 1
#define TxHighPwrLevel_Level2 2
#define TxHighPwrLevel_BT1 3
#define TxHighPwrLevel_BT2 4
#define TxHighPwrLevel_15 5
#define TxHighPwrLevel_35 6
#define TxHighPwrLevel_50 7
#define TxHighPwrLevel_70 8
#define TxHighPwrLevel_100 9
//3===========================================================
//3 Tx Power Tracking
//3===========================================================
#if 0 //mask this, since these have been defined in typdef.h, vivi
#define OFDM_TABLE_SIZE 37
#define OFDM_TABLE_SIZE_92D 43
#define CCK_TABLE_SIZE 33
#endif
//3===========================================================
//3 Rate Adaptive
//3===========================================================
#define DM_RATR_STA_INIT 0
#define DM_RATR_STA_HIGH 1
#define DM_RATR_STA_MIDDLE 2
#define DM_RATR_STA_LOW 3
//3===========================================================
//3 BB Power Save
//3===========================================================
typedef enum tag_1R_CCA_Type_Definition
{
CCA_1R =0,
CCA_2R = 1,
CCA_MAX = 2,
}DM_1R_CCA_E;
typedef enum tag_RF_Type_Definition
{
RF_Save =0,
RF_Normal = 1,
RF_MAX = 2,
}DM_RF_E;
//3===========================================================
//3 Antenna Diversity
//3===========================================================
typedef enum tag_SW_Antenna_Switch_Definition
{
Antenna_A = 1,
Antenna_B = 2,
Antenna_MAX = 3,
}DM_SWAS_E;
// Maximal number of antenna detection mechanism needs to perform, added by Roger, 2011.12.28.
#define MAX_ANTENNA_DETECTION_CNT 10
//
// Extern Global Variables.
//
#define OFDM_TABLE_SIZE_92C 37
#define OFDM_TABLE_SIZE_92D 43
#define CCK_TABLE_SIZE 33
extern u4Byte OFDMSwingTable[OFDM_TABLE_SIZE_92D];
extern u1Byte CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
extern u1Byte CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];
//
// check Sta pointer valid or not
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define IS_STA_VALID(pSta) (pSta && pSta->expire_to)
#elif (DM_ODM_SUPPORT_TYPE & ODM_MP)
#define IS_STA_VALID(pSta) (pSta && pSta->bUsed)
#else
#define IS_STA_VALID(pSta) (pSta)
#endif
// 20100514 Joseph: Add definition for antenna switching test after link.
// This indicates two different the steps.
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
VOID ODM_Write_DIG(IN PDM_ODM_T pDM_Odm, IN u1Byte CurrentIGI);
VOID ODM_Write_CCK_CCA_Thres(IN PDM_ODM_T pDM_Odm, IN u1Byte CurCCK_CCAThres);
VOID
ODM_SetAntenna(
IN PDM_ODM_T pDM_Odm,
IN u1Byte Antenna);
#define dm_RF_Saving ODM_RF_Saving
void ODM_RF_Saving( IN PDM_ODM_T pDM_Odm,
IN u1Byte bForceInNormal );
#define SwAntDivRestAfterLink ODM_SwAntDivRestAfterLink
VOID ODM_SwAntDivRestAfterLink( IN PDM_ODM_T pDM_Odm);
#define dm_CheckTXPowerTracking ODM_TXPowerTrackingCheck
VOID
ODM_TXPowerTrackingCheck(
IN PDM_ODM_T pDM_Odm
);
BOOLEAN
ODM_RAStateCheck(
IN PDM_ODM_T pDM_Odm,
IN s4Byte RSSI,
IN BOOLEAN bForceUpdate,
OUT pu1Byte pRATRState
);
#if(DM_ODM_SUPPORT_TYPE & (ODM_MP|ODM_AP|ODM_ADSL))
//============================================================
// function prototype
//============================================================
//#define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh
//void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter,
// IN INT32 DM_Type,
// IN INT32 DM_Value);
VOID
ODM_ChangeDynamicInitGainThresh(
IN PDM_ODM_T pDM_Odm,
IN u4Byte DM_Type,
IN u4Byte DM_Value
);
BOOLEAN
ODM_CheckPowerStatus(
IN PADAPTER Adapter
);
#if (DM_ODM_SUPPORT_TYPE != ODM_ADSL)
VOID
ODM_RateAdaptiveStateApInit(
IN PADAPTER Adapter ,
IN PRT_WLAN_STA pEntry
);
#endif
#define AP_InitRateAdaptiveState ODM_RateAdaptiveStateApInit
#if(DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#ifdef WIFI_WMM
VOID
ODM_IotEdcaSwitch(
IN PDM_ODM_T pDM_Odm,
IN unsigned char enable
);
#endif
BOOLEAN
ODM_ChooseIotMainSTA(
IN PDM_ODM_T pDM_Odm,
IN PSTA_INFO_T pstat
);
#endif
#if(DM_ODM_SUPPORT_TYPE==ODM_AP)
#ifdef HW_ANT_SWITCH
u1Byte
ODM_Diversity_AntennaSelect(
IN PDM_ODM_T pDM_Odm,
IN u1Byte *data
);
#endif
#endif
#define SwAntDivResetBeforeLink ODM_SwAntDivResetBeforeLink
VOID ODM_SwAntDivResetBeforeLink(IN PDM_ODM_T pDM_Odm);
//#define SwAntDivCheckBeforeLink8192C ODM_SwAntDivCheckBeforeLink8192C
#define SwAntDivCheckBeforeLink ODM_SwAntDivCheckBeforeLink8192C
BOOLEAN
ODM_SwAntDivCheckBeforeLink8192C(
IN PDM_ODM_T pDM_Odm
);
#endif
#define dm_SWAW_RSSI_Check ODM_SwAntDivChkPerPktRssi
VOID ODM_SwAntDivChkPerPktRssi(
IN PDM_ODM_T pDM_Odm,
IN u1Byte StationID,
IN PODM_PHY_INFO_T pPhyInfo
);
#if((DM_ODM_SUPPORT_TYPE==ODM_MP)||(DM_ODM_SUPPORT_TYPE==ODM_CE))
u4Byte ConvertTo_dB(u4Byte Value);
u4Byte
GetPSDData(
PDM_ODM_T pDM_Odm,
unsigned int point,
u1Byte initial_gain_psd);
#endif
#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
VOID
odm_DIGbyRSSI_LPS(
IN PDM_ODM_T pDM_Odm
);
u4Byte ODM_Get_Rate_Bitmap(
IN PDM_ODM_T pDM_Odm,
IN u4Byte macid,
IN u4Byte ra_mask,
IN u1Byte rssi_level);
#endif
#if(DM_ODM_SUPPORT_TYPE & (ODM_MP))
#define dm_PSDMonitorCallback odm_PSDMonitorCallback
VOID odm_PSDMonitorCallback(PRT_TIMER pTimer);
VOID
odm_PSDMonitorWorkItemCallback(
IN PVOID pContext
);
VOID
PatchDCTone(
IN PDM_ODM_T pDM_Odm,
pu4Byte PSD_report,
u1Byte initial_gain_psd
);
VOID
ODM_PSDMonitor(
IN PDM_ODM_T pDM_Odm
);
VOID odm_PSD_Monitor(PDM_ODM_T pDM_Odm);
VOID odm_PSDMonitorInit(PDM_ODM_T pDM_Odm);
VOID
ODM_PSDDbgControl(
IN PADAPTER Adapter,
IN u4Byte mode,
IN u4Byte btRssi
);
#endif // DM_ODM_SUPPORT_TYPE
VOID ODM_DMInit( IN PDM_ODM_T pDM_Odm);
VOID
ODM_DMWatchdog(
IN PDM_ODM_T pDM_Odm // For common use in the future
);
VOID
ODM_CmnInfoInit(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN u4Byte Value
);
VOID
ODM_CmnInfoHook(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN PVOID pValue
);
VOID
ODM_CmnInfoPtrArrayHook(
IN PDM_ODM_T pDM_Odm,
IN ODM_CMNINFO_E CmnInfo,
IN u2Byte Index,
IN PVOID pValue
);
VOID
ODM_CmnInfoUpdate(
IN PDM_ODM_T pDM_Odm,
IN u4Byte CmnInfo,
IN u8Byte Value
);
VOID
ODM_InitAllTimers(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_CancelAllTimers(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_ReleaseAllTimers(
IN PDM_ODM_T pDM_Odm
);
VOID
ODM_ResetIQKResult(
IN PDM_ODM_T pDM_Odm
);
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
VOID ODM_InitAllWorkItems(IN PDM_ODM_T pDM_Odm );
VOID ODM_FreeAllWorkItems(IN PDM_ODM_T pDM_Odm );
VOID odm_PathDivChkAntSwitch(PDM_ODM_T pDM_Odm);
VOID ODM_PathDivRestAfterLink(
IN PDM_ODM_T pDM_Odm
);
//===========================================//
// Neil Chen----2011--06--15--
//3 Path Diversity
//===========================================================
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
//#define PATHDIV_ENABLE 1
//VOID odm_PathDivChkAntSwitch(PADAPTER Adapter,u1Byte Step);
VOID ODM_PathDivRestAfterLink(
IN PDM_ODM_T pDM_Odm
);
#define dm_PathDiv_RSSI_Check ODM_PathDivChkPerPktRssi
VOID ODM_PathDivChkPerPktRssi(PADAPTER Adapter,
BOOLEAN bIsDefPort,
BOOLEAN bMatchBSSID,
PRT_WLAN_STA pEntry,
PRT_RFD pRfd );
u8Byte
PlatformDivision64(
IN u8Byte x,
IN u8Byte y
);
// 20100514 Joseph: Add definition for antenna switching test after link.
// This indicates two different the steps.
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
//====================================================
//3 PathDiV End
//====================================================
#define PathDivCheckBeforeLink8192C ODM_PathDiversityBeforeLink92C
BOOLEAN
ODM_PathDiversityBeforeLink92C(
//IN PADAPTER Adapter
IN PDM_ODM_T pDM_Odm
);
#define DM_ChangeDynamicInitGainThresh ODM_ChangeDynamicInitGainThresh
//void ODM_ChangeDynamicInitGainThresh(IN PADAPTER pAdapter,
// IN INT32 DM_Type,
// IN INT32 DM_Value);
//
VOID
ODM_CCKPathDiversityChkPerPktRssi(
PADAPTER Adapter,
BOOLEAN bIsDefPort,
BOOLEAN bMatchBSSID,
PRT_WLAN_STA pEntry,
PRT_RFD pRfd,
pu1Byte pDesc
);
typedef enum tag_DIG_Connect_Definition
{
DIG_STA_DISCONNECT = 0,
DIG_STA_CONNECT = 1,
DIG_STA_BEFORE_CONNECT = 2,
DIG_MultiSTA_DISCONNECT = 3,
DIG_MultiSTA_CONNECT = 4,
DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;
VOID
ODM_FillTXPathInTXDESC(
IN PADAPTER Adapter,
IN PRT_TCB pTcb,
IN pu1Byte pDesc
);
#define dm_SWAW_RSSI_Check ODM_SwAntDivChkPerPktRssi
//
// 2012/01/12 MH Check afapter status. Temp fix BSOD.
//
#define HAL_ADAPTER_STS_CHK(pDM_Odm)\
if (pDM_Odm->Adapter == NULL)\
{\
return;\
}\
//
// For new definition in MP temporarily fro power tracking,
//
#define odm_TXPowerTrackingDirectCall(_Adapter) \
IS_HARDWARE_TYPE_8192D(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92D(_Adapter) : \
IS_HARDWARE_TYPE_8192C(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92C(_Adapter) : \
IS_HARDWARE_TYPE_8723A(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_8723A(_Adapter) :\
odm_TXPowerTrackingCallback_ThermalMeter_8188E(_Adapter)
VOID
ODM_SetTxAntByTxInfo_88C_92D(
IN PDM_ODM_T pDM_Odm,
IN pu1Byte pDesc,
IN u1Byte macId
);
#endif // #if (DM_ODM_SUPPORT_TYPE == ODM_MP)
VOID
ODM_AntselStatistics_88C(
IN PDM_ODM_T pDM_Odm,
IN u1Byte MacId,
IN u4Byte PWDBAll,
IN BOOLEAN isCCKrate
);
#if( DM_ODM_SUPPORT_TYPE & (ODM_MP |ODM_CE))
VOID
ODM_SingleDualAntennaDefaultSetting(
IN PDM_ODM_T pDM_Odm
);
BOOLEAN
ODM_SingleDualAntennaDetection(
IN PDM_ODM_T pDM_Odm,
IN u1Byte mode
);
#endif // #if((DM_ODM_SUPPORT_TYPE==ODM_MP)||(DM_ODM_SUPPORT_TYPE==ODM_CE))
#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
void odm_dtc(PDM_ODM_T pDM_Odm);
#endif /* #if (DM_ODM_SUPPORT_TYPE == ODM_CE) */
#endif