rtl8188eu/include/drv_types.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/
/*-------------------------------------------------------------------------------

	For type defines and data structure defines

--------------------------------------------------------------------------------*/


#ifndef __DRV_TYPES_H__
#define __DRV_TYPES_H__

#include <drv_conf.h>
#include <osdep_service.h>
#include <wlan_bssdef.h>
#include <drv_types_linux.h>

enum _NIC_VERSION {

	RTL8711_NIC,
	RTL8712_NIC,
	RTL8713_NIC,
	RTL8716_NIC

};


typedef struct _ADAPTER _adapter, ADAPTER,*PADAPTER;

#ifdef CONFIG_80211N_HT
#include <rtw_ht.h>
#endif

#include <rtw_cmd.h>
#include <wlan_bssdef.h>
#include <rtw_xmit.h>
#include <rtw_recv.h>
#include <hal_intf.h>
#include <hal_com.h>
#include <rtw_qos.h>
#include <rtw_security.h>
#include <rtw_pwrctrl.h>
#include <rtw_io.h>
#include <rtw_eeprom.h>
#include <sta_info.h>
#include <rtw_mlme.h>
#include <rtw_debug.h>
#include <rtw_rf.h>
#include <rtw_event.h>
#include <rtw_led.h>
#include <rtw_mlme_ext.h>
#include <rtw_p2p.h>
#include <rtw_ap.h>

#ifdef CONFIG_DRVEXT_MODULE
#include <drvext_api.h>
#endif

#include <rtw_mp.h>

#include <rtw_br_ext.h>
#define SPEC_DEV_ID_NONE BIT(0)
#define SPEC_DEV_ID_DISABLE_HT BIT(1)
#define SPEC_DEV_ID_ENABLE_PS BIT(2)
#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)

struct specific_device_id{

	u32		flags;

	u16		idVendor;
	u16		idProduct;

};

struct registry_priv
{
	u8	chip_version;
	u8	rfintfs;
	u8	lbkmode;
	u8	hci;
	NDIS_802_11_SSID	ssid;
	u8	network_mode;	//infra, ad-hoc, auto
	u8	channel;//ad-hoc support requirement
	u8	wireless_mode;//A, B, G, auto
	u8	scan_mode;//active, passive
	u8	radio_enable;
	u8	preamble;//long, short, auto
	u8	vrtl_carrier_sense;//Enable, Disable, Auto
	u8	vcs_type;//RTS/CTS, CTS-to-self
	u16	rts_thresh;
	u16  frag_thresh;
	u8	adhoc_tx_pwr;
	u8	soft_ap;
	u8	power_mgnt;
	u8	ips_mode;
	u8	smart_ps;
	u8	long_retry_lmt;
	u8	short_retry_lmt;
	u16	busy_thresh;
	u8	ack_policy;
	u8	mp_mode;
	u8	software_encrypt;
	u8	software_decrypt;
	#ifdef CONFIG_TX_EARLY_MODE
	u8   early_mode;
	#endif
	u8	acm_method;
	  //UAPSD
	u8	wmm_enable;
	u8	uapsd_enable;
	u8	uapsd_max_sp;
	u8	uapsd_acbk_en;
	u8	uapsd_acbe_en;
	u8	uapsd_acvi_en;
	u8	uapsd_acvo_en;

	WLAN_BSSID_EX    dev_network;

#ifdef CONFIG_80211N_HT
	u8	ht_enable;
	u8	cbw40_enable;
	u8	ampdu_enable;//for tx
	u8	rx_stbc;
	u8	ampdu_amsdu;//A-MPDU Supports A-MSDU is permitted
#endif
	u8	lowrate_two_xmit;

	u8	rf_config ;
	u8	low_power ;

	u8	wifi_spec;// !turbo_mode

	u8	channel_plan;
#ifdef CONFIG_BT_COEXIST
	u8	btcoex;
	u8	bt_iso;
	u8	bt_sco;
	u8	bt_ampdu;
#endif
	bool	bAcceptAddbaReq;

	u8	antdiv_cfg;
	u8	antdiv_type;

	u8	usbss_enable;//0:disable,1:enable
	u8	hwpdn_mode;//0:disable,1:enable,2:decide by EFUSE config
	u8	hwpwrp_detect;//0:disable,1:enable

	u8	hw_wps_pbc;//0:disable,1:enable

	u8	max_roaming_times; // the max number driver will try to roaming

	u8 fw_iol; //enable iol without other concern

#ifdef CONFIG_80211D
	u8 enable80211d;
#endif

	u8 ifname[16];
	u8 if2name[16];

	u8 notch_filter;

#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
	u8 force_ant;//0 normal,1 main,2 aux
	u8 force_igi;//0 normal
#endif

};


//For registry parameters
#define RGTRY_OFT(field) ((ULONG)FIELD_OFFSET(struct registry_priv,field))
#define RGTRY_SZ(field)   sizeof(((struct registry_priv*) 0)->field)
#define BSSID_OFT(field) ((ULONG)FIELD_OFFSET(WLAN_BSSID_EX,field))
#define BSSID_SZ(field)   sizeof(((PWLAN_BSSID_EX) 0)->field)

#define MAX_CONTINUAL_URB_ERR 4

struct dvobj_priv
{
	_adapter *if1;
	_adapter *if2;

	//For 92D, DMDP have 2 interface.
	u8	InterfaceNumber;
	u8	NumInterfaces;

	//In /Out Pipe information
	int	RtInPipe[2];
	int	RtOutPipe[3];
	u8	Queue2Pipe[HW_QUEUE_ENTRY];//for out pipe mapping

	u8	irq_alloc;

/*-------- below is for SDIO INTERFACE --------*/

#ifdef INTF_DATA
	INTF_DATA intf_data;
#endif

/*-------- below is for USB INTERFACE --------*/

	u8	nr_endpoint;
	u8	ishighspeed;
	u8	RtNumInPipes;
	u8	RtNumOutPipes;
	int	ep_num[5]; //endpoint number

	int	RegUsbSS;

	_sema	usb_suspend_sema;

#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
	_mutex  usb_vendor_req_mutex;
#endif

#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
	u8 * usb_alloc_vendor_req_buf;
	u8 * usb_vendor_req_buf;
#endif

	struct usb_interface *pusbintf;
	struct usb_device *pusbdev;

	ATOMIC_T continual_urb_error;
};

static struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
{
	/* todo: get interface type from dvobj and the return the dev accordingly */
#ifdef RTW_DVOBJ_CHIP_HW_TYPE
#endif

	return &dvobj->pusbintf->dev;
}

enum _IFACE_TYPE {
	IFACE_PORT0, //mapping to port0 for C/D series chips
	IFACE_PORT1, //mapping to port1 for C/D series chip
	MAX_IFACE_PORT,
};

enum _ADAPTER_TYPE {
	PRIMARY_ADAPTER,
	SECONDARY_ADAPTER,
	MAX_ADAPTER,
};

typedef enum _DRIVER_STATE{
	DRIVER_NORMAL = 0,
	DRIVER_DISAPPEAR = 1,
	DRIVER_REPLACE_DONGLE = 2,
}DRIVER_STATE;

#ifdef CONFIG_MAC_LOOPBACK_DRIVER
typedef struct loopbackdata
{
	_sema	sema;
	_thread_hdl_ lbkthread;
	u8 bstop;
	u32 cnt;
	u16 size;
	u16 txsize;
	u8 txbuf[0x8000];
	u16 rxsize;
	u8 rxbuf[0x8000];
	u8 msg[100];

}LOOPBACKDATA, *PLOOPBACKDATA;
#endif

struct _ADAPTER{
	int	DriverState;// for disable driver using module, use dongle to replace module.
	int	pid[3];//process id from UI, 0:wps, 1:hostapd, 2:dhcpcd
	int	bDongle;//build-in module or external dongle
	u16	chip_type;
	u16	HardwareType;
	u16	interface_type;//USB,SDIO,SPI,PCI

	struct dvobj_priv *dvobj;
	struct	mlme_priv mlmepriv;
	struct	mlme_ext_priv mlmeextpriv;
	struct	cmd_priv	cmdpriv;
	struct	evt_priv	evtpriv;
	//struct	io_queue	*pio_queue;
	struct	io_priv	iopriv;
	struct	xmit_priv	xmitpriv;
	struct	recv_priv	recvpriv;
	struct	sta_priv	stapriv;
	struct	security_priv	securitypriv;
	struct	registry_priv	registrypriv;
	struct	pwrctrl_priv	pwrctrlpriv;
	struct	eeprom_priv eeprompriv;
	struct	led_priv	ledpriv;
#if defined(CONFIG_CHECK_BT_HANG) && defined(CONFIG_BT_COEXIST)
	//Check BT status for BT Hung.
	struct workqueue_struct *priv_checkbt_wq;
	struct delayed_work checkbt_work;
#endif
       struct	mp_priv	mppriv;

#ifdef CONFIG_DRVEXT_MODULE
	struct	drvext_priv	drvextpriv;
#endif

#ifdef CONFIG_AP_MODE
	struct	hostapd_priv	*phostapdpriv;
#endif

#ifdef CONFIG_P2P
	struct wifidirect_info	wdinfo;
#endif //CONFIG_P2P

	void *HalData;
	u32 hal_data_sz;
	struct hal_ops	HalFunc;

	s32	bDriverStopped;
	s32	bSurpriseRemoved;
	s32  bCardDisableWOHSM;

	u32	IsrContent;
	u32	ImrContent;

	u8	EepromAddressSize;
	u8	hw_init_completed;
	u8	bDriverIsGoingToUnload;
	u8	init_adpt_in_progress;
	u8	bHaltInProgress;

	_thread_hdl_ cmdThread;
	_thread_hdl_ evtThread;
	_thread_hdl_ xmitThread;
	_thread_hdl_ recvThread;
	void (*intf_start)(_adapter * adapter);
	void (*intf_stop)(_adapter * adapter);
	_nic_hdl pnetdev;

	// used by rtw_rereg_nd_name related function
	struct rereg_nd_name_data {
		_nic_hdl old_pnetdev;
		char old_ifname[IFNAMSIZ];
		u8 old_ips_mode;
		u8 old_bRegUseLed;
	} rereg_nd_name_priv;

	int bup;
	struct net_device_stats stats;
	struct iw_statistics iwstats;
	struct proc_dir_entry *dir_dev;// for proc directory

	int net_closed;
	u8 bFWReady;
	u8 bBTFWReady;
	u8 bReadPortCancel;
	u8 bWritePortCancel;
	u8 bRxRSSIDisplay;
	//	Added by Albert 2012/10/26
	//	The driver will show up the desired channel number when this flag is 1.
	u8 bNotifyChannelChange;
#ifdef CONFIG_P2P
	//	Added by Albert 2012/12/06
	//	The driver will show the current P2P status when the upper application reads it.
	u8 bShowGetP2PState;
#endif
#ifdef CONFIG_AUTOSUSPEND
	u8	bDisableAutosuspend;
#endif

	_adapter *pbuddy_adapter;

	_mutex *hw_init_mutex;

	_lock					br_ext_lock;
	struct nat25_network_db_entry	*nethash[NAT25_HASH_SIZE];
	int				pppoe_connection_in_progress;
	unsigned char			pppoe_addr[MACADDRLEN];
	unsigned char			scdb_mac[MACADDRLEN];
	unsigned char			scdb_ip[4];
	struct nat25_network_db_entry	*scdb_entry;
	unsigned char			br_mac[MACADDRLEN];
	unsigned char			br_ip[4];
	struct br_ext_info		ethBrExtInfo;

#ifdef CONFIG_MAC_LOOPBACK_DRIVER
	PLOOPBACKDATA ploopback;
#endif

        u8    fix_rate;

	unsigned char     in_cta_test;

};

#define adapter_to_dvobj(adapter) (adapter->dvobj)

int rtw_handle_dualmac(_adapter *adapter, bool init);

__inline static u8 *myid(struct eeprom_priv *peepriv)
{
	return (peepriv->mac_addr);
}


#endif //__DRV_TYPES_H__