rtl8188eu/include/drv_types.h

667 lines
14 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*-------------------------------------------------------------------------------
For type defines and data structure defines
--------------------------------------------------------------------------------*/
#ifndef __DRV_TYPES_H__
#define __DRV_TYPES_H__
#include <drv_conf.h>
#include <osdep_service.h>
#include <wlan_bssdef.h>
#ifdef PLATFORM_OS_XP
#include <drv_types_xp.h>
#endif
#ifdef PLATFORM_OS_CE
#include <drv_types_ce.h>
#endif
#ifdef PLATFORM_LINUX
#include <drv_types_linux.h>
#endif
enum _NIC_VERSION {
RTL8711_NIC,
RTL8712_NIC,
RTL8713_NIC,
RTL8716_NIC
};
typedef struct _ADAPTER _adapter, ADAPTER,*PADAPTER;
#ifdef CONFIG_80211N_HT
#include <rtw_ht.h>
#endif
#include <rtw_cmd.h>
#include <wlan_bssdef.h>
#include <rtw_xmit.h>
#include <rtw_recv.h>
#include <hal_intf.h>
#include <hal_com.h>
#include <rtw_qos.h>
#include <rtw_security.h>
#include <rtw_pwrctrl.h>
#include <rtw_io.h>
#include <rtw_eeprom.h>
#include <sta_info.h>
#include <rtw_mlme.h>
#include <rtw_debug.h>
#include <rtw_rf.h>
#include <rtw_event.h>
#include <rtw_led.h>
#include <rtw_mlme_ext.h>
#include <rtw_p2p.h>
#include <rtw_tdls.h>
#include <rtw_ap.h>
#ifdef CONFIG_WAPI_SUPPORT
#include <rtw_wapi.h>
#endif
#ifdef CONFIG_DRVEXT_MODULE
#include <drvext_api.h>
#endif
#ifdef CONFIG_MP_INCLUDED
#include <rtw_mp.h>
#endif
#ifdef CONFIG_BR_EXT
#include <rtw_br_ext.h>
#endif // CONFIG_BR_EXT
#ifdef CONFIG_IOCTL_CFG80211
#include "ioctl_cfg80211.h"
#endif //CONFIG_IOCTL_CFG80211
#define SPEC_DEV_ID_NONE BIT(0)
#define SPEC_DEV_ID_DISABLE_HT BIT(1)
#define SPEC_DEV_ID_ENABLE_PS BIT(2)
#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
struct specific_device_id{
u32 flags;
u16 idVendor;
u16 idProduct;
};
struct registry_priv
{
u8 chip_version;
u8 rfintfs;
u8 lbkmode;
u8 hci;
NDIS_802_11_SSID ssid;
u8 network_mode; //infra, ad-hoc, auto
u8 channel;//ad-hoc support requirement
u8 wireless_mode;//A, B, G, auto
u8 scan_mode;//active, passive
u8 radio_enable;
u8 preamble;//long, short, auto
u8 vrtl_carrier_sense;//Enable, Disable, Auto
u8 vcs_type;//RTS/CTS, CTS-to-self
u16 rts_thresh;
u16 frag_thresh;
u8 adhoc_tx_pwr;
u8 soft_ap;
u8 power_mgnt;
u8 ips_mode;
u8 smart_ps;
u8 long_retry_lmt;
u8 short_retry_lmt;
u16 busy_thresh;
u8 ack_policy;
u8 mp_mode;
u8 software_encrypt;
u8 software_decrypt;
#ifdef CONFIG_TX_EARLY_MODE
u8 early_mode;
#endif
u8 acm_method;
//UAPSD
u8 wmm_enable;
u8 uapsd_enable;
u8 uapsd_max_sp;
u8 uapsd_acbk_en;
u8 uapsd_acbe_en;
u8 uapsd_acvi_en;
u8 uapsd_acvo_en;
WLAN_BSSID_EX dev_network;
#ifdef CONFIG_80211N_HT
u8 ht_enable;
u8 cbw40_enable;
u8 ampdu_enable;//for tx
u8 rx_stbc;
u8 ampdu_amsdu;//A-MPDU Supports A-MSDU is permitted
#endif
u8 lowrate_two_xmit;
u8 rf_config ;
u8 low_power ;
u8 wifi_spec;// !turbo_mode
u8 channel_plan;
#ifdef CONFIG_BT_COEXIST
u8 btcoex;
u8 bt_iso;
u8 bt_sco;
u8 bt_ampdu;
#endif
BOOLEAN bAcceptAddbaReq;
u8 antdiv_cfg;
u8 antdiv_type;
u8 usbss_enable;//0:disable,1:enable
u8 hwpdn_mode;//0:disable,1:enable,2:decide by EFUSE config
u8 hwpwrp_detect;//0:disable,1:enable
u8 hw_wps_pbc;//0:disable,1:enable
#ifdef CONFIG_ADAPTOR_INFO_CACHING_FILE
char adaptor_info_caching_file_path[PATH_LENGTH_MAX];
#endif
#ifdef CONFIG_LAYER2_ROAMING
u8 max_roaming_times; // the max number driver will try to roaming
#endif
#ifdef CONFIG_IOL
u8 fw_iol; //enable iol without other concern
#endif
#ifdef CONFIG_DUALMAC_CONCURRENT
u8 dmsp;//0:disable,1:enable
#endif
#ifdef CONFIG_80211D
u8 enable80211d;
#endif
u8 ifname[16];
u8 if2name[16];
u8 notch_filter;
#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
u8 force_ant;//0 normal,1 main,2 aux
u8 force_igi;//0 normal
#endif
};
//For registry parameters
#define RGTRY_OFT(field) ((ULONG)FIELD_OFFSET(struct registry_priv,field))
#define RGTRY_SZ(field) sizeof(((struct registry_priv*) 0)->field)
#define BSSID_OFT(field) ((ULONG)FIELD_OFFSET(WLAN_BSSID_EX,field))
#define BSSID_SZ(field) sizeof(((PWLAN_BSSID_EX) 0)->field)
#define MAX_CONTINUAL_URB_ERR 4
#ifdef CONFIG_SDIO_HCI
#include <drv_types_sdio.h>
#define INTF_DATA SDIO_DATA
#elif defined(CONFIG_GSPI_HCI)
#include <drv_types_gspi.h>
#define INTF_DATA GSPI_DATA
#endif
struct dvobj_priv
{
_adapter *if1;
_adapter *if2;
//For 92D, DMDP have 2 interface.
u8 InterfaceNumber;
u8 NumInterfaces;
//In /Out Pipe information
int RtInPipe[2];
int RtOutPipe[3];
u8 Queue2Pipe[HW_QUEUE_ENTRY];//for out pipe mapping
u8 irq_alloc;
/*-------- below is for SDIO INTERFACE --------*/
#ifdef INTF_DATA
INTF_DATA intf_data;
#endif
/*-------- below is for USB INTERFACE --------*/
#ifdef CONFIG_USB_HCI
u8 nr_endpoint;
u8 ishighspeed;
u8 RtNumInPipes;
u8 RtNumOutPipes;
int ep_num[5]; //endpoint number
int RegUsbSS;
_sema usb_suspend_sema;
#ifdef CONFIG_USB_VENDOR_REQ_MUTEX
_mutex usb_vendor_req_mutex;
#endif
#ifdef CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
u8 * usb_alloc_vendor_req_buf;
u8 * usb_vendor_req_buf;
#endif
#ifdef PLATFORM_WINDOWS
//related device objects
PDEVICE_OBJECT pphysdevobj;//pPhysDevObj;
PDEVICE_OBJECT pfuncdevobj;//pFuncDevObj;
PDEVICE_OBJECT pnextdevobj;//pNextDevObj;
u8 nextdevstacksz;//unsigned char NextDeviceStackSize; //= (CHAR)CEdevice->pUsbDevObj->StackSize + 1;
//urb for control diescriptor request
#ifdef PLATFORM_OS_XP
struct _URB_CONTROL_DESCRIPTOR_REQUEST descriptor_urb;
PUSB_CONFIGURATION_DESCRIPTOR pconfig_descriptor;//UsbConfigurationDescriptor;
#endif
#ifdef PLATFORM_OS_CE
WCHAR active_path[MAX_ACTIVE_REG_PATH]; // adapter regpath
USB_EXTENSION usb_extension;
_nic_hdl pipehdls_r8192c[0x10];
#endif
u32 config_descriptor_len;//ULONG UsbConfigurationDescriptorLength;
#endif//PLATFORM_WINDOWS
#ifdef PLATFORM_LINUX
struct usb_interface *pusbintf;
struct usb_device *pusbdev;
#endif//PLATFORM_LINUX
#ifdef PLATFORM_FREEBSD
struct usb_interface *pusbintf;
struct usb_device *pusbdev;
#endif//PLATFORM_FREEBSD
ATOMIC_T continual_urb_error;
#endif//CONFIG_USB_HCI
/*-------- below is for PCIE INTERFACE --------*/
#ifdef CONFIG_PCI_HCI
#ifdef PLATFORM_LINUX
struct pci_dev *ppcidev;
//PCI MEM map
unsigned long pci_mem_end; /* shared mem end */
unsigned long pci_mem_start; /* shared mem start */
//PCI IO map
unsigned long pci_base_addr; /* device I/O address */
//PciBridge
struct pci_priv pcipriv;
u16 irqline;
u8 irq_enabled;
RT_ISR_CONTENT isr_content;
_lock irq_th_lock;
//ASPM
u8 const_pci_aspm;
u8 const_amdpci_aspm;
u8 const_hwsw_rfoff_d3;
u8 const_support_pciaspm;
// pci-e bridge */
u8 const_hostpci_aspm_setting;
// pci-e device */
u8 const_devicepci_aspm_setting;
u8 b_support_aspm; // If it supports ASPM, Offset[560h] = 0x40, otherwise Offset[560h] = 0x00.
u8 b_support_backdoor;
u8 bdma64;
#endif//PLATFORM_LINUX
#endif//CONFIG_PCI_HCI
};
#ifdef PLATFORM_LINUX
static struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
{
/* todo: get interface type from dvobj and the return the dev accordingly */
#ifdef RTW_DVOBJ_CHIP_HW_TYPE
#endif
#ifdef CONFIG_USB_HCI
return &dvobj->pusbintf->dev;
#endif
#ifdef CONFIG_SDIO_HCI
return &dvobj->intf_data.func->dev;
#endif
#ifdef CONFIG_GSPI_HCI
return &dvobj->intf_data.func->dev;
#endif
#ifdef CONFIG_PCI_HCI
return &dvobj->ppcidev->dev;
#endif
}
#endif
enum _IFACE_TYPE {
IFACE_PORT0, //mapping to port0 for C/D series chips
IFACE_PORT1, //mapping to port1 for C/D series chip
MAX_IFACE_PORT,
};
enum _ADAPTER_TYPE {
PRIMARY_ADAPTER,
SECONDARY_ADAPTER,
MAX_ADAPTER,
};
#ifdef CONFIG_CONCURRENT_MODE
struct co_data_priv{
//george@20120518
//current operating channel/bw/ch_offset
//save the correct ch/bw/ch_offset whatever the inputted values are
//when calling set_channel_bwmode() at concurrent mode
//for debug check or reporting to layer app (such as wpa_supplicant for nl80211)
u8 co_ch;
u8 co_bw;
u8 co_ch_offset;
u8 rsvd;
};
#endif //CONFIG_CONCURRENT_MODE
typedef enum _DRIVER_STATE{
DRIVER_NORMAL = 0,
DRIVER_DISAPPEAR = 1,
DRIVER_REPLACE_DONGLE = 2,
}DRIVER_STATE;
#ifdef CONFIG_INTEL_PROXIM
struct proxim {
bool proxim_support;
bool proxim_on;
void *proximity_priv;
int (*proxim_rx)(_adapter *padapter,
union recv_frame *precv_frame);
u8 (*proxim_get_var)(_adapter* padapter, u8 type);
};
#endif //CONFIG_INTEL_PROXIM
#ifdef CONFIG_MAC_LOOPBACK_DRIVER
typedef struct loopbackdata
{
_sema sema;
_thread_hdl_ lbkthread;
u8 bstop;
u32 cnt;
u16 size;
u16 txsize;
u8 txbuf[0x8000];
u16 rxsize;
u8 rxbuf[0x8000];
u8 msg[100];
}LOOPBACKDATA, *PLOOPBACKDATA;
#endif
struct _ADAPTER{
int DriverState;// for disable driver using module, use dongle to replace module.
int pid[3];//process id from UI, 0:wps, 1:hostapd, 2:dhcpcd
int bDongle;//build-in module or external dongle
u16 chip_type;
u16 HardwareType;
u16 interface_type;//USB,SDIO,SPI,PCI
struct dvobj_priv *dvobj;
struct mlme_priv mlmepriv;
struct mlme_ext_priv mlmeextpriv;
struct cmd_priv cmdpriv;
struct evt_priv evtpriv;
//struct io_queue *pio_queue;
struct io_priv iopriv;
struct xmit_priv xmitpriv;
struct recv_priv recvpriv;
struct sta_priv stapriv;
struct security_priv securitypriv;
struct registry_priv registrypriv;
struct pwrctrl_priv pwrctrlpriv;
struct eeprom_priv eeprompriv;
struct led_priv ledpriv;
#if defined(CONFIG_CHECK_BT_HANG) && defined(CONFIG_BT_COEXIST)
//Check BT status for BT Hung.
struct workqueue_struct *priv_checkbt_wq;
struct delayed_work checkbt_work;
#endif
#ifdef CONFIG_MP_INCLUDED
struct mp_priv mppriv;
#endif
#ifdef CONFIG_DRVEXT_MODULE
struct drvext_priv drvextpriv;
#endif
#ifdef CONFIG_AP_MODE
struct hostapd_priv *phostapdpriv;
#endif
#ifdef CONFIG_IOCTL_CFG80211
#ifdef CONFIG_P2P
struct cfg80211_wifidirect_info cfg80211_wdinfo;
#endif //CONFIG_P2P
#endif //CONFIG_IOCTL_CFG80211
#ifdef CONFIG_P2P
struct wifidirect_info wdinfo;
#endif //CONFIG_P2P
#ifdef CONFIG_TDLS
struct tdls_info tdlsinfo;
#endif //CONFIG_TDLS
#ifdef CONFIG_WAPI_SUPPORT
u8 WapiSupport;
RT_WAPI_T wapiInfo;
#endif
#ifdef CONFIG_WFD
struct wifi_display_info wfd_info;
#endif //CONFIG_WFD
PVOID HalData;
u32 hal_data_sz;
struct hal_ops HalFunc;
s32 bDriverStopped;
s32 bSurpriseRemoved;
s32 bCardDisableWOHSM;
u32 IsrContent;
u32 ImrContent;
u8 EepromAddressSize;
u8 hw_init_completed;
u8 bDriverIsGoingToUnload;
u8 init_adpt_in_progress;
u8 bHaltInProgress;
_thread_hdl_ cmdThread;
_thread_hdl_ evtThread;
_thread_hdl_ xmitThread;
_thread_hdl_ recvThread;
#ifndef PLATFORM_LINUX
NDIS_STATUS (*dvobj_init)(struct dvobj_priv *dvobj);
void (*dvobj_deinit)(struct dvobj_priv *dvobj);
#endif
void (*intf_start)(_adapter * adapter);
void (*intf_stop)(_adapter * adapter);
#ifdef PLATFORM_WINDOWS
_nic_hdl hndis_adapter;//hNdisAdapter(NDISMiniportAdapterHandle);
_nic_hdl hndis_config;//hNdisConfiguration;
NDIS_STRING fw_img;
u32 NdisPacketFilter;
u8 MCList[MAX_MCAST_LIST_NUM][6];
u32 MCAddrCount;
#endif //end of PLATFORM_WINDOWS
#ifdef PLATFORM_LINUX
_nic_hdl pnetdev;
// used by rtw_rereg_nd_name related function
struct rereg_nd_name_data {
_nic_hdl old_pnetdev;
char old_ifname[IFNAMSIZ];
u8 old_ips_mode;
u8 old_bRegUseLed;
} rereg_nd_name_priv;
int bup;
struct net_device_stats stats;
struct iw_statistics iwstats;
struct proc_dir_entry *dir_dev;// for proc directory
#ifdef CONFIG_IOCTL_CFG80211
struct wireless_dev *rtw_wdev;
#endif //CONFIG_IOCTL_CFG80211
#endif //end of PLATFORM_LINUX
#ifdef PLATFORM_FREEBSD
_nic_hdl pifp;
int bup;
_lock glock;
#endif //PLATFORM_FREEBSD
int net_closed;
u8 bFWReady;
u8 bBTFWReady;
u8 bReadPortCancel;
u8 bWritePortCancel;
u8 bRxRSSIDisplay;
// Added by Albert 2012/10/26
// The driver will show up the desired channel number when this flag is 1.
u8 bNotifyChannelChange;
#ifdef CONFIG_P2P
// Added by Albert 2012/12/06
// The driver will show the current P2P status when the upper application reads it.
u8 bShowGetP2PState;
#endif
#ifdef CONFIG_AUTOSUSPEND
u8 bDisableAutosuspend;
#endif
_adapter *pbuddy_adapter;
_mutex *hw_init_mutex;
#if defined(CONFIG_CONCURRENT_MODE) || defined(CONFIG_DUALMAC_CONCURRENT)
u8 isprimary; //is primary adapter or not
u8 adapter_type;
u8 iface_type; //interface port type
//for global synchronization
_mutex *ph2c_fwcmd_mutex;
_mutex *psetch_mutex;
_mutex *psetbw_mutex;
struct co_data_priv *pcodatapriv;//data buffer shared among interfaces
#endif
#ifdef CONFIG_DUALMAC_CONCURRENT
u8 DualMacConcurrent; // 1: DMSP 0:DMDP
#endif
#ifdef CONFIG_BR_EXT
_lock br_ext_lock;
//unsigned int macclone_completed;
struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE];
int pppoe_connection_in_progress;
unsigned char pppoe_addr[MACADDRLEN];
unsigned char scdb_mac[MACADDRLEN];
unsigned char scdb_ip[4];
struct nat25_network_db_entry *scdb_entry;
unsigned char br_mac[MACADDRLEN];
unsigned char br_ip[4];
struct br_ext_info ethBrExtInfo;
#endif // CONFIG_BR_EXT
#ifdef CONFIG_INTEL_PROXIM
/* intel Proximity, should be alloc mem
* in intel Proximity module and can only
* be used in intel Proximity mode */
struct proxim proximity;
#endif //CONFIG_INTEL_PROXIM
#ifdef CONFIG_MAC_LOOPBACK_DRIVER
PLOOPBACKDATA ploopback;
#endif
u8 fix_rate;
unsigned char in_cta_test;
};
#define adapter_to_dvobj(adapter) (adapter->dvobj)
int rtw_handle_dualmac(_adapter *adapter, bool init);
__inline static u8 *myid(struct eeprom_priv *peepriv)
{
return (peepriv->mac_addr);
}
#endif //__DRV_TYPES_H__