skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-10 15:39:38 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/include/rtl8192d_spec.h

1762 lines
53 KiB
C
Raw Normal View History

rtl8188eu: Place driver rtl8188EUS_rtl8189ES_linux_v4.1.8_9499.20131104 in branch v4.1.8_9499 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2014-12-11 21:15:04 +00:00
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8192D_SPEC_H__
#define __RTL8192D_SPEC_H__
#include <drv_conf.h>
//============================================================
// 8192D Regsiter offset definition
//============================================================
//============================================================
//
//============================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
#define REG_SYS_ISO_CTRL 0x0000
#define REG_SYS_FUNC_EN 0x0002
#define REG_APS_FSMCO 0x0004
#define REG_SYS_CLKR 0x0008
#define REG_9346CR 0x000A
#define REG_EE_VPD 0x000C
#define REG_AFE_MISC 0x0010
#define REG_SPS0_CTRL 0x0011
#define REG_POWER_OFF_IN_PROCESS 0x0017
#define REG_SPS_OCP_CFG 0x0018
#define REG_RSV_CTRL 0x001C
#define REG_RF_CTRL 0x001F
#define REG_LDOA15_CTRL 0x0020
#define REG_LDOV12D_CTRL 0x0021
#define REG_LDOHCI12_CTRL 0x0022
#define REG_LPLDO_CTRL 0x0023
#define REG_AFE_XTAL_CTRL 0x0024
#define REG_AFE_PLL_CTRL 0x0028
#define REG_MAC_PHY_CTRL 0x002c //for 92d, DMDP,SMSP,DMSP contrl
#define REG_EFUSE_CTRL 0x0030
#define REG_EFUSE_TEST 0x0034
#define REG_PWR_DATA 0x0038
#define REG_CAL_TIMER 0x003C
#define REG_ACLK_MON 0x003E
#define REG_GPIO_MUXCFG 0x0040
//#define REG_GPIO_MUXCFG 0x0041
#define REG_GPIO_IO_SEL 0x0042
#define REG_MAC_PINMUX_CFG 0x0043
#define REG_GPIO_PIN_CTRL 0x0044
#define REG_GPIO_INTM 0x0048
#define REG_LEDCFG0 0x004C
#define REG_LEDCFG1 0x004D
#define REG_LEDCFG2 0x004E
#define REG_LEDCFG3 0x004F
#define REG_FSIMR 0x0050
#define REG_FSISR 0x0054
#define REG_MCUFWDL 0x0080
#define REG_HMEBOX_EXT_0 0x0088
#define REG_HMEBOX_EXT_1 0x008A
#define REG_HMEBOX_EXT_2 0x008C
#define REG_HMEBOX_EXT_3 0x008E
#define REG_BIST_SCAN 0x00D0
#define REG_BIST_RPT 0x00D4
#define REG_BIST_ROM_RPT 0x00D8
#define REG_USB_SIE_INTF 0x00E0
#define REG_PCIE_MIO_INTF 0x00E4
#define REG_PCIE_MIO_INTD 0x00E8
#define REG_HPON_FSM 0x00EC
#define REG_SYS_CFG 0x00F0
#define REG_MAC_PHY_CTRL_NORMAL 0x00f8
#define REG_MAC0 0x0081
#define REG_MAC1 0x0053
#define FW_MAC0_ready 0x18
#define FW_MAC1_ready 0x1A
#define MAC0_ON BIT7
#define MAC1_ON BIT0
#define mac0_ready BIT0
#define mac1_ready BIT0
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
#define REG_CR 0x0100
#define REG_PBP 0x0104
#define REG_TRXDMA_CTRL 0x010C
#define REG_TRXFF_BNDY 0x0114
#define REG_TRXFF_STATUS 0x0118
#define REG_RXFF_PTR 0x011C
#define REG_HIMR 0x0120
#define REG_HISR 0x0124
#define REG_HIMRE 0x0128
#define REG_HISRE 0x012C
#define REG_CPWM 0x012F
#define REG_FWIMR 0x0130
#define REG_FWISR 0x0134
#define REG_FTIMR 0x0138
#define REG_PKTBUF_DBG_CTRL 0x0140
#define REG_PKTBUF_DBG_DATA_L 0x0144
#define REG_PKTBUF_DBG_DATA_H 0x0148
#define REG_TC0_CTRL 0x0150
#define REG_TC1_CTRL 0x0154
#define REG_TC2_CTRL 0x0158
#define REG_TC3_CTRL 0x015C
#define REG_TC4_CTRL 0x0160
#define REG_TCUNIT_BASE 0x0164
#define REG_MBIST_START 0x0174
#define REG_MBIST_DONE 0x0178
#define REG_MBIST_FAIL 0x017C
#define REG_C2HEVT_MSG_NORMAL 0x01A0
#define REG_C2HEVT_CLEAR 0x01AF
#define REG_C2HEVT_MSG_TEST 0x01B8
#define REG_MCUTST_1 0x01c0
#define REG_FMETHR 0x01C8
#define REG_HMETFR 0x01CC
#define REG_HMEBOX_0 0x01D0
#define REG_HMEBOX_1 0x01D4
#define REG_HMEBOX_2 0x01D8
#define REG_HMEBOX_3 0x01DC
#define REG_LLT_INIT 0x01E0
#define REG_BB_ACCEESS_CTRL 0x01E8
#define REG_BB_ACCESS_DATA 0x01EC
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
#define REG_RQPN 0x0200
#define REG_FIFOPAGE 0x0204
#define REG_TDECTRL 0x0208
#define REG_TXDMA_OFFSET_CHK 0x020C
#define REG_TXDMA_STATUS 0x0210
#define REG_RQPN_NPQ 0x0214
//-----------------------------------------------------
//
// 0x0280h ~ 0x02FFh RXDMA Configuration
//
//-----------------------------------------------------
#define REG_RXDMA_AGG_PG_TH 0x0280
#define REG_RXPKT_NUM 0x0284
#define REG_RXDMA_STATUS 0x0288
//-----------------------------------------------------
//
// 0x0300h ~ 0x03FFh PCIe
//
//-----------------------------------------------------
#define REG_PCIE_CTRL_REG 0x0300
#define REG_INT_MIG 0x0304 // Interrupt Migration
#define REG_BCNQ_DESA 0x0308 // TX Beacon Descriptor Address
#define REG_HQ_DESA 0x0310 // TX High Queue Descriptor Address
#define REG_MGQ_DESA 0x0318 // TX Manage Queue Descriptor Address
#define REG_VOQ_DESA 0x0320 // TX VO Queue Descriptor Address
#define REG_VIQ_DESA 0x0328 // TX VI Queue Descriptor Address
#define REG_BEQ_DESA 0x0330 // TX BE Queue Descriptor Address
#define REG_BKQ_DESA 0x0338 // TX BK Queue Descriptor Address
#define REG_RX_DESA 0x0340 // RX Queue Descriptor Address
#define REG_DBI 0x0348 // Backdoor REG for Access Configuration
//sherry added for DBI Read/Write 20091126
#define REG_DBI_WDATA 0x0348 // Backdoor REG for Access Configuration
#define REG_DBI_RDATA 0x034C //Backdoor REG for Access Configuration
#define REG_DBI_CTRL 0x0350 //Backdoor REG for Access Configuration
#define REG_DBI_FLAG 0x0352 //Backdoor REG for Access Configuration#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY
#define REG_MDIO 0x0354 // MDIO for Access PCIE PHY
#define REG_DBG_SEL 0x0360 // Debug Selection Register
#define REG_PCIE_HRPWM 0x0361 //PCIe RPWM
#define REG_PCIE_HCPWM 0x0363 //PCIe CPWM
#define REG_UART_CTRL 0x0364 // UART Control
#define REG_UART_TX_DESA 0x0370 // UART TX Descriptor Address
#define REG_UART_RX_DESA 0x0378 // UART Rx Descriptor Address
// spec version 11
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
#define REG_VOQ_INFORMATION 0x0400
#define REG_VIQ_INFORMATION 0x0404
#define REG_BEQ_INFORMATION 0x0408
#define REG_BKQ_INFORMATION 0x040C
#define REG_MGQ_INFORMATION 0x0410
#define REG_HGQ_INFORMATION 0x0414
#define REG_BCNQ_INFORMATION 0x0418
#define REG_CPU_MGQ_INFORMATION 0x041C
#define REG_FWHW_TXQ_CTRL 0x0420
#define REG_HWSEQ_CTRL 0x0423
#define REG_TXPKTBUF_BCNQ_BDNY 0x0424
#define REG_TXPKTBUF_MGQ_BDNY 0x0425
#define REG_LIFETIME_EN 0x0426
#define REG_MULTI_BCNQ_OFFSET 0x0427
#define REG_SPEC_SIFS 0x0428
#define REG_RL 0x042A
#define REG_DARFRC 0x0430
#define REG_RARFRC 0x0438
#define REG_RRSR 0x0440
#define REG_ARFR0 0x0444
#define REG_ARFR1 0x0448
#define REG_ARFR2 0x044C
#define REG_ARFR3 0x0450
#define REG_AGGLEN_LMT 0x0458
#define REG_AMPDU_MIN_SPACE 0x045C
#define REG_TXPKTBUF_WMAC_LBK_BF_HD 0x045D
#define REG_FAST_EDCA_CTRL 0x0460
#define REG_RD_RESP_PKT_TH 0x0463
#define REG_INIRTS_RATE_SEL 0x0480
#define REG_INIDATA_RATE_SEL 0x0484
#define REG_FW_TSF_SYNC_CNT 0x04A0
#define REG_FW_BCN_DIS_CNT 0x04A1
#define REG_POWER_STATUS 0x04A4
#define REG_POWER_STAGE1 0x04B4
#define REG_POWER_STAGE2 0x04B8
#define REG_PKT_VO_VI_LIFE_TIME 0x04C0
#define REG_PKT_BE_BK_LIFE_TIME 0x04C2
#define REG_STBC_SETTING 0x04C4
#define REG_PROT_MODE_CTRL 0x04C8
#define REG_MAX_AGGR_NUM 0x04CA
#define REG_RTS_MAX_AGGR_NUM 0x04CB
#define REG_BAR_MODE_CTRL 0x04CC
#define REG_RA_TRY_RATE_AGG_LMT 0x04CF
#define REG_EARLY_MODE_CONTROL 0x04D0
#define REG_NQOS_SEQ 0x04DC
#define REG_QOS_SEQ 0x04DE
#define REG_NEED_CPU_HANDLE 0x04E0
#define REG_PKT_LOSE_RPT 0x04E1
#define REG_PTCL_ERR_STATUS 0x04E2
#define REG_DUMMY 0x04FC
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
#define REG_EDCA_VO_PARAM 0x0500
#define REG_EDCA_VI_PARAM 0x0504
#define REG_EDCA_BE_PARAM 0x0508
#define REG_EDCA_BK_PARAM 0x050C
#define REG_BCNTCFG 0x0510
#define REG_PIFS 0x0512
#define REG_RDG_PIFS 0x0513
#define REG_SIFS_CTX 0x0514
#define REG_SIFS_TRX 0x0516
#define REG_TSFTR_SYN_OFFSET 0x0518
#define REG_AGGR_BREAK_TIME 0x051A
#define REG_SLOT 0x051B
#define REG_TX_PTCL_CTRL 0x0520
#define REG_TXPAUSE 0x0522
#define REG_DIS_TXREQ_CLR 0x0523
#define REG_RD_CTRL 0x0524
#define REG_TBTT_PROHIBIT 0x0540
#define REG_RD_NAV_NXT 0x0544
#define REG_NAV_PROT_LEN 0x0546
#define REG_BCN_CTRL 0x0550
#define REG_BCN_CTRL_1 0x0551
#define REG_MBID_NUM 0x0552
#define REG_DUAL_TSF_RST 0x0553
#define REG_BCN_INTERVAL 0x0554 // The same as REG_MBSSID_BCN_SPACE
#define REG_MBSSID_BCN_SPACE 0x0554
#define REG_DRVERLYINT 0x0558
#define REG_BCNDMATIM 0x0559
#define REG_ATIMWND 0x055A
#define REG_USTIME_TSF 0x055C
#define REG_BCN_MAX_ERR 0x055D
#define REG_RXTSF_OFFSET_CCK 0x055E
#define REG_RXTSF_OFFSET_OFDM 0x055F
#define REG_TSFTR 0x0560
#define REG_TSFTR1 0x0568
#define REG_INIT_TSFTR 0x0564
#define REG_ATIMWND_1 0x0570
#define REG_PSTIMER 0x0580
#define REG_TIMER0 0x0584
#define REG_TIMER1 0x0588
#define REG_ACMHWCTRL 0x05C0
#define REG_ACMRSTCTRL 0x05C1
#define REG_ACMAVG 0x05C2
#define REG_VO_ADMTIME 0x05C4
#define REG_VI_ADMTIME 0x05C6
#define REG_BE_ADMTIME 0x05C8
#define REG_EDCA_RANDOM_GEN 0x05CC
#define REG_SCH_TXCMD 0x05D0
#define REG_DMC 0x05F0 //Dual MAC Co-Existence Register
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
#define REG_APSD_CTRL 0x0600
#define REG_BWOPMODE 0x0603
#define REG_TCR 0x0604
#define REG_RCR 0x0608
#define REG_RX_PKT_LIMIT 0x060C
#define REG_RX_DLK_TIME 0x060D
#define REG_RX_DRVINFO_SZ 0x060F
#define REG_MACID 0x0610
#define REG_BSSID 0x0618
#define REG_MAR 0x0620
#define REG_MBIDCAMCFG 0x0628
#define REG_USTIME_EDCA 0x0638
#define REG_MAC_SPEC_SIFS 0x063A
#define REG_RESP_SIFS_CCK 0x063C
#define REG_RESP_SIFS_OFDM 0x063E
#define REG_ACKTO 0x0640
#define REG_CTS2TO 0x0641
#define REG_EIFS 0x0642
//WMA, BA, CCX
#define REG_NAV_CTRL 0x0650
#define REG_BACAMCMD 0x0654
#define REG_BACAMCONTENT 0x0658
#define REG_LBDLY 0x0660
#define REG_FWDLY 0x0661
#define REG_RXERR_RPT 0x0664
#define REG_WMAC_TRXPTCL_CTL 0x0668
// Security
#define REG_CAMCMD 0x0670
#define REG_CAMWRITE 0x0674
#define REG_CAMREAD 0x0678
#define REG_CAMDBG 0x067C
#define REG_SECCFG 0x0680
// Power
#define REG_WOW_CTRL 0x0690
#define REG_PSSTATUS 0x0691
#define REG_PS_RX_INFO 0x0692
#define REG_LPNAV_CTRL 0x0694
#define REG_WKFMCAM_CMD 0x0698
#define REG_WKFMCAM_RWD 0x069C
#define REG_RXFLTMAP0 0x06A0
#define REG_RXFLTMAP1 0x06A2
#define REG_RXFLTMAP2 0x06A4
#define REG_BCN_PSR_RPT 0x06A8
#define REG_CALB32K_CTRL 0x06AC
#define REG_PKT_MON_CTRL 0x06B4
#define REG_BT_COEX_TABLE 0x06C0
#define REG_WMAC_RESP_TXINFO 0x06D8
#define REG_MACID1 0x0700
#define REG_BSSID1 0x0708
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h USB Configuration
//
//-----------------------------------------------------
#define REG_USB_INFO 0xFE17
#define REG_USB_SPECIAL_OPTION 0xFE55
#define REG_USB_DMA_AGG_TO 0xFE5B
#define REG_USB_AGG_TO 0xFE5C
#define REG_USB_AGG_TH 0xFE5D
// for 92DU high_Queue low_Queue Normal_Queue select
#define REG_USB_High_NORMAL_Queue_Select_MAC0 0xFE44
//#define REG_USB_LOW_Queue_Select_MAC0 0xFE45
#define REG_USB_High_NORMAL_Queue_Select_MAC1 0xFE47
//#define REG_USB_LOW_Queue_Select_MAC1 0xFE48
// For test chip
#define REG_TEST_USB_TXQS 0xFE48
#define REG_TEST_SIE_VID 0xFE60 // 0xFE60~0xFE61
#define REG_TEST_SIE_PID 0xFE62 // 0xFE62~0xFE63
#define REG_TEST_SIE_OPTIONAL 0xFE64
#define REG_TEST_SIE_CHIRP_K 0xFE65
#define REG_TEST_SIE_PHY 0xFE66 // 0xFE66~0xFE6B
#define REG_TEST_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75
#define REG_TEST_SIE_STRING 0xFE80 // 0xFE80~0xFEB9
// For normal chip
#define REG_NORMAL_SIE_VID 0xFE60 // 0xFE60~0xFE61
#define REG_NORMAL_SIE_PID 0xFE62 // 0xFE62~0xFE63
#define REG_NORMAL_SIE_OPTIONAL 0xFE64
#define REG_NORMAL_SIE_EP 0xFE65 // 0xFE65~0xFE67
#define REG_NORMAL_SIE_PHY 0xFE68 // 0xFE68~0xFE6B
#define REG_NORMAL_SIE_MAC_ADDR 0xFE70 // 0xFE70~0xFE75
#define REG_NORMAL_SIE_STRING 0xFE80 // 0xFE80~0xFEDF
//-----------------------------------------------------
//
// Redifine 8192C register definition for compatibility
//
//-----------------------------------------------------
// TODO: use these definition when using REG_xxx naming rule.
// NOTE: DO NOT Remove these definition. Use later.
#define SYS_ISO_CTRL REG_SYS_ISO_CTRL // System Isolation Interface Control.
#define SYS_FUNC_EN REG_SYS_FUNC_EN // System Function Enable.
#define SYS_CLK REG_SYS_CLKR
#define CR9346 REG_9346CR // 93C46/93C56 Command Register.
#define EFUSE_CTRL REG_EFUSE_CTRL // E-Fuse Control.
#define EFUSE_TEST REG_EFUSE_TEST // E-Fuse Test.
#define MSR (REG_CR + 2) // Media Status register
#define ISR REG_HISR
#define TSFR REG_TSFTR // Timing Sync Function Timer Register.
#define MACIDR0 REG_MACID // MAC ID Register, Offset 0x0050-0x0053
#define MACIDR4 (REG_MACID + 4) // MAC ID Register, Offset 0x0054-0x0055
#define PBP REG_PBP
// Redifine MACID register, to compatible prior ICs.
#define IDR0 MACIDR0
#define IDR4 MACIDR4
//
// 9. Security Control Registers (Offset: )
//
#define RWCAM REG_CAMCMD //IN 8190 Data Sheet is called CAMcmd
#define WCAMI REG_CAMWRITE // Software write CAM input content
#define RCAMO REG_CAMREAD // Software read/write CAM config
#define CAMDBG REG_CAMDBG
#define SECR REG_SECCFG //Security Configuration Register
// Unused register
#define UnusedRegister 0x1BF
#define DCAM UnusedRegister
#define PSR UnusedRegister
#define BBAddr UnusedRegister
#define PhyDataR UnusedRegister
#define InvalidBBRFValue 0x12345678
// Min Spacing related settings.
#define MAX_MSS_DENSITY_2T 0x13
#define MAX_MSS_DENSITY_1T 0x0A
//----------------------------------------------------------------------------
// 8192C Cmd9346CR bits (Offset 0xA, 16bit)
//----------------------------------------------------------------------------
#define CmdEEPROM_En BIT5 // EEPROM enable when set 1
#define CmdEERPOMSEL BIT4 // System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346
#define Cmd9346CR_9356SEL BIT4
#define AutoLoadEEPROM (CmdEEPROM_En|CmdEERPOMSEL)
#define AutoLoadEFUSE CmdEEPROM_En
// 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte)
//----------------------------------------------------------------------------
#define GPIOSEL_GPIO 0
#define GPIOSEL_ENBT BIT5
//----------------------------------------------------------------------------
// 8192C GPIO PIN Control Register (offset 0x44, 4 byte)
//----------------------------------------------------------------------------
#define GPIO_IN REG_GPIO_PIN_CTRL // GPIO pins input value
#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) // GPIO pins output value
#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) // GPIO pins output enable when a bit is set to "1"; otherwise, input is configured.
#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
//----------------------------------------------------------------------------
// 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits)
//----------------------------------------------------------------------------
/*
Network Type
00: No link
01: Link in ad hoc network
10: Link in infrastructure network
11: AP mode
Default: 00b.
*/
#define MSR_NOLINK 0x00
#define MSR_ADHOC 0x01
#define MSR_INFRA 0x02
#define MSR_AP 0x03
//
// 6. Adaptive Control Registers (Offset: 0x0160 - 0x01CF)
//
//----------------------------------------------------------------------------
// 8192C Response Rate Set Register (offset 0x181, 24bits)
//----------------------------------------------------------------------------
#define RRSR_RSC_OFFSET 21
#define RRSR_SHORT_OFFSET 23
#define RRSR_RSC_BW_40M 0x600000
#define RRSR_RSC_UPSUBCHNL 0x400000
#define RRSR_RSC_LOWSUBCHNL 0x200000
#define RRSR_SHORT 0x800000
#define RRSR_1M BIT0
#define RRSR_2M BIT1
#define RRSR_5_5M BIT2
#define RRSR_11M BIT3
#define RRSR_6M BIT4
#define RRSR_9M BIT5
#define RRSR_12M BIT6
#define RRSR_18M BIT7
#define RRSR_24M BIT8
#define RRSR_36M BIT9
#define RRSR_48M BIT10
#define RRSR_54M BIT11
#define RRSR_MCS0 BIT12
#define RRSR_MCS1 BIT13
#define RRSR_MCS2 BIT14
#define RRSR_MCS3 BIT15
#define RRSR_MCS4 BIT16
#define RRSR_MCS5 BIT17
#define RRSR_MCS6 BIT18
#define RRSR_MCS7 BIT19
#define BRSR_AckShortPmb BIT23
// CCK ACK: use Short Preamble or not
//----------------------------------------------------------------------------
// 8192C BW_OPMODE bits (Offset 0x203, 8bit)
//----------------------------------------------------------------------------
#define BW_OPMODE_20MHZ BIT2
#define BW_OPMODE_5G BIT1
#define BW_OPMODE_11J BIT0
//----------------------------------------------------------------------------
// 8192C CAM Config Setting (offset 0x250, 1 byte)
//----------------------------------------------------------------------------
#define CAM_VALID BIT15
#define CAM_NOTVALID 0x0000
#define CAM_USEDK BIT5
#define CAM_CONTENT_COUNT 8
#define CAM_NONE 0x0
#define CAM_WEP40 0x01
#define CAM_TKIP 0x02
#define CAM_AES 0x04
#define CAM_WEP104 0x05
#define CAM_SMS4 0x6
#define TOTAL_CAM_ENTRY 32
#define HALF_CAM_ENTRY 16
#define CAM_CONFIG_USEDK _TRUE
#define CAM_CONFIG_NO_USEDK _FALSE
#define CAM_WRITE BIT16
#define CAM_READ 0x00000000
#define CAM_POLLINIG BIT31
#define SCR_UseDK 0x01
#define SCR_TxSecEnable 0x02
#define SCR_RxSecEnable 0x04
//
// 12. Host Interrupt Status Registers (Offset: 0x0300 - 0x030F)
//
//----------------------------------------------------------------------------
// 8190 IMR/ISR bits (offset 0xfd, 8bits)
//----------------------------------------------------------------------------
#define IMR8190_DISABLED 0x0
// IMR DW0 Bit 0-31
#define IMR_BCNDMAINT6 BIT31 // Beacon DMA Interrupt 6
#define IMR_BCNDMAINT5 BIT30 // Beacon DMA Interrupt 5
#define IMR_BCNDMAINT4 BIT29 // Beacon DMA Interrupt 4
#define IMR_BCNDMAINT3 BIT28 // Beacon DMA Interrupt 3
#define IMR_BCNDMAINT2 BIT27 // Beacon DMA Interrupt 2
#define IMR_BCNDMAINT1 BIT26 // Beacon DMA Interrupt 1
#define IMR_BCNDOK8 BIT25 // Beacon Queue DMA OK Interrup 8
#define IMR_BCNDOK7 BIT24 // Beacon Queue DMA OK Interrup 7
#define IMR_BCNDOK6 BIT23 // Beacon Queue DMA OK Interrup 6
#define IMR_BCNDOK5 BIT22 // Beacon Queue DMA OK Interrup 5
#define IMR_BCNDOK4 BIT21 // Beacon Queue DMA OK Interrup 4
#define IMR_BCNDOK3 BIT20 // Beacon Queue DMA OK Interrup 3
#define IMR_BCNDOK2 BIT19 // Beacon Queue DMA OK Interrup 2
#define IMR_BCNDOK1 BIT18 // Beacon Queue DMA OK Interrup 1
#define IMR_TIMEOUT2 BIT17 // Timeout interrupt 2
#define IMR_TIMEOUT1 BIT16 // Timeout interrupt 1
#define IMR_TXFOVW BIT15 // Transmit FIFO Overflow
#define IMR_PSTIMEOUT BIT14 // Power save time out interrupt
#define IMR_BcnInt BIT13 // Beacon DMA Interrupt 0
#define IMR_RXFOVW BIT12 // Receive FIFO Overflow
#define IMR_RDU BIT11 // Receive Descriptor Unavailable
#define IMR_ATIMEND BIT10 // For 92C,ATIM Window End Interrupt
#define IMR_BDOK BIT9 // Beacon Queue DMA OK Interrup
#define IMR_HIGHDOK BIT8 // High Queue DMA OK Interrupt
#define IMR_TBDOK BIT7 // Transmit Beacon OK interrup
#define IMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
#define IMR_TBDER BIT5 // For 92C,Transmit Beacon Error Interrupt
#define IMR_BKDOK BIT4 // AC_BK DMA OK Interrupt
#define IMR_BEDOK BIT3 // AC_BE DMA OK Interrupt
#define IMR_VIDOK BIT2 // AC_VI DMA OK Interrupt
#define IMR_VODOK BIT1 // AC_VO DMA Interrupt
#define IMR_ROK BIT0 // Receive DMA OK Interrupt
// 13. Host Interrupt Status Extension Register (Offset: 0x012C-012Eh)
#define IMR_TXERR BIT11
#define IMR_RXERR BIT10
#define IMR_C2HCMD BIT9
#define IMR_CPWM BIT8
//RSVD [2-7]
#define IMR_OCPINT BIT1
#define IMR_WLANOFF BIT0
//----------------------------------------------------------------------------
// 8192D EFUSE
//----------------------------------------------------------------------------
#define HWSET_MAX_SIZE 256
//----------------------------------------------------------------------------
// 8192C EEPROM/EFUSE share register definition.
//----------------------------------------------------------------------------
//
// Default Value for EEPROM or EFUSE!!!
//
#define EEPROM_Default_TSSI 0x0
#define EEPROM_Default_TxPowerDiff 0x0
#define EEPROM_Default_CrystalCap 0x0 //92D default 0x0
#define EEPROM_Default_BoardType 0x02 // Default: 2X2, RTL8192CE(QFPN68)
#define EEPROM_Default_TxPower 0x1010
#define EEPROM_Default_HT2T_TxPwr 0x10
#define EEPROM_Default_LegacyHTTxPowerDiff 0x4
#define EEPROM_Default_ThermalMeter 0x12
#define EEPROM_Default_AntTxPowerDiff 0x0
//#define EEPROM_Default_TxPwDiff_CrystalCap 0x5
#define EEPROM_Default_TxPowerLevel_2G 0x2C
#define EEPROM_Default_TxPowerLevel_5G 0x22
#define EEPROM_Default_HT40_2SDiff 0x0
#define EEPROM_Default_HT20_Diff 2 // HT20<->40 default Tx Power Index Difference
#define EEPROM_Default_LegacyHTTxPowerDiff 0x4 //OFDM Tx Power index diff
#define EEPROM_Default_HT40_PwrMaxOffset 0
#define EEPROM_Default_HT20_PwrMaxOffset 0
// For debug
#define EEPROM_Default_PID 0x1234
#define EEPROM_Default_VID 0x5678
#define EEPROM_Default_CustomerID 0xAB
#define EEPROM_Default_SubCustomerID 0xCD
#define EEPROM_Default_Version 0
#define EEPROM_Default_externalPA_C9 0x00
#define EEPROM_Default_externalPA_CC 0xFF
#define EEPROM_Default_internalPA_SP3T_C9 0xAA
#define EEPROM_Default_internalPA_SP3T_CC 0xAF
#define EEPROM_Default_internalPA_SPDT_C9 0xAA
#ifdef CONFIG_PCI_HCI
#define EEPROM_Default_internalPA_SPDT_CC 0xA0
#else
#define EEPROM_Default_internalPA_SPDT_CC 0xFA
#endif
#define EEPROM_CHANNEL_PLAN_FCC 0x0
#define EEPROM_CHANNEL_PLAN_IC 0x1
#define EEPROM_CHANNEL_PLAN_ETSI 0x2
#define EEPROM_CHANNEL_PLAN_SPAIN 0x3
#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
#define EEPROM_CHANNEL_PLAN_MKK 0x5
#define EEPROM_CHANNEL_PLAN_MKK1 0x6
#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
#define EEPROM_CHANNEL_PLAN_TELEC 0x8
#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
#define EEPROM_CHANNEL_PLAN_NCC 0xB
#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
#define EEPROM_CID_DEFAULT 0x0
#define EEPROM_CID_TOSHIBA 0x4
#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25.
#define EEPROM_CID_QMI 0x0D
#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108
#define RTL8192_EEPROM_ID 0x8129
#define EEPROM_WAPI_SUPPORT 0x78
#ifdef CONFIG_PCI_HCI
#define RT_IBSS_INT_MASKS (IMR_BcnInt | IMR_TBDOK | IMR_TBDER)
#define RT_AC_INT_MASKS (IMR_VIDOK | IMR_VODOK | IMR_BEDOK|IMR_BKDOK)
#define RT_BSS_INT_MASKS (RT_IBSS_INT_MASKS)
#define RTL8190_EEPROM_ID 0x8129 // 0-1
#define EEPROM_HPON 0x02 // LDO settings.2-5
#define EEPROM_CLK 0x06 // Clock settings.6-7
#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8
#define EEPROM_VID 0x28 // SE Vendor ID.A-B
#define EEPROM_DID 0x2A // SE Device ID. C-D
#define EEPROM_SVID 0x2C // SE Vendor ID.E-F
#define EEPROM_SMID 0x2E // SE PCI Subsystem ID. 10-11
#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17
#define EEPROM_MAC_ADDR_MAC0_92D 0x55
#define EEPROM_MAC_ADDR_MAC1_92D 0x5B
//----------------------------------------------------------------
// 2.4G band Tx power index setting
#define EEPROM_CCK_TX_PWR_INX_2G 0x61
#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D
#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70
#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73
#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76
#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79
//5GL channel 32-64
#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88
#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B
#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E
//5GM channel 100-140
#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D
#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0
#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3
//5GH channel 149-165
#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2
#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5
#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8
#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels.
#define EEPROM_IQK_DELTA 0xBC
#define EEPROM_LCK_DELTA 0xBC
#define EEPROM_XTAL_K 0xBD //[7:5]
#define EEPROM_TSSI_A_5G 0xBE
#define EEPROM_TSSI_B_5G 0xBF
#define EEPROM_TSSI_AB_5G 0xC0
#define EEPROM_THERMAL_METER 0xC3 //[4:0]
#define EEPROM_PATHDIV 0xC4
#define EEPROM_RF_OPT1 0xC4
#define EEPROM_RF_OPT2 0xC5
#define EEPROM_RF_OPT3 0xC6
#define EEPROM_RF_OPT4 0xC7
#define EEPROM_RF_OPT5 0xC8
#define EEPROM_RF_OPT6 0xC9
#define EEPROM_VERSION 0xCA
#define EEPROM_CUSTOMER_ID 0xCB
#define EEPROM_RF_OPT7 0xCC
#define EEPROM_WIDIPAIRING_ADDR 0xF0
#define EEPROM_WIDIPAIRING_KEY 0xF6
#define EEPROM_DEF_PART_NO 0x3FD //Byte
#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE
#endif
#ifdef CONFIG_USB_HCI
#define RTL8190_EEPROM_ID 0x8129 // 0-1
#define EEPROM_HPON 0x02 // LDO settings.2-5
#define EEPROM_CLK 0x06 // Clock settings.6-7
#define EEPROM_MAC_FUNCTION 0x08 // SE Test mode.8
#define EEPROM_VID 0xC // SE Vendor ID.A-B
#define EEPROM_PID 0xE // SE Device ID. C-D
#define EEPROM_ENDPOINT_SETTING 0x10
#define EEPROM_CHIRP_K 0x12 // Changed
#define EEPROM_USB_PHY 0x13 // Changed
#define EEPROM_NORMAL_BoardType EEPROM_RF_OPT1 //[7:5]
#define EEPROM_MAC_ADDR 0x16 // SEMAC Address. 12-17
#define EEPROM_STRING 0x1F
#define EEPROM_SUBCUSTOMER_ID 0x59
#define EEPROM_MAC_ADDR_MAC0_92D 0x19
#define EEPROM_MAC_ADDR_MAC1_92D 0x5B
//----------------------------------------------------------------
// 2.4G band Tx power index setting
#define EEPROM_CCK_TX_PWR_INX_2G 0x61
#define EEPROM_HT40_1S_TX_PWR_INX_2G 0x67
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_2G 0x6D
#define EEPROM_HT20_TX_PWR_INX_DIFF_2G 0x70
#define EEPROM_OFDM_TX_PWR_INX_DIFF_2G 0x73
#define EEPROM_HT40_MAX_PWR_OFFSET_2G 0x76
#define EEPROM_HT20_MAX_PWR_OFFSET_2G 0x79
//5GL channel 32-64
#define EEPROM_HT40_1S_TX_PWR_INX_5GL 0x7C
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GL 0x82
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GL 0x85
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GL 0x88
#define EEPROM_HT40_MAX_PWR_OFFSET_5GL 0x8B
#define EEPROM_HT20_MAX_PWR_OFFSET_5GL 0x8E
//5GM channel 100-140
#define EEPROM_HT40_1S_TX_PWR_INX_5GM 0x91
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GM 0x97
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GM 0x9A
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GM 0x9D
#define EEPROM_HT40_MAX_PWR_OFFSET_5GM 0xA0
#define EEPROM_HT20_MAX_PWR_OFFSET_5GM 0xA3
//5GH channel 149-165
#define EEPROM_HT40_1S_TX_PWR_INX_5GH 0xA6
#define EEPROM_HT40_2S_TX_PWR_INX_DIFF_5GH 0xAC
#define EEPROM_HT20_TX_PWR_INX_DIFF_5GH 0xAF
#define EEPROM_OFDM_TX_PWR_INX_DIFF_5GH 0xB2
#define EEPROM_HT40_MAX_PWR_OFFSET_5GH 0xB5
#define EEPROM_HT20_MAX_PWR_OFFSET_5GH 0xB8
#define EEPROM_CHANNEL_PLAN 0xBB // Map of supported channels.
#define EEPROM_TEST_CHANNEL_PLAN 0xBB
#define EEPROM_IQK_DELTA 0xBC
#define EEPROM_LCK_DELTA 0xBC
#define EEPROM_XTAL_K 0xBD //[7:5]
#define EEPROM_TSSI_A_5G 0xBE
#define EEPROM_TSSI_B_5G 0xBF
#define EEPROM_TSSI_AB_5G 0xC0
#define EEPROM_THERMAL_METER 0xC3 //[4:0]
#define EEPROM_RF_OPT1 0xC4
#define EEPROM_RF_OPT2 0xC5
#define EEPROM_RF_OPT3 0xC6
#define EEPROM_RF_OPT4 0xC7
#define EEPROM_RF_OPT5 0xC8
#define EEPROM_RF_OPT6 0xC9
#define EEPROM_VERSION 0xCA
#define EEPROM_CUSTOMER_ID 0xCB
#define EEPROM_RF_OPT7 0xCC
#define EEPROM_DEF_PART_NO 0x3FD //Byte
#define EEPROME_CHIP_VERSION_L 0x3FF
#define EEPROME_CHIP_VERSION_H 0x3FE
//-------------------------------------------------------------
// EEPROM content definitions
//-------------------------------------------------------------
#define OS_LINK_SPEED_NORMAL_MASK BIT3 | BIT2
#define OS_LINK_SPEED_TEST_MASK BIT3 | BIT4
#define BOARD_TYPE_NORMAL_MASK 0xE0
#define BOARD_TYPE_TEST_MASK 0xF
#define BT_COEXISTENCE_TEST BIT4
#define BT_COEXISTENCE_NORMAL BIT5
#define BT_CO_SHIFT_TEST 4
#define BT_CO_SHIFT_NORMAL 5
#define EP_NUMBER_MASK_TEST 0x30 //bit 4:5 0Eh
#define EP_NUMBER_SHIFT_TEST 4
#define USB_PHY_PARA_SIZE_TEST 6
#define USB_PHY_PARA_SIZE_NORMAL 4
//-------------------------------------------------------------
// EEPROM default value definitions
//-------------------------------------------------------------
// Use 0xABCD instead of 0x8192 for debug
#define EEPROM_DEF_ID_0 0xCD // Byte 0x00
#define EEPROM_DEF_ID_1 0xAB // Byte 0x01
#define EEPROM_DEF_RTK_RSV_A3 0x74 // Byte 0x03
#define EEPROM_DEF_RTK_RSV_A4 0x6D // Byte 0x04
#define EEPROM_DEF_RTK_RSV_A8 0xFF // Byte 0x08
#define EEPROM_DEF_VID_0 0x0A // Byte 0x0A
#define EEPROM_DEF_VID_1 0x0B
#define EEPROM_DEF_PID_0 0x92 // Byte 0x0C
#define EEPROM_DEF_PID_1 0x81
#define EEPROM_TEST_DEF_USB_OPT 0x80 // Byte 0x0E
#define EEPROM_NORMAL_DEF_USB_OPT 0x00 // Byte 0x0E
#define EEPROM_DEF_CHIRPK 0x15 // Byte 0x0F
#define EEPROM_DEF_USB_PHY_0 0x85 // Byte 0x10
#define EEPROM_DEF_USB_PHY_1 0x62 // Byte 0x11
#define EEPROM_DEF_USB_PHY_2 0x9E // Byte 0x12
#define EEPROM_DEF_USB_PHY_3 0x06 // Byte 0x13
#define EEPROM_DEF_TSSI_A 0x09 // Byte 0x78
#define EEPROM_DEF_TSSI_B 0x09 // Byte 0x79
#define EEPROM_DEF_THERMAL_METER 0x12 // Byte 0x7A
#define EEPROM_USB_SN BIT(0)
#define EEPROM_USB_REMOTE_WAKEUP BIT(1)
#define EEPROM_USB_DEVICE_PWR BIT(2)
#define EEPROM_EP_NUMBER (BIT(3)|BIT(4))
#if 0
#define EEPROM_CHANNEL_PLAN_FCC 0x0
#define EEPROM_CHANNEL_PLAN_IC 0x1
#define EEPROM_CHANNEL_PLAN_ETSI 0x2
#define EEPROM_CHANNEL_PLAN_SPAIN 0x3
#define EEPROM_CHANNEL_PLAN_FRANCE 0x4
#define EEPROM_CHANNEL_PLAN_MKK 0x5
#define EEPROM_CHANNEL_PLAN_MKK1 0x6
#define EEPROM_CHANNEL_PLAN_ISRAEL 0x7
#define EEPROM_CHANNEL_PLAN_TELEC 0x8
#define EEPROM_CHANNEL_PLAN_GLOBAL_DOMAIN 0x9
#define EEPROM_CHANNEL_PLAN_WORLD_WIDE_13 0xA
#define EEPROM_CHANNEL_PLAN_BY_HW_MASK 0x80
#define EEPROM_CID_DEFAULT 0x0
#define EEPROM_CID_WHQL 0xFE // added by chiyoko for dtm, 20090108
#define EEPROM_CID_CCX 0x10 // CCX test. By Bruce, 2009-02-25.
#endif
#endif
/*===================================================================
=====================================================================
Here the register defines are for 92C. When the define is as same with 92C,
we will use the 92C's define for the consistency
So the following defines for 92C is not entire!!!!!!
=====================================================================
=====================================================================*/
/*
Based on Datasheet V33---090401
Register Summary
Current IOREG MAP
0x0000h ~ 0x00FFh System Configuration (256 Bytes)
0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
*/
//----------------------------------------------------------------------------
// 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits)
//----------------------------------------------------------------------------
#define RCR_APPFCS BIT31 //WMAC append FCS after pauload
#define RCR_APP_MIC BIT30 //
#define RCR_APP_ICV BIT29 //
#define RCR_APP_PHYST_RXFF BIT28 //
#define RCR_APP_BA_SSN BIT27 //Accept BA SSN
#define RCR_ENMBID BIT24 //Enable Multiple BssId.
#define RCR_LSIGEN BIT23
#define RCR_MFBEN BIT22
#define RCR_HTC_LOC_CTRL BIT14 //MFC<--HTC=1 MFC-->HTC=0
#define RCR_AMF BIT13 //Accept management type frame
#define RCR_ACF BIT12 //Accept control type frame
#define RCR_ADF BIT11 //Accept data type frame
#define RCR_AICV BIT9 //Accept ICV error packet
#define RCR_ACRC32 BIT8 //Accept CRC32 error packet
#define RCR_CBSSID_BCN BIT7 //Accept BSSID match packet (Rx beacon, probe rsp)
#define RCR_CBSSID_DATA BIT6 //Accept BSSID match packet (Data)
#define RCR_CBSSID RCR_CBSSID_DATA //Accept BSSID match packet
#define RCR_APWRMGT BIT5 //Accept power management packet
#define RCR_ADD3 BIT4 //Accept address 3 match packet
#define RCR_AB BIT3 //Accept broadcast packet
#define RCR_AM BIT2 //Accept multicast packet
#define RCR_APM BIT1 //Accept physical match packet
#define RCR_AAP BIT0 //Accept all unicast packet
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
//============================================================================
// 8192c USB specific Regsiter Offset and Content definition,
// 2009.08.18, added by vivi. for merge 92c and 92C into one driver
//============================================================================
//#define APS_FSMCO 0x0004 same with 92Ce
#define RSV_CTRL 0x001C
#define RD_CTRL 0x0524
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h USB Configuration
//
//-----------------------------------------------------
#define REG_USB_INFO 0xFE17
#define REG_USB_SPECIAL_OPTION 0xFE55
#define REG_USB_DMA_AGG_TO 0xFE5B
#define REG_USB_AGG_TO 0xFE5C
#define REG_USB_AGG_TH 0xFE5D
#define REG_USB_VID 0xFE60
#define REG_USB_PID 0xFE62
#define REG_USB_OPTIONAL 0xFE64
#define REG_USB_CHIRP_K 0xFE65
#define REG_USB_PHY 0xFE66
#define REG_USB_MAC_ADDR 0xFE70
#define REG_USB_HRPWM 0xFE58
#define REG_USB_HCPWM 0xFE57
#define InvalidBBRFValue 0x12345678
//============================================================================
// 8192C Regsiter Bit and Content definition
//============================================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
//2 SPS0_CTRL
#define SW18_FPWM BIT(3)
//2 SYS_ISO_CTRL
#define ISO_MD2PP BIT(0)
#define ISO_UA2USB BIT(1)
#define ISO_UD2CORE BIT(2)
#define ISO_PA2PCIE BIT(3)
#define ISO_PD2CORE BIT(4)
#define ISO_IP2MAC BIT(5)
#define ISO_DIOP BIT(6)
#define ISO_DIOE BIT(7)
#define ISO_EB2CORE BIT(8)
#define ISO_DIOR BIT(9)
#define PWC_EV25V BIT(14)
#define PWC_EV12V BIT(15)
//2 SYS_FUNC_EN
#define FEN_BBRSTB BIT(0)
#define FEN_BB_GLB_RSTn BIT(1)
#define FEN_USBA BIT(2)
#define FEN_UPLL BIT(3)
#define FEN_USBD BIT(4)
#define FEN_DIO_PCIE BIT(5)
#define FEN_PCIEA BIT(6)
#define FEN_PPLL BIT(7)
#define FEN_PCIED BIT(8)
#define FEN_DIOE BIT(9)
#define FEN_CPUEN BIT(10)
#define FEN_DCORE BIT(11)
#define FEN_ELDR BIT(12)
#define FEN_DIO_RF BIT(13)
#define FEN_HWPDN BIT(14)
#define FEN_MREGEN BIT(15)
//2 APS_FSMCO
#define PFM_LDALL BIT(0)
#define PFM_ALDN BIT(1)
#define PFM_LDKP BIT(2)
#define PFM_WOWL BIT(3)
#define EnPDN BIT(4)
#define PDN_PL BIT(5)
#define APFM_ONMAC BIT(8)
#define APFM_OFF BIT(9)
#define APFM_RSM BIT(10)
#define AFSM_HSUS BIT(11)
#define AFSM_PCIE BIT(12)
#define APDM_MAC BIT(13)
#define APDM_HOST BIT(14)
#define APDM_HPDN BIT(15)
#define RDY_MACON BIT(16)
#define SUS_HOST BIT(17)
#define ROP_ALD BIT(20)
#define ROP_PWR BIT(21)
#define ROP_SPS BIT(22)
#define SOP_MRST BIT(25)
#define SOP_FUSE BIT(26)
#define SOP_ABG BIT(27)
#define SOP_AMB BIT(28)
#define SOP_RCK BIT(29)
#define SOP_A8M BIT(30)
#define XOP_BTCK BIT(31)
//2 SYS_CLKR
#define ANAD16V_EN BIT(0)
#define ANA8M BIT(1)
#define MACSLP BIT(4)
#define LOADER_CLK_EN BIT(5)
#define _80M_SSC_DIS BIT(7)
#define _80M_SSC_EN_HO BIT(8)
#define PHY_SSC_RSTB BIT(9)
#define SEC_CLK_EN BIT(10)
#define MAC_CLK_EN BIT(11)
#define SYS_CLK_EN BIT(12)
#define RING_CLK_EN BIT(13)
//2 9346CR
#define BOOT_FROM_EEPROM BIT(4)
#define EEPROM_EN BIT(5)
//2 AFE_MISC
#define AFE_BGEN BIT(0)
#define AFE_MBEN BIT(1)
#define MAC_ID_EN BIT(7)
//2 SPS0_CTRL
//2 SPS_OCP_CFG
//2 RSV_CTRL
#define WLOCK_ALL BIT(0)
#define WLOCK_00 BIT(1)
#define WLOCK_04 BIT(2)
#define WLOCK_08 BIT(3)
#define WLOCK_40 BIT(4)
#define R_DIS_PRST_0 BIT(5)
#define R_DIS_PRST_1 BIT(6)
#define LOCK_ALL_EN BIT(7)
//2 RF_CTRL
#define RF_EN BIT(0)
#define RF_RSTB BIT(1)
#define RF_SDMRSTB BIT(2)
//2 LDOA15_CTRL
#define LDA15_EN BIT(0)
#define LDA15_STBY BIT(1)
#define LDA15_OBUF BIT(2)
#define LDA15_REG_VOS BIT(3)
#define _LDA15_VOADJ(x) (((x) & 0x7) << 4)
//2 LDOV12D_CTRL
#define LDV12_EN BIT(0)
#define LDV12_SDBY BIT(1)
#define LPLDO_HSM BIT(2)
#define LPLDO_LSM_DIS BIT(3)
#define _LDV12_VADJ(x) (((x) & 0xF) << 4)
//2 AFE_XTAL_CTRL
#define XTAL_EN BIT(0)
#define XTAL_BSEL BIT(1)
#define _XTAL_BOSC(x) (((x) & 0x3) << 2)
#define _XTAL_CADJ(x) (((x) & 0xF) << 4)
#define XTAL_GATE_USB BIT(8)
#define _XTAL_USB_DRV(x) (((x) & 0x3) << 9)
#define XTAL_GATE_AFE BIT(11)
#define _XTAL_AFE_DRV(x) (((x) & 0x3) << 12)
#define XTAL_RF_GATE BIT(14)
#define _XTAL_RF_DRV(x) (((x) & 0x3) << 15)
#define XTAL_GATE_DIG BIT(17)
#define _XTAL_DIG_DRV(x) (((x) & 0x3) << 18)
#define XTAL_BT_GATE BIT(20)
#define _XTAL_BT_DRV(x) (((x) & 0x3) << 21)
#define _XTAL_GPIO(x) (((x) & 0x7) << 23)
#define CKDLY_AFE BIT(26)
#define CKDLY_USB BIT(27)
#define CKDLY_DIG BIT(28)
#define CKDLY_BT BIT(29)
//2 AFE_PLL_CTRL
#define APLL_EN BIT(0)
#define APLL_320_EN BIT(1)
#define APLL_FREF_SEL BIT(2)
#define APLL_EDGE_SEL BIT(3)
#define APLL_WDOGB BIT(4)
#define APLL_LPFEN BIT(5)
#define APLL_REF_CLK_13MHZ 0x1
#define APLL_REF_CLK_19_2MHZ 0x2
#define APLL_REF_CLK_20MHZ 0x3
#define APLL_REF_CLK_25MHZ 0x4
#define APLL_REF_CLK_26MHZ 0x5
#define APLL_REF_CLK_38_4MHZ 0x6
#define APLL_REF_CLK_40MHZ 0x7
#define APLL_320EN BIT(14)
#define APLL_80EN BIT(15)
#define APLL_1MEN BIT(24)
//2 EFUSE_CTRL
#define ALD_EN BIT(18)
#define EF_PD BIT(19)
#define EF_FLAG BIT(31)
//2 EFUSE_TEST
#define EF_TRPT BIT(7)
#define LDOE25_EN BIT(31)
//2 PWR_DATA
//2 CAL_TIMER
//2 ACLK_MON
#define RSM_EN BIT(0)
#define Timer_EN BIT(4)
//2 GPIO_MUXCFG
#define TRSW0EN BIT(2)
#define TRSW1EN BIT(3)
#define EROM_EN BIT(4)
#define EnBT BIT(5)
#define EnUart BIT(8)
#define Uart_910 BIT(9)
#define EnPMAC BIT(10)
#define SIC_SWRST BIT(11)
#define EnSIC BIT(12)
#define SIC_23 BIT(13)
#define EnHDP BIT(14)
#define SIC_LBK BIT(15)
//2 GPIO_PIN_CTRL
//2 GPIO_INTM
//2 LEDCFG
#define LED0PL BIT(4)
#define LED1PL BIT(12)
#define LED0DIS BIT(7)
#define SECCAM_CLR BIT(30)
//2 FSIMR
//2 FSISR
//2 8051FWDL
//2 MCUFWDL
#define MCUFWDL_EN BIT(0)
#define MCUFWDL_RDY BIT(1)
#define FWDL_ChkSum_rpt BIT(2)
#define MACINI_RDY BIT(3)
#define BBINI_RDY BIT(4)
#define RFINI_RDY BIT(5)
#define WINTINI_RDY BIT(6)
#define MAC1_WINTINI_RDY BIT(11)// 0X81 BIT3
#define CPRST BIT(23)
//2 REG_SYS_CFG
#define XCLK_VLD BIT(0)
#define ACLK_VLD BIT(1)
#define UCLK_VLD BIT(2)
#define PCLK_VLD BIT(3)
#define PCIRSTB BIT(4)
#define V15_VLD BIT(5)
#define TRP_B15V_EN BIT(7)
#define SIC_IDLE BIT(8)
#define BD_MAC2 BIT(9)
#define BD_MAC1 BIT(10)
#define IC_MACPHY_MODE BIT(11)
#define PAD_HWPD_IDN BIT(22)
#define TRP_VAUX_EN BIT(23)
#define TRP_BT_EN BIT(24)
#define BD_PKG_SEL BIT(25)
#define BD_HCI_SEL BIT(26)
#define TYPE_ID BIT(27)
#define CHIP_VER_RTL_MASK 0xF000 //Bit 12 ~ 15
#define CHIP_VER_RTL_SHIFT 12
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
//2 Function Enable Registers
//2 CR
#define REG_LBMODE (REG_CR + 3)
#define HCI_TXDMA_EN BIT(0)
#define HCI_RXDMA_EN BIT(1)
#define TXDMA_EN BIT(2)
#define RXDMA_EN BIT(3)
#define PROTOCOL_EN BIT(4)
#define SCHEDULE_EN BIT(5)
#define MACTXEN BIT(6)
#define MACRXEN BIT(7)
#define ENSWBCN BIT(8)
#define ENSEC BIT(9)
// Network type
#define _NETTYPE(x) (((x) & 0x3) << 16)
#define MASK_NETTYPE 0x30000
#define NT_NO_LINK 0x0
#define NT_LINK_AD_HOC 0x1
#define NT_LINK_AP 0x2
#define NT_AS_AP 0x3
#define _LBMODE(x) (((x) & 0xF) << 24)
#define MASK_LBMODE 0xF000000
#define LOOPBACK_NORMAL 0x0
#define LOOPBACK_IMMEDIATELY 0xB
#define LOOPBACK_MAC_DELAY 0x3
#define LOOPBACK_PHY 0x1
#define LOOPBACK_DMA 0x7
//2 PBP - Page Size Register
#define GET_RX_PAGE_SIZE(value) ((value) & 0xF)
#define GET_TX_PAGE_SIZE(value) (((value) & 0xF0) >> 4)
#define _PSRX_MASK 0xF
#define _PSTX_MASK 0xF0
#define _PSRX(x) (x)
#define _PSTX(x) ((x) << 4)
#define PBP_64 0x0
#define PBP_128 0x1
#define PBP_256 0x2
#define PBP_512 0x3
#define PBP_1024 0x4
//2 TX/RXDMA
#define RXDMA_ARBBW_EN BIT(0)
#define RXSHFT_EN BIT(1)
#define RXDMA_AGG_EN BIT(2)
#define QS_VO_QUEUE BIT(8)
#define QS_VI_QUEUE BIT(9)
#define QS_BE_QUEUE BIT(10)
#define QS_BK_QUEUE BIT(11)
#define QS_MANAGER_QUEUE BIT(12)
#define QS_HIGH_QUEUE BIT(13)
#define HQSEL_VOQ BIT(0)
#define HQSEL_VIQ BIT(1)
#define HQSEL_BEQ BIT(2)
#define HQSEL_BKQ BIT(3)
#define HQSEL_MGTQ BIT(4)
#define HQSEL_HIQ BIT(5)
// For normal driver, 0x10C
#define _TXDMA_HIQ_MAP(x) (((x)&0x3) << 14)
#define _TXDMA_MGQ_MAP(x) (((x)&0x3) << 12)
#define _TXDMA_BKQ_MAP(x) (((x)&0x3) << 10)
#define _TXDMA_BEQ_MAP(x) (((x)&0x3) << 8 )
#define _TXDMA_VIQ_MAP(x) (((x)&0x3) << 6 )
#define _TXDMA_VOQ_MAP(x) (((x)&0x3) << 4 )
#define QUEUE_LOW 1
#define QUEUE_NORMAL 2
#define QUEUE_HIGH 3
//2 TRXFF_BNDY
//2 LLT_INIT
#define _LLT_NO_ACTIVE 0x0
#define _LLT_WRITE_ACCESS 0x1
#define _LLT_READ_ACCESS 0x2
#define _LLT_INIT_DATA(x) ((x) & 0xFF)
#define _LLT_INIT_ADDR(x) (((x) & 0xFF) << 8)
#define _LLT_OP(x) (((x) & 0x3) << 30)
#define _LLT_OP_VALUE(x) (((x) >> 30) & 0x3)
//2 BB_ACCESS_CTRL
#define BB_WRITE_READ_MASK (BIT(31) | BIT(30))
#define BB_WRITE_EN BIT(30)
#define BB_READ_EN BIT(31)
//#define BB_ADDR_MASK 0xFFF
//#define _BB_ADDR(x) ((x) & BB_ADDR_MASK)
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
//2 RQPN
#define _HPQ(x) ((x) & 0xFF)
#define _LPQ(x) (((x) & 0xFF) << 8)
#define _PUBQ(x) (((x) & 0xFF) << 16)
#define _NPQ(x) ((x) & 0xFF) // NOTE: in RQPN_NPQ register
#define HPQ_PUBLIC_DIS BIT(24)
#define LPQ_PUBLIC_DIS BIT(25)
#define LD_RQPN BIT(31)
//2 TDECTRL
#define BCN_VALID BIT(16)
#define BCN_HEAD(x) (((x) & 0xFF) << 8)
#define BCN_HEAD_MASK 0xFF00
//2 TDECTL
#define BLK_DESC_NUM_SHIFT 4
#define BLK_DESC_NUM_MASK 0xF
//2 TXDMA_OFFSET_CHK
#define DROP_DATA_EN BIT(9)
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
//2 FWHW_TXQ_CTRL
#define EN_AMPDU_RTY_NEW BIT(7)
//2 INIRTSMCS_SEL
#define _INIRTSMCS_SEL(x) ((x) & 0x3F)
//2 SPEC SIFS
#define _SPEC_SIFS_CCK(x) ((x) & 0xFF)
#define _SPEC_SIFS_OFDM(x) (((x) & 0xFF) << 8)
//2 RRSR
#define RATE_REG_BITMAP_ALL 0xFFFFF
#define _RRSC_BITMAP(x) ((x) & 0xFFFFF)
#define _RRSR_RSC(x) (((x) & 0x3) << 21)
#define RRSR_RSC_RESERVED 0x0
#define RRSR_RSC_UPPER_SUBCHANNEL 0x1
#define RRSR_RSC_LOWER_SUBCHANNEL 0x2
#define RRSR_RSC_DUPLICATE_MODE 0x3
//2 ARFR
#define USE_SHORT_G1 BIT(20)
//2 AGGLEN_LMT_L
#define _AGGLMT_MCS0(x) ((x) & 0xF)
#define _AGGLMT_MCS1(x) (((x) & 0xF) << 4)
#define _AGGLMT_MCS2(x) (((x) & 0xF) << 8)
#define _AGGLMT_MCS3(x) (((x) & 0xF) << 12)
#define _AGGLMT_MCS4(x) (((x) & 0xF) << 16)
#define _AGGLMT_MCS5(x) (((x) & 0xF) << 20)
#define _AGGLMT_MCS6(x) (((x) & 0xF) << 24)
#define _AGGLMT_MCS7(x) (((x) & 0xF) << 28)
//2 RL
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
//2 DARFRC
#define _DARF_RC1(x) ((x) & 0x1F)
#define _DARF_RC2(x) (((x) & 0x1F) << 8)
#define _DARF_RC3(x) (((x) & 0x1F) << 16)
#define _DARF_RC4(x) (((x) & 0x1F) << 24)
// NOTE: shift starting from address (DARFRC + 4)
#define _DARF_RC5(x) ((x) & 0x1F)
#define _DARF_RC6(x) (((x) & 0x1F) << 8)
#define _DARF_RC7(x) (((x) & 0x1F) << 16)
#define _DARF_RC8(x) (((x) & 0x1F) << 24)
//2 RARFRC
#define _RARF_RC1(x) ((x) & 0x1F)
#define _RARF_RC2(x) (((x) & 0x1F) << 8)
#define _RARF_RC3(x) (((x) & 0x1F) << 16)
#define _RARF_RC4(x) (((x) & 0x1F) << 24)
// NOTE: shift starting from address (RARFRC + 4)
#define _RARF_RC5(x) ((x) & 0x1F)
#define _RARF_RC6(x) (((x) & 0x1F) << 8)
#define _RARF_RC7(x) (((x) & 0x1F) << 16)
#define _RARF_RC8(x) (((x) & 0x1F) << 24)
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
//2 EDCA setting
#define AC_PARAM_TXOP_LIMIT_OFFSET 16
#define AC_PARAM_ECW_MAX_OFFSET 12
#define AC_PARAM_ECW_MIN_OFFSET 8
#define AC_PARAM_AIFS_OFFSET 0
//2 EDCA_VO_PARAM
#define _AIFS(x) (x)
#define _ECW_MAX_MIN(x) ((x) << 8)
#define _TXOP_LIMIT(x) ((x) << 16)
#define _BCNIFS(x) ((x) & 0xFF)
#define _BCNECW(x) (((x) & 0xF))<< 8)
#define _LRL(x) ((x) & 0x3F)
#define _SRL(x) (((x) & 0x3F) << 8)
//2 SIFS_CCK
#define _SIFS_CCK_CTX(x) ((x) & 0xFF)
#define _SIFS_CCK_TRX(x) (((x) & 0xFF) << 8);
//2 SIFS_OFDM
#define _SIFS_OFDM_CTX(x) ((x) & 0xFF)
#define _SIFS_OFDM_TRX(x) (((x) & 0xFF) << 8);
//2 TBTT PROHIBIT
#define _TBTT_PROHIBIT_HOLD(x) (((x) & 0xFF) << 8)
//2 REG_RD_CTRL
#define DIS_EDCA_CNT_DWN BIT(11)
//2 BCN_CTRL
#define EN_MBSSID BIT(1)
#define EN_TXBCN_RPT BIT(2)
#define EN_BCN_FUNCTION BIT(3)
#define DIS_TSF_UPDATE BIT(3)
// The same function but different bit field.
#define DIS_TSF_UDT0_NORMAL_CHIP BIT(4)
#define DIS_TSF_UDT0_TEST_CHIP BIT(5)
//2 ACMHWCTRL
#define AcmHw_HwEn BIT(0)
#define AcmHw_BeqEn BIT(1)
#define AcmHw_ViqEn BIT(2)
#define AcmHw_VoqEn BIT(3)
#define AcmHw_BeqStatus BIT(4)
#define AcmHw_ViqStatus BIT(5)
#define AcmHw_VoqStatus BIT(6)
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
//2 APSD_CTRL
#define APSDOFF BIT(6)
#define APSDOFF_STATUS BIT(7)
//2 BWOPMODE
#define BW_20MHZ BIT(2)
//#define BW_OPMODE_20MHZ BIT(2) // For compability
#define RATE_BITMAP_ALL 0xFFFFF
// Only use CCK 1M rate for ACK
#define RATE_RRSR_CCK_ONLY_1M 0xFFFF1
#define RATE_RRSR_WITHOUT_CCK 0xFFFF0
//2 TCR
#define TSFRST BIT(0)
#define DIS_GCLK BIT(1)
#define PAD_SEL BIT(2)
#define PWR_ST BIT(6)
#define PWRBIT_OW_EN BIT(7)
#define ACRC BIT(8)
#define CFENDFORM BIT(9)
#define ICV BIT(10)
//2 RCR
#define AAP BIT(0)
#define APM BIT(1)
#define AM BIT(2)
#define AB BIT(3)
#define ADD3 BIT(4)
#define APWRMGT BIT(5)
#define CBSSID BIT(6)
#define CBSSID_BCN BIT(7)
#define ACRC32 BIT(8)
#define AICV BIT(9)
#define ADF BIT(11)
#define ACF BIT(12)
#define AMF BIT(13)
#define HTC_LOC_CTRL BIT(14)
#define UC_DATA_EN BIT(16)
#define BM_DATA_EN BIT(17)
#define MFBEN BIT(22)
#define LSIGEN BIT(23)
#define EnMBID BIT(24)
#define APP_BASSN BIT(27)
#define APP_PHYSTS BIT(28)
#define APP_ICV BIT(29)
#define APP_MIC BIT(30)
#define APP_FCS BIT(31)
//2 RX_PKT_LIMIT
//2 RX_DLK_TIME
//2 MBIDCAMCFG
//2 AMPDU_MIN_SPACE
#define _MIN_SPACE(x) ((x) & 0x7)
#define _SHORT_GI_PADDING(x) (((x) & 0x1F) << 3)
//2 RXERR_RPT
#define RXERR_TYPE_OFDM_PPDU 0
#define RXERR_TYPE_OFDM_FALSE_ALARM 1
#define RXERR_TYPE_OFDM_MPDU_OK 2
#define RXERR_TYPE_OFDM_MPDU_FAIL 3
#define RXERR_TYPE_CCK_PPDU 4
#define RXERR_TYPE_CCK_FALSE_ALARM 5
#define RXERR_TYPE_CCK_MPDU_OK 6
#define RXERR_TYPE_CCK_MPDU_FAIL 7
#define RXERR_TYPE_HT_PPDU 8
#define RXERR_TYPE_HT_FALSE_ALARM 9
#define RXERR_TYPE_HT_MPDU_TOTAL 10
#define RXERR_TYPE_HT_MPDU_OK 11
#define RXERR_TYPE_HT_MPDU_FAIL 12
#define RXERR_TYPE_RX_FULL_DROP 15
#define RXERR_COUNTER_MASK 0xFFFFF
#define RXERR_RPT_RST BIT(27)
#define _RXERR_RPT_SEL(type) ((type) << 28)
//2 SECCFG
#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption
#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
#define SCR_SKByA2 BIT(4) //Search kEY BY A2
#define SCR_NoSKMC BIT(5) //No Key Search Multicast
#define SCR_TXBCUSEDK BIT(6) // Force Tx Broadcast packets Use Default Key
#define SCR_RXBCUSEDK BIT(7) // Force Rx Broadcast packets Use Default Key
//vivi added for new cam search flow, 20091028
#ifdef HW_EN_DE_CRYPTION_FOR_NEW_CAM_SEARCH_FLOW
#define SCR_TxUseBroadcastDK BIT6 //Force Tx Use Broadcast Default Key
#define SCR_RxUseBroadcastDK BIT7 //Force Rx Use Broadcast Default Key
#endif
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h USB Configuration
//
//-----------------------------------------------------
//2 USB Information (0xFE17)
#define USB_IS_HIGH_SPEED 0
#define USB_IS_FULL_SPEED 1
#define USB_SPEED_MASK BIT(5)
#define USB_NORMAL_SIE_EP_MASK 0xF
#define USB_NORMAL_SIE_EP_SHIFT 4
#define USB_TEST_EP_MASK 0x30
#define USB_TEST_EP_SHIFT 4
//2 Special Option
#define USB_AGG_EN BIT(3)
//2REG_C2HEVT_CLEAR
#define C2H_EVT_HOST_CLOSE 0x00 // Set by driver and notify FW that the driver has read the C2H command message
#define C2H_EVT_FW_CLOSE 0xFF // Set by FW indicating that FW had set the C2H command message and it's not yet read by driver.
//2 8192D PartNo.
#define PARTNO_92D_NIC (BIT7|BIT6)
#define PARTNO_92D_NIC_REMARK (BIT5|BIT4)
#define PARTNO_SINGLE_BAND_VS BIT3
#define PARTNO_SINGLE_BAND_VS_REMARK BIT1
#define PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2)
#define PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0)
//========================================================
// General definitions
//========================================================
#define MAC_ADDR_LEN 6
#define LAST_ENTRY_OF_TX_PKT_BUFFER 255
#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC 127
#define POLLING_LLT_THRESHOLD 20
#define POLLING_READY_TIMEOUT_COUNT 1000
// Min Spacing related settings.
#define MAX_MSS_DENSITY_2T 0x13
#define MAX_MSS_DENSITY_1T 0x0A
// GPIO BIT
#define HAL_8192C_HW_GPIO_WPS_BIT BIT2
#include "basic_types.h"
#endif
Reference in a new issue Copy permalink