rtl8188eu/include/rtl8723a_spec.h

531 lines
14 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*******************************************************************************/
#ifndef __RTL8723A_SPEC_H__
#define __RTL8723A_SPEC_H__
#include <rtl8192c_spec.h>
//============================================================================
// 8723A Regsiter offset definition
//============================================================================
#define HAL_8723A_NAV_UPPER_UNIT 128 // micro-second
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
#define REG_SYSON_REG_LOCK 0x001C
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
#define REG_FTIMR 0x0138
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
//-----------------------------------------------------
//
// 0x0280h ~ 0x02FFh RXDMA Configuration
//
//-----------------------------------------------------
//-----------------------------------------------------
//
// 0x0300h ~ 0x03FFh PCIe
//
//-----------------------------------------------------
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
#define REG_EARLY_MODE_CONTROL 0x4D0
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
//2 BCN_CTRL
#define DIS_ATIM BIT(0)
#define DIS_BCNQ_SUB BIT(1)
#define DIS_TSF_UDT BIT(4)
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
//
// Note:
// The NAV upper value is very important to WiFi 11n 5.2.3 NAV test. The default value is
// always too small, but the WiFi TestPlan test by 25,000 microseconds of NAV through sending
// CTS in the air. We must update this value greater than 25,000 microseconds to pass the item.
// The offset of NAV_UPPER in 8192C Spec is incorrect, and the offset should be 0x0652. Commented
// by SD1 Scott.
// By Bruce, 2011-07-18.
//
#define REG_NAV_UPPER 0x0652 // unit of 128
//============================================================================
// 8723 Regsiter Bit and Content definition
//============================================================================
//-----------------------------------------------------
//
// 0x0000h ~ 0x00FFh System Configuration
//
//-----------------------------------------------------
//2 SPS0_CTRL
//2 SYS_ISO_CTRL
//2 SYS_FUNC_EN
//2 APS_FSMCO
#define EN_WLON BIT(16)
//2 SYS_CLKR
//2 9346CR
//2 AFE_MISC
//2 SPS0_CTRL
//2 SPS_OCP_CFG
//2 SYSON_REG_LOCK
#define WLOCK_ALL BIT(0)
#define WLOCK_00 BIT(1)
#define WLOCK_04 BIT(2)
#define WLOCK_08 BIT(3)
#define WLOCK_40 BIT(4)
#define WLOCK_1C_B6 BIT(5)
#define R_DIS_PRST_1 BIT(6)
#define LOCK_ALL_EN BIT(7)
//2 RF_CTRL
//2 LDOA15_CTRL
//2 LDOV12D_CTRL
//2 AFE_XTAL_CTRL
//2 AFE_PLL_CTRL
//2 EFUSE_CTRL
//2 EFUSE_TEST (For RTL8723 partially)
//2 PWR_DATA
//2 CAL_TIMER
//2 ACLK_MON
//2 GPIO_MUXCFG
//2 GPIO_PIN_CTRL
//2 GPIO_INTM
//2 LEDCFG
//2 FSIMR
//2 FSISR
//2 HSIMR
// 8723 Host System Interrupt Mask Register (offset 0x58, 32 byte)
#define HSIMR_GPIO12_0_INT_EN BIT(0)
#define HSIMR_SPS_OCP_INT_EN BIT(5)
#define HSIMR_RON_INT_EN BIT(6)
#define HSIMR_PDNINT_EN BIT(7)
#define HSIMR_GPIO9_INT_EN BIT(25)
//2 HSISR
// 8723 Host System Interrupt Status Register (offset 0x5C, 32 byte)
#define HSISR_GPIO12_0_INT BIT(0)
#define HSISR_SPS_OCP_INT BIT(5)
#define HSISR_RON_INT BIT(6)
#define HSISR_PDNINT BIT(7)
#define HSISR_GPIO9_INT BIT(25)
// interrupt mask which needs to clear
#define MASK_HSISR_CLEAR (HSISR_GPIO12_0_INT |\
HSISR_SPS_OCP_INT |\
HSISR_RON_INT |\
HSISR_PDNINT |\
HSISR_GPIO9_INT)
//2 MCUFWDL
#define RAM_DL_SEL BIT7 // 1:RAM, 0:ROM
//2 HPON_FSM
//2 SYS_CFG
#define RTL_ID BIT(23) // TestChip ID, 1:Test(RLE); 0:MP(RL)
#define SPS_SEL BIT(24) // 1:LDO regulator mode; 0:Switching regulator mode
//-----------------------------------------------------
//
// 0x0100h ~ 0x01FFh MACTOP General Configuration
//
//-----------------------------------------------------
//2 Function Enable Registers
//2 CR
#define CALTMR_EN BIT(10)
//2 PBP - Page Size Register
//2 TX/RXDMA
//2 TRXFF_BNDY
//2 LLT_INIT
//2 BB_ACCESS_CTRL
//-----------------------------------------------------
//
// 0x0200h ~ 0x027Fh TXDMA Configuration
//
//-----------------------------------------------------
//2 RQPN
//2 TDECTRL
//2 TDECTL
//2 TXDMA_OFFSET_CHK
//-----------------------------------------------------
//
// 0x0400h ~ 0x047Fh Protocol Configuration
//
//-----------------------------------------------------
//2 FWHW_TXQ_CTRL
//2 INIRTSMCS_SEL
//2 SPEC SIFS
//2 RRSR
//2 ARFR
//2 AGGLEN_LMT_L
//2 RL
//2 DARFRC
//2 RARFRC
//-----------------------------------------------------
//
// 0x0500h ~ 0x05FFh EDCA Configuration
//
//-----------------------------------------------------
//2 EDCA setting
//2 EDCA_VO_PARAM
//2 SIFS_CCK
//2 SIFS_OFDM
//2 TBTT PROHIBIT
//2 REG_RD_CTRL
//2 BCN_CTRL
//2 ACMHWCTRL
//-----------------------------------------------------
//
// 0x0600h ~ 0x07FFh WMAC Configuration
//
//-----------------------------------------------------
//2 APSD_CTRL
//2 BWOPMODE
//2 TCR
//2 RCR
//2 RX_PKT_LIMIT
//2 RX_DLK_TIME
//2 MBIDCAMCFG
//2 AMPDU_MIN_SPACE
//2 RXERR_RPT
//2 SECCFG
//-----------------------------------------------------
//
// 0xFE00h ~ 0xFE55h RTL8723 SDIO Configuration
//
//-----------------------------------------------------
// I/O bus domain address mapping
#define SDIO_LOCAL_BASE 0x10250000
#define WLAN_IOREG_BASE 0x10260000
#define FIRMWARE_FIFO_BASE 0x10270000
#define TX_HIQ_BASE 0x10310000
#define TX_MIQ_BASE 0x10320000
#define TX_LOQ_BASE 0x10330000
#define RX_RX0FF_BASE 0x10340000
// SDIO host local register space mapping.
#define SDIO_LOCAL_MSK 0x0FFF
#define WLAN_IOREG_MSK 0x7FFF
#define WLAN_FIFO_MSK 0x1FFF // Aggregation Length[12:0]
#define WLAN_RX0FF_MSK 0x0003
#define SDIO_WITHOUT_REF_DEVICE_ID 0 // Without reference to the SDIO Device ID
#define SDIO_LOCAL_DEVICE_ID 0 // 0b[16], 000b[15:13]
#define WLAN_TX_HIQ_DEVICE_ID 4 // 0b[16], 100b[15:13]
#define WLAN_TX_MIQ_DEVICE_ID 5 // 0b[16], 101b[15:13]
#define WLAN_TX_LOQ_DEVICE_ID 6 // 0b[16], 110b[15:13]
#define WLAN_RX0FF_DEVICE_ID 7 // 0b[16], 111b[15:13]
#define WLAN_IOREG_DEVICE_ID 8 // 1b[16]
// SDIO Tx Free Page Index
#define HI_QUEUE_IDX 0
#define MID_QUEUE_IDX 1
#define LOW_QUEUE_IDX 2
#define PUBLIC_QUEUE_IDX 3
#define SDIO_MAX_TX_QUEUE 3 // HIQ, MIQ and LOQ
#define SDIO_MAX_RX_QUEUE 1
#define SDIO_REG_TX_CTRL 0x0000 // SDIO Tx Control
#define SDIO_REG_HIMR 0x0014 // SDIO Host Interrupt Mask
#define SDIO_REG_HISR 0x0018 // SDIO Host Interrupt Service Routine
#define SDIO_REG_HCPWM 0x0019 // HCI Current Power Mode
#define SDIO_REG_RX0_REQ_LEN 0x001C // RXDMA Request Length
#define SDIO_REG_FREE_TXPG 0x0020 // Free Tx Buffer Page
#define SDIO_REG_HCPWM1 0x0024 // HCI Current Power Mode 1
#define SDIO_REG_HCPWM2 0x0026 // HCI Current Power Mode 2
#define SDIO_REG_HTSFR_INFO 0x0030 // HTSF Informaion
#define SDIO_REG_HRPWM1 0x0080 // HCI Request Power Mode 1
#define SDIO_REG_HRPWM2 0x0082 // HCI Request Power Mode 2
#define SDIO_REG_HPS_CLKR 0x0084 // HCI Power Save Clock
#define SDIO_REG_HSUS_CTRL 0x0086 // SDIO HCI Suspend Control
#define SDIO_REG_HIMR_ON 0x0090 // SDIO Host Extension Interrupt Mask Always
#define SDIO_REG_HISR_ON 0x0091 // SDIO Host Extension Interrupt Status Always
#define SDIO_HIMR_DISABLED 0
// SDIO Host Interrupt Mask Register
#define SDIO_HIMR_RX_REQUEST_MSK BIT0
#define SDIO_HIMR_AVAL_MSK BIT1
#define SDIO_HIMR_TXERR_MSK BIT2
#define SDIO_HIMR_RXERR_MSK BIT3
#define SDIO_HIMR_TXFOVW_MSK BIT4
#define SDIO_HIMR_RXFOVW_MSK BIT5
#define SDIO_HIMR_TXBCNOK_MSK BIT6
#define SDIO_HIMR_TXBCNERR_MSK BIT7
#define SDIO_HIMR_BCNERLY_INT_MSK BIT16
#define SDIO_HIMR_C2HCMD_MSK BIT17
#define SDIO_HIMR_CPWM1_MSK BIT18
#define SDIO_HIMR_CPWM2_MSK BIT19
#define SDIO_HIMR_HSISR_IND_MSK BIT20
#define SDIO_HIMR_GTINT3_IND_MSK BIT21
#define SDIO_HIMR_GTINT4_IND_MSK BIT22
#define SDIO_HIMR_PSTIMEOUT_MSK BIT23
#define SDIO_HIMR_OCPINT_MSK BIT24
#define SDIO_HIMR_ATIMEND_MSK BIT25
#define SDIO_HIMR_ATIMEND_E_MSK BIT26
#define SDIO_HIMR_CTWEND_MSK BIT27
// SDIO Host Interrupt Service Routine
#define SDIO_HISR_RX_REQUEST BIT0
#define SDIO_HISR_AVAL BIT1
#define SDIO_HISR_TXERR BIT2
#define SDIO_HISR_RXERR BIT3
#define SDIO_HISR_TXFOVW BIT4
#define SDIO_HISR_RXFOVW BIT5
#define SDIO_HISR_TXBCNOK BIT6
#define SDIO_HISR_TXBCNERR BIT7
#define SDIO_HISR_BCNERLY_INT BIT16
#define SDIO_HISR_C2HCMD BIT17
#define SDIO_HISR_CPWM1 BIT18
#define SDIO_HISR_CPWM2 BIT19
#define SDIO_HISR_HSISR_IND BIT20
#define SDIO_HISR_GTINT3_IND BIT21
#define SDIO_HISR_GTINT4_IND BIT22
#define SDIO_HISR_PSTIME BIT23
#define SDIO_HISR_OCPINT BIT24
#define SDIO_HISR_ATIMEND BIT25
#define SDIO_HISR_ATIMEND_E BIT26
#define SDIO_HISR_CTWEND BIT27
#define MASK_SDIO_HISR_CLEAR (SDIO_HISR_TXERR |\
SDIO_HISR_RXERR |\
SDIO_HISR_TXFOVW |\
SDIO_HISR_RXFOVW |\
SDIO_HISR_TXBCNOK |\
SDIO_HISR_TXBCNERR |\
SDIO_HISR_C2HCMD |\
SDIO_HISR_CPWM1 |\
SDIO_HISR_CPWM2 |\
SDIO_HISR_HSISR_IND |\
SDIO_HISR_GTINT3_IND |\
SDIO_HISR_GTINT4_IND |\
SDIO_HISR_PSTIMEOUT |\
SDIO_HISR_OCPINT)
// SDIO HCI Suspend Control Register
#define HCI_RESUME_PWR_RDY BIT1
#define HCI_SUS_CTRL BIT0
// SDIO Tx FIFO related
#define SDIO_TX_FREE_PG_QUEUE 4 // The number of Tx FIFO free page
#define SDIO_TX_FIFO_PAGE_SZ 128
// vivi added for new cam search flow, 20091028
#define SCR_TxUseBroadcastDK BIT6 // Force Tx Use Broadcast Default Key
#define SCR_RxUseBroadcastDK BIT7 // Force Rx Use Broadcast Default Key
//----------------------------------------------------------------------------
// 8723 EFUSE
//----------------------------------------------------------------------------
#ifdef HWSET_MAX_SIZE
#undef HWSET_MAX_SIZE
#endif
#define HWSET_MAX_SIZE 256
//-----------------------------------------------------------------------------
//USB interrupt
//-----------------------------------------------------------------------------
#define UHIMR_TIMEOUT2 BIT31
#define UHIMR_TIMEOUT1 BIT30
#define UHIMR_PSTIME BIT29
#define UHIMR_GTINT4 BIT28
#define UHIMR_GTINT3 BIT27
#define UHIMR_TXBCNERR BIT26
#define UHIMR_TXBCNOK BIT25
#define UHIMR_TSF_BIT32_TOGGLE BIT24
#define UHIMR_BCNDMAINT3 BIT23
#define UHIMR_BCNDMAINT2 BIT22
#define UHIMR_BCNDMAINT1 BIT21
#define UHIMR_BCNDMAINT0 BIT20
#define UHIMR_BCNDOK3 BIT19
#define UHIMR_BCNDOK2 BIT18
#define UHIMR_BCNDOK1 BIT17
#define UHIMR_BCNDOK0 BIT16
#define UHIMR_HSISR_IND BIT15
#define UHIMR_BCNDMAINT_E BIT14
//RSVD BIT13
#define UHIMR_CTW_END BIT12
//RSVD BIT11
#define UHIMR_C2HCMD BIT10
#define UHIMR_CPWM2 BIT9
#define UHIMR_CPWM BIT8
#define UHIMR_HIGHDOK BIT7 // High Queue DMA OK Interrupt
#define UHIMR_MGNTDOK BIT6 // Management Queue DMA OK Interrupt
#define UHIMR_BKDOK BIT5 // AC_BK DMA OK Interrupt
#define UHIMR_BEDOK BIT4 // AC_BE DMA OK Interrupt
#define UHIMR_VIDOK BIT3 // AC_VI DMA OK Interrupt
#define UHIMR_VODOK BIT2 // AC_VO DMA Interrupt
#define UHIMR_RDU BIT1 // Receive Descriptor Unavailable
#define UHIMR_ROK BIT0 // Receive DMA OK Interrupt
// USB Host Interrupt Status Extension bit
#define UHIMR_BCNDMAINT7 BIT23
#define UHIMR_BCNDMAINT6 BIT22
#define UHIMR_BCNDMAINT5 BIT21
#define UHIMR_BCNDMAINT4 BIT20
#define UHIMR_BCNDOK7 BIT19
#define UHIMR_BCNDOK6 BIT18
#define UHIMR_BCNDOK5 BIT17
#define UHIMR_BCNDOK4 BIT16
// bit14-15: RSVD
#define UHIMR_ATIMEND_E BIT13
#define UHIMR_ATIMEND BIT12
#define UHIMR_TXERR BIT11
#define UHIMR_RXERR BIT10
#define UHIMR_TXFOVW BIT9
#define UHIMR_RXFOVW BIT8
// bit2-7: RSVD
#define UHIMR_OCPINT BIT1
// bit0: RSVD
#define REG_USB_HIMR 0xFE38
#define REG_USB_HIMRE 0xFE3C
#define REG_USB_HISR 0xFE78
#define REG_USB_HISRE 0xFE7C
#define USB_INTR_CPWM_OFFSET 16
#define USB_INTR_CONTENT_HISR_OFFSET 48
#define USB_INTR_CONTENT_HISRE_OFFSET 52
#define USB_INTR_CONTENT_LENGTH 56
#define USB_C2H_CMDID_OFFSET 0
#define USB_C2H_SEQ_OFFSET 1
#define USB_C2H_EVENT_OFFSET 2
//============================================================================
// General definitions
//============================================================================
#endif