rtl8188eu/include/rtl8814a_hal.h

325 lines
13 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8814A_HAL_H__
#define __RTL8814A_HAL_H__
/* #include "hal_com.h" */
#include "hal_data.h"
/* include HAL Related header after HAL Related compiling flags */
#include "rtl8814a_spec.h"
#include "rtl8814a_rf.h"
#include "rtl8814a_dm.h"
#include "rtl8814a_recv.h"
#include "rtl8814a_xmit.h"
#include "rtl8814a_cmd.h"
#include "rtl8814a_led.h"
#include "Hal8814PwrSeq.h"
#include "Hal8814PhyReg.h"
#include "Hal8814PhyCfg.h"
#ifdef DBG_CONFIG_ERROR_DETECT
#include "rtl8814a_sreset.h"
#endif /* DBG_CONFIG_ERROR_DETECT */
enum {
VOLTAGE_V25 = 0x03,
LDOE25_SHIFT = 28 ,
};
/* max. iram is 64k , max dmen is 32k. Total = 96k = 0x18000*/
#define FW_SIZE 0x18000
#define FW_START_ADDRESS 0x1000
typedef struct _RT_FIRMWARE_8814 {
FIRMWARE_SOURCE eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
u8 *szFwBuffer;
#else
u8 szFwBuffer[FW_SIZE];
#endif
u32 ulFwLength;
} RT_FIRMWARE_8814, *PRT_FIRMWARE_8814;
#define PAGE_SIZE_TX_8814 PAGE_SIZE_128
#define BCNQ_PAGE_NUM_8814 0x08
#define Rtl8814A_NIC_PWR_ON_FLOW rtl8814A_power_on_flow
#define Rtl8814A_NIC_RF_OFF_FLOW rtl8814A_radio_off_flow
#define Rtl8814A_NIC_DISABLE_FLOW rtl8814A_card_disable_flow
#define Rtl8814A_NIC_ENABLE_FLOW rtl8814A_card_enable_flow
#define Rtl8814A_NIC_SUSPEND_FLOW rtl8814A_suspend_flow
#define Rtl8814A_NIC_RESUME_FLOW rtl8814A_resume_flow
#define Rtl8814A_NIC_PDN_FLOW rtl8814A_hwpdn_flow
#define Rtl8814A_NIC_LPS_ENTER_FLOW rtl8814A_enter_lps_flow
#define Rtl8814A_NIC_LPS_LEAVE_FLOW rtl8814A_leave_lps_flow
/* *****************************************************
* New Firmware Header(8-byte alinment required)
* *****************************************************
* --- LONG WORD 0 ---- */
#define GET_FIRMWARE_HDR_SIGNATURE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 0, 16)
#define GET_FIRMWARE_HDR_CATEGORY_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 16, 8) /* AP/NIC and USB/PCI */
#define GET_FIRMWARE_HDR_FUNCTION_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr, 24, 8) /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
#define GET_FIRMWARE_HDR_VERSION_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 0, 16)/* FW Version */
#define GET_FIRMWARE_HDR_SUB_VER_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 16, 8) /* FW Subversion, default 0x00 */
#define GET_FIRMWARE_HDR_SUB_IDX_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+4, 24, 8) /* FW Subversion Index */
/* --- LONG WORD 1 ---- */
#define GET_FIRMWARE_HDR_SVN_IDX_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+8, 0, 32)/* The SVN entry index */
#define GET_FIRMWARE_HDR_RSVD1_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+12, 0, 32)
/* --- LONG WORD 2 ---- */
#define GET_FIRMWARE_HDR_MONTH_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 0, 8) /* Release time Month field */
#define GET_FIRMWARE_HDR_DATE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 8, 8) /* Release time Date field */
#define GET_FIRMWARE_HDR_HOUR_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 16, 8)/* Release time Hour field */
#define GET_FIRMWARE_HDR_MINUTE_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+16, 24, 8)/* Release time Minute field */
#define GET_FIRMWARE_HDR_YEAR_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 0, 16)/* Release time Year field */
#define GET_FIRMWARE_HDR_FOUNDRY_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 16, 8)/* Release time Foundry field */
#define GET_FIRMWARE_HDR_RSVD2_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+20, 24, 8)
/* --- LONG WORD 3 ---- */
#define GET_FIRMWARE_HDR_MEM_UASGE_DL_FROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 0, 1)
#define GET_FIRMWARE_HDR_MEM_UASGE_BOOT_FROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 1, 1)
#define GET_FIRMWARE_HDR_MEM_UASGE_BOOT_LOADER_3081(__FwHdr)LE_BITS_TO_4BYTE(__FwHdr+24, 2, 1)
#define GET_FIRMWARE_HDR_MEM_UASGE_IRAM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 3, 1)
#define GET_FIRMWARE_HDR_MEM_UASGE_ERAM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 4, 1)
#define GET_FIRMWARE_HDR_MEM_UASGE_RSVD4_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 5, 3)
#define GET_FIRMWARE_HDR_RSVD3_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 8, 8)
#define GET_FIRMWARE_HDR_BOOT_LOADER_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+24, 16, 16)
#define GET_FIRMWARE_HDR_RSVD5_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+28, 0, 32)
/* --- LONG WORD 4 ---- */
#define GET_FIRMWARE_HDR_TOTAL_DMEM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 0, 32)
#define GET_FIRMWARE_HDR_FW_CFG_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 0, 16)
#define GET_FIRMWARE_HDR_FW_ATTR_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+36, 16, 16)
/* --- LONG WORD 5 ---- */
#define GET_FIRMWARE_HDR_IROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+40, 0, 32)
#define GET_FIRMWARE_HDR_EROM_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+44, 0, 32)
/* --- LONG WORD 6 ---- */
#define GET_FIRMWARE_HDR_IRAM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+48, 0, 32)
#define GET_FIRMWARE_HDR_ERAM_SZ_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+52, 0, 32)
/* --- LONG WORD 7 ---- */
#define GET_FIRMWARE_HDR_RSVD6_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+56, 0, 32)
#define GET_FIRMWARE_HDR_RSVD7_3081(__FwHdr) LE_BITS_TO_4BYTE(__FwHdr+60, 0, 32)
/*
* 2013/08/16 MH MOve from SDIO.h for common use.
* */
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI)
#define TRX_SHARE_MODE_8814A 0 /* TRX Buffer Share Index */
#define BASIC_RXFF_SIZE_8814A 24576/* Basic RXFF Size is 24K = 24*1024 Unit: Byte */
#define TRX_SHARE_BUFF_UNIT_8814A 65536/* TRX Share Buffer unit Size 64K = 64*1024 Unit: Byte */
#define TRX_SHARE_BUFF_UNIT_PAGE_8814A (TRX_SHARE_BUFF_UNIT_8814A/PAGE_SIZE_8814A)/* 512 Pages */
/* Origin: */
#define HPQ_PGNUM_8814A 0x20 /* High Queue */
#define LPQ_PGNUM_8814A 0x20 /* Low Queue */
#define NPQ_PGNUM_8814A 0x20 /* Normal Queue */
#define EPQ_PGNUM_8814A 0x20 /* Extra Queue */
#else /* #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI) */
#define HPQ_PGNUM_8814A 20
#define NPQ_PGNUM_8814A 20
#define LPQ_PGNUM_8814A 20 /* 1972 */
#define EPQ_PGNUM_8814A 20
#define BCQ_PGNUM_8814A 32
#endif /* #if defined(CONFIG_SDIO_HCI) || defined(CONFIG_USB_HCI) */
#ifdef CONFIG_WOWLAN
#define WOWLAN_PAGE_NUM_8814 0x00
#else
#define WOWLAN_PAGE_NUM_8814 0x00
#endif
#define PAGE_SIZE_8814A 128/* TXFF Page Size, Unit: Byte */
#define MAX_RX_DMA_BUFFER_SIZE_8814A 0x5C00 /* BASIC_RXFF_SIZE_8814A + TRX_SHARE_MODE_8814A * TRX_SHARE_BUFF_UNIT_8814A */ /* Basic RXFF Size + ShareBuffer Size */
#define TX_PAGE_BOUNDARY_8814A TXPKT_PGNUM_8814A /* Need to enlarge boundary, by KaiYuan */
#define TX_PAGE_BOUNDARY_WOWLAN_8814A TXPKT_PGNUM_8814A /* TODO: 20130415 KaiYuan Check this value later */
#ifdef CONFIG_FW_C2H_DEBUG
#define RX_DMA_RESERVED_SIZE_8814A 0x100 /* 256B, reserved for c2h debug message */
#else
#define RX_DMA_RESERVED_SIZE_8814A 0x0 /* 0B */
#endif
#define RX_DMA_BOUNDARY_8814A (MAX_RX_DMA_BUFFER_SIZE_8814A - RX_DMA_RESERVED_SIZE_8814A - 1)
#define TOTAL_PGNUM_8814A 2048
#define TXPKT_PGNUM_8814A (2048 - BCNQ_PAGE_NUM_8814-WOWLAN_PAGE_NUM_8814)
#define PUB_PGNUM_8814A (TXPKT_PGNUM_8814A-HPQ_PGNUM_8814A-NPQ_PGNUM_8814A-LPQ_PGNUM_8814A-EPQ_PGNUM_8814A)
/* Note: For WMM Normal Chip Setting ,modify later */
#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8814A TX_PAGE_BOUNDARY_8814A
#define WMM_NORMAL_TX_PAGE_BOUNDARY_8814A (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER_8814A + 1)
#define DRIVER_EARLY_INT_TIME_8814 0x05
#define BCN_DMA_ATIME_INT_TIME_8814 0x02
#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */
#define EFUSE_MAX_SECTION_JAGUAR 64
#define HWSET_MAX_SIZE_8814A 512
#define EFUSE_REAL_CONTENT_LEN_8814A 1024
#define EFUSE_MAX_BANK_8814A 2
#define EFUSE_MAP_LEN_8814A 512
#define EFUSE_MAX_SECTION_8814A 64
#define EFUSE_MAX_WORD_UNIT_8814A 4
#define EFUSE_PROTECT_BYTES_BANK_8814A 16
#define EFUSE_IC_ID_OFFSET_8814A 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */
#define AVAILABLE_EFUSE_ADDR_8814A(addr) (addr < EFUSE_REAL_CONTENT_LEN_8814A)
/*-------------------------------------------------------------------------
Chip specific
-------------------------------------------------------------------------*/
/* pic buffer descriptor */
#if 1 /* according to the define in the rtw_xmit.h, rtw_recv.h */
#define RTL8814AE_SEG_NUM TX_BUFFER_SEG_NUM /* 0:2 seg, 1: 4 seg, 2: 8 seg */
#define TX_DESC_NUM_8814A TXDESC_NUM /* 128 */
#define RX_DESC_NUM_8814A PCI_MAX_RX_COUNT /* 128 */
#ifdef CONFIG_CONCURRENT_MODE
#define BE_QUEUE_TX_DESC_NUM_8814A (TXDESC_NUM<<1) /* 256 */
#else
#define BE_QUEUE_TX_DESC_NUM_8814A (TXDESC_NUM+(TXDESC_NUM>>1)) /* 192 */
#endif
#else
#define RTL8814AE_SEG_NUM TX_BUFFER_SEG_NUM /* 0:2 seg, 1: 4 seg, 2: 8 seg */
#define TX_DESC_NUM_8814A 128 /* 1024//2048 change by ylb 20130624 */
#define RX_DESC_NUM_8814A 128 /* 1024 //512 change by ylb 20130624 */
#endif
/* <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
* 9bytes + 1byt + 5bytes and pre 1byte.
* For worst case:
* | 1byte|----8bytes----|1byte|--5bytes--|
* | | Reserved(14bytes) |
* */
#define EFUSE_OOB_PROTECT_BYTES 15 /* PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. */
/* rtl8814_hal_init.c */
s32 FirmwareDownload8814A(PADAPTER Adapter, BOOLEAN bUsedWoWLANFw);
void InitializeFirmwareVars8814(PADAPTER padapter);
VOID
Hal_InitEfuseVars_8814A(
IN PADAPTER Adapter
);
s32 InitLLTTable8814A(
IN PADAPTER Adapter
);
void InitRDGSetting8814A(PADAPTER padapter);
/* void CheckAutoloadState8812A(PADAPTER padapter); */
/* EFuse */
u8 GetEEPROMSize8814A(PADAPTER padapter);
VOID hal_InitPGData_8814A(
IN PADAPTER padapter,
IN OUT u8 *PROMContent
);
void hal_ReadPROMVersion8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void hal_ReadTxPowerInfo8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void hal_ReadBoardType8814A(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void hal_ReadThermalMeter_8814A(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void hal_ReadChannelPlan8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void hal_EfuseParseXtal_8814A(PADAPTER pAdapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void hal_ReadAntennaDiversity8814A(PADAPTER pAdapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void hal_Read_TRX_antenna_8814A(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
VOID hal_ReadAmplifierType_8814A(
IN PADAPTER Adapter
);
VOID hal_ReadPAType_8814A(
IN PADAPTER Adapter,
IN u8 *PROMContent,
IN BOOLEAN AutoloadFail,
OUT u8 *pPAType,
OUT u8 *pLNAType
);
void hal_ReadPowerTrackingType_8814A(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void hal_GetRxGainOffset_8814A(
PADAPTER Adapter,
pu1Byte PROMContent,
BOOLEAN AutoloadFail
);
void Hal_EfuseParseKFreeData_8814A(
IN PADAPTER Adapter,
IN u8 *PROMContent,
IN BOOLEAN AutoloadFail);
void hal_ReadRFEType_8814A(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void hal_EfuseParseBTCoexistInfo8814A(PADAPTER Adapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
/* void hal_ReadUsbType_8812AU(PADAPTER Adapter, u8 *PROMContent, BOOLEAN AutoloadFail);
* int FirmwareDownloadBT(PADAPTER Adapter, PRT_MP_FIRMWARE pFirmware); */
void hal_ReadRemoteWakeup_8814A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
u8 MgntQuery_NssTxRate(u16 Rate);
/* BOOLEAN HalDetectPwrDownMode8812(PADAPTER Adapter); */
#ifdef CONFIG_WOWLAN
void Hal_DetectWoWMode(PADAPTER pAdapter);
#endif /* CONFIG_WOWLAN */
void _InitBeaconParameters_8814A(PADAPTER padapter);
void SetBeaconRelatedRegisters8814A(PADAPTER padapter);
void ReadRFType8814A(PADAPTER padapter);
void InitDefaultValue8814A(PADAPTER padapter);
void SetHwReg8814A(PADAPTER padapter, u8 variable, u8 *pval);
void GetHwReg8814A(PADAPTER padapter, u8 variable, u8 *pval);
u8 SetHalDefVar8814A(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval);
u8 GetHalDefVar8814A(PADAPTER padapter, HAL_DEF_VARIABLE variable, void *pval);
void rtl8814_set_hal_ops(struct hal_ops *pHalFunc);
void init_hal_spec_8814a(_adapter *adapter);
/* register */
void SetBcnCtrlReg(PADAPTER padapter, u8 SetBits, u8 ClearBits);
void SetBcnCtrlReg(PADAPTER Adapter, u8 SetBits, u8 ClearBits);
void rtl8814_start_thread(PADAPTER padapter);
void rtl8814_stop_thread(PADAPTER padapter);
#ifdef CONFIG_PCI_HCI
BOOLEAN InterruptRecognized8814AE(PADAPTER Adapter);
VOID UpdateInterruptMask8814AE(PADAPTER Adapter, u32 AddMSR, u32 AddMSR1, u32 RemoveMSR, u32 RemoveMSR1);
u16 get_txbd_idx_addr(u16 ff_hwaddr);
#endif
#ifdef CONFIG_BT_COEXIST
void rtl8812a_combo_card_WifiOnlyHwInit(PADAPTER Adapter);
#endif
#endif /* __RTL8188E_HAL_H__ */