rtl8188eu/control_ap

#!/bin/sh
# Script to start/stop a hostapd-based access point
#
# Sample start call "control_ap start wlan0 eth0 encrypt"
# Stop with "control_ap stop"
#

ENCRYPT=$4
case "$1" in
start)
	if [ $# -le 2 ]
	then
	  echo "Usage: $0 start AP_iface NET_iface <encrypt>"
	  echo "       Optional encrypt is wpa, wpa2, wep, or none. If not given, wpa2 is assumed"
	  exit 1
	fi
	if [ $# -eq 3 ]
	then
	  ENCRYPT="wpa2"
	fi
;;
stop)
	if [ $# -ne 1 ]
	then
	  echo "Usage: $0 stop"
	  exit 1
	fi
;;
*)
        echo "Usage:"
	echo "$0 start AP-iface net_iface <encrypt>"
	echo "or"
	echo "$0 stop"
        exit 1
        ;;
esac

# Symbols for needed programs

IPTABLES=/usr/sbin/iptables
IFCONFIG=/usr/bin/ifconfig
DHCPD=/sbin/dhcpd
HOSTAPD=/home/finger/hostapd-2.9/hostapd/hostapd
#HOSTAPD=/sbin/hostapd
#HOSTAPD=/home/finger/hostapd-0.8/hostapd/hostapd
OPT=-ddK



NET_AP=$2
NET_EXT=$3

# First 3 octets of IP address for the AP

AP_ADDR=192.168.0

# IP address for nameserver

NAME_SERVER=8.8.8.8

# AP Channel, SSID, Encryption method,  and Encryption secret

AP_CHANNEL=6
AP_SSID=TEST-LARRY
WPA_SECRET=TheSecret
WEP_SECRET=123456789a

case "$1" in
start)
        echo "Starting AP mode for $NET_AP at address $AP_ADDR"
        # Disable packet forwarding
        echo 0 > /proc/sys/net/ipv4/ip_forward
        # Stop any existing hostapd and dhcpd daemons
        killproc hostapd
        killproc dhcpd
        #Set up forwarding
        $IPTABLES -t nat -A POSTROUTING -o $NET_EXT -j MASQUERADE
        $IPTABLES -A FORWARD -i $NET_EXT -o $NET_AP -m state \
		--state RELATED,ESTABLISHED -j ACCEPT
        $IPTABLES -A FORWARD -i $NET_AP -o $NET_EXT -j ACCEPT
        # Enable packet forwarding
        echo 1 > /proc/sys/net/ipv4/ip_forward
        # Get the AP interface in the right state
        $IFCONFIG $NET_AP down
        $IFCONFIG $NET_AP up
        $IFCONFIG $NET_AP $AP_ADDR.1
        # dhcpd needs to have a leases file available - create it if needed
        if [ ! -f /var/lib/dhcp/db/dhcpd.leases ]; then
                touch /var/lib/dhcp/db/dhcpd.leases
        fi
	# Write the DHCP server configuration file
	echo "option domain-name-servers $NAME_SERVER;" > ~/dhcpd.conf
	echo "default-lease-time 600;" >> ~/dhcpd.conf
	echo "max-lease-time 7200;" >> ~/dhcpd.conf
	echo "ddns-update-style none; ddns-updates off;" >> ~/dhcpd.conf
	echo "subnet $AP_ADDR.0 netmask 255.255.255.0 {" >> ~/dhcpd.conf
	echo "        range $AP_ADDR.200 $AP_ADDR.229;" >> ~/dhcpd.conf
	echo "        option subnet-mask 255.255.255.0;" >> ~/dhcpd.conf
	echo "        option broadcast-address $AP_ADDR.255;" >> ~/dhcpd.conf
	echo "        option routers $AP_ADDR.1;" >> ~/dhcpd.conf
	echo "}" >> ~/dhcpd.conf
        $DHCPD -cf ~/dhcpd.conf $NET_AP
	# Write the hostapd configuration file
	echo "interface=$NET_AP" > ~/hostapd.conf
	echo "driver=nl80211" >> ~/hostapd.conf
	# echo "driver=rtl871x" >> ~/hostapd.conf
	echo "hw_mode=g" >> ~/hostapd.conf
	echo "channel=$AP_CHANNEL" >> ~/hostapd.conf
	case "$ENCRYPT" in
	"wpa")
		echo "Setting up wpa"
		echo "wpa=1" >> ~/hostapd.conf
		echo "wpa_key_mgmt=WPA-PSK" >> ~/hostapd.conf
		echo "wpa_pairwise=TKIP" >> ~/hostapd.conf
		echo "wpa_passphrase=$WPA_SECRET" >> ~/hostapd.conf
		echo "ssid=$AP_SSID-wpa" >> ~/hostapd.conf
		;;
	"wpa2")
		echo "Setting up wpa2"
		echo "wpa=2" >> ~/hostapd.conf
#		echo "wpa_key_mgmt=WPA-PSK" >> ~/hostapd.conf
		echo "wpa_pairwise=CCMP" >> ~/hostapd.conf
		echo "rsn_pairwise=CCMP" >> ~/hostapd.conf
		echo "wpa_passphrase=$WPA_SECRET" >> ~/hostapd.conf
		echo "ssid=$AP_SSID-wpa2" >> ~/hostapd.conf
		;;
	"wep")
		echo "Setting up wep"
		echo "wep_default_key=0" >> ~/hostapd.conf
		echo "wep_key0=$WEP_SECRET" >> ~/hostapd.conf
		echo "ssid=$AP_SSID-wep" >> ~/hostapd.conf
		;;
	"none")
		echo "No encryption"
		echo "ssid=$AP_SSID" >> ~/hostapd.conf
		;;
	*)
		echo "Improper value for encryption"
		exit 1
		;;
	esac
#	echo "ssid=$AP_SSID" >> ~/hostapd.conf
	echo "beacon_int=100" >> ~/hostapd.conf
	echo "dtim_period=2" >> ~/hostapd.conf
	echo "max_num_sta=20" >> ~/hostapd.conf
	echo "rts_threshold=2347" >> ~/hostapd.conf
	echo "fragm_threshold=2346" >> ~/hostapd.conf
	echo "preamble=1" >> ~/hostapd.conf
	echo "macaddr_acl=0" >> ~/hostapd.conf
	echo "auth_algs=1" >> ~/hostapd.conf
	echo "ignore_broadcast_ssid=0" >> ~/hostapd.conf
	echo "wmm_enabled=1" >> ~/hostapd.conf
	echo "wmm_ac_bk_cwmin=4" >> ~/hostapd.conf
	echo "wmm_ac_bk_cwmax=10" >> ~/hostapd.conf
	echo "wmm_ac_bk_aifs=7" >> ~/hostapd.conf
	echo "wmm_ac_bk_txop_limit=0" >> ~/hostapd.conf
	echo "wmm_ac_bk_acm=0" >> ~/hostapd.conf
	echo "wmm_ac_be_aifs=3" >> ~/hostapd.conf
	echo "wmm_ac_be_cwmin=4" >> ~/hostapd.conf
	echo "wmm_ac_be_cwmax=10" >> ~/hostapd.conf
	echo "wmm_ac_be_txop_limit=0" >> ~/hostapd.conf
	echo "wmm_ac_be_acm=0" >> ~/hostapd.conf
	echo "wmm_ac_vi_aifs=2" >> ~/hostapd.conf
	echo "wmm_ac_vi_cwmin=3" >> ~/hostapd.conf
	echo "wmm_ac_vi_cwmax=4" >> ~/hostapd.conf
	echo "wmm_ac_vi_txop_limit=94" >> ~/hostapd.conf
	echo "wmm_ac_vi_acm=0" >> ~/hostapd.conf
	echo "wmm_ac_vo_aifs=2" >> ~/hostapd.conf
	echo "wmm_ac_vo_cwmin=2" >> ~/hostapd.conf
	echo "wmm_ac_vo_cwmax=3" >> ~/hostapd.conf
	echo "wmm_ac_vo_txop_limit=47" >> ~/hostapd.conf
	echo "wmm_ac_vo_acm=0" >> ~/hostapd.conf
	#echo "ieee80211n=1" >> ~/hostapd.conf
	#echo "ht_capab=[HT40+][SHORT-GI-40][DSSS_CCK-40]" >> ~/hostapd.conf
	echo "logger_syslog=-1" >> ~/hostapd.conf
	echo "logger_syslog_level=0" >> ~/hostapd.conf
	echo "logger_stdout=-1" >> ~/hostapd.conf
	echo "logger_stdout_level=0" >> ~/hostapd.conf
	echo "ctrl_interface=/var/run/hostapd" >> ~/hostapd.conf
	echo "ctrl_interface_group=0" >> ~/hostapd.conf

        # Bring up hostapd
        $HOSTAPD $OPT -B -dd ~/hostapd.conf
        ;;
stop)
        echo "Stopping AP mode"
        # Stop hostapd and dhcpd daemons
        killproc hostapd
        killproc dhcpd
#	rm -f ~/hostapd.conf
	rm -f ~/dhcpd.conf
        ;;
esac