rtl8188eu: Replace PVOID and VOID

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

hal/rtl8188e_phycfg.c

@@ -142,7 +142,7 @@ sic_CalculateBitShift(
 
 static u32
 sic_Read4Byte(
-	PVOID		Adapter,
+	void *		Adapter,
 	u32		offset
 	)
 {
@@ -193,9 +193,9 @@ sic_Read4Byte(
 	return u4ret;
 }
 
-static VOID
+static void
 sic_Write4Byte(
-	PVOID		Adapter,
+	void *		Adapter,
 	u32		offset,
 	u32		data
 	)
@@ -239,7 +239,7 @@ sic_Write4Byte(
 //============================================================
 // extern function
 //============================================================
-static VOID
+static void
 SIC_SetBBReg(
 	IN	struct adapter *Adapter,
 	IN	u32		RegAddr,
@@ -322,7 +322,7 @@ SIC_QueryBBReg(
 	return (ReturnValue);
 }
 
-VOID
+void
 SIC_Init(
 	IN	struct adapter *Adapter
 	)
@@ -423,7 +423,7 @@ rtl8188e_PHY_QueryBBReg(
 * Note:		This function is equal to "PutRegSetting" in PHY programming guide
 */
 
-VOID
+void
 rtl8188e_PHY_SetBBReg(
 	IN	struct adapter *Adapter,
 	IN	u32		RegAddr,
@@ -599,7 +599,7 @@ phy_RFSerialRead(
  *
  *
 */
-static	VOID
+static	void
 phy_RFSerialWrite(
 	IN	struct adapter *		Adapter,
 	IN	RF_RADIO_PATH_E	eRFPath,
@@ -689,7 +689,7 @@ rtl8188e_PHY_QueryRFReg(
 * Return:		None
 * Note:		This function is equal to "PutRFRegSetting" in PHY programming guide
 */
-VOID
+void
 rtl8188e_PHY_SetRFReg(
 	IN	struct adapter *		Adapter,
 	IN	RF_RADIO_PATH_E	eRFPath,
@@ -872,7 +872,7 @@ s32 PHY_MACConfig8188E(struct adapter *Adapter)
 * Return:		None
 * Note:		The initialization value is constant and it should never be changes
 */
-static	VOID
+static	void
 phy_InitBBRFRegisterDefinition(
 	IN	struct adapter *	Adapter
 )
@@ -1014,7 +1014,7 @@ phy_ConfigBBWithParaFile(
 //****************************************
 // The following is for High Power PA
 //****************************************
-VOID
+void
 phy_ConfigBBExternalPA(
 	IN	struct adapter *		Adapter
 )
@@ -1167,7 +1167,7 @@ exit:
 }
 #endif //#ifndef CONFIG_PHY_SETTING_WITH_ODM
 
-VOID
+void
 storePwrIndexDiffRateOffset(
 	IN	struct adapter *Adapter,
 	IN	u32		RegAddr,
@@ -1360,7 +1360,7 @@ phy_ConfigBBWithPgHeaderFile(
 
 
 
-static VOID
+static void
 phy_BB8192C_Config_1T(
 	IN struct adapter *Adapter
 	)
@@ -1898,7 +1898,7 @@ PHY_CheckBBAndRFOK(
 }
 
 
-VOID
+void
 rtl8192c_PHY_GetHWRegOriginalValue(
 	IN	struct adapter *	Adapter
 	)
@@ -2035,7 +2035,7 @@ phy_TxPwrIdxToDbm(
  * Return:      NONE
  *
  *---------------------------------------------------------------------------*/
-VOID
+void
 PHY_GetTxPowerLevel8188E(
 	IN	struct adapter *	Adapter,
 	OUT u32*		powerlevel
@@ -2204,7 +2204,7 @@ void phy_PowerIndexCheck88E(
  *	2009/01/21	MHC		Support new EEPROM format from SD3 requirement.
  *
  *---------------------------------------------------------------------------*/
-VOID
+void
 PHY_SetTxPowerLevel8188E(
 	IN	struct adapter *	Adapter,
 	IN	u8				channel
@@ -2302,7 +2302,7 @@ rtl8192c_PHY_SetBeaconHwReg(
 }
 
 
-VOID
+void
 PHY_ScanOperationBackup8188E(
 	IN	struct adapter *Adapter,
 	IN	u8		Operation
@@ -2325,7 +2325,7 @@ PHY_ScanOperationBackup8188E(
  *			(2) Will two workitem of "switch channel" and "switch channel bandwidth" run
  *			     concurrently?
  *---------------------------------------------------------------------------*/
-static VOID
+static void
 _PHY_SetBWMode92C(
 	IN	struct adapter *Adapter
 )
@@ -2488,7 +2488,7 @@ _PHY_SetBWMode92C(
  *
  * Note:		We do not take j mode into consideration now
  *---------------------------------------------------------------------------*/
-VOID
+void
 PHY_SetBWMode8188E(
 	IN	struct adapter *				Adapter,
 	IN	HT_CHANNEL_WIDTH	Bandwidth,	// 20M or 40M
@@ -2582,7 +2582,7 @@ phy_SpurCalibration_8188E(
 	}
 
 }
-VOID
+void
 PHY_SwChnl8188E(	// Call after initialization
 	IN	struct adapter *Adapter,
 	IN	u8		channel
@@ -2735,7 +2735,7 @@ phy_FinishSwChnlNow(	// We should not call this function directly
 // However, this procedure is performed synchronously  which should be running under
 // passive level.
 //
-VOID
+void
 PHY_SwChnlPhy8192C(	// Only called during initialize
 	IN	struct adapter *Adapter,
 	IN	u8		channel
@@ -2781,7 +2781,7 @@ PHY_SwChnlPhy8192C(	// Only called during initialize
 //		Note, because we possibly need to configure BB and RF in this function,
 //		so caller should in PASSIVE_LEVEL. 080118, by rcnjko.
 //
-VOID
+void
 PHY_SetMonitorMode8192C(
 	IN	struct adapter *		pAdapter,
 	IN	BOOLEAN				bEnableMonitorMode
@@ -2819,7 +2819,7 @@ PHY_CheckIsLegalRfPath8192C(
 
 }	/* PHY_CheckIsLegalRfPath8192C */
 
-static VOID _PHY_SetRFPathSwitch(
+static void _PHY_SetRFPathSwitch(
 	IN	struct adapter *pAdapter,
 	IN	BOOLEAN		bMain,
 	IN	BOOLEAN		is2T
@@ -2886,7 +2886,7 @@ static BOOLEAN _PHY_QueryRFPathSwitch(
 }
 
 
-static VOID
+static void
 _PHY_DumpRFReg(IN	struct adapter *pAdapter)
 {
 	u32 rfRegValue,rfRegOffset;
@@ -2911,7 +2911,7 @@ _PHY_DumpRFReg(IN	struct adapter *pAdapter)
 //		To dump all Tx FIFO LLT related link-list table.
 //		Added by Roger, 2009.03.10.
 //
-VOID
+void
 DumpBBDbgPort_92CU(
 	IN	struct adapter *		Adapter
 	)