skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2025-06-23 16:44:20 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

rtl8188eu: Set load parameter debug for dynamic debugging

Browse source 
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
This commit is contained in:
Larry Finger 2013-05-17 16:52:06 -05:00
parent f8e677c4b4
commit 3ad757d04a
6 changed files with 103 additions and 765 deletions
Download patch file Download diff file Expand all files Collapse all files

40
hal/usb_halinit.c
View file

@ -2030,7 +2030,6 @@ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
//tynli_test_tx_report.
rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
//RT_TRACE(COMP_INIT, DBG_TRACE, ("InitializeAdapter8188EUsb() <====\n"));
//enable tx DMA to drop the redundate data of packet
rtw_write16(Adapter,REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter,REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN));
@ -2113,7 +2112,7 @@ CardDisableRTL8188EU(
u32 val32;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
RT_TRACE(COMP_INIT, DBG_LOUD, ("CardDisableRTL8188EU\n"));
RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("CardDisableRTL8188EU\n"));
//Stop Tx Report Timer. 0x4EC[Bit1]=b'0
val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
@ -2127,25 +2126,16 @@ CardDisableRTL8188EU(
// 2. 0x1F[7:0] = 0 // turn off RF
//rtw_write8(Adapter, REG_RF_CTRL, 0x00);
val8 = rtw_read8(Adapter, REG_MCUFWDL);
if ((val8 & RAM_DL_SEL) && Adapter->bFWReady) //8051 RAM code
{
//rtl8723a_FirmwareSelfReset(padapter);
//_8051Reset88E(padapter);
// Reset MCU 0x2[10]=0.
val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
val8 &= ~BIT(2); // 0x2[10], FEN_CPUEN
rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
}
//val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
//val8 &= ~BIT(2); // 0x2[10], FEN_CPUEN
//rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
// MCUFWDL 0x80[1:0]=0
// reset MCU ready status
rtw_write8(Adapter, REG_MCUFWDL, 0);
@ -2163,23 +2153,16 @@ CardDisableRTL8188EU(
val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
#if 0
// 7. RSV_CTRL 0x1C[7:0] = 0x0E // lock ISO/CLK/Power control register
rtw_write8(Adapter, REG_RSV_CTRL, 0x0e);
#endif
#if 1
//YJ,test add, 111207. For Power Consumption.
val8 = rtw_read8(Adapter, GPIO_IN);
rtw_write8(Adapter, GPIO_OUT, val8);
rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);//Reg0x46
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
//rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4)|val8);
rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL+1);
rtw_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);//Reg0x43
rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);//set LNA ,TRSW,EX_PA Pin to output mode
#endif
pHalData->bMacPwrCtrlOn = _FALSE;
Adapter->bFWReady = _FALSE;
}
@ -2247,16 +2230,15 @@ _func_enter_;
status = _SUCCESS;
RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init\n"));
RT_TRACE(_module_hci_hal_init_c_, _drv_info_,
("===> usb_inirp_init\n"));
precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR;
//issue Rx irp to receive data
precvbuf = (struct recv_buf *)precvpriv->precv_buf;
for (i=0; i<NR_RECVBUFF; i++)
{
if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE )
{
for (i = 0; i < NR_RECVBUFF; i++) {
if (_read_port(pintfhdl, precvpriv->ff_hwaddr, 0, (unsigned char *)precvbuf) == _FALSE ) {
RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error\n"));
status = _FAIL;
goto exit;
@ -2267,16 +2249,16 @@ _func_enter_;
}
#ifdef CONFIG_USB_INTERRUPT_IN_PIPE
if (pHalData->RtIntInPipe != 0x05)
{
if (pHalData->RtIntInPipe != 0x05) {
status = _FAIL;
DBG_871X("%s =>Warning !! Have not USB Int-IN pipe, pHalData->RtIntInPipe(%d)!!!\n",__func__,pHalData->RtIntInPipe);
DBG_871X("%s =>Warning !! Have not USB Int-IN pipe, pHalData->RtIntInPipe(%d)!!!\n",
__func__,i pHalData->RtIntInPipe);
goto exit;
}
_read_interrupt = pintfhdl->io_ops._read_interrupt;
if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE )
{
RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error\n"));
if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == _FALSE ) {
RT_TRACE(_module_hci_hal_init_c_, _drv_err_,
("usb_rx_init: usb_read_interrupt error\n"));
status = _FAIL;
}
#endif