rtl8188eu: Remove CONFIG_RF_GAIN_OFFSET - not defined

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>

Makefile

@@ -24,7 +24,6 @@ CONFIG_POWER_SAVING = y
 CONFIG_USB_AUTOSUSPEND = n
 CONFIG_HW_PWRP_DETECTION = n
 CONFIG_BT_COEXIST = n
-CONFIG_EFUSE_CONFIG_FILE = n
 CONFIG_EXT_CLK = n
 CONFIG_WOWLAN = n
 
@@ -113,10 +112,6 @@ ifeq ($(CONFIG_BT_COEXIST), y)
 EXTRA_CFLAGS += -DCONFIG_BT_COEXIST
 endif
 
-ifeq ($(CONFIG_EFUSE_CONFIG_FILE), y)
-EXTRA_CFLAGS += -DCONFIG_EFUSE_CONFIG_FILE
-endif
-
 ifeq ($(CONFIG_EXT_CLK), y)
 EXTRA_CFLAGS += -DCONFIG_EXT_CLK
 endif
@@ -125,10 +120,6 @@ ifeq ($(CONFIG_WOWLAN), y)
 EXTRA_CFLAGS += -DCONFIG_WOWLAN
 endif
 
-ifeq ($(CONFIG_EFUSE_CONFIG_FILE), y)
-EXTRA_CFLAGS += -DCONFIG_RF_GAIN_OFFSET
-endif
-
 SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ | sed -e s/ppc/powerpc/ | sed -e s/armv6l/arm/)
 
 ARCH ?= $(SUBARCH)

hal/rtl8188e_hal_init.c

@@ -3268,35 +3268,12 @@ void Hal_DetectWoWMode(PADAPTER pAdapter)
 }
 #endif
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-void Hal_ReadRFGainOffset(
-			PADAPTER		Adapter,
-			u8*				PROMContent,
-			bool			AutoloadFail)
-{
-	u8 buff[EFUSE_MAX_SIZE];
-	u32 res;
-	/*  */
-	/*  BB_RF Gain Offset from EEPROM */
-	/*  */
-	res = rtw_efuse_access(Adapter, false, 0, EFUSE_MAX_SIZE, buff);
-	if (!AutoloadFail && res != _FAIL)
-		Adapter->eeprompriv.EEPROMRFGainOffset = buff[EEPROM_RF_GAIN_OFFSET_88E];
-	else
-		Adapter->eeprompriv.EEPROMRFGainOffset = EEPROM_Default_RFGainOffset;
-	DBG_88E("EEPRORFGainOffset = 0x%02x\n", Adapter->eeprompriv.EEPROMRFGainOffset);
-}
-#endif /* CONFIG_RF_GAIN_OFFSET */
-
-/*  */
-/*  */
-/*  20100209 Joseph: */
 /*  This function is used only for 92C to set REG_BCN_CTRL(0x550) register. */
 /*  We just reserve the value of the register in variable pHalData->RegBcnCtrlVal and then operate */
 /*  the value of the register via atomic operation. */
 /*  This prevents from race condition when setting this register. */
 /*  The value of pHalData->RegBcnCtrlVal is initialized in HwConfigureRTL8192CE() function. */
-/*  */
+
 void SetBcnCtrlReg(
 	PADAPTER	padapter,
 	u8		SetBits,

include/osdep_intf.h

@@ -90,10 +90,6 @@ void rtw_proc_remove_one(struct net_device *dev);
 
 void rtw_ips_dev_unload(_adapter *padapter);
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-void rtw_bb_rf_gain_offset(_adapter *padapter);
-#endif //CONFIG_RF_GAIN_OFFSET
-
 int rtw_ips_pwr_up(_adapter *padapter);
 void rtw_ips_pwr_down(_adapter *padapter);
 int rtw_hw_suspend(_adapter *padapter );

include/rtl8188e_hal.h

@@ -522,15 +522,7 @@ bool HalDetectPwrDownMode88E(PADAPTER Adapter);
 void Hal_DetectWoWMode(PADAPTER pAdapter);
 #endif //CONFIG_WOWLAN
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-void Hal_ReadRFGainOffset(PADAPTER pAdapter,u8* hwinfo,bool AutoLoadFail);
-#endif //CONFIG_RF_GAIN_OFFSET
-
-//RT_CHANNEL_DOMAIN rtl8723a_HalMapChannelPlan(PADAPTER padapter, u8 HalChannelPlan);
-//VERSION_8192C rtl8723a_ReadChipVersion(PADAPTER padapter);
-//void rtl8723a_ReadBluetoothCoexistInfo(PADAPTER padapter, u8 *PROMContent, bool AutoloadFail);
 void Hal_InitChannelPlan(PADAPTER padapter);
-
 void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
 
 // register

include/rtl8188e_spec.h

@@ -1519,10 +1519,6 @@ Current IOREG MAP
 #define	EEPROM_CUSTOMERID_88E				0xC5
 #define	EEPROM_RF_ANTENNA_OPT_88E			0xC9
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-#define	EEPROM_RF_GAIN_OFFSET_88E			0xFD
-#endif //CONFIG_RF_GAIN_OFFSET
-
 // RTL88EE
 #define	EEPROM_MAC_ADDR_88EE				0xD0
 #define	EEPROM_VID_88EE						0xD6
@@ -1577,10 +1573,6 @@ Current IOREG MAP
 #define EEPROM_Default_CrystalCap_88E		0x20
 #define	EEPROM_Default_ThermalMeter_88E		0x18
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-#define EEPROM_Default_RFGainOffset			0xff
-#endif //CONFIG_RF_GAIN_OFFSET
-
 //New EFUSE deafult value
 #define		EEPROM_DEFAULT_24G_INDEX		0x2D
 #define		EEPROM_DEFAULT_24G_HT20_DIFF	0X02

include/rtw_eeprom.h

@@ -119,11 +119,7 @@ struct eeprom_priv {
 	u8		mac_addr[6];	//PermanentAddress
 	u16		channel_plan;
 	u8		EepromOrEfuse;
-	u8		efuse_eeprom_data[HWSET_MAX_SIZE_512]; //92C:256bytes, 88E:512bytes, we use union set (512bytes)
+	u8		efuse_eeprom_data[HWSET_MAX_SIZE_512];
-
-#ifdef CONFIG_RF_GAIN_OFFSET
-	u8		EEPROMRFGainOffset;
-#endif //CONFIG_RF_GAIN_OFFSET
 };
 
 extern void eeprom_write16(_adapter *padapter, u16 reg, u16 data);

os_dep/os_intfs.c

@@ -33,11 +33,6 @@
 #include <usb_hal.h>
 #include <rtw_br_ext.h>
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-#define		REG_RF_BB_GAIN_OFFSET	0x55
-#define		RF_GAIN_OFFSET_MASK		0xfffff
-#endif //CONFIG_RF_GAIN_OFFSET
-
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Realtek Wireless Lan Driver");
 MODULE_AUTHOR("Realtek Semiconductor Corp.");
@@ -1297,10 +1292,6 @@ int _netdev_open(struct net_device *pnetdev)
 
 		pr_info("MAC Address = %pM\n", pnetdev->dev_addr);
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-		rtw_bb_rf_gain_offset(padapter);
-#endif //CONFIG_RF_GAIN_OFFSET
-
 		status=rtw_start_drv_threads(padapter);
 		if (status ==_FAIL) {
 			pr_info("Initialize driver software resource Failed!\n");
@@ -1447,27 +1438,6 @@ void rtw_ips_dev_unload(_adapter *padapter)
 		rtw_hal_deinit(padapter);
 }
 
-#ifdef CONFIG_RF_GAIN_OFFSET
-void rtw_bb_rf_gain_offset(_adapter *padapter)
-{
-	u8      value = padapter->eeprompriv.EEPROMRFGainOffset;
-	u8      tmp = 0x3e;
-	u32     res;
-
-	DBG_88E("+%s value: 0x%02x+\n", __func__, value);
-
-	if (!(value & 0x01)) {
-		DBG_88E("Offset RF Gain.\n");
-		res = rtw_hal_read_rfreg(padapter, RF_PATH_A, REG_RF_BB_GAIN_OFFSET, 0xffffffff);
-		value &= tmp;
-		res = value << 14;
-		rtw_hal_write_rfreg(padapter, RF_PATH_A, REG_RF_BB_GAIN_OFFSET, RF_GAIN_OFFSET_MASK, res);
-	} else {
-		DBG_88E("Using the default RF gain.\n");
-	}
-}
-#endif //CONFIG_RF_GAIN_OFFSET
-
 int pm_netdev_open(struct net_device *pnetdev,u8 bnormal)
 {
 	int status;