rtl8188eu: Remove dead code associated with CONFIG_CONCURRENT snd CONFIG_DUALMAC_CONCURRENT

These two configuration parameters are only associated with the RTL8192DU
device, and can be removed here.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
This commit is contained in:
Larry Finger 2013-07-11 22:50:49 -05:00
parent e79535e153
commit 7c593a903d
30 changed files with 103 additions and 4328 deletions

View file

@ -1629,35 +1629,6 @@ static int rtw_wx_set_wap(struct net_device *dev,
NDIS_802_11_AUTHENTICATION_MODE authmode;
_func_enter_;
/*
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->iface_type > PRIMARY_IFACE)
{
ret = -EINVAL;
goto exit;
}
#endif
*/
#ifdef CONFIG_CONCURRENT_MODE
if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true)
{
DBG_88E("set bssid, but buddy_intf is under scanning or linking\n");
ret = -EINVAL;
goto exit;
}
#endif
#ifdef CONFIG_DUALMAC_CONCURRENT
if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== true)
{
DBG_88E("set bssid, but buddy_intf is under scanning or linking\n");
ret = -EINVAL;
goto exit;
}
#endif
if (_FAIL == rtw_pwr_wakeup(padapter))
{
@ -1810,15 +1781,6 @@ _func_enter_;
#ifdef DBG_IOCTL
DBG_88E("DBG_IOCTL %s:%d\n",__func__, __LINE__);
#endif
/*
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->iface_type > PRIMARY_IFACE)
{
ret = -1;
goto exit;
}
#endif
*/
#ifdef CONFIG_MP_INCLUDED
if (padapter->registrypriv.mp_mode == 1)
@ -1884,47 +1846,11 @@ if (padapter->registrypriv.mp_mode == 1)
}
#endif
#ifdef CONFIG_CONCURRENT_MODE
if (check_buddy_fwstate(padapter,
_FW_UNDER_SURVEY|_FW_UNDER_LINKING|WIFI_UNDER_WPS) == true)
{
if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY))
{
DBG_88E("scanning_via_buddy_intf\n");
pmlmepriv->scanning_via_buddy_intf = true;
}
indicate_wx_scan_complete_event(padapter);
goto exit;
}
#endif
#ifdef CONFIG_DUALMAC_CONCURRENT
if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== true)
{
indicate_wx_scan_complete_event(padapter);
goto exit;
}
#endif
// Mareded by Albert 20101103
// For the DMP WiFi Display project, the driver won't to scan because
// the pmlmepriv->scan_interval is always equal to 3.
// So, the wpa_supplicant won't find out the WPS SoftAP.
/*
if (pmlmepriv->scan_interval>10)
pmlmepriv->scan_interval = 0;
if (pmlmepriv->scan_interval > 0)
{
DBG_88E("scan done\n");
ret = 0;
goto exit;
}
*/
#ifdef CONFIG_P2P
if (pwdinfo->p2p_state != P2P_STATE_NONE)
{
@ -2067,10 +1993,6 @@ static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
u32 cnt=0;
u32 wait_for_surveydone;
sint wait_status;
#ifdef CONFIG_CONCURRENT_MODE
//PADAPTER pbuddy_adapter = padapter->pbuddy_adapter;
//struct mlme_priv *pbuddy_mlmepriv = &(pbuddy_adapter->mlmepriv);
#endif
#ifdef CONFIG_P2P
struct wifidirect_info* pwdinfo = &padapter->wdinfo;
#endif //CONFIG_P2P
@ -2083,15 +2005,6 @@ static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
DBG_88E("DBG_IOCTL %s:%d\n",__func__, __LINE__);
#endif
/*
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->iface_type > PRIMARY_IFACE)
{
ret = -EINVAL;
goto exit;
}
#endif
*/
if (padapter->pwrctrlpriv.brfoffbyhw && padapter->bDriverStopped)
{
ret = -EINVAL;
@ -2118,37 +2031,12 @@ static int rtw_wx_get_scan(struct net_device *dev, struct iw_request_info *a,
}
#endif //CONFIG_P2P
/*
#ifdef CONFIG_CONCURRENT_MODE
if (pmlmepriv->scanning_via_buddy_intf == true)
{
pmlmepriv->scanning_via_buddy_intf = false;//reset
// change pointers to buddy interface
padapter = pbuddy_adapter;
pmlmepriv = pbuddy_mlmepriv;
queue = &(pbuddy_mlmepriv->scanned_queue);
}
#endif // CONFIG_CONCURRENT_MODE
*/
wait_status = _FW_UNDER_SURVEY
#ifndef CONFIG_ANDROID
|_FW_UNDER_LINKING
#endif
;
#ifdef CONFIG_DUALMAC_CONCURRENT
while (dc_check_fwstate(padapter, wait_status)== true)
{
rtw_msleep_os(30);
cnt++;
if (cnt > wait_for_surveydone)
break;
}
#endif // CONFIG_DUALMAC_CONCURRENT
while (check_fwstate(pmlmepriv, wait_status) == true)
{
rtw_msleep_os(30);
@ -2234,36 +2122,6 @@ static int rtw_wx_set_essid(struct net_device *dev,
DBG_88E("DBG_IOCTL %s:%d\n",__func__, __LINE__);
#endif
/*
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->iface_type > PRIMARY_IFACE)
{
ret = -EINVAL;
goto exit;
}
#endif
*/
#ifdef CONFIG_CONCURRENT_MODE
if (check_buddy_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING) == true)
{
DBG_88E("set ssid, but buddy_intf is under scanning or linking\n");
ret = -EINVAL;
goto exit;
}
#endif
#ifdef CONFIG_DUALMAC_CONCURRENT
if (dc_check_fwstate(padapter, _FW_UNDER_SURVEY|_FW_UNDER_LINKING)== true)
{
DBG_88E("set bssid, but buddy_intf is under scanning or linking\n");
ret = -EINVAL;
goto exit;
}
#endif
RT_TRACE(_module_rtl871x_ioctl_os_c, _drv_info_,
("+rtw_wx_set_essid: fw_state=0x%08x\n", get_fwstate(pmlmepriv)));
if (_FAIL == rtw_pwr_wakeup(padapter))
@ -3916,33 +3774,7 @@ static int rtw_wext_p2p_enable(struct net_device *dev,
pwdinfo->operating_channel = pwdinfo->listen_channel;
ch_offset = HAL_PRIME_CHNL_OFFSET_DONT_CARE;
bwmode = HT_CHANNEL_WIDTH_20;
}
#ifdef CONFIG_CONCURRENT_MODE
else if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_IDLE))
{
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
//struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
_set_timer(&pwdinfo->ap_p2p_switch_timer, pwdinfo->ext_listen_interval);
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
pwdinfo->operating_channel = pbuddy_mlmeext->cur_channel;
// How about the ch_offset and bwmode ??
}
else
{
pwdinfo->operating_channel = pwdinfo->listen_channel;
}
channel = pbuddy_mlmeext->cur_channel;
ch_offset = pbuddy_mlmeext->cur_ch_offset;
bwmode = pbuddy_mlmeext->cur_bwmode;
}
#endif
else
{
} else {
pwdinfo->operating_channel = pmlmeext->cur_channel;
channel = pwdinfo->operating_channel;
@ -3955,7 +3787,6 @@ static int rtw_wext_p2p_enable(struct net_device *dev,
exit:
return ret;
}
static int rtw_p2p_set_go_nego_ssid(struct net_device *dev,
@ -4186,12 +4017,6 @@ static int rtw_p2p_get_status(struct net_device *dev,
_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);
struct iw_point *pdata = &wrqu->data;
struct wifidirect_info *pwdinfo = &(padapter->wdinfo);
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct wifidirect_info *pbuddy_wdinfo = &pbuddy_adapter->wdinfo;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif
if (padapter->bShowGetP2PState)
{
@ -4911,11 +4736,6 @@ static int rtw_p2p_connect(struct net_device *dev,
_queue *queue = &(pmlmepriv->scanned_queue);
struct wlan_network *pnetwork = NULL;
uint uintPeerChannel = 0;
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif // CONFIG_CONCURRENT_MODE
// Commented by Albert 20110304
// The input data contains two informations.
@ -4967,13 +4787,6 @@ static int rtw_p2p_connect(struct net_device *dev,
if (uintPeerChannel)
{
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_cancel_timer_ex(&pwdinfo->ap_p2p_switch_timer);
}
#endif // CONFIG_CONCURRENT_MODE
_rtw_memset(&pwdinfo->nego_req_info, 0x00, sizeof(struct tx_nego_req_info));
_rtw_memset(&pwdinfo->groupid_info, 0x00, sizeof(struct group_id_info));
@ -4991,31 +4804,9 @@ static int rtw_p2p_connect(struct net_device *dev,
rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
rtw_p2p_set_state(pwdinfo, P2P_STATE_GONEGO_ING);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
// Have to enter the power saving with the AP
set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
}
#endif // CONFIG_CONCURRENT_MODE
DBG_88E("[%s] Start PreTx Procedure!\n", __func__);
_set_timer(&pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_GO_NEGO_TIMEOUT);
}
else
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT);
}
#else
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_GO_NEGO_TIMEOUT);
#endif // CONFIG_CONCURRENT_MODE
}
else
{
@ -5047,11 +4838,6 @@ static int rtw_p2p_invite_req(struct net_device *dev,
uint p2pielen = 0, attr_contentlen = 0;
_irqL irqL;
struct tx_invite_req_info* pinvite_req_info = &pwdinfo->invitereq_info;
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif // CONFIG_CONCURRENT_MODE
#ifdef CONFIG_WFD
struct wifi_display_info* pwfd_info = pwdinfo->wfd_info;
@ -5183,13 +4969,6 @@ static int rtw_p2p_invite_req(struct net_device *dev,
if (uintPeerChannel)
{
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_cancel_timer_ex(&pwdinfo->ap_p2p_switch_timer);
}
#endif // CONFIG_CONCURRENT_MODE
// Store the GO's bssid
for (jj = 0, kk = 18; jj < ETH_ALEN; jj++, kk += 3)
{
@ -5205,38 +4984,11 @@ static int rtw_p2p_invite_req(struct net_device *dev,
rtw_p2p_set_pre_state(pwdinfo, rtw_p2p_state(pwdinfo));
rtw_p2p_set_state(pwdinfo, P2P_STATE_TX_INVITE_REQ);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
// Have to enter the power saving with the AP
set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
}
else
{
set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
}
#else
set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
#endif
_set_timer(&pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_INVITE_TIMEOUT);
}
else
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT);
}
#else
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_INVITE_TIMEOUT);
#endif // CONFIG_CONCURRENT_MODE
}
else
{
@ -5269,11 +5021,6 @@ static int rtw_p2p_set_persistent(struct net_device *dev,
uint p2pielen = 0, attr_contentlen = 0;
_irqL irqL;
struct tx_invite_req_info* pinvite_req_info = &pwdinfo->invitereq_info;
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif // CONFIG_CONCURRENT_MODE
#ifdef CONFIG_WFD
struct wifi_display_info* pwfd_info = pwdinfo->wfd_info;
@ -5336,10 +5083,6 @@ static int rtw_p2p_set_pc(struct net_device *dev,
uint p2pielen = 0, attr_contentlen = 0;
_irqL irqL;
uint uintPeerChannel = 0;
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif // CONFIG_CONCURRENT_MODE
struct wifi_display_info* pwfd_info = pwdinfo->wfd_info;
// Commented by Albert 20120512
@ -5590,11 +5333,6 @@ static int rtw_p2p_prov_disc(struct net_device *dev,
u8 *p2pie;
uint p2pielen = 0, attr_contentlen = 0;
_irqL irqL;
#ifdef CONFIG_CONCURRENT_MODE
_adapter *pbuddy_adapter = padapter->pbuddy_adapter;
struct mlme_priv *pbuddy_mlmepriv = &pbuddy_adapter->mlmepriv;
struct mlme_ext_priv *pbuddy_mlmeext = &pbuddy_adapter->mlmeextpriv;
#endif // CONFIG_CONCURRENT_MODE
#ifdef CONFIG_WFD
struct wifi_display_info* pwfd_info = pwdinfo->wfd_info;
#endif // CONFIG_WFD
@ -5752,12 +5490,6 @@ static int rtw_p2p_prov_disc(struct net_device *dev,
{
DBG_88E("[%s] peer channel: %d!\n", __func__, uintPeerChannel);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_cancel_timer_ex(&pwdinfo->ap_p2p_switch_timer);
}
#endif // CONFIG_CONCURRENT_MODE
_rtw_memcpy(pwdinfo->tx_prov_disc_info.peerIFAddr, pnetwork->network.MacAddress, ETH_ALEN);
_rtw_memcpy(pwdinfo->tx_prov_disc_info.peerDevAddr, peerMAC, ETH_ALEN);
pwdinfo->tx_prov_disc_info.peer_channel_num[0] = (u16) uintPeerChannel;
@ -5775,37 +5507,11 @@ static int rtw_p2p_prov_disc(struct net_device *dev,
pwdinfo->tx_prov_disc_info.ssid.SsidLength= P2P_WILDCARD_SSID_LEN;
}
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
// Have to enter the power saving with the AP
set_channel_bwmode(padapter, pbuddy_mlmeext->cur_channel, pbuddy_mlmeext->cur_ch_offset, pbuddy_mlmeext->cur_bwmode);
issue_nulldata(pbuddy_adapter, NULL, 1, 3, 500);
}
else
{
set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
}
#else
set_channel_bwmode(padapter, uintPeerChannel, HAL_PRIME_CHNL_OFFSET_DONT_CARE, HT_CHANNEL_WIDTH_20);
#endif
_set_timer(&pwdinfo->pre_tx_scan_timer, P2P_TX_PRESCAN_TIMEOUT);
#ifdef CONFIG_CONCURRENT_MODE
if (check_fwstate(pbuddy_mlmepriv, _FW_LINKED))
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_CONCURRENT_PROVISION_TIMEOUT);
}
else
{
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT);
}
#else
_set_timer(&pwdinfo->restore_p2p_state_timer, P2P_PROVISION_TIMEOUT);
#endif // CONFIG_CONCURRENT_MODE
}
else
{
@ -6112,11 +5818,6 @@ static int rtw_rereg_nd_name(struct net_device *dev,
if (rereg_priv->old_ifname[0] == 0) {
char *reg_ifname;
#ifdef CONFIG_CONCURRENT_MODE
if (padapter->isprimary)
reg_ifname = padapter->registrypriv.ifname;
else
#endif
reg_ifname = padapter->registrypriv.if2name;
strncpy(rereg_priv->old_ifname, reg_ifname, IFNAMSIZ);