/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __RTL8188E_HAL_H__ #define __RTL8188E_HAL_H__ //include HAL Related header after HAL Related compiling flags #include "rtl8188e_spec.h" #include "Hal8188EPhyReg.h" #include "Hal8188EPhyCfg.h" #include "rtl8188e_rf.h" #include "rtl8188e_dm.h" #include "rtl8188e_recv.h" #include "rtl8188e_xmit.h" #include "rtl8188e_cmd.h" #include "Hal8188EPwrSeq.h" #ifdef DBG_CONFIG_ERROR_DETECT #include "rtl8188e_sreset.h" #endif #include "rtw_efuse.h" #include "../hal/odm_precomp.h" // Fw Array #define Rtl8188E_FwImageArray Rtl8188EFwImgArray #define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength #ifdef CONFIG_WOWLAN #define Rtl8188E_FwWoWImageArray Array_8188E_FW_WoWLAN #define Rtl8188E_FwWoWImgArrayLength ArrayLength_8188E_FW_WoWLAN #endif //CONFIG_WOWLAN #define RTL8188E_FW_UMC_IMG "rtl8188E\\rtl8188efw.bin" #define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt" #define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt" #define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt" #define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt" #define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt" #define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt" #define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt" //--------------------------------------------------------------------- // RTL8188E Power Configuration CMDs for USB/SDIO interfaces //--------------------------------------------------------------------- #define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow #define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow #define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow #define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow #define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow #define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow #define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow #define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow #define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow #define DRVINFO_SZ 4 // unit is 8bytes #define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0)) #if 1 // download firmware related data structure #define FW_8188E_SIZE 0x4000 //16384,16k #define FW_8188E_START_ADDRESS 0x1000 #define FW_8188E_END_ADDRESS 0x1FFF //0x5FFF #define MAX_PAGE_SIZE 4096 // @ page : 4k bytes #define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 ||\ (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0) typedef enum _FIRMWARE_SOURCE { FW_SOURCE_IMG_FILE = 0, FW_SOURCE_HEADER_FILE = 1, //from header file } FIRMWARE_SOURCE, *PFIRMWARE_SOURCE; typedef struct _RT_FIRMWARE { FIRMWARE_SOURCE eFWSource; #ifdef CONFIG_EMBEDDED_FWIMG u8* szFwBuffer; #else u8 szFwBuffer[FW_8188E_SIZE]; #endif u32 ulFwLength; #ifdef CONFIG_WOWLAN u8* szWoWLANFwBuffer; u32 ulWoWLANFwLength; #endif //CONFIG_WOWLAN } RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_8188E, *PRT_FIRMWARE_8188E; // // This structure must be cared byte-ordering // typedef struct _RT_8188E_FIRMWARE_HDR { // 8-byte alinment required //--- LONG WORD 0 ---- u16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut u8 Category; // AP/NIC and USB/PCI u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions u16 Version; // FW Version u8 Subversion; // FW Subversion, default 0x00 u16 Rsvd1; //--- LONG WORD 1 ---- u8 Month; // Release time Month field u8 Date; // Release time Date field u8 Hour; // Release time Hour field u8 Minute; // Release time Minute field u16 RamCodeSize; // The size of RAM code u8 Foundry; u8 Rsvd2; //--- LONG WORD 2 ---- u32 SvnIdx; // The SVN entry index u32 Rsvd3; //--- LONG WORD 3 ---- u32 Rsvd4; u32 Rsvd5; }RT_8188E_FIRMWARE_HDR, *PRT_8188E_FIRMWARE_HDR; #endif // download firmware related data structure #define DRIVER_EARLY_INT_TIME 0x05 #define BCN_DMA_ATIME_INT_TIME 0x02 #ifdef CONFIG_USB_RX_AGGREGATION typedef enum _USB_RX_AGG_MODE{ USB_RX_AGG_DISABLE, USB_RX_AGG_DMA, USB_RX_AGG_USB, USB_RX_AGG_MIX }USB_RX_AGG_MODE; //#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer #endif #define MAX_RX_DMA_BUFFER_SIZE_88E 0x2400 //9k for 88E nornal chip , //MaxRxBuff=10k-max(TxReportSize(64*8), WOLPattern(16*24)) #define MAX_TX_REPORT_BUFFER_SIZE 0x0400 // 1k // BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. #define MAX_TX_QUEUE 9 #define TX_SELE_HQ BIT(0) // High Queue #define TX_SELE_LQ BIT(1) // Low Queue #define TX_SELE_NQ BIT(2) // Normal Queue // Note: We will divide number of page equally for each queue other than public queue! // 22k = 22528 bytes = 176 pages (@page = 128 bytes) // must reserved about 7 pages for LPS => 176-7 = 169 (0xA9) // 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS null-data #define TX_TOTAL_PAGE_NUMBER_88E 0xA9// 169 (21632=> 21k) #ifdef RTL8188ES_MAC_LOOPBACK #define TX_PAGE_BOUNDARY_88E 0x48 //72 #else //TX_PAGE_BOUNDARY_LOOPBACK_MODE #define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1) #endif //Note: For Normal Chip Setting ,modify later #define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER TX_TOTAL_PAGE_NUMBER_88E //0xA9 , 0xb0=>176=>22k #define WMM_NORMAL_TX_PAGE_BOUNDARY_88E (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) //0xA9 //------------------------------------------------------------------------- // Chip specific //------------------------------------------------------------------------- #define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3) #define CHIP_BONDING_92C_1T2R 0x1 #define CHIP_BONDING_88C_USB_MCARD 0x2 #define CHIP_BONDING_88C_USB_HP 0x1 #include "HalVerDef.h" #include "hal_com.h" //------------------------------------------------------------------------- // Channel Plan //------------------------------------------------------------------------- enum ChannelPlan { CHPL_FCC = 0, CHPL_IC = 1, CHPL_ETSI = 2, CHPL_SPAIN = 3, CHPL_FRANCE = 4, CHPL_MKK = 5, CHPL_MKK1 = 6, CHPL_ISRAEL = 7, CHPL_TELEC = 8, CHPL_GLOBAL = 9, CHPL_WORLD = 10, }; typedef struct _TxPowerInfo { u8 CCKIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 HT40_1SIndex[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 HT40_2SIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 HT20IndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 OFDMIndexDiff[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 HT40MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 HT20MaxOffset[RF_PATH_MAX][CHANNEL_GROUP_MAX_88E]; u8 TSSI_A[3]; u8 TSSI_B[3]; u8 TSSI_A_5G[3]; //5GL/5GM/5GH u8 TSSI_B_5G[3]; } TxPowerInfo, *PTxPowerInfo; typedef struct _TxPowerInfo24G{ u8 IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G]; u8 IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G-1]; //If only one tx, only BW20 and OFDM are used. s8 CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT]; }TxPowerInfo24G, *PTxPowerInfo24G; #define EFUSE_REAL_CONTENT_LEN 512 #define EFUSE_MAP_LEN 128 #define EFUSE_MAX_SECTION 16 #define EFUSE_IC_ID_OFFSET 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. #define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN) // // // To prevent out of boundary programming case, // leave 1byte and program full section // 9bytes + 1byt + 5bytes and pre 1byte. // For worst case: // | 1byte|----8bytes----|1byte|--5bytes--| // | | Reserved(14bytes) | // #define EFUSE_OOB_PROTECT_BYTES 15 // PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte. #define HWSET_MAX_SIZE_88E 512 #define EFUSE_REAL_CONTENT_LEN_88E 256 #define EFUSE_MAP_LEN_88E 512 #define EFUSE_MAX_SECTION_88E 64 #define EFUSE_MAX_WORD_UNIT_88E 4 #define EFUSE_IC_ID_OFFSET_88E 506 //For some inferiority IC purpose. added by Roger, 2009.09.02. #define AVAILABLE_EFUSE_ADDR_88E(addr) (addr < EFUSE_REAL_CONTENT_LEN_88E) // To prevent out of boundary programming case, leave 1byte and program full section // 9bytes + 1byt + 5bytes and pre 1byte. // For worst case: // | 2byte|----8bytes----|1byte|--7bytes--| //92D #define EFUSE_OOB_PROTECT_BYTES_88E 18 // PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte. #define EFUSE_PROTECT_BYTES_BANK_88E 16 //======================================================== // EFUSE for BT definition //======================================================== #define EFUSE_BT_REAL_CONTENT_LEN 1536 // 512*3 #define EFUSE_BT_MAP_LEN 1024 // 1k bytes #define EFUSE_BT_MAX_SECTION 128 // 1024/8 #define EFUSE_PROTECT_BYTES_BANK 16 // // For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. // typedef enum _RT_MULTI_FUNC { RT_MULTI_FUNC_NONE = 0x00, RT_MULTI_FUNC_WIFI = 0x01, RT_MULTI_FUNC_BT = 0x02, RT_MULTI_FUNC_GPS = 0x04, } RT_MULTI_FUNC, *PRT_MULTI_FUNC; // // For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. // typedef enum _RT_POLARITY_CTL { RT_POLARITY_LOW_ACT = 0, RT_POLARITY_HIGH_ACT = 1, } RT_POLARITY_CTL, *PRT_POLARITY_CTL; // For RTL8723 regulator mode. by tynli. 2011.01.14. typedef enum _RT_REGULATOR_MODE { RT_SWITCHING_REGULATOR = 0, RT_LDO_REGULATOR = 1, } RT_REGULATOR_MODE, *PRT_REGULATOR_MODE; typedef struct hal_data_8188e { HAL_VERSION VersionID; RT_MULTI_FUNC MultiFunc; // For multi-function consideration. RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control. RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO u16 CustomerID; u16 FirmwareVersion; u16 FirmwareVersionRev; u16 FirmwareSubVersion; u16 FirmwareSignature; u8 PGMaxGroup; //current WIFI_PHY values u32 ReceiveConfig; WIRELESS_MODE CurrentWirelessMode; HT_CHANNEL_WIDTH CurrentChannelBW; u8 CurrentChannel; u8 nCur40MhzPrimeSC;// Control channel sub-carrier u16 BasicRateSet; //rf_ctrl u8 rf_chip; u8 rf_type; u8 NumTotalRFPath; u8 BoardType; // // EEPROM setting. // u16 EEPROMVID; u16 EEPROMPID; u16 EEPROMSVID; u16 EEPROMSDID; u8 EEPROMCustomerID; u8 EEPROMSubCustomerID; u8 EEPROMVersion; u8 EEPROMRegulatory; u8 bTXPowerDataReadFromEEPORM; u8 EEPROMThermalMeter; u8 bAPKThermalMeterIgnore; BOOLEAN EepromOrEfuse; u8 EfuseMap[2][HWSET_MAX_SIZE_512]; //92C:256bytes, 88E:512bytes, we use union set (512bytes) u8 EfuseUsedPercentage; EFUSE_HAL EfuseHal; //u8 bIQKInitialized; u8 Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER]; u8 Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER]; //If only one tx, only BW20 and OFDM are used. s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT]; u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff // For power group u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff // The current Tx Power Level u8 CurrentCckTxPwrIdx; u8 CurrentOfdm24GTxPwrIdx; u8 CurrentBW2024GTxPwrIdx; u8 CurrentBW4024GTxPwrIdx; // Read/write are allow for following hardware information variables u8 framesync; u32 framesyncC34; u8 framesyncMonitor; u8 DefaultInitialGain[4]; u8 pwrGroupCnt; u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16]; u32 CCKTxPowerLevelOriginalOffset; u8 CrystalCap; u32 AntennaTxPath; // Antenna path Tx u32 AntennaRxPath; // Antenna path Rx u8 BluetoothCoexist; u8 ExternalPA; u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. //u32 LedControlNum; //u32 LedControlMode; //u32 TxPowerTrackControl; u8 b1x1RecvCombine; // for 1T1R receive combining //u8 bCurrentTurboEDCA; u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo. BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D u32 RfRegChnlVal[2]; //RDG enable BOOLEAN bRDGEnable; //for host message to fw u8 LastHMEBoxNum; u8 fw_ractrl; u8 RegTxPause; // Beacon function related global variable. u32 RegBcnCtrlVal; u8 RegFwHwTxQCtrl; u8 RegReg542; u8 RegCR_1; struct dm_priv dmpriv; DM_ODM_T odmpriv; //_lock odm_stainfo_lock; #ifdef DBG_CONFIG_ERROR_DETECT struct sreset_priv srestpriv; #endif #ifdef CONFIG_BT_COEXIST struct btcoexist_priv bt_coexist; #endif u8 CurAntenna; u8 AntDivCfg; u8 TRxAntDivType; u8 bDumpRxPkt;//for debug u8 bDumpTxPkt;//for debug u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. // 2010/08/09 MH Add CU power down mode. BOOLEAN pwrdown; // Add for dual MAC 0--Mac0 1--Mac1 u32 interfaceIndex; u8 OutEpQueueSel; u8 OutEpNumber; // 2010/12/10 MH Add for USB aggreation mode dynamic shceme. BOOLEAN UsbRxHighSpeedMode; // 2010/11/22 MH Add for slim combo debug mode selective. // This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock. BOOLEAN SlimComboDbg; u16 EfuseUsedBytes; #ifdef CONFIG_P2P struct P2P_PS_Offload_t p2p_ps_offload; #endif // Auto FSM to Turn On, include clock, isolation, power control for MAC only u8 bMacPwrCtrlOn; u32 UsbBulkOutSize; // Interrupt relatd register information. u32 IntArray[3];//HISR0,HISR1,HSISR u32 IntrMask[3]; u8 C2hArray[16]; #ifdef CONFIG_USB_TX_AGGREGATION u8 UsbTxAggMode; u8 UsbTxAggDescNum; #endif #ifdef CONFIG_USB_RX_AGGREGATION u16 HwRxPageSize; // Hardware setting u32 MaxUsbRxAggBlock; USB_RX_AGG_MODE UsbRxAggMode; u8 UsbRxAggBlockCount; // USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed u8 UsbRxAggBlockTimeout; u8 UsbRxAggPageCount; // 8192C DMA page count u8 UsbRxAggPageTimeout; #endif #ifdef CONFIG_TX_EARLY_MODE u8 bEarlyModeEnable; #endif } HAL_DATA_8188E, *PHAL_DATA_8188E; typedef struct hal_data_8188e HAL_DATA_TYPE, *PHAL_DATA_TYPE; #define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData)) #define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type) #define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT) #define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS) // rtl8188e_hal_init.c #ifdef CONFIG_WOWLAN s32 rtl8188e_FirmwareDownload(struct adapter *padapter, BOOLEAN bUsedWoWLANFw); #else s32 rtl8188e_FirmwareDownload(struct adapter *padapter); #endif void _8051Reset88E(struct adapter *padapter); void rtl8188e_InitializeFirmwareVars(struct adapter *padapter); s32 InitLLTTable(struct adapter *padapter, u8 txpktbuf_bndy); void Read_LLT_Tab(struct adapter *padapter); // EFuse u8 GetEEPROMSize8188E(struct adapter *padapter); void Hal_InitPGData88E(struct adapter *padapter); void Hal_EfuseParseIDCode88E(struct adapter *padapter, u8 *hwinfo); void Hal_ReadTxPowerInfo88E(struct adapter *padapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_EfuseParseEEPROMVer88E(struct adapter *padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void rtl8188e_EfuseParseChnlPlan(struct adapter *padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_EfuseParseCustomerID88E(struct adapter *padapter, u8 *hwinfo, BOOLEAN AutoLoadFail); void Hal_ReadAntennaDiversity88E (struct adapter *pAdapter,u8*PROMContent,BOOLEAN AutoLoadFail); void Hal_ReadThermalMeter_88E(struct adapter *Adapter,u8* PROMContent,BOOLEAN AutoloadFail); void Hal_EfuseParseXtal_8188E(struct adapter *pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_EfuseParseBoardType88E(struct adapter *pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); void Hal_ReadPowerSavingMode88E(struct adapter *pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); BOOLEAN HalDetectPwrDownMode88E(struct adapter *Adapter); #ifdef CONFIG_WOWLAN void Hal_DetectWoWMode(struct adapter *pAdapter); #endif //CONFIG_WOWLAN #ifdef CONFIG_RF_GAIN_OFFSET void Hal_ReadRFGainOffset(struct adapter *pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail); #endif //CONFIG_RF_GAIN_OFFSET //RT_CHANNEL_DOMAIN rtl8723a_HalMapChannelPlan(struct adapter *padapter, u8 HalChannelPlan); //VERSION_8192C rtl8723a_ReadChipVersion(struct adapter *padapter); //void rtl8723a_ReadBluetoothCoexistInfo(struct adapter *padapter, u8 *PROMContent, BOOLEAN AutoloadFail); void Hal_InitChannelPlan(struct adapter *padapter); void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc); // register void SetBcnCtrlReg(struct adapter *padapter, u8 SetBits, u8 ClearBits); void rtl8188e_start_thread(struct adapter *padapter); void rtl8188e_stop_thread(struct adapter *padapter); void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter,int data_len); #ifdef CONFIG_IOL_EFUSE_PATCH s32 rtl8188e_iol_efuse_patch(struct adapter *padapter); #endif//CONFIG_IOL_EFUSE_PATCH #endif //__RTL8188E_HAL_H__