/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTW_BT_MP_H
#define __RTW_BT_MP_H
#include <osdep_service.h>
#include <drv_types.h>
#include <rtw_mp.h>
#if (MP_DRIVER == 1)
#pragma pack(1)
// definition for BT_UP_OP_BT_READY
#define MP_BT_NOT_READY 0
#define MP_BT_READY 1
// definition for BT_UP_OP_BT_SET_MODE
typedef enum _MP_BT_MODE{
MP_BT_MODE_RF_TXRX_TEST_MODE = 0,
MP_BT_MODE_BT20_DUT_TEST_MODE = 1,
MP_BT_MODE_BT40_DIRECT_TEST_MODE = 2,
MP_BT_MODE_CONNECT_TEST_MODE = 3,
MP_BT_MODE_MAX
}MP_BT_MODE,*PMP_BT_MODE;
// definition for BT_UP_OP_BT_SET_TX_RX_PARAMETER
typedef struct _BT_TXRX_PARAMETERS{
u1Byte txrxChannel;
u4Byte txrxTxPktCnt;
u1Byte txrxTxPktInterval;
u1Byte txrxPayloadType;
u1Byte txrxPktType;
u2Byte txrxPayloadLen;
u4Byte txrxPktHeader;
u1Byte txrxWhitenCoeff;
u1Byte txrxBdaddr[6];
u1Byte txrxTxGainIndex;
} BT_TXRX_PARAMETERS, *PBT_TXRX_PARAMETERS;
// txrxPktType
typedef enum _MP_BT_PKT_TYPE{
MP_BT_PKT_DH1 = 0,
MP_BT_PKT_DH3 = 1,
MP_BT_PKT_DH5 = 2,
MP_BT_PKT_2DH1 = 3,
MP_BT_PKT_2DH3 = 4,
MP_BT_PKT_2DH5 = 5,
MP_BT_PKT_3DH1 = 6,
MP_BT_PKT_3DH3 = 7,
MP_BT_PKT_3DH5 = 8,
MP_BT_PKT_LE = 9,
MP_BT_PKT_MAX
}MP_BT_PKT_TYPE,*PMP_BT_PKT_TYPE;
// txrxPayloadType
typedef enum _MP_BT_PAYLOAD_TYPE{
MP_BT_PAYLOAD_01010101 = 0,
MP_BT_PAYLOAD_ALL_1 = 1,
MP_BT_PAYLOAD_ALL_0 = 2,
MP_BT_PAYLOAD_11110000 = 3,
MP_BT_PAYLOAD_PRBS9 = 4,
MP_BT_PAYLOAD_MAX
}MP_BT_PAYLOAD_TYPE,*PMP_BT_PAYLOAD_TYPE;
// definition for BT_UP_OP_BT_TEST_CTRL
typedef enum _MP_BT_TEST_CTRL{
MP_BT_TEST_STOP_ALL_TESTS = 0,
MP_BT_TEST_START_RX_TEST = 1,
MP_BT_TEST_START_PACKET_TX_TEST = 2,
MP_BT_TEST_START_CONTINUOUS_TX_TEST = 3,
MP_BT_TEST_START_INQUIRY_SCAN_TEST = 4,
MP_BT_TEST_START_PAGE_SCAN_TEST = 5,
MP_BT_TEST_START_INQUIRY_PAGE_SCAN_TEST = 6,
MP_BT_TEST_START_LEGACY_CONNECT_TEST = 7,
MP_BT_TEST_START_LE_CONNECT_TEST_INITIATOR = 8,
MP_BT_TEST_START_LE_CONNECT_TEST_ADVERTISER = 9,
MP_BT_TEST_MAX
}MP_BT_TEST_CTRL,*PMP_BT_TEST_CTRL;
typedef enum _RTL_EXT_C2H_EVT
{
EXT_C2H_WIFI_FW_ACTIVE_RSP = 0,
EXT_C2H_TRIG_BY_BT_FW = 1,
MAX_EXT_C2HEVENT
}RTL_EXT_C2H_EVT;
// return status definition to the user layer
typedef enum _BT_CTRL_STATUS{
BT_STATUS_SUCCESS = 0x00, // Success
BT_STATUS_BT_OP_SUCCESS = 0x01, // bt fw op execution success
BT_STATUS_H2C_SUCCESS = 0x02, // H2c success
BT_STATUS_H2C_TIMT = 0x03, // H2c timeout
BT_STATUS_H2C_BT_NO_RSP = 0x04, // H2c sent, bt no rsp
BT_STATUS_C2H_SUCCESS = 0x05, // C2h success
BT_STATUS_C2H_REQNUM_MISMATCH = 0x06, // bt fw wrong rsp
BT_STATUS_OPCODE_U_VERSION_MISMATCH = 0x07, // Upper layer OP code version mismatch.
BT_STATUS_OPCODE_L_VERSION_MISMATCH = 0x08, // Lower layer OP code version mismatch.
BT_STATUS_UNKNOWN_OPCODE_U = 0x09, // Unknown Upper layer OP code
BT_STATUS_UNKNOWN_OPCODE_L = 0x0a, // Unknown Lower layer OP code
BT_STATUS_PARAMETER_FORMAT_ERROR_U = 0x0b, // Wrong parameters sent by upper layer.
BT_STATUS_PARAMETER_FORMAT_ERROR_L = 0x0c, // bt fw parameter format is not consistency
BT_STATUS_PARAMETER_OUT_OF_RANGE_U = 0x0d, // uppery layer parameter value is out of range
BT_STATUS_PARAMETER_OUT_OF_RANGE_L = 0x0e, // bt fw parameter value is out of range
BT_STATUS_UNKNOWN_STATUS_L = 0x0f, // bt returned an defined status code
BT_STATUS_UNKNOWN_STATUS_H = 0x10, // driver need to do error handle or not handle-well.
BT_STATUS_WRONG_LEVEL = 0x11, // should be under passive level
BT_STATUS_MAX
}BT_CTRL_STATUS,*PBT_CTRL_STATUS;
// OP codes definition between the user layer and driver
typedef enum _BT_CTRL_OPCODE_UPPER{
BT_UP_OP_BT_READY = 0x00,
BT_UP_OP_BT_SET_MODE = 0x01,
BT_UP_OP_BT_SET_TX_RX_PARAMETER = 0x02,
BT_UP_OP_BT_SET_GENERAL = 0x03,
BT_UP_OP_BT_GET_GENERAL = 0x04,
BT_UP_OP_BT_TEST_CTRL = 0x05,
BT_UP_OP_TEST_BT = 0x06,
BT_UP_OP_MAX
}BT_CTRL_OPCODE_UPPER,*PBT_CTRL_OPCODE_UPPER;
typedef enum _BT_SET_GENERAL{
BT_GSET_REG = 0x00,
BT_GSET_RESET = 0x01,
BT_GSET_TARGET_BD_ADDR = 0x02,
BT_GSET_TX_PWR_FINETUNE = 0x03,
BT_GSET_UPDATE_BT_PATCH = 0x04,
BT_GSET_MAX
}BT_SET_GENERAL,*PBT_SET_GENERAL;
typedef enum _BT_GET_GENERAL{
BT_GGET_REG = 0x00,
BT_GGET_STATUS = 0x01,
BT_GGET_REPORT = 0x02,
BT_GGET_MAX
}BT_GET_GENERAL,*PBT_GET_GENERAL;
// definition for BT_UP_OP_BT_SET_GENERAL
typedef enum _BT_REG_TYPE{
BT_REG_RF = 0,
BT_REG_MODEM = 1,
BT_REG_BLUEWIZE = 2,
BT_REG_VENDOR = 3,
BT_REG_LE = 4,
BT_REG_MAX
}BT_REG_TYPE,*PBT_REG_TYPE;
// definition for BT_UP_OP_BT_GET_GENERAL
typedef enum _BT_REPORT_TYPE{
BT_REPORT_RX_PACKET_CNT = 0,
BT_REPORT_RX_ERROR_BITS = 1,
BT_REPORT_RSSI = 2,
BT_REPORT_CFO_HDR_QUALITY = 3,
BT_REPORT_CONNECT_TARGET_BD_ADDR = 4,
BT_REPORT_MAX
}BT_REPORT_TYPE,*PBT_REPORT_TYPE;
void
MPTBT_Test(
PADAPTER Adapter,
u1Byte opCode,
u1Byte byte1,
u1Byte byte2,
u1Byte byte3
);
NDIS_STATUS
MPTBT_SendOidBT(
PADAPTER pAdapter,
void * InformationBuffer,
ULONG InformationBufferLength,
PULONG BytesRead,
PULONG BytesNeeded
);
void
MPTBT_FwC2hBtMpCtrl(
PADAPTER Adapter,
pu1Byte tmpBuf,
u1Byte length
);
void MPh2c_timeout_handle(void *FunctionContext);
void mptbt_BtControlProcess(
PADAPTER Adapter,
void * pInBuf
);
#define BT_H2C_MAX_RETRY 1
#define BT_MAX_C2H_LEN 20
typedef struct _BT_REQ_CMD{
UCHAR opCodeVer;
UCHAR OpCode;
USHORT paraLength;
UCHAR pParamStart[100];
} BT_REQ_CMD, *PBT_REQ_CMD;
typedef struct _BT_RSP_CMD{
USHORT status;
USHORT paraLength;
UCHAR pParamStart[100];
} BT_RSP_CMD, *PBT_RSP_CMD;
typedef struct _BT_H2C{
u1Byte opCodeVer:4;
u1Byte reqNum:4;
u1Byte opCode;
u1Byte buf[100];
}BT_H2C, *PBT_H2C;
typedef struct _BT_EXT_C2H{
u1Byte extendId;
u1Byte statusCode:4;
u1Byte retLen:4;
u1Byte opCodeVer:4;
u1Byte reqNum:4;
u1Byte buf[100];
}BT_EXT_C2H, *PBT_EXT_C2H;
typedef enum _BT_OPCODE_STATUS{
BT_OP_STATUS_SUCCESS = 0x00, // Success
BT_OP_STATUS_VERSION_MISMATCH = 0x01,
BT_OP_STATUS_UNKNOWN_OPCODE = 0x02,
BT_OP_STATUS_ERROR_PARAMETER = 0x03,
BT_OP_STATUS_MAX
}BT_OPCODE_STATUS,*PBT_OPCODE_STATUS;
//OP codes definition between driver and bt fw
typedef enum _BT_CTRL_OPCODE_LOWER{
BT_LO_OP_GET_BT_VERSION = 0x00,
BT_LO_OP_RESET = 0x01,
BT_LO_OP_TEST_CTRL = 0x02,
BT_LO_OP_SET_BT_MODE = 0x03,
BT_LO_OP_SET_CHNL_TX_GA = 0x04,
BT_LO_OP_SET_PKT_TYPE_LEN = 0x05,
BT_LO_OP_SET_PKT_CNT_L_PL_TYPE = 0x06,
BT_LO_OP_SET_PKT_CNT_H_PKT_INTV = 0x07,
BT_LO_OP_SET_PKT_HEADER = 0x08,
BT_LO_OP_SET_WHITENCOEFF = 0x09,
BT_LO_OP_SET_BD_ADDR_L = 0x0a,
BT_LO_OP_SET_BD_ADDR_H = 0x0b,
BT_LO_OP_WRITE_REG_ADDR = 0x0c,
BT_LO_OP_WRITE_REG_VALUE = 0x0d,
BT_LO_OP_GET_BT_STATUS = 0x0e,
BT_LO_OP_GET_BD_ADDR_L = 0x0f,
BT_LO_OP_GET_BD_ADDR_H = 0x10,
BT_LO_OP_READ_REG = 0x11,
BT_LO_OP_SET_TARGET_BD_ADDR_L = 0x12,
BT_LO_OP_SET_TARGET_BD_ADDR_H = 0x13,
BT_LO_OP_SET_TX_POWER_CALIBRATION = 0x14,
BT_LO_OP_GET_RX_PKT_CNT_L = 0x15,
BT_LO_OP_GET_RX_PKT_CNT_H = 0x16,
BT_LO_OP_GET_RX_ERROR_BITS_L = 0x17,
BT_LO_OP_GET_RX_ERROR_BITS_H = 0x18,
BT_LO_OP_GET_RSSI = 0x19,
BT_LO_OP_GET_CFO_HDR_QUALITY_L = 0x1a,
BT_LO_OP_GET_CFO_HDR_QUALITY_H = 0x1b,
BT_LO_OP_GET_TARGET_BD_ADDR_L = 0x1c,
BT_LO_OP_GET_TARGET_BD_ADDR_H = 0x1d,
BT_LO_OP_MAX
}BT_CTRL_OPCODE_LOWER,*PBT_CTRL_OPCODE_LOWER;
#endif /* #if (MP_DRIVER == 1) */
#endif // #ifndef __INC_MPT_BT_H