/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ //***** temporarily flag ******* //#define CONFIG_DISABLE_ODM #define CONFIG_ODM_REFRESH_RAMASK #define CONFIG_PHY_SETTING_WITH_ODM //for FPGA VERIFICATION config #define RTL8188E_FPGA_true_PHY_VERIFICATION 0 //***** temporarily flag ******* /* * Public General Config */ #define AUTOCONF_INCLUDED #define RTL871X_MODULE_NAME "88EU" #define DRV_NAME "rtl8188eu" #define CONFIG_USB_HCI #define CONFIG_RTL8188E #ifdef CONFIG_IOCTL_CFG80211 #define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER #define CONFIG_SET_SCAN_DENY_TIMER #endif /* * Internal General Config */ //#define CONFIG_H2CLBK #define CONFIG_EMBEDDED_FWIMG //#define CONFIG_FILE_FWIMG #define CONFIG_XMIT_ACK #ifdef CONFIG_XMIT_ACK #define CONFIG_ACTIVE_KEEP_ALIVE_CHECK #endif #define CONFIG_80211N_HT #define CONFIG_RECV_REORDERING_CTRL #define CONFIG_SUPPORT_USB_INT #ifdef CONFIG_SUPPORT_USB_INT #endif #define CONFIG_IPS #ifdef CONFIG_IPS #endif #define SUPPORT_HW_RFOFF_DETECTED #define CONFIG_LPS #if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT) #endif #ifdef CONFIG_LPS_LCLK #define CONFIG_XMIT_THREAD_MODE #endif #define CONFIG_AP_MODE #ifdef CONFIG_AP_MODE #ifdef CONFIG_INTERRUPT_BASED_TXBCN #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #endif #define CONFIG_NATIVEAP_MLME #define CONFIG_FIND_BEST_CHANNEL #endif #define CONFIG_P2P #ifdef CONFIG_P2P #ifndef CONFIG_WIFI_TEST #define CONFIG_P2P_REMOVE_GROUP_INFO #endif #define CONFIG_P2P_PS #endif #define CONFIG_SKB_COPY //for amsdu #define CONFIG_LED #ifdef CONFIG_LED #define CONFIG_SW_LED #endif // CONFIG_LED #define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface #define CONFIG_GLOBAL_UI_PID #define CONFIG_NEW_SIGNAL_STAT_PROCESS #define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */ #define CONFIG_BR_EXT // Enable NAT2.5 support for STA mode interface with a L2 Bridge #ifdef CONFIG_BR_EXT #define CONFIG_BR_EXT_BRNAME "br0" #endif // CONFIG_BR_EXT /* * Interface Related Config */ #ifndef CONFIG_MINIMAL_MEMORY_USAGE #define CONFIG_USB_TX_AGGREGATION #define CONFIG_USB_RX_AGGREGATION #endif #define CONFIG_PREALLOC_RECV_SKB /* * USB VENDOR REQ BUFFER ALLOCATION METHOD * if not set we'll use function local variable (stack memory) */ #define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC #define CONFIG_USB_VENDOR_REQ_MUTEX #define CONFIG_VENDOR_REQ_RETRY /* * HAL Related Config */ #define RTL8188E_RX_PACKET_INCLUDE_CRC 0 #define SUPPORTED_BLOCK_IO //#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0 #define CONFIG_OUT_EP_WIFI_MODE 0 #define ENABLE_USB_DROP_INCORRECT_OUT 0 //#define RTL8192CU_ADHOC_WORKAROUND_SETTING #define DISABLE_BB_RF 0 //#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0 #ifdef CONFIG_MP_INCLUDED #define MP_DRIVER 1 #define CONFIG_MP_IWPRIV_SUPPORT //#undef CONFIG_USB_TX_AGGREGATION //#undef CONFIG_USB_RX_AGGREGATION #else #define MP_DRIVER 0 #endif /* * Platform Related Config */ /* * Outsource Related Config */ #define RTL8192CE_SUPPORT 0 #define RTL8192CU_SUPPORT 0 #define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT) #define RTL8192DE_SUPPORT 0 #define RTL8192DU_SUPPORT 0 #define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT) #define RTL8723AU_SUPPORT 0 #define RTL8723AS_SUPPORT 0 #define RTL8723AE_SUPPORT 0 #define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT) #define RTL8723_FPGA_VERIFICATION 0 #define RTL8188EE_SUPPORT 0 #define RTL8188EU_SUPPORT 1 #define RTL8188ES_SUPPORT 0 #define RTL8188E_SUPPORT (RTL8188EE_SUPPORT|RTL8188EU_SUPPORT|RTL8188ES_SUPPORT) #define RTL8188E_FOR_TEST_CHIP 0 //#if (RTL8188E_SUPPORT==1) #define RATE_ADAPTIVE_SUPPORT 1 #define POWER_TRAINING_ACTIVE 1 //#endif #ifdef CONFIG_USB_TX_AGGREGATION //#define CONFIG_TX_EARLY_MODE #endif #ifdef CONFIG_TX_EARLY_MODE #define RTL8188E_EARLY_MODE_PKT_NUM_10 0 #endif #define CONFIG_80211D /* * Debug Related Config */ #define DBG 1 //#define CONFIG_DEBUG /* DBG_88E, etc... */ //#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */ #define CONFIG_PROC_DEBUG #define DBG_CONFIG_ERROR_DETECT //#define DBG_CONFIG_ERROR_DETECT_INT //#define DBG_CONFIG_ERROR_RESET //#define DBG_IO //#define DBG_DELAY_OS //#define DBG_MEM_ALLOC //#define DBG_IOCTL //#define DBG_TX //#define DBG_XMIT_BUF //#define DBG_XMIT_BUF_EXT //#define DBG_TX_DROP_FRAME //#define DBG_RX_DROP_FRAME //#define DBG_RX_SEQ //#define DBG_RX_SIGNAL_DISPLAY_PROCESSING //#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap" //#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE //#define DBG_ROAMING_TEST //#define DBG_HAL_INIT_PROFILING //TX use 1 urb //#define CONFIG_SINGLE_XMIT_BUF //RX use 1 urb //#define CONFIG_SINGLE_RECV_BUF