/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #define _HCI_HAL_INIT_C_ #include #include #include #include #include #include #include #include #include #include #if DISABLE_BB_RF #define HAL_MAC_ENABLE 0 #define HAL_BB_ENABLE 0 #define HAL_RF_ENABLE 0 #else #define HAL_MAC_ENABLE 1 #define HAL_BB_ENABLE 1 #define HAL_RF_ENABLE 1 #endif static void _ConfigNormalChipOutEP_8188E( struct adapter *pAdapter, u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); switch (NumOutPipe){ case 3: pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_LQ|TX_SELE_NQ; pHalData->OutEpNumber=3; break; case 2: pHalData->OutEpQueueSel=TX_SELE_HQ| TX_SELE_NQ; pHalData->OutEpNumber=2; break; case 1: pHalData->OutEpQueueSel=TX_SELE_HQ; pHalData->OutEpNumber=1; break; default: break; } DBG_871X("%s OutEpQueueSel(0x%02x), OutEpNumber(%d)\n",__FUNCTION__,pHalData->OutEpQueueSel,pHalData->OutEpNumber ); } static bool HalUsbSetQueuePipeMapping8188EUsb( struct adapter *pAdapter, u8 NumInPipe, u8 NumOutPipe ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); bool result = false; _ConfigNormalChipOutEP_8188E(pAdapter, NumOutPipe); /* Normal chip with one IN and one OUT doesn't have interrupt IN EP. */ if (1 == pHalData->OutEpNumber){ if (1 != NumInPipe){ return result; } } /* All config other than above support one Bulk IN and one Interrupt IN. */ /* if (2 != NumInPipe){ */ /* return result; */ /* */ result = Hal_MappingOutPipe(pAdapter, NumOutPipe); return result; } static void rtl8188eu_interface_configure(struct adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct dvobj_priv *pdvobjpriv = adapter_to_dvobj(padapter); if (pdvobjpriv->ishighspeed == true) { pHalData->UsbBulkOutSize = USB_HIGH_SPEED_BULK_SIZE;/* 512 bytes */ } else { pHalData->UsbBulkOutSize = USB_FULL_SPEED_BULK_SIZE;/* 64 bytes */ } pHalData->interfaceIndex = pdvobjpriv->InterfaceNumber; pHalData->UsbTxAggMode = 1; pHalData->UsbTxAggDescNum = 0x6; /* only 4 bits */ pHalData->UsbRxAggMode = USB_RX_AGG_DMA;/* USB_RX_AGG_DMA; */ pHalData->UsbRxAggBlockCount = 8; /* unit : 512b */ pHalData->UsbRxAggBlockTimeout = 0x6; pHalData->UsbRxAggPageCount = 48; /* uint :128 b 0x0A; 10 = MAX_RX_DMA_BUFFER_SIZE/2/pHalData->UsbBulkOutSize */ pHalData->UsbRxAggPageTimeout = 0x4; /* 6, absolute time = 34ms/(2^6) */ HalUsbSetQueuePipeMapping8188EUsb(padapter, pdvobjpriv->RtNumInPipes, pdvobjpriv->RtNumOutPipes); } static u32 InitPowerOn_rtl8188eu(struct adapter *padapter) { u16 value16; u8 bMacPwrCtrlOn=false; /* HW Power on sequence */ rtw_hal_get_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); if (bMacPwrCtrlOn == true) return _SUCCESS; if (!HalPwrSeqCmdParsing(padapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_PWR_ON_FLOW)) { DBG_871X(KERN_ERR "%s: run power on flow fail\n", __func__); return _FAIL; } /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ /* Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ rtw_write16(padapter, REG_CR, 0x00); /* suggseted by zhouzhou, by page, 20111230 */ /* Enable MAC DMA/WMAC/SCHEDULE/SEC block */ value16 = rtw_read16(padapter, REG_CR); value16 |= (HCI_TXDMA_EN | HCI_RXDMA_EN | TXDMA_EN | RXDMA_EN | PROTOCOL_EN | SCHEDULE_EN | ENSEC | CALTMR_EN); /* for SDIO - Set CR bit10 to enable 32k calibration. Suggested by SD1 Gimmy. Added by tynli. 2011.08.31. */ rtw_write16(padapter, REG_CR, value16); bMacPwrCtrlOn = true; rtw_hal_set_hwreg(padapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); return _SUCCESS; } static void _dbg_dump_macreg(struct adapter *padapter) { u32 offset = 0; u32 val32 = 0; u32 index =0 ; for(index=0;index<64;index++) { offset = index*4; val32 = rtw_read32(padapter,offset); DBG_8192C("offset : 0x%02x ,val:0x%08x\n",offset,val32); } } static void _InitPABias(struct adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); u8 pa_setting; bool is92C = IS_92C_SERIAL(pHalData->VersionID); /* FIXED PA current issue */ /* efuse_one_byte_read(padapter, 0x1FA, &pa_setting); */ pa_setting = EFUSE_Read1Byte(padapter, 0x1FA); /* RT_TRACE(COMP_INIT, DBG_LOUD, ("_InitPABias 0x1FA 0x%x\n",pa_setting)); */ if (!(pa_setting & BIT0)) { PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x0F406); PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x4F406); PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0x8F406); PHY_SetRFReg(padapter, RF_PATH_A, 0x15, 0x0FFFFF, 0xCF406); /* RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path A\n")); */ } if (!(pa_setting & BIT1) && is92C) { PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x0F406); PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x4F406); PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0x8F406); PHY_SetRFReg(padapter,RF_PATH_B, 0x15, 0x0FFFFF, 0xCF406); /* RT_TRACE(COMP_INIT, DBG_LOUD, ("PA BIAS path B\n")); */ } if (!(pa_setting & BIT4)) { pa_setting = rtw_read8(padapter, 0x16); pa_setting &= 0x0F; rtw_write8(padapter, 0x16, pa_setting | 0x80); rtw_write8(padapter, 0x16, pa_setting | 0x90); } } #ifdef CONFIG_BT_COEXIST static void _InitBTCoexist(struct adapter *padapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); u8 u1Tmp; if (pbtpriv->BT_Coexist && pbtpriv->BT_CoexistType == BT_CSR_BC4) { /* if MP_DRIVER != 1 */ if (padapter->registrypriv.mp_mode == 0) { if (pbtpriv->BT_Ant_isolation) { rtw_write8( padapter,REG_GPIO_MUXCFG, 0xa0); DBG_8192C("BT write 0x%x = 0x%x\n", REG_GPIO_MUXCFG, 0xa0); } } /* endif */ u1Tmp = rtw_read8(padapter, 0x4fd) & BIT0; u1Tmp = u1Tmp | ((pbtpriv->BT_Ant_isolation==1)?0:BIT1) | ((pbtpriv->BT_Service==BT_SCO)?0:BIT2); rtw_write8( padapter, 0x4fd, u1Tmp); DBG_8192C("BT write 0x%x = 0x%x for non-isolation\n", 0x4fd, u1Tmp); rtw_write32(padapter, REG_BT_COEX_TABLE+4, 0xaaaa9aaa); DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+4, 0xaaaa9aaa); rtw_write32(padapter, REG_BT_COEX_TABLE+8, 0xffbd0040); DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+8, 0xffbd0040); rtw_write32(padapter, REG_BT_COEX_TABLE+0xc, 0x40000010); DBG_8192C("BT write 0x%x = 0x%x\n", REG_BT_COEX_TABLE+0xc, 0x40000010); /* Config to 1T1R */ u1Tmp = rtw_read8(padapter,rOFDM0_TRxPathEnable); u1Tmp &= ~(BIT1); rtw_write8( padapter, rOFDM0_TRxPathEnable, u1Tmp); DBG_8192C("BT write 0xC04 = 0x%x\n", u1Tmp); u1Tmp = rtw_read8(padapter, rOFDM1_TRxPathEnable); u1Tmp &= ~(BIT1); rtw_write8( padapter, rOFDM1_TRxPathEnable, u1Tmp); DBG_8192C("BT write 0xD04 = 0x%x\n", u1Tmp); } } #endif /* */ /* */ /* MAC init functions */ /* */ /* */ static void _SetMacID( struct adapter *Adapter, u8* MacID ) { u32 i; for(i=0 ; i< MAC_ADDR_LEN ; i++){ rtw_write32(Adapter, REG_MACID+i, MacID[i]); } } static void _SetBSSID( struct adapter *Adapter, u8* BSSID ) { u32 i; for(i=0 ; i< MAC_ADDR_LEN ; i++){ rtw_write32(Adapter, REG_BSSID+i, BSSID[i]); } } /* Shall USB interface init this? */ static void _InitInterrupt( struct adapter *Adapter ) { u32 imr,imr_ex; u8 usb_opt; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* HISR write one to clear */ rtw_write32(Adapter, REG_HISR_88E, 0xFFFFFFFF); /* HIMR - */ imr = IMR_PSTIMEOUT_88E | IMR_TBDER_88E | IMR_CPWM_88E | IMR_CPWM2_88E ; rtw_write32(Adapter, REG_HIMR_88E, imr); pHalData->IntrMask[0]=imr; imr_ex = IMR_TXERR_88E | IMR_RXERR_88E | IMR_TXFOVW_88E |IMR_RXFOVW_88E; rtw_write32(Adapter, REG_HIMRE_88E, imr_ex); pHalData->IntrMask[1]=imr_ex; /* REG_USB_SPECIAL_OPTION - BIT(4) */ /* 0; Use interrupt endpoint to upload interrupt pkt */ /* 1; Use bulk endpoint to upload interrupt pkt, */ usb_opt = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION); if (!adapter_to_dvobj(Adapter)->ishighspeed #ifdef CONFIG_USB_INTERRUPT_IN_PIPE || pHalData->RtIntInPipe == 0x05 #endif ) usb_opt = usb_opt & (~INT_BULK_SEL); else usb_opt = usb_opt | (INT_BULK_SEL); rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt ); } static void _InitQueueReservedPage( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; u32 outEPNum = (u32)pHalData->OutEpNumber; u32 numHQ = 0; u32 numLQ = 0; u32 numNQ = 0; u32 numPubQ; u32 value32; u8 value8; bool bWiFiConfig = pregistrypriv->wifi_spec; if ((bWiFiConfig)|| (pregistrypriv->qos_opt_enable)) { if (pHalData->OutEpQueueSel & TX_SELE_HQ) { numHQ = 0x29; } if (pHalData->OutEpQueueSel & TX_SELE_LQ) { numLQ = 0x1C; } /* NOTE: This step shall be proceed before writting REG_RQPN. */ if (pHalData->OutEpQueueSel & TX_SELE_NQ) { numNQ = 0x1C; } value8 = (u8)_NPQ(numNQ); rtw_write8(Adapter, REG_RQPN_NPQ, value8); numPubQ = 0xA8 - numHQ - numLQ - numNQ; /* TX DMA */ value32 = _HPQ(numHQ) | _LPQ(numLQ) | _PUBQ(numPubQ) | LD_RQPN; rtw_write32(Adapter, REG_RQPN, value32); } else { rtw_write16(Adapter,REG_RQPN_NPQ, 0x0000);/* Just follow MP Team,??? Georgia 03/28 */ rtw_write16(Adapter,REG_RQPN_NPQ, 0x0d); rtw_write32(Adapter,REG_RQPN, 0x808E000d);/* reserve 7 page for LPS */ } } static void _InitTxBufferBoundary( struct adapter *Adapter, u8 txpktbuf_bndy ) { struct registry_priv *pregistrypriv = &Adapter->registrypriv; /* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); */ /* u16 txdmactrl; */ rtw_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy); rtw_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy); rtw_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy); rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy); rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy); } static void _InitPageBoundary( struct adapter *Adapter ) { /* RX Page Boundary */ /* */ u16 rxff_bndy = MAX_RX_DMA_BUFFER_SIZE_88E-1; rtw_write16(Adapter, (REG_TRXFF_BNDY + 2), rxff_bndy); } static void _InitNormalChipRegPriority( struct adapter *Adapter, u16 beQ, u16 bkQ, u16 viQ, u16 voQ, u16 mgtQ, u16 hiQ ) { u16 value16 = (rtw_read16(Adapter, REG_TRXDMA_CTRL) & 0x7); value16 |= _TXDMA_BEQ_MAP(beQ) | _TXDMA_BKQ_MAP(bkQ) | _TXDMA_VIQ_MAP(viQ) | _TXDMA_VOQ_MAP(voQ) | _TXDMA_MGQ_MAP(mgtQ)| _TXDMA_HIQ_MAP(hiQ); rtw_write16(Adapter, REG_TRXDMA_CTRL, value16); } static void _InitNormalChipOneOutEpPriority( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u16 value = 0; switch (pHalData->OutEpQueueSel) { case TX_SELE_HQ: value = QUEUE_HIGH; break; case TX_SELE_LQ: value = QUEUE_LOW; break; case TX_SELE_NQ: value = QUEUE_NORMAL; break; default: /* RT_ASSERT(false,("Shall not reach here!\n")); */ break; } _InitNormalChipRegPriority(Adapter, value, value, value, value, value, value ); } static void _InitNormalChipTwoOutEpPriority( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ; u16 valueHi = 0; u16 valueLow = 0; switch (pHalData->OutEpQueueSel) { case (TX_SELE_HQ | TX_SELE_LQ): valueHi = QUEUE_HIGH; valueLow = QUEUE_LOW; break; case (TX_SELE_NQ | TX_SELE_LQ): valueHi = QUEUE_NORMAL; valueLow = QUEUE_LOW; break; case (TX_SELE_HQ | TX_SELE_NQ): valueHi = QUEUE_HIGH; valueLow = QUEUE_NORMAL; break; default: /* RT_ASSERT(false,("Shall not reach here!\n")); */ break; } if (!pregistrypriv->wifi_spec ){ beQ = valueLow; bkQ = valueLow; viQ = valueHi; voQ = valueHi; mgtQ = valueHi; hiQ = valueHi; } else{/* for WMM ,CONFIG_OUT_EP_WIFI_MODE */ beQ = valueLow; bkQ = valueHi; viQ = valueHi; voQ = valueLow; mgtQ = valueHi; hiQ = valueHi; } _InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ); } static void _InitNormalChipThreeOutEpPriority( struct adapter *Adapter ) { struct registry_priv *pregistrypriv = &Adapter->registrypriv; u16 beQ,bkQ,viQ,voQ,mgtQ,hiQ; if (!pregistrypriv->wifi_spec ){/* typical setting */ beQ = QUEUE_LOW; bkQ = QUEUE_LOW; viQ = QUEUE_NORMAL; voQ = QUEUE_HIGH; mgtQ = QUEUE_HIGH; hiQ = QUEUE_HIGH; } else{/* for WMM */ beQ = QUEUE_LOW; bkQ = QUEUE_NORMAL; viQ = QUEUE_NORMAL; voQ = QUEUE_HIGH; mgtQ = QUEUE_HIGH; hiQ = QUEUE_HIGH; } _InitNormalChipRegPriority(Adapter,beQ,bkQ,viQ,voQ,mgtQ,hiQ); } static void _InitQueuePriority( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); switch (pHalData->OutEpNumber) { case 1: _InitNormalChipOneOutEpPriority(Adapter); break; case 2: _InitNormalChipTwoOutEpPriority(Adapter); break; case 3: _InitNormalChipThreeOutEpPriority(Adapter); break; default: /* RT_ASSERT(false,("Shall not reach here!\n")); */ break; } } static void _InitHardwareDropIncorrectBulkOut( struct adapter *Adapter ) { u32 value32 = rtw_read32(Adapter, REG_TXDMA_OFFSET_CHK); value32 |= DROP_DATA_EN; rtw_write32(Adapter, REG_TXDMA_OFFSET_CHK, value32); } static void _InitNetworkType( struct adapter *Adapter ) { u32 value32; value32 = rtw_read32(Adapter, REG_CR); /* TODO: use the other function to set network type */ value32 = (value32 & ~MASK_NETTYPE) | _NETTYPE(NT_LINK_AP); rtw_write32(Adapter, REG_CR, value32); /* RASSERT(pIoBase->rtw_read8(REG_CR + 2) == 0x2); */ } static void _InitTransferPageSize( struct adapter *Adapter ) { /* Tx page size is always 128. */ u8 value8; value8 = _PSRX(PBP_128) | _PSTX(PBP_128); rtw_write8(Adapter, REG_PBP, value8); } static void _InitDriverInfoSize( struct adapter *Adapter, u8 drvInfoSize ) { rtw_write8(Adapter,REG_RX_DRVINFO_SZ, drvInfoSize); } static void _InitWMACSetting( struct adapter *Adapter ) { /* u32 value32; */ /* u16 value16; */ HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* pHalData->ReceiveConfig = AAP | APM | AM | AB | APP_ICV | ADF | AMF | APP_FCS | HTC_LOC_CTRL | APP_MIC | APP_PHYSTS; */ /* pHalData->ReceiveConfig = */ /* RCR_AAP | RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; */ /* don't turn on AAP, it will allow all packets to driver */ pHalData->ReceiveConfig = RCR_APM | RCR_AM | RCR_AB |RCR_CBSSID_DATA| RCR_CBSSID_BCN| RCR_APP_ICV | RCR_AMF | RCR_HTC_LOC_CTRL | RCR_APP_MIC | RCR_APP_PHYSTS; /* some REG_RCR will be modified later by phy_ConfigMACWithHeaderFile() */ rtw_write32(Adapter, REG_RCR, pHalData->ReceiveConfig); /* Accept all multicast address */ rtw_write32(Adapter, REG_MAR, 0xFFFFFFFF); rtw_write32(Adapter, REG_MAR + 4, 0xFFFFFFFF); /* Accept all data frames */ /* value16 = 0xFFFF; */ /* rtw_write16(Adapter, REG_RXFLTMAP2, value16); */ /* 2010.09.08 hpfan */ /* Since ADF is removed from RCR, ps-poll will not be indicate to driver, */ /* RxFilterMap should mask ps-poll to gurantee AP mode can rx ps-poll. */ /* value16 = 0x400; */ /* rtw_write16(Adapter, REG_RXFLTMAP1, value16); */ /* Accept all management frames */ /* value16 = 0xFFFF; */ /* rtw_write16(Adapter, REG_RXFLTMAP0, value16); */ /* enable RX_SHIFT bits */ /* rtw_write8(Adapter, REG_TRXDMA_CTRL, rtw_read8(Adapter, REG_TRXDMA_CTRL)|BIT(1)); */ } static void _InitAdaptiveCtrl( struct adapter *Adapter ) { u16 value16; u32 value32; /* Response Rate Set */ value32 = rtw_read32(Adapter, REG_RRSR); value32 &= ~RATE_BITMAP_ALL; value32 |= RATE_RRSR_CCK_ONLY_1M; rtw_write32(Adapter, REG_RRSR, value32); /* CF-END Threshold */ /* m_spIoBase->rtw_write8(REG_CFEND_TH, 0x1); */ /* SIFS (used in NAV) */ value16 = _SPEC_SIFS_CCK(0x10) | _SPEC_SIFS_OFDM(0x10); rtw_write16(Adapter, REG_SPEC_SIFS, value16); /* Retry Limit */ value16 = _LRL(0x30) | _SRL(0x30); rtw_write16(Adapter, REG_RL, value16); } static void _InitRateFallback( struct adapter *Adapter ) { /* Set Data Auto Rate Fallback Retry Count register. */ rtw_write32(Adapter, REG_DARFRC, 0x00000000); rtw_write32(Adapter, REG_DARFRC+4, 0x10080404); rtw_write32(Adapter, REG_RARFRC, 0x04030201); rtw_write32(Adapter, REG_RARFRC+4, 0x08070605); } static void _InitEDCA( struct adapter *Adapter ) { /* Set Spec SIFS (used in NAV) */ rtw_write16(Adapter,REG_SPEC_SIFS, 0x100a); rtw_write16(Adapter,REG_MAC_SPEC_SIFS, 0x100a); /* Set SIFS for CCK */ rtw_write16(Adapter,REG_SIFS_CTX, 0x100a); /* Set SIFS for OFDM */ rtw_write16(Adapter,REG_SIFS_TRX, 0x100a); /* TXOP */ rtw_write32(Adapter, REG_EDCA_BE_PARAM, 0x005EA42B); rtw_write32(Adapter, REG_EDCA_BK_PARAM, 0x0000A44F); rtw_write32(Adapter, REG_EDCA_VI_PARAM, 0x005EA324); rtw_write32(Adapter, REG_EDCA_VO_PARAM, 0x002FA226); } static void _InitBeaconMaxError( struct adapter *Adapter, bool InfraMode ) { } static void _InitRDGSetting( struct adapter *Adapter ) { rtw_write8(Adapter,REG_RD_CTRL,0xFF); rtw_write16(Adapter, REG_RD_NAV_NXT, 0x200); rtw_write8(Adapter,REG_RD_RESP_PKT_TH,0x05); } static void _InitRxSetting( struct adapter *Adapter ) { rtw_write32(Adapter, REG_MACID, 0x87654321); rtw_write32(Adapter, 0x0700, 0x87654321); } static void _InitRetryFunction( struct adapter *Adapter ) { u8 value8; value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL); value8 |= EN_AMPDU_RTY_NEW; rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8); /* Set ACK timeout */ rtw_write8(Adapter, REG_ACKTO, 0x40); } /*----------------------------------------------------------------------------- * Function: usb_AggSettingTxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static void usb_AggSettingTxUpdate( struct adapter * Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */ u32 value32; if (Adapter->registrypriv.wifi_spec) pHalData->UsbTxAggMode = false; if (pHalData->UsbTxAggMode){ value32 = rtw_read32(Adapter, REG_TDECTRL); value32 = value32 & ~(BLK_DESC_NUM_MASK << BLK_DESC_NUM_SHIFT); value32 |= ((pHalData->UsbTxAggDescNum & BLK_DESC_NUM_MASK) << BLK_DESC_NUM_SHIFT); rtw_write32(Adapter, REG_TDECTRL, value32); } } /* usb_AggSettingTxUpdate */ /*----------------------------------------------------------------------------- * Function: usb_AggSettingRxUpdate() * * Overview: Seperate TX/RX parameters update independent for TP detection and * dynamic TX/RX aggreagtion parameters update. * * Input: PADAPTER * * Output/Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Seperate to smaller function. * *---------------------------------------------------------------------------*/ static void usb_AggSettingRxUpdate( struct adapter * Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* PMGNT_INFO pMgntInfo = &(Adapter->MgntInfo); */ u8 valueDMA; u8 valueUSB; valueDMA = rtw_read8(Adapter, REG_TRXDMA_CTRL); valueUSB = rtw_read8(Adapter, REG_USB_SPECIAL_OPTION); switch (pHalData->UsbRxAggMode) { case USB_RX_AGG_DMA: valueDMA |= RXDMA_AGG_EN; valueUSB &= ~USB_AGG_EN; break; case USB_RX_AGG_USB: valueDMA &= ~RXDMA_AGG_EN; valueUSB |= USB_AGG_EN; break; case USB_RX_AGG_MIX: valueDMA |= RXDMA_AGG_EN; valueUSB |= USB_AGG_EN; break; case USB_RX_AGG_DISABLE: default: valueDMA &= ~RXDMA_AGG_EN; valueUSB &= ~USB_AGG_EN; break; } rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA); rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB); switch (pHalData->UsbRxAggMode) { case USB_RX_AGG_DMA: rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount); rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, pHalData->UsbRxAggPageTimeout); break; case USB_RX_AGG_USB: rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount); rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout); break; case USB_RX_AGG_MIX: rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, pHalData->UsbRxAggPageCount); rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, (pHalData->UsbRxAggPageTimeout& 0x1F));/* 0x280[12:8] */ rtw_write8(Adapter, REG_USB_AGG_TH, pHalData->UsbRxAggBlockCount); rtw_write8(Adapter, REG_USB_AGG_TO, pHalData->UsbRxAggBlockTimeout); break; case USB_RX_AGG_DISABLE: default: /* TODO: */ break; } switch (PBP_128) { case PBP_128: pHalData->HwRxPageSize = 128; break; case PBP_64: pHalData->HwRxPageSize = 64; break; case PBP_256: pHalData->HwRxPageSize = 256; break; case PBP_512: pHalData->HwRxPageSize = 512; break; case PBP_1024: pHalData->HwRxPageSize = 1024; break; default: /* RT_ASSERT(false, ("RX_PAGE_SIZE_REG_VALUE definition is incorrect!\n")); */ break; } } /* usb_AggSettingRxUpdate */ static void InitUsbAggregationSetting( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); /* Tx aggregation setting */ usb_AggSettingTxUpdate(Adapter); /* Rx aggregation setting */ usb_AggSettingRxUpdate(Adapter); /* 201/12/10 MH Add for USB agg mode dynamic switch. */ pHalData->UsbRxHighSpeedMode = false; } static void HalRxAggr8188EUsb( struct adapter *Adapter, bool Value ) { } /*----------------------------------------------------------------------------- * Function: USB_AggModeSwitch() * * Overview: When RX traffic is more than 40M, we need to adjust some parameters to increase * RX speed by increasing batch indication size. This will decrease TCP ACK speed, we * need to monitor the influence of FTP/network share. * For TX mode, we are still ubder investigation. * * Input: PADAPTER * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 12/10/2010 MHC Create Version 0. * *---------------------------------------------------------------------------*/ static void USB_AggModeSwitch( struct adapter * Adapter ) { } /* USB_AggModeSwitch */ static void _InitOperationMode( struct adapter * Adapter ) { } static void _InitBeaconParameters( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); rtw_write16(Adapter, REG_BCN_CTRL, 0x1010); /* TODO: Remove these magic number */ rtw_write16(Adapter, REG_TBTT_PROHIBIT,0x6404);/* ms */ rtw_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);/* 5ms */ rtw_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); /* 2ms */ /* Suggested by designer timchen. Change beacon AIFS to the largest number */ /* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */ rtw_write16(Adapter, REG_BCNTCFG, 0x660F); pHalData->RegBcnCtrlVal = rtw_read8(Adapter, REG_BCN_CTRL); pHalData->RegTxPause = rtw_read8(Adapter, REG_TXPAUSE); pHalData->RegFwHwTxQCtrl = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL+2); pHalData->RegReg542 = rtw_read8(Adapter, REG_TBTT_PROHIBIT+2); pHalData->RegCR_1 = rtw_read8(Adapter, REG_CR+1); } static void _InitRFType( struct adapter *Adapter ) { struct registry_priv *pregpriv = &Adapter->registrypriv; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); bool is92CU = IS_92C_SERIAL(pHalData->VersionID); #if DISABLE_BB_RF pHalData->rf_chip = RF_PSEUDO_11N; return; #endif pHalData->rf_chip = RF_6052; if (false == is92CU){ pHalData->rf_type = RF_1T1R; DBG_8192C("Set RF Chip ID to RF_6052 and RF type to 1T1R.\n"); return; } /* TODO: Consider that EEPROM set 92CU to 1T1R later. */ /* Force to overwrite setting according to chip version. Ignore EEPROM setting. */ /* pHalData->RF_Type = is92CU ? RF_2T2R : RF_1T1R; */ MSG_8192C("Set RF Chip ID to RF_6052 and RF type to %d.\n", pHalData->rf_type); } static void _BeaconFunctionEnable( struct adapter * Adapter, bool Enable, bool Linked ) { rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1)); /* SetBcnCtrlReg(Adapter, (BIT4 | BIT3 | BIT1), 0x00); */ /* RT_TRACE(COMP_BEACON, DBG_LOUD, ("_BeaconFunctionEnable 0x550 0x%x\n", PlatformEFIORead1Byte(Adapter, 0x550))); */ rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F); } /* Set CCK and OFDM Block "ON" */ static void _BBTurnOnBlock( struct adapter * Adapter ) { #if (DISABLE_BB_RF) return; #endif PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bCCKEn, 0x1); PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bOFDMEn, 0x1); } static void _RfPowerSave( struct adapter * Adapter ) { } enum { Antenna_Lfet = 1, Antenna_Right = 2, }; static void _InitAntenna_Selection(struct adapter *Adapter) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); if (pHalData->AntDivCfg==0) return; DBG_8192C("==> %s ....\n",__FUNCTION__); rtw_write32(Adapter, REG_LEDCFG0, rtw_read32(Adapter, REG_LEDCFG0)|BIT23); PHY_SetBBReg(Adapter, rFPGA0_XAB_RFParameter, BIT13, 0x01); if (PHY_QueryBBReg(Adapter, rFPGA0_XA_RFInterfaceOE, 0x300) == Antenna_A) pHalData->CurAntenna = Antenna_A; else pHalData->CurAntenna = Antenna_B; DBG_8192C("%s,Cur_ant:(%x)%s\n",__FUNCTION__,pHalData->CurAntenna,(pHalData->CurAntenna == Antenna_A)?"Antenna_A":"Antenna_B"); } /* */ /* 2010/08/26 MH Add for selective suspend mode check. */ /* If Efuse 0x0e bit1 is not enabled, we can not support selective suspend for Minicard and */ /* slim card. */ /* */ static void HalDetectSelectiveSuspendMode( struct adapter * Adapter ) { } /* HalDetectSelectiveSuspendMode */ /*----------------------------------------------------------------------------- * Function: HwSuspendModeEnable92Cu() * * Overview: HW suspend mode switch. * * Input: NONE * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 08/23/2010 MHC HW suspend mode switch test.. *---------------------------------------------------------------------------*/ static void HwSuspendModeEnable_88eu( struct adapter *pAdapter, u8 Type ) { return; } /* HwSuspendModeEnable92Cu */ rt_rf_power_state RfOnOffDetect(struct adapter *pAdapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); u8 val8; rt_rf_power_state rfpowerstate = rf_off; if (adapter_to_pwrctl(pAdapter)->bHWPowerdown) { val8 = rtw_read8(pAdapter, REG_HSISR); DBG_8192C("pwrdown, 0x5c(BIT7)=%02x\n", val8); rfpowerstate = (val8 & BIT7) ? rf_off: rf_on; } else /* rf on/off */ { rtw_write8( pAdapter, REG_MAC_PINMUX_CFG,rtw_read8(pAdapter, REG_MAC_PINMUX_CFG)&~(BIT3)); val8 = rtw_read8(pAdapter, REG_GPIO_IO_SEL); DBG_8192C("GPIO_IN=%02x\n", val8); rfpowerstate = (val8 & BIT3) ? rf_on : rf_off; } return rfpowerstate; } /* HalDetectPwrDownMode */ void _ps_open_RF(struct adapter *padapter); static u32 rtl8188eu_hal_init(struct adapter *Adapter) { u8 value8 = 0; u16 value16; u8 txpktbuf_bndy; u32 status = _SUCCESS; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct pwrctrl_priv *pwrctrlpriv = adapter_to_pwrctl(Adapter); struct registry_priv *pregistrypriv = &Adapter->registrypriv; rt_rf_power_state eRfPowerStateToSet; #ifdef CONFIG_BT_COEXIST struct btcoexist_priv *pbtpriv = &(pHalData->bt_coexist); #endif u32 init_start_time = rtw_get_current_time(); #ifdef DBG_HAL_INIT_PROFILING enum HAL_INIT_STAGES { HAL_INIT_STAGES_BEGIN = 0, HAL_INIT_STAGES_INIT_PW_ON, HAL_INIT_STAGES_MISC01, HAL_INIT_STAGES_DOWNLOAD_FW, HAL_INIT_STAGES_MAC, HAL_INIT_STAGES_BB, HAL_INIT_STAGES_RF, HAL_INIT_STAGES_EFUSE_PATCH, HAL_INIT_STAGES_INIT_LLTT, HAL_INIT_STAGES_MISC02, HAL_INIT_STAGES_TURN_ON_BLOCK, HAL_INIT_STAGES_INIT_SECURITY, HAL_INIT_STAGES_MISC11, HAL_INIT_STAGES_INIT_HAL_DM, /* HAL_INIT_STAGES_RF_PS, */ HAL_INIT_STAGES_IQK, HAL_INIT_STAGES_PW_TRACK, HAL_INIT_STAGES_LCK, /* HAL_INIT_STAGES_MISC21, */ /* HAL_INIT_STAGES_INIT_PABIAS, */ #ifdef CONFIG_BT_COEXIST HAL_INIT_STAGES_BT_COEXIST, #endif /* HAL_INIT_STAGES_ANTENNA_SEL, */ /* HAL_INIT_STAGES_MISC31, */ HAL_INIT_STAGES_END, HAL_INIT_STAGES_NUM }; char * hal_init_stages_str[] = { "HAL_INIT_STAGES_BEGIN", "HAL_INIT_STAGES_INIT_PW_ON", "HAL_INIT_STAGES_MISC01", "HAL_INIT_STAGES_DOWNLOAD_FW", "HAL_INIT_STAGES_MAC", "HAL_INIT_STAGES_BB", "HAL_INIT_STAGES_RF", "HAL_INIT_STAGES_EFUSE_PATCH", "HAL_INIT_STAGES_INIT_LLTT", "HAL_INIT_STAGES_MISC02", "HAL_INIT_STAGES_TURN_ON_BLOCK", "HAL_INIT_STAGES_INIT_SECURITY", "HAL_INIT_STAGES_MISC11", "HAL_INIT_STAGES_INIT_HAL_DM", /* HAL_INIT_STAGES_RF_PS", */ "HAL_INIT_STAGES_IQK", "HAL_INIT_STAGES_PW_TRACK", "HAL_INIT_STAGES_LCK", /* HAL_INIT_STAGES_MISC21", */ #ifdef CONFIG_BT_COEXIST "HAL_INIT_STAGES_BT_COEXIST", #endif /* HAL_INIT_STAGES_ANTENNA_SEL", */ /* HAL_INIT_STAGES_MISC31", */ "HAL_INIT_STAGES_END", }; int hal_init_profiling_i; u32 hal_init_stages_timestamp[HAL_INIT_STAGES_NUM]; /* used to record the time of each stage's starting point */ for(hal_init_profiling_i=0;hal_init_profiling_ibkeepfwalive) { _ps_open_RF(Adapter); if (pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized){ PHY_IQCalibrate_8188E(Adapter,true); } else { PHY_IQCalibrate_8188E(Adapter,false); pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = true; } ODM_TXPowerTrackingCheck(&pHalData->odmpriv ); PHY_LCCalibrate_8188E(Adapter); goto exit; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PW_ON); status = InitPowerOn_rtl8188eu(Adapter); if (status == _FAIL){ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init power on!\n")); goto exit; } /* Save target channel */ pHalData->CurrentChannel = 6;/* default set to 6 */ if (pwrctrlpriv->reg_rfoff == true){ pwrctrlpriv->rf_pwrstate = rf_off; } /* 2010/08/09 MH We need to check if we need to turnon or off RF after detecting */ /* HW GPIO pin. Before PHY_RFConfig8192C. */ /* HalDetectPwrDownMode(Adapter); */ /* 2010/08/26 MH If Efuse does not support sective suspend then disable the function. */ /* HalDetectSelectiveSuspendMode(Adapter); */ if (!pregistrypriv->wifi_spec) { txpktbuf_bndy = TX_PAGE_BOUNDARY_88E; } else { /* for WMM */ txpktbuf_bndy = WMM_NORMAL_TX_PAGE_BOUNDARY_88E; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC01); _InitQueueReservedPage(Adapter); _InitQueuePriority(Adapter); _InitPageBoundary(Adapter); _InitTransferPageSize(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_DOWNLOAD_FW); #if (MP_DRIVER == 1) if (Adapter->registrypriv.mp_mode == 1) { _InitRxSetting(Adapter); } #endif /* MP_DRIVER == 1 */ status = rtl8188e_FirmwareDownload(Adapter); if (status != _SUCCESS) { DBG_871X("%s: Download Firmware failed!!\n", __FUNCTION__); Adapter->bFWReady = false; pHalData->fw_ractrl = false; return status; } else { RT_TRACE(_module_hci_hal_init_c_, _drv_info_, ("Initializepadapter8192CSdio(): Download Firmware Success!!\n")); Adapter->bFWReady = true; pHalData->fw_ractrl = false; } rtl8188e_InitializeFirmwareVars(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MAC); #if (HAL_MAC_ENABLE == 1) status = PHY_MACConfig8188E(Adapter); if (status == _FAIL) { DBG_871X(" ### Failed to init MAC ......\n "); goto exit; } #endif /* */ /* d. Initialize BB related configurations. */ /* */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_BB); #if (HAL_BB_ENABLE == 1) status = PHY_BBConfig8188E(Adapter); if (status == _FAIL) { DBG_871X(" ### Failed to init BB ......\n "); goto exit; } #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_RF); #if (HAL_RF_ENABLE == 1) status = PHY_RFConfig8188E(Adapter); if (status == _FAIL) { DBG_871X(" ### Failed to init RF ......\n "); goto exit; } #endif HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_EFUSE_PATCH); status = rtl8188e_iol_efuse_patch(Adapter); if (status == _FAIL){ DBG_871X("%s rtl8188e_iol_efuse_patch failed\n",__FUNCTION__); goto exit; } _InitTxBufferBoundary(Adapter, txpktbuf_bndy); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_LLTT); status = InitLLTTable(Adapter, txpktbuf_bndy); if (status == _FAIL){ RT_TRACE(_module_hci_hal_init_c_, _drv_err_, ("Failed to init LLT table\n")); goto exit; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC02); /* Get Rx PHY status in order to report RSSI and others. */ _InitDriverInfoSize(Adapter, DRVINFO_SZ); _InitInterrupt(Adapter); hal_init_macaddr(Adapter);/* set mac_address */ _InitNetworkType(Adapter);/* set msr */ _InitWMACSetting(Adapter); _InitAdaptiveCtrl(Adapter); _InitEDCA(Adapter); _InitRetryFunction(Adapter); InitUsbAggregationSetting(Adapter); _InitOperationMode(Adapter);/* todo */ _InitBeaconParameters(Adapter); _InitBeaconMaxError(Adapter, true); /* */ /* Init CR MACTXEN, MACRXEN after setting RxFF boundary REG_TRXFF_BNDY to patch */ /* Hw bug which Hw initials RxFF boundry size to a value which is larger than the real Rx buffer size in 88E. */ /* */ /* Enable MACTXEN/MACRXEN block */ value16 = rtw_read16(Adapter, REG_CR); value16 |= (MACTXEN | MACRXEN); rtw_write8(Adapter, REG_CR, value16); _InitHardwareDropIncorrectBulkOut(Adapter); if (pHalData->bRDGEnable){ _InitRDGSetting(Adapter); } #if (RATE_ADAPTIVE_SUPPORT==1) /* Enable TX Report */ /* Enable Tx Report Timer */ value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL); rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0)); /* Set MAX RPT MACID */ rtw_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */ /* Tx RPT Timer. Unit: 32us */ rtw_write16(Adapter, REG_TX_RPT_TIME, 0xCdf0); #endif rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0); rtw_write32(Adapter,REG_MACID_NO_LINK_0,0xFFFFFFFF); rtw_write32(Adapter,REG_MACID_NO_LINK_1,0xFFFFFFFF); #ifdef CONFIG_CHECK_AC_LIFETIME /* Enable lifetime check for the four ACs */ rtw_write8(Adapter, REG_LIFETIME_EN, 0x0F); #endif /* CONFIG_CHECK_AC_LIFETIME */ rtw_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ rtw_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */ /* Joseph Note: Keep RfRegChnlVal for later use. */ pHalData->RfRegChnlVal[0] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)0, RF_CHNLBW, bRFRegOffsetMask); pHalData->RfRegChnlVal[1] = PHY_QueryRFReg(Adapter, (RF_RADIO_PATH_E)1, RF_CHNLBW, bRFRegOffsetMask); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_TURN_ON_BLOCK); _BBTurnOnBlock(Adapter); /* NicIFSetMacAddress(padapter, padapter->PermanentAddress); */ HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_SECURITY); invalidate_cam_all(Adapter); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC11); /* 2010/12/17 MH We need to set TX power according to EFUSE content at first. */ PHY_SetTxPowerLevel8188E(Adapter, pHalData->CurrentChannel); /* Move by Neo for USB SS to below setp */ /* _RfPowerSave(Adapter); */ _InitAntenna_Selection(Adapter); /* */ /* Disable BAR, suggested by Scott */ /* 2010.04.09 add by hpfan */ /* */ rtw_write32(Adapter, REG_BAR_MODE_CTRL, 0x0201ffff); /* HW SEQ CTRL */ /* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */ rtw_write8(Adapter,REG_HWSEQ_CTRL, 0xFF); if (pregistrypriv->wifi_spec) rtw_write16(Adapter,REG_FAST_EDCA_CTRL ,0); /* Nav limit , suggest by scott */ rtw_write8(Adapter, 0x652, 0x0); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM); rtl8188e_InitHalDm(Adapter); #if (MP_DRIVER == 1) if (Adapter->registrypriv.mp_mode == 1) { Adapter->mppriv.channel = pHalData->CurrentChannel; MPT_InitializeAdapter(Adapter, Adapter->mppriv.channel); } else #endif /* if (MP_DRIVER == 1) */ { /* */ /* 2010/08/11 MH Merge from 8192SE for Minicard init. We need to confirm current radio status */ /* and then decide to enable RF or not.!!!??? For Selective suspend mode. We may not */ /* call init_adapter. May cause some problem?? */ /* */ /* Fix the bug that Hw/Sw radio off before S3/S4, the RF off action will not be executed */ /* in MgntActSet_RF_State() after wake up, because the value of pHalData->eRFPowerState */ /* is the same as eRfOff, we should change it to eRfOn after we config RF parameters. */ /* Added by tynli. 2010.03.30. */ pwrctrlpriv->rf_pwrstate = rf_on; /* enable Tx report. */ rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F); /* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */ rtw_write8(Adapter, REG_EARLY_MODE_CONTROL+3, 0x01);/* Pretx_en, for WEP/TKIP SEC */ /* tynli_test_tx_report. */ rtw_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0); /* RT_TRACE(COMP_INIT, DBG_TRACE, ("InitializeAdapter8188EUsb() <====\n")); */ /* enable tx DMA to drop the redundate data of packet */ rtw_write16(Adapter,REG_TXDMA_OFFSET_CHK, (rtw_read16(Adapter,REG_TXDMA_OFFSET_CHK) | DROP_DATA_EN)); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_IQK); /* 2010/08/26 MH Merge from 8192CE. */ if (pwrctrlpriv->rf_pwrstate == rf_on) { if (pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized){ PHY_IQCalibrate_8188E(Adapter,true); } else { PHY_IQCalibrate_8188E(Adapter,false); pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = true; } HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_PW_TRACK); ODM_TXPowerTrackingCheck(&pHalData->odmpriv ); HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK); PHY_LCCalibrate_8188E(Adapter); } } /* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); */ /* _InitPABias(Adapter); */ rtw_write8(Adapter, REG_USB_HRPWM, 0); /* ack for xmit mgmt frames. */ rtw_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12)); exit: HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_END); DBG_871X("%s in %dms\n", __FUNCTION__, rtw_get_passing_time_ms(init_start_time)); #ifdef DBG_HAL_INIT_PROFILING hal_init_stages_timestamp[HAL_INIT_STAGES_END]=rtw_get_current_time(); for(hal_init_profiling_i=0;hal_init_profiling_ibFWReady) /* 8051 RAM code */ { /* rtl8723a_FirmwareSelfReset(padapter); */ /* _8051Reset88E(padapter); */ /* Reset MCU 0x2[10]=0. */ val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1); val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */ rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8); } /* MCUFWDL 0x80[1:0]=0 */ /* reset MCU ready status */ rtw_write8(Adapter, REG_MCUFWDL, 0); /* YJ,add,111212 */ /* Disable 32k */ val8 = rtw_read8(Adapter, REG_32K_CTRL); rtw_write8(Adapter, REG_32K_CTRL, val8&(~BIT0)); /* Card disable power action flow */ HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW); /* Reset MCU IO Wrapper */ val8 = rtw_read8(Adapter, REG_RSV_CTRL+1); rtw_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3))); val8 = rtw_read8(Adapter, REG_RSV_CTRL+1); rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3); /* YJ,test add, 111207. For Power Consumption. */ val8 = rtw_read8(Adapter, GPIO_IN); rtw_write8(Adapter, GPIO_OUT, val8); rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */ val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL); /* rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4)|val8); */ rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4)); val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL+1); rtw_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);/* Reg0x43 */ rtw_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */ bMacPwrCtrlOn = false; rtw_hal_set_hwreg(Adapter, HW_VAR_APFM_ON_MAC, &bMacPwrCtrlOn); Adapter->bFWReady = false; } static void rtl8188eu_hw_power_down(struct adapter *padapter) { /* 2010/-8/09 MH For power down module, we need to enable register block contrl reg at 0x1c. */ /* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */ /* Enable register area 0x0-0xc. */ rtw_write8(padapter,REG_RSV_CTRL, 0x0); rtw_write16(padapter, REG_APS_FSMCO, 0x8812); } static u32 rtl8188eu_hal_deinit(struct adapter *Adapter) { struct pwrctrl_priv *pwrctl = adapter_to_pwrctl(Adapter); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); DBG_8192C("==> %s\n",__FUNCTION__); rtw_write32(Adapter, REG_HIMR_88E, IMR_DISABLED_88E); rtw_write32(Adapter, REG_HIMRE_88E, IMR_DISABLED_88E); DBG_8192C("bkeepfwalive(%x)\n", pwrctl->bkeepfwalive); if (pwrctl->bkeepfwalive) { if ((pwrctl->bHWPwrPindetect) && (pwrctl->bHWPowerdown)) rtl8188eu_hw_power_down(Adapter); } else { if (Adapter->hw_init_completed == true){ hal_poweroff_rtl8188eu(Adapter); if ((pwrctl->bHWPwrPindetect ) && (pwrctl->bHWPowerdown)) rtl8188eu_hw_power_down(Adapter); } } return _SUCCESS; } static unsigned int rtl8188eu_inirp_init(struct adapter *Adapter) { u8 i; struct recv_buf *precvbuf; uint status; struct dvobj_priv *pdev= adapter_to_dvobj(Adapter); struct intf_hdl * pintfhdl=&Adapter->iopriv.intf; struct recv_priv *precvpriv = &(Adapter->recvpriv); u32 (*_read_port)(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *pmem); #ifdef CONFIG_USB_INTERRUPT_IN_PIPE HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); u32 (*_read_interrupt)(struct intf_hdl *pintfhdl, u32 addr); #endif ; _read_port = pintfhdl->io_ops._read_port; status = _SUCCESS; RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("===> usb_inirp_init\n")); precvpriv->ff_hwaddr = RECV_BULK_IN_ADDR; /* issue Rx irp to receive data */ precvbuf = (struct recv_buf *)precvpriv->precv_buf; for(i=0; iff_hwaddr, 0, (unsigned char *)precvbuf) == false ) { RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_port error\n")); status = _FAIL; goto exit; } precvbuf++; precvpriv->free_recv_buf_queue_cnt--; } #ifdef CONFIG_USB_INTERRUPT_IN_PIPE if (pHalData->RtIntInPipe != 0x05) { status = _FAIL; DBG_871X("%s =>Warning !! Have not USB Int-IN pipe, pHalData->RtIntInPipe(%d)!!!\n",__FUNCTION__,pHalData->RtIntInPipe); goto exit; } _read_interrupt = pintfhdl->io_ops._read_interrupt; if (_read_interrupt(pintfhdl, RECV_INT_IN_ADDR) == false ) { RT_TRACE(_module_hci_hal_init_c_,_drv_err_,("usb_rx_init: usb_read_interrupt error\n")); status = _FAIL; } #endif exit: RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("<=== usb_inirp_init\n")); ; return status; } static unsigned int rtl8188eu_inirp_deinit(struct adapter *Adapter) { RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n ===> usb_rx_deinit\n")); rtw_read_port_cancel(Adapter); RT_TRACE(_module_hci_hal_init_c_,_drv_info_,("\n <=== usb_rx_deinit\n")); return _SUCCESS; } /* */ /* */ /* EEPROM/EFUSE Content Parsing */ /* */ /* */ static void _ReadIDs( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void _ReadMACAddress( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void _ReadBoardType( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void _ReadLEDSetting( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { struct led_priv *pledpriv = &(Adapter->ledpriv); HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); pledpriv->bRegUseLed = true; switch (pHalData->CustomerID) { default: pledpriv->LedStrategy = SW_LED_MODE1; break; } pHalData->bLedOpenDrain = true;/* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */ } static void _ReadThermalMeter( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void _ReadRFSetting( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void _ReadPROMVersion( struct adapter *Adapter, u8* PROMContent, bool AutoloadFail ) { } static void readAntennaDiversity( struct adapter *pAdapter, u8 *hwinfo, bool AutoLoadFail ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); struct registry_priv *registry_par = &pAdapter->registrypriv; pHalData->AntDivCfg = registry_par->antdiv_cfg ; /* 0:OFF , 1:ON, */ } static void hal_InitPGData( struct adapter *pAdapter, u8 *PROMContent ) { } static void Hal_EfuseParsePIDVID_8188EU( struct adapter * pAdapter, u8* hwinfo, bool AutoLoadFail ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); if ( !AutoLoadFail ) { /* VID, PID */ pHalData->EEPROMVID = EF2BYTE(*(__le16 *)&hwinfo[EEPROM_VID_88EU]); pHalData->EEPROMPID = EF2BYTE(*(__le16 *)&hwinfo[EEPROM_PID_88EU]); /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = *(u8 *)&hwinfo[EEPROM_CUSTOMERID_88E]; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } else { pHalData->EEPROMVID = EEPROM_Default_VID; pHalData->EEPROMPID = EEPROM_Default_PID; /* Customer ID, 0x00 and 0xff are reserved for Realtek. */ pHalData->EEPROMCustomerID = EEPROM_Default_CustomerID; pHalData->EEPROMSubCustomerID = EEPROM_Default_SubCustomerID; } DBG_871X("VID = 0x%04X, PID = 0x%04X\n", pHalData->EEPROMVID, pHalData->EEPROMPID); DBG_871X("Customer ID: 0x%02X, SubCustomer ID: 0x%02X\n", pHalData->EEPROMCustomerID, pHalData->EEPROMSubCustomerID); } static void Hal_EfuseParseMACAddr_8188EU( struct adapter * padapter, u8* hwinfo, bool AutoLoadFail ) { u16 i, usValue; u8 sMacAddr[6] = {0x00, 0xE0, 0x4C, 0x81, 0x88, 0x02}; struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); if (AutoLoadFail) { /* sMacAddr[5] = (u8)GetRandomNumber(1, 254); */ for (i=0; i<6; i++) pEEPROM->mac_addr[i] = sMacAddr[i]; } else { /* Read Permanent MAC address */ memcpy(pEEPROM->mac_addr, &hwinfo[EEPROM_MAC_ADDR_88EU], ETH_ALEN); } /* NicIFSetMacAddress(pAdapter, pAdapter->PermanentAddress); */ RT_TRACE(_module_hci_hal_init_c_, _drv_notice_, ("Hal_EfuseParseMACAddr_8188EU: Permanent Address = %02x-%02x-%02x-%02x-%02x-%02x\n", pEEPROM->mac_addr[0], pEEPROM->mac_addr[1], pEEPROM->mac_addr[2], pEEPROM->mac_addr[3], pEEPROM->mac_addr[4], pEEPROM->mac_addr[5])); } static void Hal_CustomizeByCustomerID_8188EU( struct adapter * padapter ) { } /* Read HW power down mode selection */ static void _ReadPSSetting(struct adapter *Adapter,u8*PROMContent,u8 AutoloadFail) { } static void readAdapterInfo_8188EU( struct adapter *padapter ) { struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter); /* parse the eeprom/efuse content */ Hal_EfuseParseIDCode88E(padapter, pEEPROM->efuse_eeprom_data); Hal_EfuseParsePIDVID_8188EU(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_EfuseParseMACAddr_8188EU(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_ReadPowerSavingMode88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_ReadTxPowerInfo88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_EfuseParseEEPROMVer88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); rtl8188e_EfuseParseChnlPlan(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_EfuseParseXtal_8188E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_EfuseParseCustomerID88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_ReadAntennaDiversity88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_EfuseParseBoardType88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); Hal_ReadThermalMeter_88E(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); /* */ /* The following part initialize some vars by PG info. */ /* */ Hal_InitChannelPlan(padapter); Hal_CustomizeByCustomerID_8188EU(padapter); _ReadLEDSetting(padapter, pEEPROM->efuse_eeprom_data, pEEPROM->bautoload_fail_flag); } static void _ReadPROMContent( struct adapter * Adapter ) { struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(Adapter); u8 eeValue; /* check system boot selection */ eeValue = rtw_read8(Adapter, REG_9346CR); pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false; pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true; DBG_8192C("Boot from %s, Autoload %s !\n", (pEEPROM->EepromOrEfuse ? "EEPROM" : "EFUSE"), (pEEPROM->bautoload_fail_flag ? "Fail" : "OK") ); /* pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */ Hal_InitPGData88E(Adapter); readAdapterInfo_8188EU(Adapter); } static void _ReadRFType( struct adapter *Adapter ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); #if DISABLE_BB_RF pHalData->rf_chip = RF_PSEUDO_11N; #else pHalData->rf_chip = RF_6052; #endif } static int _ReadAdapterInfo8188EU(struct adapter *Adapter) { /* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); */ u32 start=rtw_get_current_time(); MSG_8192C("====> %s\n", __FUNCTION__); /* Efuse_InitSomeVar(Adapter); */ /* if (IS_HARDWARE_TYPE_8723A(Adapter)) */ /* _EfuseCellSel(Adapter); */ _ReadRFType(Adapter);/* rf_chip -> _InitRFType() */ _ReadPROMContent(Adapter); /* MSG_8192C("%s()(done), rf_chip=0x%x, rf_type=0x%x\n", __FUNCTION__, pHalData->rf_chip, pHalData->rf_type); */ MSG_8192C("<==== %s in %d ms\n", __FUNCTION__, rtw_get_passing_time_ms(start)); return _SUCCESS; } static void ReadAdapterInfo8188EU(struct adapter *Adapter) { /* Read EEPROM size before call any EEPROM function */ Adapter->EepromAddressSize = GetEEPROMSize8188E(Adapter); _ReadAdapterInfo8188EU(Adapter); } #define GPIO_DEBUG_PORT_NUM 0 static void rtl8192cu_trigger_gpio_0(struct adapter *padapter) { #ifdef CONFIG_USB_SUPPORT_ASYNC_VDN_REQ u32 gpioctrl; DBG_8192C("==> trigger_gpio_0...\n"); rtw_write16_async(padapter,REG_GPIO_PIN_CTRL,0); rtw_write8_async(padapter,REG_GPIO_PIN_CTRL+2,0xFF); gpioctrl = (BIT(GPIO_DEBUG_PORT_NUM)<<24 )|(BIT(GPIO_DEBUG_PORT_NUM)<<16); rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl); gpioctrl |= (BIT(GPIO_DEBUG_PORT_NUM)<<8); rtw_write32_async(padapter,REG_GPIO_PIN_CTRL,gpioctrl); DBG_8192C("<=== trigger_gpio_0...\n"); #endif } static void ResumeTxBeacon(struct adapter *padapter) { HAL_DATA_TYPE* pHalData = GET_HAL_DATA(padapter); /* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ /* which should be read from register to a global variable. */ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) | BIT6); pHalData->RegFwHwTxQCtrl |= BIT6; rtw_write8(padapter, REG_TBTT_PROHIBIT+1, 0xff); pHalData->RegReg542 |= BIT0; rtw_write8(padapter, REG_TBTT_PROHIBIT+2, pHalData->RegReg542); } static void UpdateInterruptMask8188EU(struct adapter *padapter,u8 bHIMR0 ,u32 AddMSR, u32 RemoveMSR) { HAL_DATA_TYPE *pHalData; u32 *himr; pHalData = GET_HAL_DATA(padapter); if (bHIMR0) himr = &(pHalData->IntrMask[0]); else himr = &(pHalData->IntrMask[1]); if (AddMSR) *himr |= AddMSR; if (RemoveMSR) *himr &= (~RemoveMSR); if (bHIMR0) rtw_write32(padapter, REG_HIMR_88E, *himr); else rtw_write32(padapter, REG_HIMRE_88E, *himr); } static void StopTxBeacon(struct adapter *padapter) { HAL_DATA_TYPE* pHalData = GET_HAL_DATA(padapter); /* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */ /* which should be read from register to a global variable. */ rtw_write8(padapter, REG_FWHW_TXQ_CTRL+2, (pHalData->RegFwHwTxQCtrl) & (~BIT6)); pHalData->RegFwHwTxQCtrl &= (~BIT6); rtw_write8(padapter, REG_TBTT_PROHIBIT+1, 0x64); pHalData->RegReg542 &= ~(BIT0); rtw_write8(padapter, REG_TBTT_PROHIBIT+2, pHalData->RegReg542); } static void hw_var_set_opmode(struct adapter *Adapter, u8 variable, u8* val) { u8 val8; u8 mode = *((u8 *)val); /* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); */ { /* disable Port0 TSF update */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); /* set net_type */ val8 = rtw_read8(Adapter, MSR)&0x0c; val8 |= mode; rtw_write8(Adapter, MSR, val8); DBG_871X("%s()-%d mode = %d\n", __FUNCTION__, __LINE__, mode); if ((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) { StopTxBeacon(Adapter); rtw_write8(Adapter,REG_BCN_CTRL, 0x19);/* disable atim wnd */ } else if ((mode == _HW_STATE_ADHOC_) /*|| (mode == _HW_STATE_AP_)*/) { ResumeTxBeacon(Adapter); rtw_write8(Adapter,REG_BCN_CTRL, 0x1a); /* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */ rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM)|BIT(3)|BIT(4)); } else if (mode == _HW_STATE_AP_) { ResumeTxBeacon(Adapter); rtw_write8(Adapter, REG_BCN_CTRL, 0x12); /* Set RCR */ rtw_write32(Adapter, REG_RCR, 0x7000208e);/* CBSSID_DATA must set to 0,reject ICV_ERR packet */ /* enable to rx data frame */ rtw_write16(Adapter, REG_RXFLTMAP2, 0xFFFF); /* enable to rx ps-poll */ rtw_write16(Adapter, REG_RXFLTMAP1, 0x0400); /* Beacon Control related register for first time */ rtw_write8(Adapter, REG_BCNDMATIM, 0x02); /* 2ms */ /* rtw_write8(Adapter, REG_BCN_MAX_ERR, 0xFF); */ rtw_write8(Adapter, REG_ATIMWND, 0x0a); /* 10ms */ rtw_write16(Adapter, REG_BCNTCFG, 0x00); rtw_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04); rtw_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);/* +32767 (~32ms) */ /* reset TSF */ rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0)); /* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */ rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM)|BIT(3)|BIT(4)); /* enable BCN0 Function for if1 */ /* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */ rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION |BIT(1))); /* dis BCN1 ATIM WND if if2 is station */ rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1)|BIT(0)); #ifdef CONFIG_TSF_RESET_OFFLOAD /* Reset TSF for STA+AP concurrent mode */ if ( check_buddy_fwstate(Adapter, (WIFI_STATION_STATE|WIFI_ASOC_STATE)) ) { if (reset_tsf(Adapter, IFACE_PORT0) == false) DBG_871X("ERROR! %s()-%d: Reset port0 TSF fail\n", __FUNCTION__, __LINE__); } #endif /* CONFIG_TSF_RESET_OFFLOAD */ } } } static void hw_var_set_macaddr(struct adapter *Adapter, u8 variable, u8* val) { u8 idx = 0; u32 reg_macid; reg_macid = REG_MACID; for(idx = 0 ; idx < 6; idx++) rtw_write8(Adapter, (reg_macid+idx), val[idx]); } static void hw_var_set_bssid(struct adapter *Adapter, u8 variable, u8* val) { u8 idx = 0; u32 reg_bssid; reg_bssid = REG_BSSID; for(idx = 0 ; idx < 6; idx++) rtw_write8(Adapter, (reg_bssid+idx), val[idx]); } static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8* val) { u32 bcn_ctrl_reg; bcn_ctrl_reg = REG_BCN_CTRL; if (*((u8 *)val)) rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT)); else rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT))); } static void hw_var_set_correct_tsf(struct adapter *Adapter, u8 variable, u8* val) { } static void hw_var_set_mlme_disconnect(struct adapter *Adapter, u8 variable, u8* val) { } static void hw_var_set_mlme_sitesurvey(struct adapter *Adapter, u8 variable, u8* val) { } static void hw_var_set_mlme_join(struct adapter *Adapter, u8 variable, u8* val) { } static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8* val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; DM_ODM_T *podmpriv = &pHalData->odmpriv; ; switch (variable) { case HW_VAR_MEDIA_STATUS: { u8 val8; val8 = rtw_read8(Adapter, MSR)&0x0c; val8 |= *((u8 *)val); rtw_write8(Adapter, MSR, val8); } break; case HW_VAR_MEDIA_STATUS1: { u8 val8; val8 = rtw_read8(Adapter, MSR)&0x03; val8 |= *((u8 *)val) <<2; rtw_write8(Adapter, MSR, val8); } break; case HW_VAR_SET_OPMODE: hw_var_set_opmode(Adapter, variable, val); break; case HW_VAR_MAC_ADDR: hw_var_set_macaddr(Adapter, variable, val); break; case HW_VAR_BSSID: hw_var_set_bssid(Adapter, variable, val); break; case HW_VAR_BASIC_RATE: { u16 BrateCfg = 0; u8 RateIndex = 0; /* 2007.01.16, by Emily */ /* Select RRSR (in Legacy-OFDM and CCK) */ /* For 8190, we select only 24M, 12M, 6M, 11M, 5.5M, 2M, and 1M from the Basic rate. */ /* We do not use other rates. */ HalSetBrateCfg( Adapter, val, &BrateCfg ); DBG_8192C("HW_VAR_BASIC_RATE: BrateCfg(%#x)\n", BrateCfg); /* 2011.03.30 add by Luke Lee */ /* CCK 2M ACK should be disabled for some BCM and Atheros AP IOT */ /* because CCK 2M has poor TXEVM */ /* CCK 5.5M & 11M ACK should be enabled for better performance */ pHalData->BasicRateSet = BrateCfg = (BrateCfg |0xd) & 0x15d; BrateCfg |= 0x01; /* default enable 1M ACK rate */ /* Set RRSR rate table. */ rtw_write8(Adapter, REG_RRSR, BrateCfg&0xff); rtw_write8(Adapter, REG_RRSR+1, (BrateCfg>>8)&0xff); rtw_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0); /* Set RTS initial rate */ while (BrateCfg > 0x1) { BrateCfg = (BrateCfg>> 1); RateIndex++; } /* Ziv - Check */ rtw_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex); } break; case HW_VAR_TXPAUSE: rtw_write8(Adapter, REG_TXPAUSE, *((u8 *)val)); break; case HW_VAR_BCN_FUNC: hw_var_set_bcn_func(Adapter, variable, val); break; case HW_VAR_CORRECT_TSF: { u64 tsf; struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); tsf = pmlmeext->TSFValue - rtw_modular64(pmlmeext->TSFValue, (pmlmeinfo->bcn_interval*1024)) -1024; /* us */ if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) { /* pHalData->RegTxPause |= STOP_BCNQ;BIT(6) */ /* rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)|BIT(6))); */ StopTxBeacon(Adapter); } /* disable related TSF function */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3))); rtw_write32(Adapter, REG_TSFTR, tsf); rtw_write32(Adapter, REG_TSFTR+4, tsf>>32); /* enable related TSF function */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3)); if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE)) { /* pHalData->RegTxPause &= (~STOP_BCNQ); */ /* rtw_write8(Adapter, REG_TXPAUSE, (rtw_read8(Adapter, REG_TXPAUSE)&(~BIT(6)))); */ ResumeTxBeacon(Adapter); } } break; case HW_VAR_CHECK_BSSID: if (*((u8 *)val)) { rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN); } else { u32 val32; val32 = rtw_read32(Adapter, REG_RCR); val32 &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN); rtw_write32(Adapter, REG_RCR, val32); } break; case HW_VAR_MLME_DISCONNECT: { /* Set RCR to not to receive data frame when NO LINK state */ /* rtw_write32(Adapter, REG_RCR, rtw_read32(padapter, REG_RCR) & ~RCR_ADF); */ /* reject all data frames */ rtw_write16(Adapter, REG_RXFLTMAP2,0x00); /* reset TSF */ rtw_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1))); /* disable update TSF */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); } break; case HW_VAR_MLME_SITESURVEY: if (*((u8 *)val))/* under sitesurvey */ { /* config RCR to receive different BSSID & not to receive data frame */ u32 v = rtw_read32(Adapter, REG_RCR); v &= ~(RCR_CBSSID_BCN); rtw_write32(Adapter, REG_RCR, v); /* reject all data frame */ rtw_write16(Adapter, REG_RXFLTMAP2,0x00); /* disable update TSF */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4)); } else/* sitesurvey done */ { struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); if ((is_client_associated_to_ap(Adapter) == true) || ((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) ) { /* enable to rx data frame */ /* rtw_write32(Adapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF); */ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); /* enable update TSF */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); } else if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) { /* rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_ADF); */ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); /* enable update TSF */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); } if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN); else { if (Adapter->in_cta_test) { u32 v = rtw_read32(Adapter, REG_RCR); v &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN );/* RCR_ADF */ rtw_write32(Adapter, REG_RCR, v); } else { rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN); } } } break; case HW_VAR_MLME_JOIN: { u8 RetryLimit = 0x30; u8 type = *((u8 *)val); struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; if (type == 0) /* prepare to join */ { /* enable to rx data frame.Accept all data frame */ /* rtw_write32(padapter, REG_RCR, rtw_read32(padapter, REG_RCR)|RCR_ADF); */ rtw_write16(Adapter, REG_RXFLTMAP2,0xFFFF); if (Adapter->in_cta_test) { u32 v = rtw_read32(Adapter, REG_RCR); v &= ~(RCR_CBSSID_DATA | RCR_CBSSID_BCN );/* RCR_ADF */ rtw_write32(Adapter, REG_RCR, v); } else { rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_DATA|RCR_CBSSID_BCN); } if (check_fwstate(pmlmepriv, WIFI_STATION_STATE) == true) { RetryLimit = (pHalData->CustomerID == RT_CID_CCX) ? 7 : 48; } else /* Ad-hoc Mode */ { RetryLimit = 0x7; } } else if (type == 1) /* joinbss_event call back when join res < 0 */ { rtw_write16(Adapter, REG_RXFLTMAP2,0x00); } else if (type == 2) /* sta add event call back */ { /* enable update TSF */ rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4))); if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE)) { RetryLimit = 0x7; } } rtw_write16(Adapter, REG_RL, RetryLimit << RETRY_LIMIT_SHORT_SHIFT | RetryLimit << RETRY_LIMIT_LONG_SHIFT); } break; case HW_VAR_ON_RCR_AM: rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_AM); DBG_871X("%s, %d, RCR= %x\n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR)); break; case HW_VAR_OFF_RCR_AM: rtw_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)& (~RCR_AM)); DBG_871X("%s, %d, RCR= %x\n", __FUNCTION__,__LINE__, rtw_read32(Adapter, REG_RCR)); break; case HW_VAR_BEACON_INTERVAL: rtw_write16(Adapter, REG_BCN_INTERVAL, *((u16 *)val)); break; case HW_VAR_SLOT_TIME: { u8 u1bAIFS, aSifsTime; struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); rtw_write8(Adapter, REG_SLOT, val[0]); if (pmlmeinfo->WMM_enable == 0) { if ( pmlmeext->cur_wireless_mode == WIRELESS_11B) aSifsTime = 10; else aSifsTime = 16; u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime); /* Temporary removed, 2008.06.20. */ rtw_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS); rtw_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS); rtw_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS); rtw_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS); } } break; case HW_VAR_RESP_SIFS: /* SIFS_Timer = 0x0a0a0808; */ /* RESP_SIFS for CCK */ rtw_write8(Adapter, REG_R2T_SIFS, val[0]); /* SIFS_T2T_CCK (0x08) */ rtw_write8(Adapter, REG_R2T_SIFS+1, val[1]); /* SIFS_R2T_CCK(0x08) */ /* RESP_SIFS for OFDM */ rtw_write8(Adapter, REG_T2T_SIFS, val[2]); /* SIFS_T2T_OFDM (0x0a) */ rtw_write8(Adapter, REG_T2T_SIFS+1, val[3]); /* SIFS_R2T_OFDM(0x0a) */ break; case HW_VAR_ACK_PREAMBLE: { u8 regTmp; u8 bShortPreamble = *( (bool *)val ); /* Joseph marked out for Netgear 3500 TKIP channel 7 issue.(Temporarily) */ regTmp = (pHalData->nCur40MhzPrimeSC)<<5; /* regTmp = 0; */ if (bShortPreamble) regTmp |= 0x80; rtw_write8(Adapter, REG_RRSR+2, regTmp); } break; case HW_VAR_SEC_CFG: rtw_write8(Adapter, REG_SECCFG, *((u8 *)val)); break; case HW_VAR_DM_FLAG: podmpriv->SupportAbility = *((u8 *)val); /* DBG_871X("HW_VAR_DM_FLAG ==> SupportAbility:0x%08x\n",podmpriv->SupportAbility ); */ break; case HW_VAR_DM_FUNC_OP: if (val[0]) {/* save dm flag */ podmpriv->BK_SupportAbility = podmpriv->SupportAbility; } else {/* restore dm flag */ podmpriv->SupportAbility = podmpriv->BK_SupportAbility; } /* DBG_871X("HW_VAR_DM_FUNC_OP ==> %s SupportAbility:0x%08x\n", */ /* (val[0]==1)?"Save":"Restore", */ /* podmpriv->SupportAbility */ /* ); */ break; case HW_VAR_DM_FUNC_SET: if (*((u32 *)val) == DYNAMIC_ALL_FUNC_ENABLE){ pdmpriv->DMFlag = pdmpriv->InitDMFlag; podmpriv->SupportAbility = pdmpriv->InitODMFlag; } else{ podmpriv->SupportAbility |= *((u32 *)val); } /* DBG_871X("HW_VAR_DM_FUNC_SET ==> SupportAbility:0x%08x\n",podmpriv->SupportAbility ); */ break; case HW_VAR_DM_FUNC_CLR: podmpriv->SupportAbility &= *((u32 *)val); break; case HW_VAR_CAM_EMPTY_ENTRY: { u8 ucIndex = *((u8 *)val); u8 i; u32 ulCommand=0; u32 ulContent=0; u32 ulEncAlgo=CAM_AES; for(i=0;iAcParam_BE = ((u32 *)(val))[0]; rtw_write32(Adapter, REG_EDCA_BE_PARAM, ((u32 *)(val))[0]); break; case HW_VAR_AC_PARAM_BK: rtw_write32(Adapter, REG_EDCA_BK_PARAM, ((u32 *)(val))[0]); break; case HW_VAR_ACM_CTRL: { u8 acm_ctrl = *((u8 *)val); u8 AcmCtrl = rtw_read8( Adapter, REG_ACMHWCTRL); if (acm_ctrl > 1) AcmCtrl = AcmCtrl | 0x1; if (acm_ctrl & BIT(3)) AcmCtrl |= AcmHw_VoqEn; else AcmCtrl &= (~AcmHw_VoqEn); if (acm_ctrl & BIT(2)) AcmCtrl |= AcmHw_ViqEn; else AcmCtrl &= (~AcmHw_ViqEn); if (acm_ctrl & BIT(1)) AcmCtrl |= AcmHw_BeqEn; else AcmCtrl &= (~AcmHw_BeqEn); DBG_871X("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl ); rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl ); } break; case HW_VAR_AMPDU_MIN_SPACE: { u8 MinSpacingToSet; u8 SecMinSpace; MinSpacingToSet = *((u8 *)val); if (MinSpacingToSet <= 7) { switch (Adapter->securitypriv.dot11PrivacyAlgrthm) { case _NO_PRIVACY_: case _AES_: SecMinSpace = 0; break; case _WEP40_: case _WEP104_: case _TKIP_: case _TKIP_WTMIC_: SecMinSpace = 6; break; default: SecMinSpace = 7; break; } if (MinSpacingToSet < SecMinSpace){ MinSpacingToSet = SecMinSpace; } /* RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_MIN_SPACE: %#x\n", Adapter->MgntInfo.MinSpaceCfg)); */ rtw_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet); } } break; case HW_VAR_AMPDU_FACTOR: { u8 RegToSet_Normal[4]={0x41,0xa8,0x72, 0xb9}; u8 RegToSet_BT[4]={0x31,0x74,0x42, 0x97}; u8 FactorToSet; u8 *pRegToSet; u8 index = 0; #ifdef CONFIG_BT_COEXIST if ( (pHalData->bt_coexist.BT_Coexist) && (pHalData->bt_coexist.BT_CoexistType == BT_CSR_BC4) ) pRegToSet = RegToSet_BT; /* 0x97427431; */ else #endif pRegToSet = RegToSet_Normal; /* 0xb972a841; */ FactorToSet = *((u8 *)val); if (FactorToSet <= 3) { FactorToSet = (1<<(FactorToSet + 2)); if (FactorToSet>0xf) FactorToSet = 0xf; for(index=0; index<4; index++) { if ((pRegToSet[index] & 0xf0) > (FactorToSet<<4)) pRegToSet[index] = (pRegToSet[index] & 0x0f) | (FactorToSet<<4); if ((pRegToSet[index] & 0x0f) > FactorToSet) pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet); rtw_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]); } /* RT_TRACE(COMP_MLME, DBG_LOUD, ("Set HW_VAR_AMPDU_FACTOR: %#x\n", FactorToSet)); */ } } break; case HW_VAR_RXDMA_AGG_PG_TH: { u8 threshold = *((u8 *)val); if ( threshold == 0) { threshold = pHalData->UsbRxAggPageCount; } rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold); } break; case HW_VAR_SET_RPWM: break; case HW_VAR_H2C_FW_PWRMODE: { u8 psmode = (*(u8 *)val); /* Forece leave RF low power mode for 1T1R to prevent conficting setting in Fw power */ /* saving sequence. 2010.06.07. Added by tynli. Suggested by SD3 yschang. */ if ( (psmode != PS_MODE_ACTIVE) && (!IS_92C_SERIAL(pHalData->VersionID))) { ODM_RF_Saving(podmpriv, true); } rtl8188e_set_FwPwrMode_cmd(Adapter, psmode); } break; case HW_VAR_H2C_FW_JOINBSSRPT: { u8 mstatus = (*(u8 *)val); rtl8188e_set_FwJoinBssReport_cmd(Adapter, mstatus); } break; #ifdef CONFIG_P2P case HW_VAR_H2C_FW_P2P_PS_OFFLOAD: { u8 p2p_ps_state = (*(u8 *)val); rtl8188e_set_p2p_ps_offload_cmd(Adapter, p2p_ps_state); } break; #endif /* CONFIG_P2P */ case HW_VAR_INITIAL_GAIN: { DIG_T *pDigTable = &podmpriv->DM_DigTable; u32 rx_gain = ((u32 *)(val))[0]; if (rx_gain == 0xff){/* restore rx gain */ ODM_Write_DIG(podmpriv,pDigTable->BackupIGValue); } else{ pDigTable->BackupIGValue = pDigTable->CurIGValue; ODM_Write_DIG(podmpriv,rx_gain); } } break; case HW_VAR_TRIGGER_GPIO_0: rtl8192cu_trigger_gpio_0(Adapter); break; #ifdef CONFIG_BT_COEXIST case HW_VAR_BT_SET_COEXIST: { u8 bStart = (*(u8 *)val); rtl8192c_set_dm_bt_coexist(Adapter, bStart); } break; case HW_VAR_BT_ISSUE_DELBA: { u8 dir = (*(u8 *)val); rtl8192c_issue_delete_ba(Adapter, dir); } break; #endif #if (RATE_ADAPTIVE_SUPPORT==1) case HW_VAR_RPT_TIMER_SETTING: { u16 min_rpt_time = (*(u16 *)val); ODM_RA_Set_TxRPT_Time(podmpriv,min_rpt_time); } break; #endif case HW_VAR_ANTENNA_DIVERSITY_SELECT: { u8 Optimum_antenna = (*(u8 *)val); u8 Ant ; /* switch antenna to Optimum_antenna */ /* DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B"); */ if (pHalData->CurAntenna != Optimum_antenna) { Ant = (Optimum_antenna==2)?MAIN_ANT:AUX_ANT; ODM_UpdateRxIdleAnt_88E(&pHalData->odmpriv, Ant); pHalData->CurAntenna = Optimum_antenna ; /* DBG_8192C("==> HW_VAR_ANTENNA_DIVERSITY_SELECT , Ant_(%s)\n",(Optimum_antenna==2)?"A":"B"); */ } } break; case HW_VAR_EFUSE_BYTES: /* To set EFUE total used bytes, added by Roger, 2008.12.22. */ pHalData->EfuseUsedBytes = *((u16 *)val); break; case HW_VAR_FIFO_CLEARN_UP: { struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(Adapter); u8 trycnt = 100; /* pause tx */ rtw_write8(Adapter,REG_TXPAUSE,0xff); /* keep sn */ Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter,REG_NQOS_SEQ); if (pwrpriv->bkeepfwalive != true) { /* RX DMA stop */ rtw_write32(Adapter,REG_RXPKT_NUM,(rtw_read32(Adapter,REG_RXPKT_NUM)|RW_RELEASE_EN)); do{ if (!(rtw_read32(Adapter,REG_RXPKT_NUM)&RXDMA_IDLE)) break; }while (trycnt--); if (trycnt ==0) DBG_8192C("Stop RX DMA failed......\n"); /* RQPN Load 0 */ rtw_write16(Adapter,REG_RQPN_NPQ,0x0); rtw_write32(Adapter,REG_RQPN,0x80000000); rtw_mdelay_os(10); } } break; case HW_VAR_CHECK_TXBUF: break; case HW_VAR_APFM_ON_MAC: pHalData->bMacPwrCtrlOn = *val; DBG_871X("%s: bMacPwrCtrlOn=%d\n", __func__, pHalData->bMacPwrCtrlOn); break; #if (RATE_ADAPTIVE_SUPPORT == 1) case HW_VAR_TX_RPT_MAX_MACID: { u8 maxMacid = *val; DBG_871X("### MacID(%d),Set Max Tx RPT MID(%d)\n",maxMacid,maxMacid+1); rtw_write8(Adapter, REG_TX_RPT_CTRL+1, maxMacid+1); } break; #endif case HW_VAR_H2C_MEDIA_STATUS_RPT: { rtl8188e_set_FwMediaStatus_cmd(Adapter, (*(__le16 *)val)); } break; case HW_VAR_BCN_VALID: /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */ rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0); break; default: break; } ; } static void GetHwReg8188EU(struct adapter *Adapter, u8 variable, u8* val) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); DM_ODM_T *podmpriv = &pHalData->odmpriv; ; switch (variable) { case HW_VAR_BASIC_RATE: *((u16 *)(val)) = pHalData->BasicRateSet; case HW_VAR_TXPAUSE: val[0] = rtw_read8(Adapter, REG_TXPAUSE); break; case HW_VAR_BCN_VALID: /* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2 */ val[0] = (BIT0 & rtw_read8(Adapter, REG_TDECTRL+2))?true:false; break; case HW_VAR_DM_FLAG: val[0] = podmpriv->SupportAbility; break; case HW_VAR_RF_TYPE: val[0] = pHalData->rf_type; break; case HW_VAR_FWLPS_RF_ON: { /* When we halt NIC, we should check if FW LPS is leave. */ if (adapter_to_pwrctl(Adapter)->rf_pwrstate == rf_off) { /* If it is in HW/SW Radio OFF or IPS state, we do not check Fw LPS Leave, */ /* because Fw is unload. */ val[0] = true; } else { u32 valRCR; valRCR = rtw_read32(Adapter, REG_RCR); valRCR &= 0x00070000; if (valRCR) val[0] = false; else val[0] = true; } } break; case HW_VAR_CURRENT_ANTENNA: val[0] = pHalData->CurAntenna; break; case HW_VAR_EFUSE_BYTES: /* To get EFUE total used bytes, added by Roger, 2008.12.22. */ *((u16 *)(val)) = pHalData->EfuseUsedBytes; break; case HW_VAR_APFM_ON_MAC: *val = pHalData->bMacPwrCtrlOn; break; case HW_VAR_CHK_HI_QUEUE_EMPTY: *val = ((rtw_read32(Adapter, REG_HGQ_INFORMATION)&0x0000ff00)==0) ? true:false; break; case HW_VAR_READ_LLT_TAB: Read_LLT_Tab(Adapter); break; case HW_VAR_GET_CPWM: break; case HW_VAR_C2HEVT_CLEAR: *val = rtw_read8(Adapter, REG_C2HEVT_CLEAR); break; case HW_VAR_C2HEVT_MSG_NORMAL: *val = rtw_read8(Adapter, REG_C2HEVT_MSG_NORMAL); break; default: break; } ; } /* */ /* Description: */ /* Query setting of specified variable. */ /* */ static u8 GetHalDefVar8188EUsb( struct adapter * Adapter, enum HAL_DEF_VARIABLE eVariable, void * pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; DM_ODM_T *podmpriv = &pHalData->odmpriv; u8 bResult = _SUCCESS; switch (eVariable) { case HAL_DEF_UNDERCORATEDSMOOTHEDPWDB: { struct mlme_priv *pmlmepriv = &Adapter->mlmepriv; struct sta_priv * pstapriv = &Adapter->stapriv; struct sta_info * psta; psta = rtw_get_stainfo(pstapriv, pmlmepriv->cur_network.network.MacAddress); if (psta) { *((int *)pValue) = psta->rssi_stat.UndecoratedSmoothedPWDB; } } break; case HAL_DEF_IS_SUPPORT_ANT_DIV: *((u8 *)pValue) = (pHalData->AntDivCfg==0)?false:true; break; case HAL_DEF_CURRENT_ANTENNA: *(( u8*)pValue) = pHalData->CurAntenna; break; case HAL_DEF_DRVINFO_SZ: *(( u32*)pValue) = DRVINFO_SZ; break; case HAL_DEF_MAX_RECVBUF_SZ: *(( u32*)pValue) = MAX_RECVBUF_SZ; break; case HAL_DEF_RX_PACKET_OFFSET: *(( u32*)pValue) = RXDESC_SIZE + DRVINFO_SZ; break; #if (RATE_ADAPTIVE_SUPPORT == 1) case HAL_DEF_RA_DECISION_RATE: { u8 MacID = *((u8*)pValue); *((u8*)pValue) = ODM_RA_GetDecisionRate_8188E(podmpriv, MacID); } break; case HAL_DEF_RA_SGI: { u8 MacID = *((u8*)pValue); *((u8*)pValue) = ODM_RA_GetShortGI_8188E(podmpriv, MacID); } break; #endif case HAL_DEF_PT_PWR_STATUS: #if (POWER_TRAINING_ACTIVE==1) { u8 MacID = *((u8*)pValue); *((u8*)pValue) = ODM_RA_GetHwPwrStatus_8188E(podmpriv, MacID); } #endif/* POWER_TRAINING_ACTIVE==1) */ break; case HW_VAR_MAX_RX_AMPDU_FACTOR: *(( u32*)pValue) = MAX_AMPDU_FACTOR_64K; break; case HW_DEF_RA_INFO_DUMP: #if (RATE_ADAPTIVE_SUPPORT == 1) { u8 entry_id = *((u8*)pValue); u8 i; u8 bLinked = false; /* if (check_fwstate(&Adapter->mlmepriv, _FW_LINKED)== true) */ if (rtw_linked_check(Adapter)) bLinked = true; if (bLinked){ DBG_871X("============ RA status check ===================\n"); if (Adapter->bRxRSSIDisplay >30) Adapter->bRxRSSIDisplay = 1; for(i=0;i< Adapter->bRxRSSIDisplay;i++){ DBG_8192C("Mac_id:%d ,RSSI:%d,RateID = %d,RAUseRate = 0x%08x,RateSGI = %d, DecisionRate = 0x%02x ,PTStage = %d, RetryOver drop:%d, LifeTimeOver drop:%d\n", i, podmpriv->RAInfo[i].RssiStaRA, podmpriv->RAInfo[i].RateID, podmpriv->RAInfo[i].RAUseRate, podmpriv->RAInfo[i].RateSGI, podmpriv->RAInfo[i].DecisionRate, podmpriv->RAInfo[i].PTStage, podmpriv->RAInfo[i].DROP, podmpriv->RAInfo[i].DROP1 ); } } } #endif /* RATE_ADAPTIVE_SUPPORT == 1) */ break; case HAL_DEF_DBG_DUMP_RXPKT: *(( u8*)pValue) = pHalData->bDumpRxPkt; break; case HAL_DEF_DBG_DUMP_TXPKT: *(( u8*)pValue) = pHalData->bDumpTxPkt; break; default: bResult = GetHalDefVar(Adapter, eVariable, pValue); break; } return bResult; } /* */ /* Description: */ /* Change default setting of specified variable. */ /* */ static u8 SetHalDefVar8188EUsb( struct adapter * Adapter, enum HAL_DEF_VARIABLE eVariable, void * pValue ) { HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; DM_ODM_T *podmpriv = &pHalData->odmpriv; u8 bResult = _SUCCESS; switch (eVariable) { case HAL_DEF_DBG_DM_FUNC: { u8 dm_func = *(( u8*)pValue); if (dm_func == 0){ /* disable all dynamic func */ podmpriv->SupportAbility = DYNAMIC_FUNC_DISABLE; DBG_8192C("==> Disable all dynamic function...\n"); } else if (dm_func == 1){/* disable DIG */ podmpriv->SupportAbility &= (~DYNAMIC_BB_DIG); DBG_8192C("==> Disable DIG...\n"); } else if (dm_func == 2){/* disable High power */ podmpriv->SupportAbility &= (~DYNAMIC_BB_DYNAMIC_TXPWR); } else if (dm_func == 3){/* disable tx power tracking */ podmpriv->SupportAbility &= (~DYNAMIC_RF_CALIBRATION); DBG_8192C("==> Disable tx power tracking...\n"); } else if (dm_func == 5){/* disable antenna diversity */ podmpriv->SupportAbility &= (~DYNAMIC_BB_ANT_DIV); } else if (dm_func == 6){/* turn on all dynamic func */ if (!(podmpriv->SupportAbility & DYNAMIC_BB_DIG)) { DIG_T *pDigTable = &podmpriv->DM_DigTable; pDigTable->CurIGValue= rtw_read8(Adapter,0xc50); } /* pdmpriv->DMFlag |= DYNAMIC_FUNC_BT; */ podmpriv->SupportAbility = DYNAMIC_ALL_FUNC_ENABLE; DBG_8192C("==> Turn on all dynamic function...\n"); } } break; case HAL_DEF_DBG_DUMP_RXPKT: pHalData->bDumpRxPkt = *(( u8*)pValue); break; case HAL_DEF_DBG_DUMP_TXPKT: pHalData->bDumpTxPkt = *(( u8*)pValue); break; default: bResult = SetHalDefVar(Adapter, eVariable, pValue); break; } return bResult; } static void _update_response_rate(struct adapter *padapter,unsigned int mask) { u8 RateIndex = 0; /* Set RRSR rate table. */ rtw_write8(padapter, REG_RRSR, mask&0xff); rtw_write8(padapter,REG_RRSR+1, (mask>>8)&0xff); /* Set RTS initial rate */ while (mask > 0x1) { mask = (mask>> 1); RateIndex++; } rtw_write8(padapter, REG_INIRTS_RATE_SEL, RateIndex); } static void UpdateHalRAMask8188EUsb(struct adapter *padapter, u32 mac_id, u8 rssi_level) { /* volatile unsigned int result; */ u8 init_rate=0; u8 networkType, raid; u32 mask,rate_bitmap; u8 shortGIrate = false; int supportRateNum = 0; struct sta_info *psta; HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter); /* struct dm_priv *pdmpriv = &pHalData->dmpriv; */ struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv; struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); struct wlan_bssid_ex *cur_network = &(pmlmeinfo->network); if (mac_id >= NUM_STA) /* CAM_SIZE */ { return; } psta = pmlmeinfo->FW_sta_info[mac_id].psta; if (psta == NULL) { return; } switch (mac_id) { case 0:/* for infra mode */ supportRateNum = rtw_get_rateset_len(cur_network->SupportedRates); networkType = judge_network_type(padapter, cur_network->SupportedRates, supportRateNum) & 0xf; /* pmlmeext->cur_wireless_mode = networkType; */ raid = networktype_to_raid(networkType); mask = update_supported_rate(cur_network->SupportedRates, supportRateNum); mask |= (pmlmeinfo->HT_enable)? update_MSC_rate(&(pmlmeinfo->HT_caps)): 0; if (support_short_GI(padapter, &(pmlmeinfo->HT_caps))) { shortGIrate = true; } break; case 1:/* for broadcast/multicast */ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates); if (pmlmeext->cur_wireless_mode & WIRELESS_11B) networkType = WIRELESS_11B; else networkType = WIRELESS_11G; raid = networktype_to_raid(networkType); mask = update_basic_rate(cur_network->SupportedRates, supportRateNum); break; default: /* for each sta in IBSS */ supportRateNum = rtw_get_rateset_len(pmlmeinfo->FW_sta_info[mac_id].SupportedRates); networkType = judge_network_type(padapter, pmlmeinfo->FW_sta_info[mac_id].SupportedRates, supportRateNum) & 0xf; /* pmlmeext->cur_wireless_mode = networkType; */ raid = networktype_to_raid(networkType); mask = update_supported_rate(cur_network->SupportedRates, supportRateNum); /* todo: support HT in IBSS */ break; } rate_bitmap = ODM_Get_Rate_Bitmap(&pHalData->odmpriv,mac_id,mask,rssi_level); pr_info("%s => mac_id:%d, networkType:0x%02x, mask:0x%08x\n\t ==> rssi_level:%d, rate_bitmap:0x%08x\n", __FUNCTION__,mac_id,networkType,mask,rssi_level,rate_bitmap); mask &= rate_bitmap; init_rate = get_highest_rate_idx(mask)&0x3f; if (pHalData->fw_ractrl == true) { u8 arg = 0; arg = mac_id&0x1f;/* MACID */ arg |= BIT(7); if (shortGIrate==true) arg |= BIT(5); mask |= ((raid<<28)&0xf0000000); DBG_871X("update raid entry, mask=0x%x, arg=0x%x\n", mask, arg); psta->ra_mask=mask; #ifdef CONFIG_INTEL_PROXIM if (padapter->proximity.proxim_on ==true){ arg &= ~BIT(6); } else { arg |= BIT(6); } #endif /* CONFIG_INTEL_PROXIM */ mask |= ((raid<<28)&0xf0000000); /* to do */ /* *(u32 *)&RateMask=EF4Byte((ratr_bitmap&0x0fffffff) | (ratr_index<<28)); RateMask[4] = macId | (bShortGI?0x20:0x00) | 0x80; */ rtl8188e_set_raid_cmd(padapter, mask); } else { #if (RATE_ADAPTIVE_SUPPORT == 1) ODM_RA_UpdateRateInfo_8188E( &(pHalData->odmpriv), mac_id, raid, mask, shortGIrate ); #endif } /* set ra_id */ psta->raid = raid; psta->init_rate = init_rate; } static void SetBeaconRelatedRegisters8188EUsb(struct adapter *padapter) { u32 value32; struct mlme_ext_priv *pmlmeext = &(padapter->mlmeextpriv); struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info); u32 bcn_ctrl_reg = REG_BCN_CTRL; /* reset TSF, enable update TSF, correcting TSF On Beacon */ /* REG_BCN_INTERVAL */ /* REG_BCNDMATIM */ /* REG_ATIMWND */ /* REG_TBTT_PROHIBIT */ /* REG_DRVERLYINT */ /* REG_BCN_MAX_ERR */ /* REG_BCNTCFG (0x510) */ /* REG_DUAL_TSF_RST */ /* REG_BCN_CTRL (0x550) */ /* BCN interval */ rtw_write16(padapter, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval); rtw_write8(padapter, REG_ATIMWND, 0x02);/* 2ms */ _InitBeaconParameters(padapter); rtw_write8(padapter, REG_SLOT, 0x09); value32 =rtw_read32(padapter, REG_TCR); value32 &= ~TSFRST; rtw_write32(padapter, REG_TCR, value32); value32 |= TSFRST; rtw_write32(padapter, REG_TCR, value32); /* NOTE: Fix test chip's bug (about contention windows's randomness) */ rtw_write8(padapter, REG_RXTSF_OFFSET_CCK, 0x50); rtw_write8(padapter, REG_RXTSF_OFFSET_OFDM, 0x50); _BeaconFunctionEnable(padapter, true, true); ResumeTxBeacon(padapter); /* rtw_write8(padapter, 0x422, rtw_read8(padapter, 0x422)|BIT(6)); */ /* rtw_write8(padapter, 0x541, 0xff); */ /* rtw_write8(padapter, 0x542, rtw_read8(padapter, 0x541)|BIT(0)); */ rtw_write8(padapter, bcn_ctrl_reg, rtw_read8(padapter, bcn_ctrl_reg)|BIT(1)); } static void rtl8188eu_init_default_value(struct adapter * padapter) { PHAL_DATA_TYPE pHalData; struct pwrctrl_priv *pwrctrlpriv; struct dm_priv *pdmpriv; u8 i; pHalData = GET_HAL_DATA(padapter); pwrctrlpriv = adapter_to_pwrctl(padapter); pdmpriv = &pHalData->dmpriv; /* init default value */ pHalData->fw_ractrl = false; if (!pwrctrlpriv->bkeepfwalive) pHalData->LastHMEBoxNum = 0; /* init dm default value */ pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = false; pHalData->odmpriv.RFCalibrateInfo.TM_Trigger = 0;/* for IQK */ /* pdmpriv->binitialized = false; */ /* pdmpriv->prv_traffic_idx = 3; */ /* pdmpriv->initialize = 0; */ pHalData->pwrGroupCnt = 0; pHalData->PGMaxGroup= 13; pHalData->odmpriv.RFCalibrateInfo.ThermalValue_HP_index = 0; for(i = 0; i < HP_THERMAL_NUM; i++) pHalData->odmpriv.RFCalibrateInfo.ThermalValue_HP[i] = 0; } static u8 rtl8188eu_ps_func(struct adapter *Adapter, enum HAL_INTF_PS_FUNC efunc_id, u8 *val) { u8 bResult = true; switch (efunc_id){ #if defined(CONFIG_AUTOSUSPEND) case HAL_USB_SELECT_SUSPEND: u8 bfwpoll = *(( u8*)val); break; #endif /* CONFIG_AUTOSUSPEND */ default: break; } return bResult; } void rtl8188eu_set_hal_ops(struct adapter * padapter) { struct hal_ops *pHalFunc = &padapter->HalFunc; padapter->HalData = rtw_zmalloc(sizeof(HAL_DATA_TYPE)); if (padapter->HalData == NULL){ DBG_8192C("cant not alloc memory for HAL DATA\n"); } padapter->hal_data_sz = sizeof(HAL_DATA_TYPE); pHalFunc->hal_power_on = InitPowerOn_rtl8188eu; pHalFunc->hal_power_off = hal_poweroff_rtl8188eu; pHalFunc->hal_init = &rtl8188eu_hal_init; pHalFunc->hal_deinit = &rtl8188eu_hal_deinit; pHalFunc->inirp_init = &rtl8188eu_inirp_init; pHalFunc->inirp_deinit = &rtl8188eu_inirp_deinit; pHalFunc->init_xmit_priv = &rtl8188eu_init_xmit_priv; pHalFunc->free_xmit_priv = &rtl8188eu_free_xmit_priv; pHalFunc->init_recv_priv = &rtl8188eu_init_recv_priv; pHalFunc->free_recv_priv = &rtl8188eu_free_recv_priv; pHalFunc->InitSwLeds = &rtl8188eu_InitSwLeds; pHalFunc->DeInitSwLeds = &rtl8188eu_DeInitSwLeds; pHalFunc->init_default_value = &rtl8188eu_init_default_value; pHalFunc->intf_chip_configure = &rtl8188eu_interface_configure; pHalFunc->read_adapter_info = &ReadAdapterInfo8188EU; /* pHalFunc->set_bwmode_handler = &PHY_SetBWMode8192C; */ /* pHalFunc->set_channel_handler = &PHY_SwChnl8192C; */ /* pHalFunc->hal_dm_watchdog = &rtl8192c_HalDmWatchDog; */ pHalFunc->SetHwRegHandler = &SetHwReg8188EU; pHalFunc->GetHwRegHandler = &GetHwReg8188EU; pHalFunc->GetHalDefVarHandler = &GetHalDefVar8188EUsb; pHalFunc->SetHalDefVarHandler = &SetHalDefVar8188EUsb; pHalFunc->UpdateRAMaskHandler = &UpdateHalRAMask8188EUsb; pHalFunc->SetBeaconRelatedRegistersHandler = &SetBeaconRelatedRegisters8188EUsb; pHalFunc->hal_xmit = &rtl8188eu_hal_xmit; pHalFunc->mgnt_xmit = &rtl8188eu_mgnt_xmit; pHalFunc->hal_xmitframe_enqueue = &rtl8188eu_hal_xmitframe_enqueue; #ifdef CONFIG_HOSTAPD_MLME pHalFunc->hostap_mgnt_xmit_entry = &rtl8188eu_hostap_mgnt_xmit_entry; #endif pHalFunc->interface_ps_func = &rtl8188eu_ps_func; rtl8188e_set_hal_ops(pHalFunc); ; }