/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #ifndef __INC_HAL8188EPHYCFG_H__ #define __INC_HAL8188EPHYCFG_H__ /*--------------------------Define Parameters-------------------------------*/ #define LOOP_LIMIT 5 #define MAX_STALL_TIME 50 //us #define AntennaDiversityValue 0x80 //(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80) #define MAX_TXPWR_IDX_NMODE_92S 63 #define Reset_Cnt_Limit 3 #define IQK_MAC_REG_NUM 4 #define IQK_ADDA_REG_NUM 16 #define IQK_BB_REG_NUM 9 #define HP_THERMAL_NUM 8 #ifdef CONFIG_PCI_HCI #define MAX_AGGR_NUM 0x0B #else #define MAX_AGGR_NUM 0x07 #endif // CONFIG_PCI_HCI /*--------------------------Define Parameters-------------------------------*/ /*------------------------------Define structure----------------------------*/ typedef enum _SwChnlCmdID{ CmdID_End, CmdID_SetTxPowerLevel, CmdID_BBRegWrite10, CmdID_WritePortUlong, CmdID_WritePortUshort, CmdID_WritePortUchar, CmdID_RF_WriteReg, }SwChnlCmdID; /* 1. Switch channel related */ typedef struct _SwChnlCmd{ SwChnlCmdID CmdID; u32 Para1; u32 Para2; u32 msDelay; }SwChnlCmd; typedef enum _HW90_BLOCK{ HW90_BLOCK_MAC = 0, HW90_BLOCK_PHY0 = 1, HW90_BLOCK_PHY1 = 2, HW90_BLOCK_RF = 3, HW90_BLOCK_MAXIMUM = 4, // Never use this }HW90_BLOCK_E, *PHW90_BLOCK_E; typedef enum _RF_RADIO_PATH{ RF_PATH_A = 0, //Radio Path A RF_PATH_B = 1, //Radio Path B RF_PATH_C = 2, //Radio Path C RF_PATH_D = 3, //Radio Path D //RF_PATH_MAX //Max RF number 90 support }RF_RADIO_PATH_E, *PRF_RADIO_PATH_E; #define MAX_PG_GROUP 13 #define RF_PATH_MAX 2 #define MAX_RF_PATH RF_PATH_MAX #define MAX_TX_COUNT 4 //path numbers #define CHANNEL_MAX_NUMBER 14 // 14 is the max channel number #define MAX_CHNL_GROUP_24G 6 // ch1~2, ch3~5, ch6~8,ch9~11,ch12~13,CH 14 total three groups #define CHANNEL_GROUP_MAX_88E 6 typedef enum _WIRELESS_MODE { WIRELESS_MODE_UNKNOWN = 0x00, WIRELESS_MODE_A = BIT2, WIRELESS_MODE_B = BIT0, WIRELESS_MODE_G = BIT1, WIRELESS_MODE_AUTO = BIT5, WIRELESS_MODE_N_24G = BIT3, WIRELESS_MODE_N_5G = BIT4, WIRELESS_MODE_AC = BIT6 } WIRELESS_MODE; typedef enum _PHY_Rate_Tx_Power_Offset_Area{ RA_OFFSET_LEGACY_OFDM1, RA_OFFSET_LEGACY_OFDM2, RA_OFFSET_HT_OFDM1, RA_OFFSET_HT_OFDM2, RA_OFFSET_HT_OFDM3, RA_OFFSET_HT_OFDM4, RA_OFFSET_HT_CCK, }RA_OFFSET_AREA,*PRA_OFFSET_AREA; /* BB/RF related */ typedef enum _RF_TYPE_8190P{ RF_TYPE_MIN, // 0 RF_8225=1, // 1 11b/g RF for verification only RF_8256=2, // 2 11b/g/n RF_8258=3, // 3 11a/b/g/n RF RF_6052=4, // 4 11b/g/n RF //RF_6052=5, // 4 11b/g/n RF // TODO: We sholud remove this psudo PHY RF after we get new RF. RF_PSEUDO_11N=5, // 5, It is a temporality RF. }RF_TYPE_8190P_E,*PRF_TYPE_8190P_E; typedef struct _BB_REGISTER_DEFINITION{ u32 rfintfs; // set software control: // 0x870~0x877[8 bytes] u32 rfintfi; // readback data: // 0x8e0~0x8e7[8 bytes] u32 rfintfo; // output data: // 0x860~0x86f [16 bytes] u32 rfintfe; // output enable: // 0x860~0x86f [16 bytes] u32 rf3wireOffset; // LSSI data: // 0x840~0x84f [16 bytes] u32 rfLSSI_Select; // BB Band Select: // 0x878~0x87f [8 bytes] u32 rfTxGainStage; // Tx gain stage: // 0x80c~0x80f [4 bytes] u32 rfHSSIPara1; // wire parameter control1 : // 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes] u32 rfHSSIPara2; // wire parameter control2 : // 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes] u32 rfSwitchControl; //Tx Rx antenna control : // 0x858~0x85f [16 bytes] u32 rfAGCControl1; //AGC parameter control1 : // 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes] u32 rfAGCControl2; //AGC parameter control2 : // 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes] u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix : // 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes] u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter : // 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes] u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix // 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes] u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type // 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes] u32 rfLSSIReadBack; //LSSI RF readback data SI mode // 0x8a0~0x8af [16 bytes] u32 rfLSSIReadBackPi; //LSSI RF readback data PI mode 0x8b8-8bc for Path A and B }BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T; typedef struct _R_ANTENNA_SELECT_OFDM{ u32 r_tx_antenna:4; u32 r_ant_l:4; u32 r_ant_non_ht:4; u32 r_ant_ht1:4; u32 r_ant_ht2:4; u32 r_ant_ht_s1:4; u32 r_ant_non_ht_s1:4; u32 OFDM_TXSC:2; u32 Reserved:2; }R_ANTENNA_SELECT_OFDM; typedef struct _R_ANTENNA_SELECT_CCK{ u8 r_cckrx_enable_2:2; u8 r_cckrx_enable:2; u8 r_ccktx_enable:4; }R_ANTENNA_SELECT_CCK; /*------------------------------Define structure----------------------------*/ /*------------------------Export global variable----------------------------*/ /*------------------------Export global variable----------------------------*/ /*------------------------Export Marco Definition---------------------------*/ /*------------------------Export Marco Definition---------------------------*/ /*--------------------------Exported Function prototype---------------------*/ // // BB and RF register read/write // u32 rtl8188e_PHY_QueryBBReg( PADAPTER Adapter, u32 RegAddr, u32 BitMask ); void rtl8188e_PHY_SetBBReg( PADAPTER Adapter, u32 RegAddr, u32 BitMask, u32 Data ); u32 rtl8188e_PHY_QueryRFReg(PADAPTER Adapter, RF_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask); void rtl8188e_PHY_SetRFReg(PADAPTER Adapter, RF_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data); // // Initialization related function // /* MAC/BB/RF HAL config */ int PHY_MACConfig8188E( PADAPTER Adapter ); int PHY_BBConfig8188E( PADAPTER Adapter ); int PHY_RFConfig8188E( PADAPTER Adapter ); /* RF config */ int rtl8188e_PHY_ConfigRFWithParaFile(PADAPTER Adapter, u8 * pFileName, RF_RADIO_PATH_E eRFPath); int rtl8188e_PHY_ConfigRFWithHeaderFile( PADAPTER Adapter, RF_RADIO_PATH_E eRFPath); /* Read initi reg value for tx power setting. */ void rtl8192c_PHY_GetHWRegOriginalValue( PADAPTER Adapter ); // // RF Power setting // //extern bool PHY_SetRFPowerState( PADAPTER Adapter, // RT_RF_POWER_STATE eRFPowerState); // // BB TX Power R/W // void PHY_GetTxPowerLevel8188E(PADAPTER Adapter, u32 *powerlevel); void PHY_SetTxPowerLevel8188E(PADAPTER Adapter, u8 channel); bool PHY_UpdateTxPowerDbm8188E(PADAPTER Adapter, int powerInDbm); // void PHY_ScanOperationBackup8188E( PADAPTER Adapter, u8 Operation ); // // Switch bandwidth for 8192S // //extern void PHY_SetBWModeCallback8192C( PRT_TIMER pTimer ); void PHY_SetBWMode8188E( PADAPTER pAdapter, HT_CHANNEL_WIDTH ChnlWidth, unsigned char Offset ); // // Set FW CMD IO for 8192S. // //extern bool HalSetIO8192C( PADAPTER Adapter, // IO_TYPE IOType); // // Set A2 entry to fw for 8192S // extern void FillA2Entry8192C( PADAPTER Adapter, u8 index, u8* val); // // channel switch related funciton // //extern void PHY_SwChnlCallback8192C( PRT_TIMER pTimer ); void PHY_SwChnl8188E( PADAPTER pAdapter, u8 channel ); // Call after initialization void PHY_SwChnlPhy8192C( PADAPTER pAdapter, u8 channel ); void ChkFwCmdIoDone( PADAPTER Adapter); // // BB/MAC/RF other monitor API // void PHY_SetMonitorMode8192C( PADAPTER pAdapter, bool bEnableMonitorMode ); bool PHY_CheckIsLegalRfPath8192C( PADAPTER pAdapter, u32 eRFPath ); void PHY_SetRFPathSwitch_8188E( PADAPTER pAdapter, bool bMain); extern void PHY_SwitchEphyParameter( PADAPTER Adapter ); extern void PHY_EnableHostClkReq( PADAPTER Adapter ); bool SetAntennaConfig92C( PADAPTER Adapter, u8 DefaultAnt ); #ifdef CONFIG_PHY_SETTING_WITH_ODM void storePwrIndexDiffRateOffset( PADAPTER Adapter, u32 RegAddr, u32 BitMask, u32 Data ); #endif //CONFIG_PHY_SETTING_WITH_ODM /*--------------------------Exported Function prototype---------------------*/ #define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8188e_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask)) #define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8188e_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data)) #define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8188e_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask)) #define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8188e_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data)) #define PHY_SetMacReg PHY_SetBBReg // // Initialization related function // /* MAC/BB/RF HAL config */ //extern s32 PHY_MACConfig8723(PADAPTER padapter); //s32 PHY_BBConfig8723(PADAPTER padapter); //s32 PHY_RFConfig8723(PADAPTER padapter); //================================================================== // Note: If SIC_ENABLE under PCIE, because of the slow operation // you should // 2) "#define RTL8723_FPGA_VERIFICATION 1" in Precomp.h.WlanE.Windows // 3) "#define RTL8190_Download_Firmware_From_Header 0" in Precomp.h.WlanE.Windows if needed. // #if (RTL8188E_SUPPORT == 1) && (RTL8188E_FPGA_true_PHY_VERIFICATION == 1) #define SIC_ENABLE 1 #define SIC_HW_SUPPORT 1 #else #define SIC_ENABLE 0 #define SIC_HW_SUPPORT 0 #endif //================================================================== #define SIC_MAX_POLL_CNT 5 #if (SIC_HW_SUPPORT == 1) #define SIC_CMD_READY 0 #define SIC_CMD_PREWRITE 0x1 #if (RTL8188E_SUPPORT == 1) #define SIC_CMD_WRITE 0x40 #define SIC_CMD_PREREAD 0x2 #define SIC_CMD_READ 0x80 #define SIC_CMD_INIT 0xf0 #define SIC_INIT_VAL 0xff #define SIC_INIT_REG 0x1b7 #define SIC_CMD_REG 0x1EB // 1byte #define SIC_ADDR_REG 0x1E8 // 1b4~1b5, 2 bytes #define SIC_DATA_REG 0x1EC // 1b0~1b3 #else #define SIC_CMD_WRITE 0x11 #define SIC_CMD_PREREAD 0x2 #define SIC_CMD_READ 0x12 #define SIC_CMD_INIT 0x1f #define SIC_INIT_VAL 0xff #define SIC_INIT_REG 0x1b7 #define SIC_CMD_REG 0x1b6 // 1byte #define SIC_ADDR_REG 0x1b4 // 1b4~1b5, 2 bytes #define SIC_DATA_REG 0x1b0 // 1b0~1b3 #endif #else #define SIC_CMD_READY 0 #define SIC_CMD_WRITE 1 #define SIC_CMD_READ 2 #if (RTL8188E_SUPPORT == 1) #define SIC_CMD_REG 0x1EB // 1byte #define SIC_ADDR_REG 0x1E8 // 1b9~1ba, 2 bytes #define SIC_DATA_REG 0x1EC // 1bc~1bf #else #define SIC_CMD_REG 0x1b8 // 1byte #define SIC_ADDR_REG 0x1b9 // 1b9~1ba, 2 bytes #define SIC_DATA_REG 0x1bc // 1bc~1bf #endif #endif #if (SIC_ENABLE == 1) void SIC_Init(PADAPTER Adapter); #endif #endif // __INC_HAL8192CPHYCFG_H