/****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * ******************************************************************************/ #define _RTL8188E_MP_C_ #include #include #include #include s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable) { struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); if (!netif_running(padapter->pnetdev)) { RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n")); return _FAIL; } if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == false) { RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n")); return _FAIL; } if (enable) { pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true; } else pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit= false; return _SUCCESS; } void Hal_GetPowerTracking(PADAPTER padapter, u8 *enable) { struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); *enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl; } static void Hal_disable_dm(PADAPTER padapter) { u8 v8; struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter); struct dm_priv *pdmpriv = &pHalData->dmpriv; PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); /* 3 1. disable firmware dynamic mechanism */ /* disable Power Training, Rate Adaptive */ v8 = rtw_read8(padapter, REG_BCN_CTRL); v8 &= ~EN_BCN_FUNCTION; rtw_write8(padapter, REG_BCN_CTRL, v8); /* 3 2. disable driver dynamic mechanism */ /* disable Dynamic Initial Gain */ /* disable High Power */ /* disable Power Tracking */ Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false); /* enable APK, LCK and IQK but disable power tracking */ pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = false; Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, true); } /*----------------------------------------------------------------------------- * Function: mpt_SwitchRfSetting * * Overview: Change RF Setting when we siwthc channel/rate/BW for MP. * * Input: PADAPTER pAdapter * * Output: NONE * * Return: NONE * * Revised History: * When Who Remark * 01/08/2009 MHC Suggestion from SD3 Willis for 92S series. * 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3. * *---------------------------------------------------------------------------*/ void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter) { /* struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); */ struct mp_priv *pmp = &pAdapter->mppriv; u1Byte ChannelToSw = pmp->channel; ULONG ulRateIdx = pmp->rateidx; ULONG ulbandwidth = pmp->bandwidth; struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); /* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis. */ pmp->MptCtx.backup0x52_RF_A = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0); pmp->MptCtx.backup0x52_RF_B = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0); PHY_SetRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0, 0xD); PHY_SetRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0, 0xD); return ; } /*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/ /*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, bool bInCH14) { u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0; u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12; u8 i; struct hal_data_8188e *pHalData = GET_HAL_DATA(Adapter); /* get current cck swing value and check 0xa22 & 0xa23 later to match the table. */ CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord); if (!bInCH14) { /* Readback the current bb cck swing value and compare with the table to */ /* get the current swing index */ for (i = 0; i < CCK_TABLE_SIZE; i++) { if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) && (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1])) { CCKSwingIndex = i; break; } } /* Write 0xa22 0xa23 */ TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8) ; /* Write 0xa24 ~ 0xa27 */ TempVal2 = 0; TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16 )+ (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24); /* Write 0xa28 0xa29 */ TempVal3 = 0; TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] + (CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8) ; } else { for (i = 0; i < CCK_TABLE_SIZE; i++) { if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) && (((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1])) { CCKSwingIndex = i; break; } } /* Write 0xa22 0xa23 */ TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] + (CCKSwingTable_Ch14[CCKSwingIndex][1]<<8) ; /* Write 0xa24 ~ 0xa27 */ TempVal2 = 0; TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] + (CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) + (CCKSwingTable_Ch14[CCKSwingIndex][4]<<16 )+ (CCKSwingTable_Ch14[CCKSwingIndex][5]<<24); /* Write 0xa28 0xa29 */ TempVal3 = 0; TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] + (CCKSwingTable_Ch14[CCKSwingIndex][7]<<8) ; } write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal); write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2); write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3); } void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, bool beven) { s32 TempCCk; u8 CCK_index, CCK_index_old; u8 Action = 0; /* 0: no action, 1: even->odd, 2:odd->even */ u8 TimeOut = 100; s32 i = 0; struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; struct dm_priv *pdmpriv = &pHalData->dmpriv; PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); if (!IS_92C_SERIAL(pHalData->VersionID)) return; if (beven && !pMptCtx->bMptIndexEven) /* odd->even */ { Action = 2; pMptCtx->bMptIndexEven = true; } else if (!beven && pMptCtx->bMptIndexEven) /* even->odd */ { Action = 1; pMptCtx->bMptIndexEven = false; } if (Action != 0) { /* Query CCK default setting From 0xa24 */ TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK; for (i = 0; i < CCK_TABLE_SIZE; i++) { if (pDM_Odm->RFCalibrateInfo.bCCKinCH14) { if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4) == true) { CCK_index_old = (u8) i; break; } } else { if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4) == true) { CCK_index_old = (u8) i; break; } } } if (Action == 1) CCK_index = CCK_index_old - 1; else CCK_index = CCK_index_old + 1; /* Adjust CCK according to gain index */ if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) { rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]); rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]); rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]); rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]); rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]); rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]); rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]); rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]); } else { rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]); rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]); rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]); rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]); rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]); rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]); rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]); rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]); } } } /*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/ /* * SetChannel * Description * Use H2C command to change channel, * not only modify rf register, but also other setting need to be done. */ void Hal_SetChannel(PADAPTER pAdapter) { u8 eRFPath; struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); struct mp_priv *pmp = &pAdapter->mppriv; struct dm_priv *pdmpriv = &pHalData->dmpriv; PDM_ODM_T pDM_Odm = &(pHalData->odmpriv); u8 channel = pmp->channel; u8 bandwidth = pmp->bandwidth; u8 rate = pmp->rateidx; /* set RF channel register */ for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++) { if (IS_HARDWARE_TYPE_8192D(pAdapter)) _write_rfreg(pAdapter, (RF_RADIO_PATH_E)eRFPath, ODM_CHANNEL, 0xFF, channel); else _write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0x3FF, channel); } Hal_mpt_SwitchRfSetting(pAdapter); SelectChannel(pAdapter, channel); if (pHalData->CurrentChannel == 14 && !pDM_Odm->RFCalibrateInfo.bCCKinCH14) { pDM_Odm->RFCalibrateInfo.bCCKinCH14 = true; Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14); } else if (pHalData->CurrentChannel != 14 && pDM_Odm->RFCalibrateInfo.bCCKinCH14) { pDM_Odm->RFCalibrateInfo.bCCKinCH14 = false; Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14); } } /* * Notice * Switch bandwitdth may change center frequency(channel) */ void Hal_SetBandwidth(PADAPTER pAdapter) { struct mp_priv *pmp = &pAdapter->mppriv; SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset); Hal_mpt_SwitchRfSetting(pAdapter); } void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower) { u32 tmpval = 0; /* rf-A cck tx power */ write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]); tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A]; write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval); /* rf-B cck tx power */ write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]); tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B]; write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval); RT_TRACE(_module_mp_, _drv_notice_, ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n", TxPower[RF_PATH_A], TxPower[RF_PATH_B])); } void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower) { u32 TxAGC = 0; u8 tmpval = 0; PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx; struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); /* HT Tx-rf(A) */ tmpval = TxPower[RF_PATH_A]; TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC); /* HT Tx-rf(B) */ tmpval = TxPower[RF_PATH_B]; TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval; write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC); write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC); } void Hal_SetAntennaPathPower(PADAPTER pAdapter) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); u8 TxPowerLevel[MAX_RF_PATH_NUMS]; u8 rfPath; TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx; TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b; switch (pAdapter->mppriv.antenna_tx) { case ANTENNA_A: default: rfPath = RF_PATH_A; break; case ANTENNA_B: rfPath = RF_PATH_B; break; case ANTENNA_C: rfPath = RF_PATH_C; break; } switch (pHalData->rf_chip) { case RF_8225: case RF_8256: case RF_6052: Hal_SetCCKTxPower(pAdapter, TxPowerLevel); if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); break; default: break; } } void Hal_SetTxPower(PADAPTER pAdapter) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); u8 TxPower = pAdapter->mppriv.txpoweridx; u8 TxPowerLevel[MAX_RF_PATH_NUMS]; u8 rf, rfPath; for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++) { TxPowerLevel[rf] = TxPower; } switch (pAdapter->mppriv.antenna_tx) { case ANTENNA_A: default: rfPath = RF_PATH_A; break; case ANTENNA_B: rfPath = RF_PATH_B; break; case ANTENNA_C: rfPath = RF_PATH_C; break; } switch (pHalData->rf_chip) { /* 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! */ /* We should call normal driver API later!! */ case RF_8225: case RF_8256: case RF_6052: Hal_SetCCKTxPower(pAdapter, TxPowerLevel); if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */ Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0); Hal_SetOFDMTxPower(pAdapter, TxPowerLevel); break; default: break; } } void Hal_SetDataRate(PADAPTER pAdapter) { Hal_mpt_SwitchRfSetting(pAdapter); } void Hal_SetAntenna(PADAPTER pAdapter) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */ R_ANTENNA_SELECT_CCK *p_cck_txrx; u8 r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0; u8 chgTx = 0, chgRx = 0; u32 r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0; p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val; p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val; p_ofdm_tx->r_ant_ht1 = 0x1; p_ofdm_tx->r_ant_ht2 = 0x2; /* Second TX RF path is A */ p_ofdm_tx->r_ant_non_ht = 0x3; /* 0x1+0x2=0x3 */ switch (pAdapter->mppriv.antenna_tx) { case ANTENNA_A: p_ofdm_tx->r_tx_antenna = 0x1; r_ofdm_tx_en_val = 0x1; p_ofdm_tx->r_ant_l = 0x1; p_ofdm_tx->r_ant_ht_s1 = 0x1; p_ofdm_tx->r_ant_non_ht_s1 = 0x1; p_cck_txrx->r_ccktx_enable = 0x8; chgTx = 1; /* From SD3 Willis suggestion !!! Set RF A=TX and B as standby */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1); r_ofdm_tx_en_val = 0x3; /* Power save */ /* cosa r_ant_select_ofdm_val = 0x11111111; */ /* We need to close RFB by SW control */ if (pHalData->rf_type == RF_2T2R) { PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1); PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0); } break; case ANTENNA_B: p_ofdm_tx->r_tx_antenna = 0x2; r_ofdm_tx_en_val = 0x2; p_ofdm_tx->r_ant_l = 0x2; p_ofdm_tx->r_ant_ht_s1 = 0x2; p_ofdm_tx->r_ant_non_ht_s1 = 0x2; p_cck_txrx->r_ccktx_enable = 0x4; chgTx = 1; /* From SD3 Willis suggestion !!! Set RF A as standby */ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1); PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); /* Power save */ /* cosa r_ant_select_ofdm_val = 0x22222222; */ /* 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. */ /* 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control */ if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) { PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1); PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); } break; case ANTENNA_AB: /* For 8192S */ p_ofdm_tx->r_tx_antenna = 0x3; r_ofdm_tx_en_val = 0x3; p_ofdm_tx->r_ant_l = 0x3; p_ofdm_tx->r_ant_ht_s1 = 0x3; p_ofdm_tx->r_ant_non_ht_s1 = 0x3; p_cck_txrx->r_ccktx_enable = 0xC; chgTx = 1; /* From SD3 Willis suggestion !!! Set RF B as standby */ PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2); PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2); /* Disable Power save */ /* cosa r_ant_select_ofdm_val = 0x3321333; */ /* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control */ if (pHalData->rf_type == RF_2T2R) { PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1); PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1); } break; default: break; } /* */ /* r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D */ /* r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D */ /* r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D */ /* */ switch (pAdapter->mppriv.antenna_rx) { case ANTENNA_A: r_rx_antenna_ofdm = 0x1; /* A */ p_cck_txrx->r_cckrx_enable = 0x0; /* default: A */ p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A */ chgRx = 1; break; case ANTENNA_B: r_rx_antenna_ofdm = 0x2; /* B */ p_cck_txrx->r_cckrx_enable = 0x1; /* default: B */ p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option: B */ chgRx = 1; break; case ANTENNA_AB: r_rx_antenna_ofdm = 0x3; /* AB */ p_cck_txrx->r_cckrx_enable = 0x0; /* default:A */ p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option:B */ chgRx = 1; break; default: break; } if (chgTx && chgRx) { switch (pHalData->rf_chip) { case RF_8225: case RF_8256: case RF_6052: /* r_ant_sel_cck_val = r_ant_select_cck_val; */ PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /* OFDM Tx */ PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /* OFDM Tx */ PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */ PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */ PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val); /* CCK TxRx */ break; default: break; } } RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n")); } s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); if (!netif_running(pAdapter->pnetdev)) { RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n")); return _FAIL; } if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false) { RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n")); return _FAIL; } target_ther &= 0xff; if (target_ther < 0x07) target_ther = 0x07; else if (target_ther > 0x1d) target_ther = 0x1d; pHalData->EEPROMThermalMeter = target_ther; return _SUCCESS; } void Hal_TriggerRFThermalMeter(PADAPTER pAdapter) { _write_rfreg( pAdapter, RF_PATH_A , RF_T_METER_88E , BIT17 |BIT16 , 0x03 ); } u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter) { u32 ThermalValue = 0; ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, 0xfc00); return (u8)ThermalValue; } void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value) { Hal_TriggerRFThermalMeter(pAdapter); rtw_msleep_os(1000); *value = Hal_ReadRFThermalMeter(pAdapter); } void Hal_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); pAdapter->mppriv.MptCtx.bSingleCarrier = bStart; if (bStart)/* Start Single Carrier. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test start\n")); /* 1. if OFDM block on? */ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */ { /* 2. set CCK test mode off, set to CCK normal mode */ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); /* 3. turn on scramble setting */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); } /* 4. Turn On Single Carrier Tx and turn off the other test modes. */ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); /* for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); } else/* Stop Single Carrier. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test stop\n")); /* Turn off all test modes. */ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); rtw_msleep_os(10); /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); /* Stop for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); } } void Hal_SetSingleToneTx(PADAPTER pAdapter, u8 bStart) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); bool is92C = IS_92C_SERIAL(pHalData->VersionID); u8 rfPath; u32 reg58 = 0x0; switch (pAdapter->mppriv.antenna_tx) { case ANTENNA_A: default: rfPath = RF_PATH_A; break; case ANTENNA_B: rfPath = RF_PATH_B; break; case ANTENNA_C: rfPath = RF_PATH_C; break; } pAdapter->mppriv.MptCtx.bSingleTone = bStart; if (bStart)/* Start Single Tone. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test start\n")); { /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ if (IS_HARDWARE_TYPE_8188E(pAdapter)) { reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); reg58 &= 0xFFFFFFF0; reg58 += 2; PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); } PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0); PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0); } if (is92C) { _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01); rtw_usleep_os(100); if (rfPath == RF_PATH_A) write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */ else if (rfPath == RF_PATH_B) write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */ write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ rtw_usleep_os(100); } else { write_rfreg(pAdapter, rfPath, 0x21, 0xd4000); rtw_usleep_os(100); write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */ rtw_usleep_os(100); } /* for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); } else/* Stop Single Tone. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test stop\n")); { /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */ /* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */ if (IS_HARDWARE_TYPE_8188E(pAdapter)) { reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask); reg58 &= 0xFFFFFFF0; PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58); } write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1); write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1); } if (is92C) { _write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00); rtw_usleep_os(100); write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */ write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */ rtw_usleep_os(100); } else { write_rfreg(pAdapter, rfPath, 0x21, 0x54000); rtw_usleep_os(100); write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */ rtw_usleep_os(100); } /* Stop for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); } } void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart) { pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart; if (bStart) /* Start Carrier Suppression. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test start\n")); if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) { /* 1. if CCK block on? */ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */ /* Turn Off All Test Mode */ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /* turn off scramble setting */ /* Set CCK Tx Test Rate */ write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /* Set FTxRate to 1Mbps */ } /* for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); } else/* Stop Carrier Suppression. */ { RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test stop\n")); if (pAdapter->mppriv.rateidx <= MPT_RATE_11M ) { write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /* turn on scramble setting */ /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); } /* Stop for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); } } void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart) { u32 cckrate; if (bStart) { RT_TRACE(_module_mp_, _drv_alert_, ("SetCCKContinuousTx: test start\n")); /* 1. if CCK block on? */ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn)) write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */ /* Turn Off All Test Mode */ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); /* Set CCK Tx Test Rate */ cckrate = pAdapter->mppriv.rateidx; write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate); write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */ /* for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); } else { RT_TRACE(_module_mp_, _drv_info_, ("SetCCKContinuousTx: test stop\n")); write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */ /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); /* Stop for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); } pAdapter->mppriv.MptCtx.bCckContTx = bStart; pAdapter->mppriv.MptCtx.bOfdmContTx = false; }/* mpt_StartCckContTx */ void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart) { struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter); if (bStart) { RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n")); /* 1. if OFDM block on? */ if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn)) write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */ { /* 2. set CCK test mode off, set to CCK normal mode */ write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable); /* 3. turn on scramble setting */ write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); } /* 4. Turn On Continue Tx and turn off the other test modes. */ write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); /* for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500); } else { RT_TRACE(_module_mp_,_drv_info_, ("SetOFDMContinuousTx: test stop\n")); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable); write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable); /* Delay 10 ms */ rtw_msleep_os(10); /* BB Reset */ write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0); write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1); /* Stop for dynamic set Power index. */ write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100); write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100); } pAdapter->mppriv.MptCtx.bCckContTx = false; pAdapter->mppriv.MptCtx.bOfdmContTx = bStart; }/* mpt_StartOfdmContTx */ void Hal_SetContinuousTx(PADAPTER pAdapter, u8 bStart) { RT_TRACE(_module_mp_, _drv_info_, ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx)); pAdapter->mppriv.MptCtx.bStartContTx = bStart; if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) { Hal_SetCCKContinuousTx(pAdapter, bStart); } else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) && (pAdapter->mppriv.rateidx <= MPT_RATE_MCS15)) { Hal_SetOFDMContinuousTx(pAdapter, bStart); } }