rtl8188eu/hal/OUTSRC/odm_debug.h
Larry Finger 065126d8ce rtl8188eu: Place driver rtl8188EUS_rtl8189ES_linux_v4.1.8_9499.20131104 in branch v4.1.8_9499
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2014-12-11 15:15:04 -06:00

905 lines
30 KiB
C
Executable file

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __ODM_DBG_H__
#define __ODM_DBG_H__
//-----------------------------------------------------------------------------
// Define the debug levels
//
// 1. DBG_TRACE and DBG_LOUD are used for normal cases.
// So that, they can help SW engineer to develope or trace states changed
// and also help HW enginner to trace every operation to and from HW,
// e.g IO, Tx, Rx.
//
// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases,
// which help us to debug SW or HW.
//
//-----------------------------------------------------------------------------
//
// Never used in a call to ODM_RT_TRACE()!
//
#define ODM_DBG_OFF 1
//
// Fatal bug.
// For example, Tx/Rx/IO locked up, OS hangs, memory access violation,
// resource allocation failed, unexpected HW behavior, HW BUG and so on.
//
#define ODM_DBG_SERIOUS 2
//
// Abnormal, rare, or unexpeted cases.
// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
//
#define ODM_DBG_WARNING 3
//
// Normal case with useful information about current SW or HW state.
// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status,
// SW protocol state change, dynamic mechanism state change and so on.
//
#define ODM_DBG_LOUD 4
//
// Normal case with detail execution flow or information.
//
#define ODM_DBG_TRACE 5
//-----------------------------------------------------------------------------
// Define the tracing components
//
//-----------------------------------------------------------------------------
//BB Functions
#define ODM_COMP_DIG BIT0
#define ODM_COMP_RA_MASK BIT1
#define ODM_COMP_DYNAMIC_TXPWR BIT2
#define ODM_COMP_FA_CNT BIT3
#define ODM_COMP_RSSI_MONITOR BIT4
#define ODM_COMP_CCK_PD BIT5
#define ODM_COMP_ANT_DIV BIT6
#define ODM_COMP_PWR_SAVE BIT7
#define ODM_COMP_PWR_TRAIN BIT8
#define ODM_COMP_RATE_ADAPTIVE BIT9
#define ODM_COMP_PATH_DIV BIT10
#define ODM_COMP_PSD BIT11
#define ODM_COMP_DYNAMIC_PRICCA BIT12
#define ODM_COMP_RXHP BIT13
//MAC Functions
#define ODM_COMP_EDCA_TURBO BIT16
#define ODM_COMP_EARLY_MODE BIT17
//RF Functions
#define ODM_COMP_TX_PWR_TRACK BIT24
#define ODM_COMP_RX_GAIN_TRACK BIT25
#define ODM_COMP_CALIBRATION BIT26
//Common Functions
#define ODM_COMP_COMMON BIT30
#define ODM_COMP_INIT BIT31
/*------------------------Export Marco Definition---------------------------*/
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
#define RT_PRINTK DbgPrint
#elif (DM_ODM_SUPPORT_TYPE == ODM_CE)
#define DbgPrint printk
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
#else
#define DbgPrint panic_printk
#define RT_PRINTK(fmt, args...) DbgPrint( "%s(): " fmt, __FUNCTION__, ## args);
#endif
#ifndef ASSERT
#define ASSERT(expr)
#endif
#if DBG
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt) \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
{ \
if(pDM_Odm->SupportICType == ODM_RTL8192C) \
DbgPrint("[ODM-92C] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8192D) \
DbgPrint("[ODM-92D] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8723A) \
DbgPrint("[ODM-8723A] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8188E) \
DbgPrint("[ODM-8188E] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8812) \
DbgPrint("[ODM-8812] "); \
else if(pDM_Odm->SupportICType == ODM_RTL8821) \
DbgPrint("[ODM-8821] "); \
RT_PRINTK fmt; \
}
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt) \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
{ \
RT_PRINTK fmt; \
}
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt) \
if(!(expr)) { \
DbgPrint( "Assertion failed! %s at ......\n", #expr); \
DbgPrint( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \
RT_PRINTK fmt; \
ASSERT(FALSE); \
}
#define ODM_dbg_enter() { DbgPrint("==> %s\n", __FUNCTION__); }
#define ODM_dbg_exit() { DbgPrint("<== %s\n", __FUNCTION__); }
#define ODM_dbg_trace(str) { DbgPrint("%s:%s\n", __FUNCTION__, str); }
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr) \
if(((comp) & pDM_Odm->DebugComponents) && (level <= pDM_Odm->DebugLevel)) \
{ \
int __i; \
pu1Byte __ptr = (pu1Byte)ptr; \
DbgPrint("[ODM] "); \
DbgPrint(title_str); \
DbgPrint(" "); \
for( __i=0; __i<6; __i++ ) \
DbgPrint("%02X%s", __ptr[__i], (__i==5)?"":"-"); \
DbgPrint("\n"); \
}
#else
#define ODM_RT_TRACE(pDM_Odm, comp, level, fmt)
#define ODM_RT_TRACE_F(pDM_Odm, comp, level, fmt)
#define ODM_RT_ASSERT(pDM_Odm, expr, fmt)
#define ODM_dbg_enter()
#define ODM_dbg_exit()
#define ODM_dbg_trace(str)
#define ODM_PRINT_ADDR(pDM_Odm, comp, level, title_str, ptr)
#endif
VOID
ODM_InitDebugSetting(
IN PDM_ODM_T pDM_Odm
);
#if 0
#if DBG
#define DbgPrint printk
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \
{ \
char *szTitle = _TitleString; \
pu1Byte pbtHexData = _HexData; \
u4Byte u4bHexDataLen = _HexDataLen; \
u4Byte __i; \
DbgPrint("%s", szTitle); \
for (__i=0;__i<u4bHexDataLen;__i++) \
{ \
if ((__i & 15) == 0) \
{ \
DbgPrint("\n"); \
} \
DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \
} \
DbgPrint("\n"); \
}
// RT_PRINT_XXX macros: implemented for debugging purpose.
// Added by Annie, 2005-11-21.
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
{ \
int __i; \
pu1Byte ptr = (pu1Byte)_HexData; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
{ \
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \
if (((__i + 1) % 16) == 0) DbgPrint("\n"); \
} \
DbgPrint("\n"); \
}
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
{ \
int __i; \
pu1Byte ptr = (pu1Byte)_Ptr; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint(" "); \
for( __i=0; __i<6; __i++ ) \
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
DbgPrint("\n"); \
}
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
{ \
int __i, __j; \
pu1Byte ptr = (pu1Byte)_Ptr; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint("\n"); \
for( __i=0; __i<(int)_AddNum; __i++ ) \
{ \
for( __j=0; __j<6; __j++ ) \
DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \
DbgPrint("\n"); \
} \
}
// Added by Annie, 2005-11-22.
#define MAX_STR_LEN 64
#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \
if(((_Comp) & ODM_GlobalDebugComponents) && (_Level <= ODM_GlobalDebugLevel)) \
{ \
int __i; \
u1Byte buffer[MAX_STR_LEN]; \
int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
PlatformZeroMemory( buffer, MAX_STR_LEN ); \
PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \
for( __i=0; __i<MAX_STR_LEN; __i++ ) \
{ \
if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
} \
buffer[length] = '\0'; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint(": %d, <%s>\n", _Len, buffer); \
}
#else // of #if DBG
#define DbgPrint(...)
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen)
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen)
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr)
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum)
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len)
#endif // of #if DBG
#endif
#if 0
/* Define debug print header for every service module.*/
typedef struct tag_ODM_DBGP_Service_Module_Header_Name_Structure
{
const char *pMANS;
const char *pRTOS;
const char *pALM;
const char *pPEM;
const char *pCMPK;
const char *pRAPD;
const char *pTXPB;
const char *pQUMG;
}ODM_DBGP_HEAD_T;
/* Define different debug flag for dedicated service modules in debug flag array. */
// Each module has independt 32 bit debug flag you cnn define the flag as yout require.
typedef enum tag_ODM_DBGP_Flag_Type_Definition
{
ODM_FTX = 0,
ODM_FRX ,
ODM_FPHY ,
ODM_FPWR ,
ODM_FDM ,
ODM_FC2H ,
ODM_FBT ,
ODM_DBGP_TYPE_MAX
}ODM_DBGP_FLAG_E;
// Define TX relative debug bit --> FTX
#define ODM_TX_DESC BIT0
#define ODM_TX_DESC_TID BIT1
#define ODM_TX_PATH BIT2
// Define RX relative debug bit --> FRX
#define ODM_RX_DATA BIT0
#define ODM_RX_PHY_STS BIT1
#define ODM_RX_PHY_SS BIT2
#define ODM_RX_PHY_SQ BIT3
#define ODM_RX_PHY_ASTS BIT4
#define ODM_RX_ERR_LEN BIT5
#define ODM_RX_DEFRAG BIT6
#define ODM_RX_ERR_RATE BIT7
#define ODM_RX_PATH BIT8
#define ODM_RX_BEACON BIT9
// Define PHY-BB/RF/MAC check module bit --> FPHY
#define ODM_PHY_BBR BIT0
#define ODM_PHY_BBW BIT1
#define ODM_PHY_RFR BIT2
#define ODM_PHY_RFW BIT3
#define ODM_PHY_MACR BIT4
#define ODM_PHY_MACW BIT5
#define ODM_PHY_ALLR BIT6
#define ODM_PHY_ALLW BIT7
#define ODM_PHY_TXPWR BIT8
#define ODM_PHY_PWRDIFF BIT9
#define ODM_PHY_SICR BIT10
#define ODM_PHY_SICW BIT11
extern u4Byte ODM_GlobalDebugLevel;
#if DBG
extern u8Byte ODM_GlobalDebugComponents;
#endif
#endif
#if 0
//-----------------------------------------------------------------------------
// Define the debug levels
//
// 1. DBG_TRACE and DBG_LOUD are used for normal cases.
// So that, they can help SW engineer to develope or trace states changed
// and also help HW enginner to trace every operation to and from HW,
// e.g IO, Tx, Rx.
//
// 2. DBG_WARNNING and DBG_SERIOUS are used for unusual or error cases,
// which help us to debug SW or HW.
//
//-----------------------------------------------------------------------------
//
// Never used in a call to ODM_RT_TRACE(pDM_Odm,)!
//
#define DBG_OFF 0
//
// Deprecated! Don't use it!
// TODO: fix related debug message!
//
//#define DBG_SEC 1
//
// Fatal bug.
// For example, Tx/Rx/IO locked up, OS hangs, memory access violation,
// resource allocation failed, unexpected HW behavior, HW BUG and so on.
//
#define DBG_SERIOUS 2
//
// Abnormal, rare, or unexpeted cases.
// For example, IRP/Packet/OID canceled, device suprisely unremoved and so on.
//
#define DBG_WARNING 3
//
// Normal case with useful information about current SW or HW state.
// For example, Tx/Rx descriptor to fill, Tx/Rx descriptor completed status,
// SW protocol state change, dynamic mechanism state change and so on.
//
#define DBG_LOUD 4
//
// Normal case with detail execution flow or information.
//
#define DBG_TRACE 5
//-----------------------------------------------------------------------------
// Define the tracing components
//
//-----------------------------------------------------------------------------
#define COMP_TRACE BIT0 // For function call tracing.
#define COMP_DBG BIT1 // Only for temporary debug message.
#define COMP_INIT BIT2 // during driver initialization / halt / reset.
#define COMP_OID_QUERY BIT3 // Query OID.
#define COMP_OID_SET BIT4 // Set OID.
#define COMP_RECV BIT5 // Reveive part data path.
#define COMP_SEND BIT6 // Send part path.
#define COMP_IO BIT7 // I/O Related. Added by Annie, 2006-03-02.
#define COMP_POWER BIT8 // 802.11 Power Save mode or System/Device Power state related.
#define COMP_MLME BIT9 // 802.11 link related: join/start BSS, leave BSS.
#define COMP_SCAN BIT10 // For site survey.
#define COMP_SYSTEM BIT11 // For general platform function.
#define COMP_SEC BIT12 // For Security.
#define COMP_AP BIT13 // For AP mode related.
#define COMP_TURBO BIT14 // For Turbo Mode related. By Annie, 2005-10-21.
#define COMP_QOS BIT15 // For QoS.
#define COMP_AUTHENTICATOR BIT16 // For AP mode Authenticator. Added by Annie, 2006-01-30.
#define COMP_BEACON BIT17 // For Beacon related, by rcnjko.
#define COMP_ANTENNA BIT18 // For Antenna diversity related, by rcnjko.
#define COMP_RATE BIT19 // For Rate Adaptive mechanism, 2006.07.02, by rcnjko. #define COMP_EVENTS 0x00000080 // Event handling
#define COMP_EVENTS BIT20 // Event handling
#define COMP_FPGA BIT21 // For FPGA verfication
#define COMP_RM BIT22 // For Radio Measurement.
#define COMP_MP BIT23 // For mass production test, by shien chang, 2006.07.13
#define COMP_RXDESC BIT24 // Show Rx desc information for SD3 debug. Added by Annie, 2006-07-15.
#define COMP_CKIP BIT25 // For CCX 1 S13: CKIP. Added by Annie, 2006-08-14.
#define COMP_DIG BIT26 // For DIG, 2006.09.25, by rcnjko.
#define COMP_TXAGC BIT27 // For Tx power, 060928, by rcnjko.
#define COMP_HIPWR BIT28 // For High Power Mechanism, 060928, by rcnjko.
#define COMP_HALDM BIT29 // For HW Dynamic Mechanism, 061010, by rcnjko.
#define COMP_RSNA BIT30 // For RSNA IBSS , 061201, by CCW.
#define COMP_INDIC BIT31 // For link indication
#define COMP_LED BIT32 // For LED.
#define COMP_RF BIT33 // For RF.
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
#define COMP_HT BIT34 // For 802.11n HT related information. by Emily 2006-8-11
#define COMP_POWER_TRACKING BIT35 //FOR 8190 TX POWER TRACKING
#define COMP_RX_REORDER BIT36 // 8190 Rx Reorder
#define COMP_AMSDU BIT37 // For A-MSDU Debugging
#define COMP_WPS BIT38 //WPS Debug Message
#define COMP_RATR BIT39
#define COMP_RESET BIT40
// For debug command to print on dbgview!!
#define COMP_CMD BIT41
#define COMP_EFUSE BIT42
#define COMP_MESH_INTERWORKING BIT43
#define COMP_CCX BIT44 //CCX Debug Flag
#define COMP_IOCTL BIT45 // IO Control
#define COMP_GP BIT46 // For generic parser.
#define COMP_TXAGG BIT47
#define COMP_HVL BIT48 // For Ndis 6.2 Context Swirch and Hardware Virtualiztion Layer
#define COMP_TEST BIT49
#define COMP_BB_POWERSAVING BIT50
#define COMP_SWAS BIT51 // For SW Antenna Switch
#define COMP_P2P BIT52
#define COMP_MUX BIT53
#define COMP_FUNC BIT54
#define COMP_TDLS BIT55
#define COMP_OMNIPEEK BIT56
#define COMP_DUALMACSWITCH BIT60 // 2010/12/27 Add for Dual mac mode debug
#define COMP_EASY_CONCURRENT BIT61 // 2010/12/27 Add for easy cncurrent mode debug
#define COMP_PSD BIT63 //2011/3/9 Add for WLAN PSD for BT AFH
#define COMP_DFS BIT62
#define COMP_ALL UINT64_C(0xFFFFFFFFFFFFFFFF) // All components
// For debug print flag to use
/*------------------------------Define structure----------------------------*/
/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/
/* Defnie structure to store different debug flag variable. Every debug flag
is a UINT32 integer and you can assign 32 different events. */
typedef struct tag_DBGP_Debug_Flag_Structure
{
u4Byte Mans; /* Main Scheduler module. */
u4Byte Rtos; /* RTOS module. */
u4Byte Alarm; /* Alarm module. */
u4Byte Pm; /* Performance monitor module. */
}DBGP_FLAG_T;
/* Define debug print header for every service module.*/
typedef struct tag_DBGP_Service_Module_Header_Name_Structure
{
const char *pMANS;
const char *pRTOS;
const char *pALM;
const char *pPEM;
const char *pCMPK;
const char *pRAPD;
const char *pTXPB;
const char *pQUMG;
}DBGP_HEAD_T;
/* Define different debug flag for dedicated service modules in debug flag array. */
// Each module has independt 32 bit debug flag you cnn define the flag as yout require.
typedef enum tag_DBGP_Flag_Type_Definition
{
FQoS = 0,
FTX = 1,
FRX = 2,
FSEC = 3,
FMGNT = 4,
FMLME = 5,
FRESOURCE = 6,
FBEACON = 7,
FISR = 8,
FPHY = 9,
FMP = 10,
FEEPROM = 11,
FPWR = 12,
FDM = 13,
FDBG_CTRL = 14,
FC2H = 15,
FBT = 16,
FINIT = 17,
FIOCTL = 18,
FSHORT_CUT = 19,
DBGP_TYPE_MAX
}DBGP_FLAG_E;
// Define Qos Relative debug flag bit --> FQoS
#define QoS_INIT BIT0
#define QoS_VISTA BIT1
// Define TX relative debug bit --> FTX
#define TX_DESC BIT0
#define TX_DESC_TID BIT1
#define TX_PATH BIT2
// Define RX relative debug bit --> FRX
#define RX_DATA BIT0
#define RX_PHY_STS BIT1
#define RX_PHY_SS BIT2
#define RX_PHY_SQ BIT3
#define RX_PHY_ASTS BIT4
#define RX_ERR_LEN BIT5
#define RX_DEFRAG BIT6
#define RX_ERR_RATE BIT7
#define RX_PATH BIT8
#define RX_BEACON BIT9
// Define Security relative debug bit --> FSEC
// Define MGNT relative debug bit --> FMGNT
// Define MLME relative debug bit --> FMLME
#define MEDIA_STS BIT0
#define LINK_STS BIT1
// Define OS resource check module bit --> FRESOURCE
#define OS_CHK BIT0
// Define beacon content check module bit --> FBEACON
#define BCN_SHOW BIT0
#define BCN_PEER BIT1
// Define ISR/IMR check module bit --> FISR
#define ISR_CHK BIT0
// Define PHY-BB/RF/MAC check module bit --> FPHY
#define PHY_BBR BIT0
#define PHY_BBW BIT1
#define PHY_RFR BIT2
#define PHY_RFW BIT3
#define PHY_MACR BIT4
#define PHY_MACW BIT5
#define PHY_ALLR BIT6
#define PHY_ALLW BIT7
#define PHY_TXPWR BIT8
#define PHY_PWRDIFF BIT9
#define PHY_SICR BIT10
#define PHY_SICW BIT11
// Define MPT driver check module bit --> FMP
#define MP_RX BIT0
#define MP_SWICH_CH BIT1
// Define EEPROM and EFUSE check module bit --> FEEPROM
#define EEPROM_W BIT0
#define EFUSE_PG BIT1
#define EFUSE_READ_ALL BIT2
#define EFUSE_ANALYSIS BIT3
#define EFUSE_PG_DETAIL BIT4
// Define power save check module bit --> FPWR
#define LPS BIT0
#define IPS BIT1
#define PWRSW BIT2
#define PWRHW BIT3
#define PWRHAL BIT4
// Define Dynamic Mechanism check module bit --> FDM
#define WA_IOT BIT0
#define DM_PWDB BIT1
#define DM_Monitor BIT2
#define DM_DIG BIT3
#define DM_EDCA_Turbo BIT4
#define DM_BT30 BIT5
// Define Dbg Control module bit --> FDBG_CTRL
#define DBG_CTRL_TRACE BIT0
#define DBG_CTRL_INBAND_NOISE BIT1
// Define FW C2H Cmd check module bit --> FC2H
#define C2H_Summary BIT0
#define C2H_PacketData BIT1
#define C2H_ContentData BIT2
// Define BT Cmd check module bit --> FBT
#define BT_TRACE BIT0
#define BT_RFPoll BIT1
// Define init check for module bit --> FINIT
#define INIT_EEPROM BIT0
#define INIT_TxPower BIT1
#define INIT_IQK BIT2
#define INIT_RF BIT3
// Define IOCTL Cmd check module bit --> FIOCTL
// section 1 : IRP related
#define IOCTL_IRP BIT0
#define IOCTL_IRP_DETAIL BIT1
#define IOCTL_IRP_STATISTICS BIT2
#define IOCTL_IRP_HANDLE BIT3
// section 2 : HCI command/event
#define IOCTL_BT_HCICMD BIT8
#define IOCTL_BT_HCICMD_DETAIL BIT9
#define IOCTL_BT_HCICMD_EXT BIT10
#define IOCTL_BT_EVENT BIT11
#define IOCTL_BT_EVENT_DETAIL BIT12
#define IOCTL_BT_EVENT_PERIODICAL BIT13
// section 3 : BT tx/rx data and throughput
#define IOCTL_BT_TX_ACLDATA BIT16
#define IOCTL_BT_TX_ACLDATA_DETAIL BIT17
#define IOCTL_BT_RX_ACLDATA BIT18
#define IOCTL_BT_RX_ACLDATA_DETAIL BIT19
#define IOCTL_BT_TP BIT20
// section 4 : BT connection state machine.
#define IOCTL_STATE BIT21
#define IOCTL_BT_LOGO BIT22
// section 5 : BT function trace
#define IOCTL_CALLBACK_FUN BIT24
#define IOCTL_PARSE_BT_PKT BIT25
#define IOCTL_BT_TX_PKT BIT26
#define IOCTL_BT_FLAG_MON BIT27
//
// Define init check for module bit --> FSHORT_CUT
// 2011/07/20 MH Add for short but definition.
//
#define SHCUT_TX BIT0
#define SHCUT_RX BIT1
/* 2007/07/13 MH *//*------For DeBuG Print modeue------*/
/*------------------------------Define structure----------------------------*/
/*------------------------Export Marco Definition---------------------------*/
#if (DM_ODM_SUPPORT_TYPE != ODM_MP)
#define RT_PRINTK(fmt, args...) printk( "%s(): " fmt, __FUNCTION__, ## args);
#if DBG
#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt) \
if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \
{ \
RT_PRINTK fmt; \
}
#define RT_TRACE_F(comp, level, fmt) \
if(((comp) & GlobalDebugComponents) && (level <= GlobalDebugLevel)) \
{ \
RT_PRINTK fmt; \
}
#define RT_ASSERT(expr,fmt) \
if(!(expr)) { \
printk( "Assertion failed! %s at ......\n", #expr); \
printk( " ......%s,%s,line=%d\n",__FILE__,__FUNCTION__,__LINE__); \
}
#define dbg_enter() { printk("==> %s\n", __FUNCTION__); }
#define dbg_exit() { printk("<== %s\n", __FUNCTION__); }
#define dbg_trace(str) { printk("%s:%s\n", __FUNCTION__, str); }
#else
#define ODM_RT_TRACE(pDM_Odm,comp, level, fmt)
#define RT_TRACE_F(comp, level, fmt)
#define RT_ASSERT(expr, fmt)
#define dbg_enter()
#define dbg_exit()
#define dbg_trace(str)
#endif
#if DBG
#define DbgPrint printk
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen) \
{ \
char *szTitle = _TitleString; \
pu1Byte pbtHexData = _HexData; \
u4Byte u4bHexDataLen = _HexDataLen; \
u4Byte __i; \
DbgPrint("%s", szTitle); \
for (__i=0;__i<u4bHexDataLen;__i++) \
{ \
if ((__i & 15) == 0) \
{ \
DbgPrint("\n"); \
} \
DbgPrint("%02X%s", pbtHexData[__i], ( ((__i&3)==3) ? " " : " ") ); \
} \
DbgPrint("\n"); \
}
// RT_PRINT_XXX macros: implemented for debugging purpose.
// Added by Annie, 2005-11-21.
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen) \
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
{ \
int __i; \
pu1Byte ptr = (pu1Byte)_HexData; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
{ \
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" "); \
if (((__i + 1) % 16) == 0) DbgPrint("\n"); \
} \
DbgPrint("\n"); \
}
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr) \
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
{ \
int __i; \
pu1Byte ptr = (pu1Byte)_Ptr; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint(" "); \
for( __i=0; __i<6; __i++ ) \
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
DbgPrint("\n"); \
}
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum) \
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
{ \
int __i, __j; \
pu1Byte ptr = (pu1Byte)_Ptr; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint("\n"); \
for( __i=0; __i<(int)_AddNum; __i++ ) \
{ \
for( __j=0; __j<6; __j++ ) \
DbgPrint("%02X%s", ptr[__i*6+__j], (__j==5)?"":"-"); \
DbgPrint("\n"); \
} \
}
// Added by Annie, 2005-11-22.
#define MAX_STR_LEN 64
#define PRINTABLE(_ch) (_ch>=' ' &&_ch<='~' ) // I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len) \
if(((_Comp) & GlobalDebugComponents) && (_Level <= GlobalDebugLevel)) \
{ \
int __i; \
u1Byte buffer[MAX_STR_LEN]; \
int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
PlatformZeroMemory( buffer, MAX_STR_LEN ); \
PlatformMoveMemory( buffer, (pu1Byte)_Ptr, length ); \
for( __i=0; __i<MAX_STR_LEN; __i++ ) \
{ \
if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
} \
buffer[length] = '\0'; \
DbgPrint("Rtl819x: "); \
DbgPrint(_TitleString); \
DbgPrint(": %d, <%s>\n", _Len, buffer); \
}
#else // of #if DBG
#define DbgPrint(...)
#define PRINT_DATA(_TitleString, _HexData, _HexDataLen)
#define RT_PRINT_DATA(_Comp, _Level, _TitleString, _HexData, _HexDataLen)
#define RT_PRINT_ADDR(_Comp, _Level, _TitleString, _Ptr)
#define RT_PRINT_ADDRS(_Comp, _Level, _TitleString, _Ptr, _AddNum)
#define RT_PRINT_STR(_Comp, _Level, _TitleString, _Ptr, _Len)
#endif // of #if DBG
#endif // #if (DM_ODM_SUPPORT_TYPE != ODM_MP)
#define DEBUG_PRINT 1
// Please add new OS's print API by yourself
//#if (RT_PLATFORM==PLATFORM_WINDOWS)
#if (DEBUG_PRINT == 1) && DBG
#define RTPRINT(dbgtype, dbgflag, printstr)\
{\
if (DBGP_Type[dbgtype] & dbgflag)\
{\
DbgPrint printstr;\
}\
}
#define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr)\
{\
if (DBGP_Type[dbgtype] & dbgflag)\
{\
int __i; \
pu1Byte ptr = (pu1Byte)_Ptr; \
DbgPrint printstr; \
DbgPrint(" "); \
for( __i=0; __i<6; __i++ ) \
DbgPrint("%02X%s", ptr[__i], (__i==5)?"":"-"); \
DbgPrint("\n"); \
}\
}
#define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)\
{\
if (DBGP_Type[dbgtype] & dbgflag)\
{\
int __i; \
pu1Byte ptr = (pu1Byte)_HexData; \
DbgPrint(_TitleString); \
for( __i=0; __i<(int)_HexDataLen; __i++ ) \
{ \
DbgPrint("%02X%s", ptr[__i], (((__i + 1) % 4) == 0)?" ":" ");\
if (((__i + 1) % 16) == 0) DbgPrint("\n");\
} \
DbgPrint("\n"); \
}\
}
#define FuncEntry FunctionIn(COMP_FUNC)
#define FuncExit FunctionOut(COMP_FUNC)
#define FunctionIn(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("==========> %s\n", __FUNCTION__))
#define FunctionOut(_comp) ODM_RT_TRACE(pDM_Odm,(_comp), DBG_LOUD, ("<========== %s\n", __FUNCTION__))
#else
#define DBGP(dbgtype, dbgflag, printstr)
#define RTPRINT(dbgtype, dbgflag, printstr)
#define RTPRINT_ADDR(dbgtype, dbgflag, printstr, _Ptr)
#define RTPRINT_DATA(dbgtype, dbgflag, _TitleString, _HexData, _HexDataLen)
#define FuncEntry
#define FuncExit
#define FunctionIn(_comp)
#define FunctionOut(_comp)
#endif
/*------------------------Export Marco Definition---------------------------*/
/*------------------------Export global variable----------------------------*/
extern u4Byte DBGP_Type[DBGP_TYPE_MAX];
extern DBGP_HEAD_T DBGP_Head;
/*------------------------Export global variable----------------------------*/
/*--------------------------Exported Function prototype---------------------*/
extern void DBGP_Flag_Init(void);
extern void DBG_PrintAllFlag(void);
extern void DBG_PrintAllComp(void);
extern void DBG_PrintFlagEvent(u1Byte DbgFlag);
extern void DBG_DumpMem(const u1Byte DbgComp,
const u1Byte DbgLevel,
pu1Byte pMem,
u2Byte Len);
/*--------------------------Exported Function prototype---------------------*/
extern u4Byte GlobalDebugLevel;
extern u8Byte GlobalDebugComponents;
#endif
#endif // __ODM_DBG_H__