rtl8188eu/include/drv_types.h
Larry Finger 19db43ecbd rtl8188eu: Backport kernel version
This driver was added to the kernel with version 3.12. The changes in that
version are now brought back to the GitHub repo. Essentually all of the code
is updated.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-10-19 12:45:47 -05:00

334 lines
7.8 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*-----------------------------------------------------------------------------
For type defines and data structure defines
------------------------------------------------------------------------------*/
#ifndef __DRV_TYPES_H__
#define __DRV_TYPES_H__
#define DRV_NAME "r8188eu"
#include <osdep_service.h>
#include <wlan_bssdef.h>
#include <drv_types_linux.h>
#include <rtw_ht.h>
#include <rtw_cmd.h>
#include <rtw_xmit.h>
#include <rtw_recv.h>
#include <hal_intf.h>
#include <hal_com.h>
#include <rtw_qos.h>
#include <rtw_security.h>
#include <rtw_pwrctrl.h>
#include <rtw_io.h>
#include <rtw_eeprom.h>
#include <sta_info.h>
#include <rtw_mlme.h>
#include <rtw_debug.h>
#include <rtw_rf.h>
#include <rtw_event.h>
#include <rtw_led.h>
#include <rtw_mlme_ext.h>
#include <rtw_p2p.h>
#include <rtw_ap.h>
#include <rtw_mp.h>
#include <rtw_br_ext.h>
enum _NIC_VERSION {
RTL8711_NIC,
RTL8712_NIC,
RTL8713_NIC,
RTL8716_NIC
};
#define SPEC_DEV_ID_NONE BIT(0)
#define SPEC_DEV_ID_DISABLE_HT BIT(1)
#define SPEC_DEV_ID_ENABLE_PS BIT(2)
#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
struct specific_device_id {
u32 flags;
u16 idVendor;
u16 idProduct;
};
struct registry_priv {
u8 chip_version;
u8 rfintfs;
u8 lbkmode;
u8 hci;
struct ndis_802_11_ssid ssid;
u8 network_mode; /* infra, ad-hoc, auto */
u8 channel;/* ad-hoc support requirement */
u8 wireless_mode;/* A, B, G, auto */
u8 scan_mode;/* active, passive */
u8 radio_enable;
u8 preamble;/* long, short, auto */
u8 vrtl_carrier_sense;/* Enable, Disable, Auto */
u8 vcs_type;/* RTS/CTS, CTS-to-self */
u16 rts_thresh;
u16 frag_thresh;
u8 adhoc_tx_pwr;
u8 soft_ap;
u8 power_mgnt;
u8 ips_mode;
u8 smart_ps;
u8 long_retry_lmt;
u8 short_retry_lmt;
u16 busy_thresh;
u8 ack_policy;
u8 mp_mode;
u8 software_encrypt;
u8 software_decrypt;
u8 acm_method;
/* UAPSD */
u8 wmm_enable;
u8 uapsd_enable;
u8 uapsd_max_sp;
u8 uapsd_acbk_en;
u8 uapsd_acbe_en;
u8 uapsd_acvi_en;
u8 uapsd_acvo_en;
struct wlan_bssid_ex dev_network;
u8 ht_enable;
u8 cbw40_enable;
u8 ampdu_enable;/* for tx */
u8 rx_stbc;
u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
u8 lowrate_two_xmit;
u8 rf_config;
u8 low_power;
u8 wifi_spec;/* !turbo_mode */
u8 channel_plan;
bool bAcceptAddbaReq;
u8 antdiv_cfg;
u8 antdiv_type;
u8 usbss_enable;/* 0:disable,1:enable */
u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
u8 hwpwrp_detect;/* 0:disable,1:enable */
u8 hw_wps_pbc;/* 0:disable,1:enable */
u8 max_roaming_times; /* the max number driver will try */
u8 fw_iol; /* enable iol without other concern */
u8 enable80211d;
u8 ifname[16];
u8 if2name[16];
u8 notch_filter;
};
/* For registry parameters */
#define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field))
#define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field)
#define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field))
#define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field)
#define MAX_CONTINUAL_URB_ERR 4
struct dvobj_priv {
struct adapter *if1;
struct adapter *if2;
/* For 92D, DMDP have 2 interface. */
u8 InterfaceNumber;
u8 NumInterfaces;
/* In /Out Pipe information */
int RtInPipe[2];
int RtOutPipe[3];
u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
u8 irq_alloc;
/*-------- below is for USB INTERFACE --------*/
u8 nr_endpoint;
u8 ishighspeed;
u8 RtNumInPipes;
u8 RtNumOutPipes;
int ep_num[5]; /* endpoint number */
int RegUsbSS;
struct semaphore usb_suspend_sema;
struct mutex usb_vendor_req_mutex;
u8 *usb_alloc_vendor_req_buf;
u8 *usb_vendor_req_buf;
struct usb_interface *pusbintf;
struct usb_device *pusbdev;
ATOMIC_T continual_urb_error;
};
static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
{
/* todo: get interface type from dvobj and the return
* the dev accordingly */
return &dvobj->pusbintf->dev;
};
enum _IFACE_TYPE {
IFACE_PORT0, /* mapping to port0 for C/D series chips */
IFACE_PORT1, /* mapping to port1 for C/D series chip */
MAX_IFACE_PORT,
};
enum _ADAPTER_TYPE {
PRIMARY_ADAPTER,
SECONDARY_ADAPTER,
MAX_ADAPTER,
};
enum driver_state {
DRIVER_NORMAL = 0,
DRIVER_DISAPPEAR = 1,
DRIVER_REPLACE_DONGLE = 2,
};
struct adapter {
int DriverState;/* for disable driver using module, use dongle toi
* replace module. */
int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
int bDongle;/* build-in module or external dongle */
u16 chip_type;
u16 HardwareType;
u16 interface_type;/* USB,SDIO,SPI,PCI */
struct dvobj_priv *dvobj;
struct mlme_priv mlmepriv;
struct mlme_ext_priv mlmeextpriv;
struct cmd_priv cmdpriv;
struct evt_priv evtpriv;
struct io_priv iopriv;
struct xmit_priv xmitpriv;
struct recv_priv recvpriv;
struct sta_priv stapriv;
struct security_priv securitypriv;
struct registry_priv registrypriv;
struct pwrctrl_priv pwrctrlpriv;
struct eeprom_priv eeprompriv;
struct led_priv ledpriv;
struct mp_priv mppriv;
#ifdef CONFIG_88EU_AP_MODE
struct hostapd_priv *phostapdpriv;
#endif
struct wifidirect_info wdinfo;
void *HalData;
u32 hal_data_sz;
struct hal_ops HalFunc;
s32 bDriverStopped;
s32 bSurpriseRemoved;
s32 bCardDisableWOHSM;
u32 IsrContent;
u32 ImrContent;
u8 EepromAddressSize;
u8 hw_init_completed;
u8 bDriverIsGoingToUnload;
u8 init_adpt_in_progress;
u8 bHaltInProgress;
void *cmdThread;
void *evtThread;
void *xmitThread;
void *recvThread;
void (*intf_start)(struct adapter *adapter);
void (*intf_stop)(struct adapter *adapter);
struct net_device *pnetdev;
/* used by rtw_rereg_nd_name related function */
struct rereg_nd_name_data {
struct net_device *old_pnetdev;
char old_ifname[IFNAMSIZ];
u8 old_ips_mode;
u8 old_bRegUseLed;
} rereg_nd_name_priv;
int bup;
struct net_device_stats stats;
struct iw_statistics iwstats;
struct proc_dir_entry *dir_dev;/* for proc directory */
int net_closed;
u8 bFWReady;
u8 bBTFWReady;
u8 bReadPortCancel;
u8 bWritePortCancel;
u8 bRxRSSIDisplay;
/* The driver will show up the desired channel number
* when this flag is 1. */
u8 bNotifyChannelChange;
#ifdef CONFIG_88EU_P2P
/* The driver will show the current P2P status when the
* upper application reads it. */
u8 bShowGetP2PState;
#endif
struct adapter *pbuddy_adapter;
struct mutex *hw_init_mutex;
spinlock_t br_ext_lock;
struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE];
int pppoe_connection_in_progress;
unsigned char pppoe_addr[MACADDRLEN];
unsigned char scdb_mac[MACADDRLEN];
unsigned char scdb_ip[4];
struct nat25_network_db_entry *scdb_entry;
unsigned char br_mac[MACADDRLEN];
unsigned char br_ip[4];
struct br_ext_info ethBrExtInfo;
u8 fix_rate;
unsigned char in_cta_test;
};
#define adapter_to_dvobj(adapter) (adapter->dvobj)
int rtw_handle_dualmac(struct adapter *adapter, bool init);
static inline u8 *myid(struct eeprom_priv *peepriv)
{
return peepriv->mac_addr;
}
#endif /* __DRV_TYPES_H__ */