skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-28 15:13:39 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/include/rtl8188e_hal.h
Larry Finger 2bd2f4b4c8 rtl8188eu: Convert typedef for _adapter, etc. 
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-07-26 20:08:39 -05:00

500 lines
16 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8188E_HAL_H__
#define __RTL8188E_HAL_H__
//include HAL Related header after HAL Related compiling flags
#include "rtl8188e_spec.h"
#include "Hal8188EPhyReg.h"
#include "Hal8188EPhyCfg.h"
#include "rtl8188e_rf.h"
#include "rtl8188e_dm.h"
#include "rtl8188e_recv.h"
#include "rtl8188e_xmit.h"
#include "rtl8188e_cmd.h"
#include "Hal8188EPwrSeq.h"
#include "rtl8188e_sreset.h"
#include "rtw_efuse.h"
#include "odm_precomp.h"
// Fw Array
#define Rtl8188E_FwImageArray Rtl8188EFwImgArray
#define Rtl8188E_FWImgArrayLength Rtl8188EFWImgArrayLength
#ifdef CONFIG_WOWLAN
#define Rtl8188E_FwWoWImageArray Array_8188E_FW_WoWLAN
#define Rtl8188E_FwWoWImgArrayLength ArrayLength_8188E_FW_WoWLAN
#endif //CONFIG_WOWLAN
#define RTL8188E_FW_UMC_IMG "rtl8188E\\rtl8188efw.bin"
#define RTL8188E_PHY_REG "rtl8188E\\PHY_REG_1T.txt"
#define RTL8188E_PHY_RADIO_A "rtl8188E\\radio_a_1T.txt"
#define RTL8188E_PHY_RADIO_B "rtl8188E\\radio_b_1T.txt"
#define RTL8188E_AGC_TAB "rtl8188E\\AGC_TAB_1T.txt"
#define RTL8188E_PHY_MACREG "rtl8188E\\MAC_REG.txt"
#define RTL8188E_PHY_REG_PG "rtl8188E\\PHY_REG_PG.txt"
#define RTL8188E_PHY_REG_MP "rtl8188E\\PHY_REG_MP.txt"
//---------------------------------------------------------------------
// RTL8188E Power Configuration CMDs for USB/SDIO interfaces
//---------------------------------------------------------------------
#define Rtl8188E_NIC_PWR_ON_FLOW rtl8188E_power_on_flow
#define Rtl8188E_NIC_RF_OFF_FLOW rtl8188E_radio_off_flow
#define Rtl8188E_NIC_DISABLE_FLOW rtl8188E_card_disable_flow
#define Rtl8188E_NIC_ENABLE_FLOW rtl8188E_card_enable_flow
#define Rtl8188E_NIC_SUSPEND_FLOW rtl8188E_suspend_flow
#define Rtl8188E_NIC_RESUME_FLOW rtl8188E_resume_flow
#define Rtl8188E_NIC_PDN_FLOW rtl8188E_hwpdn_flow
#define Rtl8188E_NIC_LPS_ENTER_FLOW rtl8188E_enter_lps_flow
#define Rtl8188E_NIC_LPS_LEAVE_FLOW rtl8188E_leave_lps_flow
#define DRVINFO_SZ 4 // unit is 8bytes
#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
// download firmware related data structure
#define FW_8188E_SIZE 0x4000 //16384,16k
#define FW_8188E_START_ADDRESS 0x1000
#define FW_8188E_END_ADDRESS 0x1FFF //0x5FFF
#define MAX_PAGE_SIZE 4096 // @ page : 4k bytes
#define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300 ||\
(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88E0)
enum firmware_source {
FW_SOURCE_IMG_FILE = 0,
FW_SOURCE_HEADER_FILE = 1, //from header file
};
struct rt_firmware {
enum firmware_source eFWSource;
u8* szFwBuffer;
u32 ulFwLength;
#ifdef CONFIG_WOWLAN
u8* szWoWLANFwBuffer;
u32 ulWoWLANFwLength;
#endif //CONFIG_WOWLAN
};
// This structure must be careful with byte-ordering
struct rt_firmware_hdr {
// 8-byte alinment required
//--- LONG WORD 0 ----
__le16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut
u8 Category; // AP/NIC and USB/PCI
u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions
__le16 Version; // FW Version
u8 Subversion; // FW Subversion, default 0x00
u16 Rsvd1;
//--- LONG WORD 1 ----
u8 Month; // Release time Month field
u8 Date; // Release time Date field
u8 Hour; // Release time Hour field
u8 Minute; // Release time Minute field
__le16 RamCodeSize; // The size of RAM code
u8 Foundry;
u8 Rsvd2;
//--- LONG WORD 2 ----
__le32 SvnIdx; // The SVN entry index
u32 Rsvd3;
//--- LONG WORD 3 ----
u32 Rsvd4;
u32 Rsvd5;
};
#define DRIVER_EARLY_INT_TIME 0x05
#define BCN_DMA_ATIME_INT_TIME 0x02
enum usb_rx_agg_mode {
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
USB_RX_AGG_USB,
USB_RX_AGG_MIX
};
#define MAX_RX_DMA_BUFFER_SIZE_88E 0x2400 //9k for 88E nornal chip , //MaxRxBuff=10k-max(TxReportSize(64*8), WOLPattern(16*24))
#define MAX_TX_REPORT_BUFFER_SIZE 0x0400 // 1k
// BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON.
#define MAX_TX_QUEUE 9
#define TX_SELE_HQ BIT(0) // High Queue
#define TX_SELE_LQ BIT(1) // Low Queue
#define TX_SELE_NQ BIT(2) // Normal Queue
// Note: We will divide number of page equally for each queue other than public queue!
// 22k = 22528 bytes = 176 pages (@page = 128 bytes)
// must reserved about 7 pages for LPS => 176-7 = 169 (0xA9)
// 2*BCN / 1*ps-poll / 1*null-data /1*prob_rsp /1*QOS null-data /1*BT QOS null-data
#define TX_TOTAL_PAGE_NUMBER_88E 0xA9// 169 (21632=> 21k)
#define TX_PAGE_BOUNDARY_88E (TX_TOTAL_PAGE_NUMBER_88E + 1)
//Note: For Normal Chip Setting ,modify later
#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER TX_TOTAL_PAGE_NUMBER_88E //0xA9 , 0xb0=>176=>22k
#define WMM_NORMAL_TX_PAGE_BOUNDARY_88E (WMM_NORMAL_TX_TOTAL_PAGE_NUMBER + 1) //0xA9
//-------------------------------------------------------------------------
// Chip specific
//-------------------------------------------------------------------------
#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
#define CHIP_BONDING_92C_1T2R 0x1
#define CHIP_BONDING_88C_USB_MCARD 0x2
#define CHIP_BONDING_88C_USB_HP 0x1
#include "HalVerDef.h"
#include "hal_com.h"
//-------------------------------------------------------------------------
// Channel Plan
//-------------------------------------------------------------------------
enum ChannelPlan
{
CHPL_FCC = 0,
CHPL_IC = 1,
CHPL_ETSI = 2,
CHPL_SPA = 3,
CHPL_FRANCE = 4,
CHPL_MKK = 5,
CHPL_MKK1 = 6,
CHPL_ISRAEL = 7,
CHPL_TELEC = 8,
CHPL_GLOBAL = 9,
CHPL_WORLD = 10,
};
struct txpowerinfo24g {
u1Byte IndexCCK_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G];
u1Byte IndexBW40_Base[MAX_RF_PATH][MAX_CHNL_GROUP_24G-1];
//If only one tx, only BW20 and OFDM are used.
s1Byte CCK_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s1Byte OFDM_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s1Byte BW20_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s1Byte BW40_Diff[MAX_RF_PATH][MAX_TX_COUNT];
};
#define EFUSE_REAL_CONTENT_LEN 512
#define EFUSE_MAP_LEN 128
#define EFUSE_MAX_SECTION 16
#define EFUSE_IC_ID_OFFSET 506 //For some inferiority IC purpose. added by Roger, 2009.09.02.
#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
//
// <Roger_Notes>
// To prevent out of boundary programming case,
// leave 1byte and program full section
// 9bytes + 1byt + 5bytes and pre 1byte.
// For worst case:
// | 1byte|----8bytes----|1byte|--5bytes--|
// | | Reserved(14bytes) |
//
#define EFUSE_OOB_PROTECT_BYTES 15 // PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte.
#define HWSET_MAX_SIZE_88E 512
#define EFUSE_REAL_CONTENT_LEN_88E 256
#define EFUSE_MAP_LEN_88E 512
#define EFUSE_MAX_SECTION_88E 64
#define EFUSE_MAX_WORD_UNIT_88E 4
#define EFUSE_IC_ID_OFFSET_88E 506 //For some inferiority IC purpose. added by Roger, 2009.09.02.
#define AVAILABLE_EFUSE_ADDR_88E(addr) (addr < EFUSE_REAL_CONTENT_LEN_88E)
// <Roger_Notes> To prevent out of boundary programming case, leave 1byte and program full section
// 9bytes + 1byt + 5bytes and pre 1byte.
// For worst case:
// | 2byte|----8bytes----|1byte|--7bytes--| //92D
#define EFUSE_OOB_PROTECT_BYTES_88E 18 // PG data exclude header, dummy 7 bytes frome CP test and reserved 1byte.
#define EFUSE_PROTECT_BYTES_BANK_88E 16
//========================================================
// EFUSE for BT definition
//========================================================
#define EFUSE_BT_REAL_CONTENT_LEN 1536 // 512*3
#define EFUSE_BT_MAP_LEN 1024 // 1k bytes
#define EFUSE_BT_MAX_SECTION 128 // 1024/8
#define EFUSE_PROTECT_BYTES_BANK 16
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
enum rt_multi_func {
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
};
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
enum rt_polarity_ctl {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
};
// For RTL8723 regulator mode. by tynli. 2011.01.14.
enum rt_regulator_mode {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
};
struct hal_data_8188e {
struct HAL_VERSION VersionID;
enum rt_multi_func MultiFunc; // For multi-function consideration.
enum rt_polarity_ctl PolarityCtl; // For Wifi PDn Polarity control.
enum rt_regulator_mode RegulatorMode; // switching regulator or LDO
u16 CustomerID;
u16 FirmwareVersion;
u16 FirmwareVersionRev;
u16 FirmwareSubVersion;
u16 FirmwareSignature;
u8 PGMaxGroup;
//current WIFI_PHY values
u32 ReceiveConfig;
enum wireless_mode CurrentWirelessMode;
enum ht_channel_width CurrentChannelBW;
u8 CurrentChannel;
u8 nCur40MhzPrimeSC;// Control channel sub-carrier
u16 BasicRateSet;
//rf_ctrl
u8 rf_chip;
u8 rf_type;
u8 NumTotalRFPath;
u8 BoardType;
//
// EEPROM setting.
//
u16 EEPROMVID;
u16 EEPROMPID;
u16 EEPROMSVID;
u16 EEPROMSDID;
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMVersion;
u8 EEPROMRegulatory;
u8 bTXPowerDataReadFromEEPORM;
u8 EEPROMThermalMeter;
u8 bAPKThermalMeterIgnore;
bool EepromOrEfuse;
u8 EfuseMap[2][HWSET_MAX_SIZE_512]; //92C:256bytes, 88E:512bytes, we use union set (512bytes)
u8 EfuseUsedPercentage;
struct efuse_hal EfuseHal;
//u8 bIQKInitialized;
u8 Index24G_CCK_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
u8 Index24G_BW40_Base[MAX_RF_PATH][CHANNEL_MAX_NUMBER];
//If only one tx, only BW20 and OFDM are used.
s8 CCK_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 OFDM_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW20_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
s8 BW40_24G_Diff[MAX_RF_PATH][MAX_TX_COUNT];
u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
// For power group
u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff
// The current Tx Power Level
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
u8 CurrentBW2024GTxPwrIdx;
u8 CurrentBW4024GTxPwrIdx;
// Read/write are allow for following hardware information variables
u8 framesync;
u32 framesyncC34;
u8 framesyncMonitor;
u8 DefaultInitialGain[4];
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[MAX_PG_GROUP][16];
u32 CCKTxPowerLevelOriginalOffset;
u8 CrystalCap;
u32 AntennaTxPath; // Antenna path Tx
u32 AntennaRxPath; // Antenna path Rx
u8 BluetoothCoexist;
u8 ExternalPA;
u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
u8 b1x1RecvCombine; // for 1T1R receive combining
u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo.
struct bb_reg_def PHYRegDef[4]; //Radio A/B/C/D
u32 RfRegChnlVal[2];
//RDG enable
bool bRDGEnable;
//for host message to fw
u8 LastHMEBoxNum;
u8 fw_ractrl;
u8 RegTxPause;
// Beacon function related global variable.
u32 RegBcnCtrlVal;
u8 RegFwHwTxQCtrl;
u8 RegReg542;
u8 RegCR_1;
struct dm_priv dmpriv;
struct odm_dm_struct odmpriv;
struct sreset_priv srestpriv;
#ifdef CONFIG_BT_COEXIST
struct btcoexist_priv bt_coexist;
#endif
u8 CurAntenna;
u8 AntDivCfg;
u8 TRxAntDivType;
u8 bDumpRxPkt;//for debug
u8 bDumpTxPkt;//for debug
u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
// 2010/08/09 MH Add CU power down mode.
bool pwrdown;
// Add for dual MAC 0--Mac0 1--Mac1
u32 interfaceIndex;
u8 OutEpQueueSel;
u8 OutEpNumber;
// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
bool UsbRxHighSpeedMode;
// 2010/11/22 MH Add for slim combo debug mode selective.
// This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock.
bool SlimComboDbg;
u16 EfuseUsedBytes;
#ifdef CONFIG_P2P
struct P2P_PS_Offload_t p2p_ps_offload;
#endif
// Auto FSM to Turn On, include clock, isolation, power control for MAC only
u8 bMacPwrCtrlOn;
u32 UsbBulkOutSize;
// Interrupt relatd register information.
u32 IntArray[3];//HISR0,HISR1,HSISR
u32 IntrMask[3];
u8 C2hArray[16];
u8 UsbTxAggMode;
u8 UsbTxAggDescNum;
u16 HwRxPageSize; // Hardware setting
u32 MaxUsbRxAggBlock;
enum usb_rx_agg_mode UsbRxAggMode;
u8 UsbRxAggBlockCount; // USB Block count. Block size is 512-byte in hight speed and 64-byte in full speed
u8 UsbRxAggBlockTimeout;
u8 UsbRxAggPageCount; // 8192C DMA page count
u8 UsbRxAggPageTimeout;
};
#define GET_HAL_DATA(__pAdapter) ((struct hal_data_8188e *)((__pAdapter)->HalData))
#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
// rtl8188e_hal_init.c
#ifdef CONFIG_WOWLAN
s32 rtl8188e_FirmwareDownload(struct adapter * padapter, bool bUsedWoWLANFw);
#else
s32 rtl8188e_FirmwareDownload(struct adapter * padapter);
#endif
void _8051Reset88E(struct adapter * padapter);
void rtl8188e_InitializeFirmwareVars(struct adapter * padapter);
s32 InitLLTTable(struct adapter * padapter, u8 txpktbuf_bndy);
// EFuse
u8 GetEEPROMSize8188E(struct adapter * padapter);
void Hal_InitPGData88E(struct adapter * padapter);
void Hal_EfuseParseIDCode88E(struct adapter * padapter, u8 *hwinfo);
void Hal_ReadTxPowerInfo88E(struct adapter * padapter,u8* hwinfo,bool AutoLoadFail);
void Hal_EfuseParseEEPROMVer88E(struct adapter * padapter, u8 *hwinfo, bool AutoLoadFail);
void rtl8188e_EfuseParseChnlPlan(struct adapter * padapter, u8 *hwinfo, bool AutoLoadFail);
void Hal_EfuseParseCustomerID88E(struct adapter * padapter, u8 *hwinfo, bool AutoLoadFail);
void Hal_ReadAntennaDiversity88E (struct adapter * pAdapter,u8*PROMContent,bool AutoLoadFail);
void Hal_ReadThermalMeter_88E(struct adapter * Adapter,u8* PROMContent,bool AutoloadFail);
void Hal_EfuseParseXtal_8188E(struct adapter * pAdapter,u8* hwinfo,bool AutoLoadFail);
void Hal_EfuseParseBoardType88E(struct adapter * pAdapter,u8* hwinfo,bool AutoLoadFail);
void Hal_ReadPowerSavingMode88E(struct adapter * pAdapter,u8* hwinfo,bool AutoLoadFail);
bool HalDetectPwrDownMode88E(struct adapter * Adapter);
#ifdef CONFIG_WOWLAN
void Hal_DetectWoWMode(struct adapter * pAdapter);
#endif //CONFIG_WOWLAN
void Hal_InitChannelPlan(struct adapter * padapter);
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc);
// register
void SetBcnCtrlReg(struct adapter * padapter, u8 SetBits, u8 ClearBits);
void rtl8188e_clone_haldata(struct adapter *dst_adapter, struct adapter *src_adapter);
void rtl8188e_start_thread(struct adapter *padapter);
void rtl8188e_stop_thread(struct adapter *padapter);
void rtw_IOL_cmd_tx_pkt_buf_dump(struct adapter *Adapter,int data_len);
s32 rtl8188e_iol_efuse_patch(struct adapter * padapter);
#endif //__RTL8188E_HAL_H__
Reference in a new issue View git blame Copy permalink