rtl8188eu/include/Hal8192CPhyCfg.h
Larry Finger 85df502f5b Initial commit of flattened driver to repo
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-05-08 16:45:39 -05:00

395 lines
12 KiB
C
Executable file

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*****************************************************************************
* Module: __INC_HAL8192CPHYCFG_H
*
*
* Note:
*
*
* Export: Constants, macro, functions(API), global variables(None).
*
* Abbrev:
*
* History:
* Data Who Remark
* 08/07/2007 MHC 1. Porting from 9x series PHYCFG.h.
* 2. Reorganize code architecture.
*
*****************************************************************************/
/* Check to see if the file has been included already. */
#ifndef __INC_HAL8192CPHYCFG_H
#define __INC_HAL8192CPHYCFG_H
/*--------------------------Define Parameters-------------------------------*/
#define LOOP_LIMIT 5
#define MAX_STALL_TIME 50 //us
#define AntennaDiversityValue 0x80 //(Adapter->bSoftwareAntennaDiversity ? 0x00:0x80)
#define MAX_TXPWR_IDX_NMODE_92S 63
#define Reset_Cnt_Limit 3
#ifdef CONFIG_PCI_HCI
#define MAX_AGGR_NUM 0x0A0A
#else
#define MAX_AGGR_NUM 0x0909
#endif
#ifdef CONFIG_PCI_HCI
#define SET_RTL8192SE_RF_SLEEP(_pAdapter) \
{ \
u1Byte u1bTmp; \
u1bTmp = PlatformEFIORead1Byte(_pAdapter, REG_LDOV12D_CTRL); \
u1bTmp |= BIT0; \
PlatformEFIOWrite1Byte(_pAdapter, REG_LDOV12D_CTRL, u1bTmp); \
PlatformEFIOWrite1Byte(_pAdapter, REG_SPS_OCP_CFG, 0x0); \
PlatformEFIOWrite1Byte(_pAdapter, TXPAUSE, 0xFF); \
PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \
delay_us(100); \
PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \
PlatformEFIOWrite1Byte(_pAdapter, PHY_CCA, 0x0); \
delay_us(10); \
PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x37FC); \
delay_us(10); \
PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x77FC); \
delay_us(10); \
PlatformEFIOWrite2Byte(_pAdapter, CMDR, 0x57FC); \
}
#endif
/*--------------------------Define Parameters-------------------------------*/
/*------------------------------Define structure----------------------------*/
typedef enum _SwChnlCmdID{
CmdID_End,
CmdID_SetTxPowerLevel,
CmdID_BBRegWrite10,
CmdID_WritePortUlong,
CmdID_WritePortUshort,
CmdID_WritePortUchar,
CmdID_RF_WriteReg,
}SwChnlCmdID;
/* 1. Switch channel related */
typedef struct _SwChnlCmd{
SwChnlCmdID CmdID;
u32 Para1;
u32 Para2;
u32 msDelay;
}SwChnlCmd;
typedef enum _HW90_BLOCK{
HW90_BLOCK_MAC = 0,
HW90_BLOCK_PHY0 = 1,
HW90_BLOCK_PHY1 = 2,
HW90_BLOCK_RF = 3,
HW90_BLOCK_MAXIMUM = 4, // Never use this
}HW90_BLOCK_E, *PHW90_BLOCK_E;
typedef enum _RF_RADIO_PATH{
RF_PATH_A = 0, //Radio Path A
RF_PATH_B = 1, //Radio Path B
RF_PATH_C = 2, //Radio Path C
RF_PATH_D = 3, //Radio Path D
//RF_PATH_MAX //Max RF number 90 support
}RF_RADIO_PATH_E, *PRF_RADIO_PATH_E;
#define RF_PATH_MAX 2
#define CHANNEL_MAX_NUMBER 14 // 14 is the max channel number
#define CHANNEL_GROUP_MAX 3 // ch1~3, ch4~9, ch10~14 total three groups
typedef enum _WIRELESS_MODE {
WIRELESS_MODE_UNKNOWN = 0x00,
WIRELESS_MODE_A = BIT2,
WIRELESS_MODE_B = BIT0,
WIRELESS_MODE_G = BIT1,
WIRELESS_MODE_AUTO = BIT5,
WIRELESS_MODE_N_24G = BIT3,
WIRELESS_MODE_N_5G = BIT4,
WIRELESS_MODE_AC = BIT6
} WIRELESS_MODE;
typedef enum _BaseBand_Config_Type{
BaseBand_Config_PHY_REG = 0, //Radio Path A
BaseBand_Config_AGC_TAB = 1, //Radio Path B
}BaseBand_Config_Type, *PBaseBand_Config_Type;
typedef enum _PHY_Rate_Tx_Power_Offset_Area{
RA_OFFSET_LEGACY_OFDM1,
RA_OFFSET_LEGACY_OFDM2,
RA_OFFSET_HT_OFDM1,
RA_OFFSET_HT_OFDM2,
RA_OFFSET_HT_OFDM3,
RA_OFFSET_HT_OFDM4,
RA_OFFSET_HT_CCK,
}RA_OFFSET_AREA,*PRA_OFFSET_AREA;
/* BB/RF related */
typedef enum _RF_TYPE_8190P{
RF_TYPE_MIN, // 0
RF_8225=1, // 1 11b/g RF for verification only
RF_8256=2, // 2 11b/g/n
RF_8258=3, // 3 11a/b/g/n RF
RF_6052=4, // 4 11b/g/n RF
//RF_6052=5, // 4 11b/g/n RF
// TODO: We sholud remove this psudo PHY RF after we get new RF.
RF_PSEUDO_11N=5, // 5, It is a temporality RF.
}RF_TYPE_8190P_E,*PRF_TYPE_8190P_E;
typedef struct _BB_REGISTER_DEFINITION{
u32 rfintfs; // set software control:
// 0x870~0x877[8 bytes]
u32 rfintfi; // readback data:
// 0x8e0~0x8e7[8 bytes]
u32 rfintfo; // output data:
// 0x860~0x86f [16 bytes]
u32 rfintfe; // output enable:
// 0x860~0x86f [16 bytes]
u32 rf3wireOffset; // LSSI data:
// 0x840~0x84f [16 bytes]
u32 rfLSSI_Select; // BB Band Select:
// 0x878~0x87f [8 bytes]
u32 rfTxGainStage; // Tx gain stage:
// 0x80c~0x80f [4 bytes]
u32 rfHSSIPara1; // wire parameter control1 :
// 0x820~0x823,0x828~0x82b, 0x830~0x833, 0x838~0x83b [16 bytes]
u32 rfHSSIPara2; // wire parameter control2 :
// 0x824~0x827,0x82c~0x82f, 0x834~0x837, 0x83c~0x83f [16 bytes]
u32 rfSwitchControl; //Tx Rx antenna control :
// 0x858~0x85f [16 bytes]
u32 rfAGCControl1; //AGC parameter control1 :
// 0xc50~0xc53,0xc58~0xc5b, 0xc60~0xc63, 0xc68~0xc6b [16 bytes]
u32 rfAGCControl2; //AGC parameter control2 :
// 0xc54~0xc57,0xc5c~0xc5f, 0xc64~0xc67, 0xc6c~0xc6f [16 bytes]
u32 rfRxIQImbalance; //OFDM Rx IQ imbalance matrix :
// 0xc14~0xc17,0xc1c~0xc1f, 0xc24~0xc27, 0xc2c~0xc2f [16 bytes]
u32 rfRxAFE; //Rx IQ DC ofset and Rx digital filter, Rx DC notch filter :
// 0xc10~0xc13,0xc18~0xc1b, 0xc20~0xc23, 0xc28~0xc2b [16 bytes]
u32 rfTxIQImbalance; //OFDM Tx IQ imbalance matrix
// 0xc80~0xc83,0xc88~0xc8b, 0xc90~0xc93, 0xc98~0xc9b [16 bytes]
u32 rfTxAFE; //Tx IQ DC Offset and Tx DFIR type
// 0xc84~0xc87,0xc8c~0xc8f, 0xc94~0xc97, 0xc9c~0xc9f [16 bytes]
u32 rfLSSIReadBack; //LSSI RF readback data SI mode
// 0x8a0~0x8af [16 bytes]
u32 rfLSSIReadBackPi; //LSSI RF readback data PI mode 0x8b8-8bc for Path A and B
}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
typedef struct _R_ANTENNA_SELECT_OFDM{
u32 r_tx_antenna:4;
u32 r_ant_l:4;
u32 r_ant_non_ht:4;
u32 r_ant_ht1:4;
u32 r_ant_ht2:4;
u32 r_ant_ht_s1:4;
u32 r_ant_non_ht_s1:4;
u32 OFDM_TXSC:2;
u32 Reserved:2;
}R_ANTENNA_SELECT_OFDM;
typedef struct _R_ANTENNA_SELECT_CCK{
u8 r_cckrx_enable_2:2;
u8 r_cckrx_enable:2;
u8 r_ccktx_enable:4;
}R_ANTENNA_SELECT_CCK;
/*------------------------------Define structure----------------------------*/
/*------------------------Export global variable----------------------------*/
/*------------------------Export global variable----------------------------*/
/*------------------------Export Marco Definition---------------------------*/
/*------------------------Export Marco Definition---------------------------*/
/*--------------------------Exported Function prototype---------------------*/
//
// BB and RF register read/write
//
u32 rtl8192c_PHY_QueryBBReg( IN PADAPTER Adapter,
IN u32 RegAddr,
IN u32 BitMask );
void rtl8192c_PHY_SetBBReg( IN PADAPTER Adapter,
IN u32 RegAddr,
IN u32 BitMask,
IN u32 Data );
u32 rtl8192c_PHY_QueryRFReg( IN PADAPTER Adapter,
IN RF_RADIO_PATH_E eRFPath,
IN u32 RegAddr,
IN u32 BitMask );
void rtl8192c_PHY_SetRFReg( IN PADAPTER Adapter,
IN RF_RADIO_PATH_E eRFPath,
IN u32 RegAddr,
IN u32 BitMask,
IN u32 Data );
//
// Initialization related function
//
/* MAC/BB/RF HAL config */
int PHY_MACConfig8192C( IN PADAPTER Adapter );
int PHY_BBConfig8192C( IN PADAPTER Adapter );
int PHY_RFConfig8192C( IN PADAPTER Adapter );
/* RF config */
int rtl8192c_PHY_ConfigRFWithParaFile( IN PADAPTER Adapter,
IN u8* pFileName,
IN RF_RADIO_PATH_E eRFPath);
int rtl8192c_PHY_ConfigRFWithHeaderFile( IN PADAPTER Adapter,
IN RF_RADIO_PATH_E eRFPath);
/* BB/RF readback check for making sure init OK */
int rtl8192c_PHY_CheckBBAndRFOK( IN PADAPTER Adapter,
IN HW90_BLOCK_E CheckBlock,
IN RF_RADIO_PATH_E eRFPath );
/* Read initi reg value for tx power setting. */
void rtl8192c_PHY_GetHWRegOriginalValue( IN PADAPTER Adapter );
//
// RF Power setting
//
//extern BOOLEAN PHY_SetRFPowerState(IN PADAPTER Adapter,
// IN RT_RF_POWER_STATE eRFPowerState);
//
// BB TX Power R/W
//
void PHY_GetTxPowerLevel8192C( IN PADAPTER Adapter,
OUT u32* powerlevel );
void PHY_SetTxPowerLevel8192C( IN PADAPTER Adapter,
IN u8 channel );
BOOLEAN PHY_UpdateTxPowerDbm8192C( IN PADAPTER Adapter,
IN int powerInDbm );
//
VOID
PHY_ScanOperationBackup8192C(IN PADAPTER Adapter,
IN u8 Operation );
//
// Switch bandwidth for 8192S
//
//extern void PHY_SetBWModeCallback8192C( IN PRT_TIMER pTimer );
void PHY_SetBWMode8192C( IN PADAPTER pAdapter,
IN HT_CHANNEL_WIDTH ChnlWidth,
IN unsigned char Offset );
//
// Set FW CMD IO for 8192S.
//
//extern BOOLEAN HalSetIO8192C( IN PADAPTER Adapter,
// IN IO_TYPE IOType);
//
// Set A2 entry to fw for 8192S
//
extern void FillA2Entry8192C( IN PADAPTER Adapter,
IN u8 index,
IN u8* val);
//
// channel switch related funciton
//
//extern void PHY_SwChnlCallback8192C( IN PRT_TIMER pTimer );
void PHY_SwChnl8192C( IN PADAPTER pAdapter,
IN u8 channel );
// Call after initialization
void PHY_SwChnlPhy8192C( IN PADAPTER pAdapter,
IN u8 channel );
void ChkFwCmdIoDone( IN PADAPTER Adapter);
//
// BB/MAC/RF other monitor API
//
void PHY_SetMonitorMode8192C(IN PADAPTER pAdapter,
IN BOOLEAN bEnableMonitorMode );
BOOLEAN PHY_CheckIsLegalRfPath8192C(IN PADAPTER pAdapter,
IN u32 eRFPath );
VOID rtl8192c_PHY_SetRFPathSwitch(IN PADAPTER pAdapter, IN BOOLEAN bMain);
//
// Modify the value of the hw register when beacon interval be changed.
//
void
rtl8192c_PHY_SetBeaconHwReg( IN PADAPTER Adapter,
IN u16 BeaconInterval );
extern VOID
PHY_SwitchEphyParameter(
IN PADAPTER Adapter
);
extern VOID
PHY_EnableHostClkReq(
IN PADAPTER Adapter
);
BOOLEAN
SetAntennaConfig92C(
IN PADAPTER Adapter,
IN u8 DefaultAnt
);
#ifdef RTL8192C_RECONFIG_TO_1T1R
extern void PHY_Reconfig_To_1T1R(_adapter *padapter);
#endif
/*--------------------------Exported Function prototype---------------------*/
#define PHY_QueryBBReg(Adapter, RegAddr, BitMask) rtl8192c_PHY_QueryBBReg((Adapter), (RegAddr), (BitMask))
#define PHY_SetBBReg(Adapter, RegAddr, BitMask, Data) rtl8192c_PHY_SetBBReg((Adapter), (RegAddr), (BitMask), (Data))
#define PHY_QueryRFReg(Adapter, eRFPath, RegAddr, BitMask) rtl8192c_PHY_QueryRFReg((Adapter), (eRFPath), (RegAddr), (BitMask))
#define PHY_SetRFReg(Adapter, eRFPath, RegAddr, BitMask, Data) rtl8192c_PHY_SetRFReg((Adapter), (eRFPath), (RegAddr), (BitMask), (Data))
#define PHY_SetMacReg PHY_SetBBReg
#endif // __INC_HAL8192CPHYCFG_H