rtl8188eu/include/rtl8192c_dm.h
Larry Finger 065126d8ce rtl8188eu: Place driver rtl8188EUS_rtl8189ES_linux_v4.1.8_9499.20131104 in branch v4.1.8_9499
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2014-12-11 15:15:04 -06:00

263 lines
6.3 KiB
C
Executable file

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8192C_DM_H__
#define __RTL8192C_DM_H__
//============================================================
// Description:
//
// This file is for 92CE/92CU dynamic mechanism only
//
//
//============================================================
//============================================================
// function prototype
//============================================================
#define DYNAMIC_FUNC_BT BIT(0)
enum{
UP_LINK,
DOWN_LINK,
};
typedef enum _BT_Ant_NUM{
Ant_x2 = 0,
Ant_x1 = 1
} BT_Ant_NUM, *PBT_Ant_NUM;
typedef enum _BT_CoType{
BT_2Wire = 0,
BT_ISSC_3Wire = 1,
BT_Accel = 2,
BT_CSR_BC4 = 3,
BT_CSR_BC8 = 4,
BT_RTL8756 = 5,
} BT_CoType, *PBT_CoType;
typedef enum _BT_CurState{
BT_OFF = 0,
BT_ON = 1,
} BT_CurState, *PBT_CurState;
typedef enum _BT_ServiceType{
BT_SCO = 0,
BT_A2DP = 1,
BT_HID = 2,
BT_HID_Idle = 3,
BT_Scan = 4,
BT_Idle = 5,
BT_OtherAction = 6,
BT_Busy = 7,
BT_OtherBusy = 8,
BT_PAN = 9,
} BT_ServiceType, *PBT_ServiceType;
typedef enum _BT_RadioShared{
BT_Radio_Shared = 0,
BT_Radio_Individual = 1,
} BT_RadioShared, *PBT_RadioShared;
struct btcoexist_priv {
u8 BT_Coexist;
u8 BT_Ant_Num;
u8 BT_CoexistType;
u8 BT_State;
u8 BT_CUR_State; //0:on, 1:off
u8 BT_Ant_isolation; //0:good, 1:bad
u8 BT_PapeCtrl; //0:SW, 1:SW/HW dynamic
u8 BT_Service;
u8 BT_Ampdu; // 0:Disable BT control A-MPDU, 1:Enable BT control A-MPDU.
u8 BT_RadioSharedType;
u32 Ratio_Tx;
u32 Ratio_PRI;
u8 BtRfRegOrigin1E;
u8 BtRfRegOrigin1F;
u8 BtRssiState;
u32 BtEdcaUL;
u32 BtEdcaDL;
u32 BT_EDCA[2];
u8 bCOBT;
u8 bInitSet;
u8 bBTBusyTraffic;
u8 bBTTrafficModeSet;
u8 bBTNonTrafficModeSet;
//BTTraffic BT21TrafficStatistics;
u32 CurrentState;
u32 PreviousState;
u8 BtPreRssiState;
u8 bFWCoexistAllOff;
u8 bSWCoexistAllOff;
};
//============================================================
// structure and define
//============================================================
//###### duplicate code,will move to ODM #########
#define IQK_MAC_REG_NUM 4
#define IQK_ADDA_REG_NUM 16
#define IQK_BB_REG_NUM 9
#define HP_THERMAL_NUM 8
//###### duplicate code,will move to ODM #########
struct dm_priv
{
u8 DM_Type;
u8 DMFlag;
u8 InitDMFlag;
u32 InitODMFlag;
//* Upper and Lower Signal threshold for Rate Adaptive*/
int UndecoratedSmoothedPWDB;
int UndecoratedSmoothedCCK;
int EntryMinUndecoratedSmoothedPWDB;
int EntryMaxUndecoratedSmoothedPWDB;
int MinUndecoratedPWDBForDM;
int LastMinUndecoratedPWDBForDM;
//###### duplicate code,will move to ODM #########
/*
//for DIG
u8 bDMInitialGainEnable;
u8 binitialized; // for dm_initial_gain_Multi_STA use.
DIG_T DM_DigTable;
PS_T DM_PSTable;
FALSE_ALARM_STATISTICS FalseAlmCnt;
//for rate adaptive, in fact, 88c/92c fw will handle this
u8 bUseRAMask;
RATE_ADAPTIVE RateAdaptive;
*/
//for High Power
u8 bDynamicTxPowerEnable;
u8 LastDTPLvl;
u8 DynamicTxHighPowerLvl;//Add by Jacken Tx Power Control for Near/Far Range 2008/03/06
//for tx power tracking
u8 bTXPowerTracking;
u8 TXPowercount;
u8 bTXPowerTrackingInit;
u8 TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default
u8 TM_Trigger;
u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
u8 ThermalValue;
u8 ThermalValue_LCK;
u8 ThermalValue_IQK;
u8 ThermalValue_DPK;
u8 bRfPiEnable;
//for APK
u32 APKoutput[2][2]; //path A/B; output1_1a/output1_2a
u8 bAPKdone;
u8 bAPKThermalMeterIgnore;
u8 bDPdone;
u8 bDPPathAOK;
u8 bDPPathBOK;
//for IQK
u32 RegC04;
u32 Reg874;
u32 RegC08;
u32 RegB68;
u32 RegB6C;
u32 Reg870;
u32 Reg860;
u32 Reg864;
u32 ADDA_backup[IQK_ADDA_REG_NUM];
u32 IQK_MAC_backup[IQK_MAC_REG_NUM];
u32 IQK_BB_backup_recover[9];
u32 IQK_BB_backup[IQK_BB_REG_NUM];
u8 PowerIndex_backup[6];
u8 bCCKinCH14;
u8 CCK_index;
u8 OFDM_index[2];
u8 bDoneTxpower;
u8 CCK_index_HP;
u8 OFDM_index_HP[2];
u8 ThermalValue_HP[HP_THERMAL_NUM];
u8 ThermalValue_HP_index;
//for TxPwrTracking
s32 RegE94;
s32 RegE9C;
s32 RegEB4;
s32 RegEBC;
u32 TXPowerTrackingCallbackCnt; //cosa add for debug
u32 prv_traffic_idx; // edca turbo
/*
// for dm_RF_Saving
u8 initialize;
u32 rf_saving_Reg874;
u32 rf_saving_RegC70;
u32 rf_saving_Reg85C;
u32 rf_saving_RegA74;
*/
//for Antenna diversity
#ifdef CONFIG_ANTENNA_DIVERSITY
// SWAT_T DM_SWAT_Table;
#endif
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
// _timer SwAntennaSwitchTimer;
/*
u64 lastTxOkCnt;
u64 lastRxOkCnt;
u64 TXByteCnt_A;
u64 TXByteCnt_B;
u64 RXByteCnt_A;
u64 RXByteCnt_B;
u8 DoubleComfirm;
u8 TrafficLoad;
*/
#endif
s32 OFDM_Pkt_Cnt;
u8 RSSI_Select;
// u8 DIG_Dynamic_MIN ;
//###### duplicate code,will move to ODM #########
// Add for Reading Initial Data Rate SEL Register 0x484 during watchdog. Using for fill tx desc. 2011.3.21 by Thomas
u8 INIDATA_RATE[32];
};
//============================================================
// function prototype
//============================================================
#ifdef CONFIG_BT_COEXIST
void rtl8192c_set_dm_bt_coexist(_adapter *padapter, u8 bStart);
void rtl8192c_issue_delete_ba(_adapter *padapter, u8 dir);
#endif
void rtl8192c_init_dm_priv(IN PADAPTER Adapter);
void rtl8192c_deinit_dm_priv(IN PADAPTER Adapter);
void rtl8192c_InitHalDm( IN PADAPTER Adapter);
void rtl8192c_HalDmWatchDog(IN PADAPTER Adapter);
#endif //__HAL8190PCIDM_H__