rtl8188eu/include/rtl8723a_hal.h
Larry Finger 065126d8ce rtl8188eu: Place driver rtl8188EUS_rtl8189ES_linux_v4.1.8_9499.20131104 in branch v4.1.8_9499
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2014-12-11 15:15:04 -06:00

849 lines
25 KiB
C
Executable file

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTL8723A_HAL_H__
#define __RTL8723A_HAL_H__
#include "rtl8723a_spec.h"
#include "rtl8723a_pg.h"
#include "Hal8723APhyReg.h"
#include "Hal8723APhyCfg.h"
#include "rtl8723a_rf.h"
#ifdef CONFIG_BT_COEXIST
#include "rtl8723a_bt-coexist.h"
#endif
#include "rtl8723a_dm.h"
#include "rtl8723a_recv.h"
#include "rtl8723a_xmit.h"
#include "rtl8723a_cmd.h"
#ifdef DBG_CONFIG_ERROR_DETECT
#include "rtl8723a_sreset.h"
#endif
#include "rtw_efuse.h"
#include "../hal/OUTSRC/odm_precomp.h"
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
//2TODO: We should define 8192S firmware related macro settings here!!
#define RTL819X_DEFAULT_RF_TYPE RF_1T2R
#define RTL819X_TOTAL_RF_PATH 2
//---------------------------------------------------------------------
// RTL8723S From file
//---------------------------------------------------------------------
#define RTL8723_FW_UMC_IMG "rtl8723S\\rtl8723fw.bin"
#define RTL8723_FW_UMC_B_IMG "rtl8723S\\rtl8723fw_B.bin"
#define RTL8723_PHY_REG "rtl8723S\\PHY_REG_1T.txt"
#define RTL8723_PHY_RADIO_A "rtl8723S\\radio_a_1T.txt"
#define RTL8723_PHY_RADIO_B "rtl8723S\\radio_b_1T.txt"
#define RTL8723_AGC_TAB "rtl8723S\\AGC_TAB_1T.txt"
#define RTL8723_PHY_MACREG "rtl8723S\\MAC_REG.txt"
#define RTL8723_PHY_REG_PG "rtl8723S\\PHY_REG_PG.txt"
#define RTL8723_PHY_REG_MP "rtl8723S\\PHY_REG_MP.txt"
//---------------------------------------------------------------------
// RTL8723S From header
//---------------------------------------------------------------------
// Fw Array
#define Rtl8723_FwImageArray Rtl8723SFwImgArray
#define Rtl8723_FwUMCBCutImageArrayWithBT Rtl8723SFwUMCBCutImgArrayWithBT
#define Rtl8723_FwUMCBCutImageArrayWithoutBT Rtl8723SFwUMCBCutImgArrayWithoutBT
#define Rtl8723_ImgArrayLength Rtl8723SImgArrayLength
#define Rtl8723_UMCBCutImgArrayWithBTLength Rtl8723SUMCBCutImgArrayWithBTLength
#define Rtl8723_UMCBCutImgArrayWithoutBTLength Rtl8723SUMCBCutImgArrayWithoutBTLength
#define Rtl8723_PHY_REG_Array_PG Rtl8723SPHY_REG_Array_PG
#define Rtl8723_PHY_REG_Array_PGLength Rtl8723SPHY_REG_Array_PGLength
#if MP_DRIVER == 1
#define Rtl8723E_FwBTImgArray Rtl8723EFwBTImgArray
#define Rtl8723E_FwBTImgArrayLength Rtl8723EBTImgArrayLength
#define Rtl8723_FwUMCBCutMPImageArray Rtl8723SFwUMCBCutMPImgArray
#define Rtl8723_UMCBCutMPImgArrayLength Rtl8723SUMCBCutMPImgArrayLength
#define Rtl8723_PHY_REG_Array_MP Rtl8723SPHY_REG_Array_MP
#define Rtl8723_PHY_REG_Array_MPLength Rtl8723SPHY_REG_Array_MPLength
#endif
#ifndef CONFIG_PHY_SETTING_WITH_ODM
// MAC/BB/PHY Array
#define Rtl8723_MAC_Array Rtl8723SMAC_2T_Array
//#define Rtl8723_AGCTAB_2TArray Rtl8723SAGCTAB_2TArray
#define Rtl8723_AGCTAB_1TArray Rtl8723SAGCTAB_1TArray
//#define Rtl8723_PHY_REG_2TArray Rtl8723SPHY_REG_2TArray
#define Rtl8723_PHY_REG_1TArray Rtl8723SPHY_REG_1TArray
//#define Rtl8723_RadioA_2TArray Rtl8723SRadioA_2TArray
#define Rtl8723_RadioA_1TArray Rtl8723SRadioA_1TArray
//#define Rtl8723_RadioB_2TArray Rtl8723SRadioB_2TArray
#define Rtl8723_RadioB_1TArray Rtl8723SRadioB_1TArray
// Array length
#define Rtl8723_MAC_ArrayLength Rtl8723SMAC_2T_ArrayLength
#define Rtl8723_AGCTAB_1TArrayLength Rtl8723SAGCTAB_1TArrayLength
#define Rtl8723_PHY_REG_1TArrayLength Rtl8723SPHY_REG_1TArrayLength
#define Rtl8723_RadioA_1TArrayLength Rtl8723SRadioA_1TArrayLength
#define Rtl8723_RadioB_1TArrayLength Rtl8723SRadioB_1TArrayLength
#endif // CONFIG_PHY_SETTING_WITH_ODM
#endif // CONFIG_SDIO_HCI
#ifdef CONFIG_USB_HCI
//2TODO: We should define 8192S firmware related macro settings here!!
#define RTL819X_DEFAULT_RF_TYPE RF_1T2R
#define RTL819X_TOTAL_RF_PATH 2
//TODO: The following need to check!!
#define RTL8723_FW_UMC_IMG "rtl8192CU\\rtl8723fw.bin"
#define RTL8723_FW_UMC_B_IMG "rtl8192CU\\rtl8723fw_B.bin"
#define RTL8723_PHY_REG "rtl8723S\\PHY_REG_1T.txt"
#define RTL8723_PHY_RADIO_A "rtl8723S\\radio_a_1T.txt"
#define RTL8723_PHY_RADIO_B "rtl8723S\\radio_b_1T.txt"
#define RTL8723_AGC_TAB "rtl8723S\\AGC_TAB_1T.txt"
#define RTL8723_PHY_MACREG "rtl8723S\\MAC_REG.txt"
#define RTL8723_PHY_REG_PG "rtl8723S\\PHY_REG_PG.txt"
#define RTL8723_PHY_REG_MP "rtl8723S\\PHY_REG_MP.txt"
//---------------------------------------------------------------------
// RTL8723S From header
//---------------------------------------------------------------------
// Fw Array
#define Rtl8723_FwImageArray Rtl8723UFwImgArray
#define Rtl8723_FwUMCBCutImageArrayWithBT Rtl8723UFwUMCBCutImgArrayWithBT
#define Rtl8723_FwUMCBCutImageArrayWithoutBT Rtl8723UFwUMCBCutImgArrayWithoutBT
#define Rtl8723_ImgArrayLength Rtl8723UImgArrayLength
#define Rtl8723_UMCBCutImgArrayWithBTLength Rtl8723UUMCBCutImgArrayWithBTLength
#define Rtl8723_UMCBCutImgArrayWithoutBTLength Rtl8723UUMCBCutImgArrayWithoutBTLength
#define Rtl8723_PHY_REG_Array_PG Rtl8723UPHY_REG_Array_PG
#define Rtl8723_PHY_REG_Array_PGLength Rtl8723UPHY_REG_Array_PGLength
#if MP_DRIVER == 1
#define Rtl8723E_FwBTImgArray Rtl8723EFwBTImgArray
#define Rtl8723E_FwBTImgArrayLength Rtl8723EBTImgArrayLength
#define Rtl8723_FwUMCBCutMPImageArray Rtl8723SFwUMCBCutMPImgArray
#define Rtl8723_UMCBCutMPImgArrayLength Rtl8723SUMCBCutMPImgArrayLength
#define Rtl8723_PHY_REG_Array_MP Rtl8723UPHY_REG_Array_MP
#define Rtl8723_PHY_REG_Array_MPLength Rtl8723UPHY_REG_Array_MPLength
#endif
#ifndef CONFIG_PHY_SETTING_WITH_ODM
// MAC/BB/PHY Array
#define Rtl8723_MAC_Array Rtl8723UMAC_2T_Array
//#define Rtl8723_AGCTAB_2TArray Rtl8723UAGCTAB_2TArray
#define Rtl8723_AGCTAB_1TArray Rtl8723UAGCTAB_1TArray
//#define Rtl8723_PHY_REG_2TArray Rtl8723UPHY_REG_2TArray
#define Rtl8723_PHY_REG_1TArray Rtl8723UPHY_REG_1TArray
//#define Rtl8723_RadioA_2TArray Rtl8723URadioA_2TArray
#define Rtl8723_RadioA_1TArray Rtl8723URadioA_1TArray
//#define Rtl8723_RadioB_2TArray Rtl8723URadioB_2TArray
#define Rtl8723_RadioB_1TArray Rtl8723URadioB_1TArray
// Array length
#define Rtl8723_MAC_ArrayLength Rtl8723UMAC_2T_ArrayLength
#define Rtl8723_AGCTAB_1TArrayLength Rtl8723UAGCTAB_1TArrayLength
#define Rtl8723_PHY_REG_1TArrayLength Rtl8723UPHY_REG_1TArrayLength
#define Rtl8723_RadioA_1TArrayLength Rtl8723URadioA_1TArrayLength
#define Rtl8723_RadioB_1TArrayLength Rtl8723URadioB_1TArrayLength
#endif
#endif
#define DRVINFO_SZ 4 // unit is 8bytes
#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
#define FW_8723A_SIZE 0x8000
#define FW_8723A_START_ADDRESS 0x1000
#define FW_8723A_END_ADDRESS 0x1FFF //0x5FFF
#define MAX_PAGE_SIZE 4096 // @ page : 4k bytes
#define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
(le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300)
typedef enum _FIRMWARE_SOURCE {
FW_SOURCE_IMG_FILE = 0,
FW_SOURCE_HEADER_FILE = 1, //from header file
} FIRMWARE_SOURCE, *PFIRMWARE_SOURCE;
typedef struct _RT_FIRMWARE {
FIRMWARE_SOURCE eFWSource;
#ifdef CONFIG_EMBEDDED_FWIMG
u8* szFwBuffer;
#else
u8 szFwBuffer[FW_8723A_SIZE];
#endif
u32 ulFwLength;
#ifdef CONFIG_EMBEDDED_FWIMG
u8* szBTFwBuffer;
#else
u8 szBTFwBuffer[FW_8723A_SIZE];
#endif
u32 ulBTFwLength;
} RT_FIRMWARE, *PRT_FIRMWARE, RT_FIRMWARE_8723A, *PRT_FIRMWARE_8723A;
//
// This structure must be cared byte-ordering
//
// Added by tynli. 2009.12.04.
typedef struct _RT_8723A_FIRMWARE_HDR
{
// 8-byte alinment required
//--- LONG WORD 0 ----
u16 Signature; // 92C0: test chip; 92C, 88C0: test chip; 88C1: MP A-cut; 92C1: MP A-cut
u8 Category; // AP/NIC and USB/PCI
u8 Function; // Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions
u16 Version; // FW Version
u8 Subversion; // FW Subversion, default 0x00
u16 Rsvd1;
//--- LONG WORD 1 ----
u8 Month; // Release time Month field
u8 Date; // Release time Date field
u8 Hour; // Release time Hour field
u8 Minute; // Release time Minute field
u16 RamCodeSize; // The size of RAM code
u16 Rsvd2;
//--- LONG WORD 2 ----
u32 SvnIdx; // The SVN entry index
u32 Rsvd3;
//--- LONG WORD 3 ----
u32 Rsvd4;
u32 Rsvd5;
}RT_8723A_FIRMWARE_HDR, *PRT_8723A_FIRMWARE_HDR;
#define DRIVER_EARLY_INT_TIME 0x05
#define BCN_DMA_ATIME_INT_TIME 0x02
#ifdef CONFIG_USB_RX_AGGREGATION
typedef enum _USB_RX_AGG_MODE{
USB_RX_AGG_DISABLE,
USB_RX_AGG_DMA,
USB_RX_AGG_USB,
USB_RX_AGG_MIX
}USB_RX_AGG_MODE;
#define MAX_RX_DMA_BUFFER_SIZE 10240 // 10K for 8192C RX DMA buffer
#endif
// BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON.
#define MAX_TX_QUEUE 9
#define TX_SELE_HQ BIT(0) // High Queue
#define TX_SELE_LQ BIT(1) // Low Queue
#define TX_SELE_NQ BIT(2) // Normal Queue
// Note: We will divide number of page equally for each queue other than public queue!
#define TX_TOTAL_PAGE_NUMBER 0xF8
#define TX_PAGE_BOUNDARY (TX_TOTAL_PAGE_NUMBER + 1)
// For Normal Chip Setting
// (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
#define NORMAL_PAGE_NUM_PUBQ 0xE7
#define NORMAL_PAGE_NUM_HPQ 0x0C
#define NORMAL_PAGE_NUM_LPQ 0x02
#define NORMAL_PAGE_NUM_NPQ 0x02
// For Test Chip Setting
// (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER
#define TEST_PAGE_NUM_PUBQ 0x7E
// For Test Chip Setting
#define WMM_TEST_TX_TOTAL_PAGE_NUMBER 0xF5
#define WMM_TEST_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
#define WMM_TEST_PAGE_NUM_PUBQ 0xA3
#define WMM_TEST_PAGE_NUM_HPQ 0x29
#define WMM_TEST_PAGE_NUM_LPQ 0x29
// Note: For Normal Chip Setting, modify later
#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER 0xF5
#define WMM_NORMAL_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) //F6
#define WMM_NORMAL_PAGE_NUM_PUBQ 0xB0
#define WMM_NORMAL_PAGE_NUM_HPQ 0x29
#define WMM_NORMAL_PAGE_NUM_LPQ 0x1C
#define WMM_NORMAL_PAGE_NUM_NPQ 0x1C
//-------------------------------------------------------------------------
// Chip specific
//-------------------------------------------------------------------------
#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
#define CHIP_BONDING_92C_1T2R 0x1
#define CHIP_BONDING_88C_USB_MCARD 0x2
#define CHIP_BONDING_88C_USB_HP 0x1
#include "HalVerDef.h"
#include "hal_com.h"
//-------------------------------------------------------------------------
// Channel Plan
//-------------------------------------------------------------------------
enum ChannelPlan
{
CHPL_FCC = 0,
CHPL_IC = 1,
CHPL_ETSI = 2,
CHPL_SPAIN = 3,
CHPL_FRANCE = 4,
CHPL_MKK = 5,
CHPL_MKK1 = 6,
CHPL_ISRAEL = 7,
CHPL_TELEC = 8,
CHPL_GLOBAL = 9,
CHPL_WORLD = 10,
};
#define HAL_EFUSE_MEMORY
#define EFUSE_REAL_CONTENT_LEN 512
#define EFUSE_MAP_LEN 128
#define EFUSE_MAX_SECTION 16
#define EFUSE_IC_ID_OFFSET 506 //For some inferiority IC purpose. added by Roger, 2009.09.02.
#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
//
// <Roger_Notes>
// To prevent out of boundary programming case,
// leave 1byte and program full section
// 9bytes + 1byt + 5bytes and pre 1byte.
// For worst case:
// | 1byte|----8bytes----|1byte|--5bytes--|
// | | Reserved(14bytes) |
//
// PG data exclude header, dummy 6 bytes frome CP test and reserved 1byte.
#define EFUSE_OOB_PROTECT_BYTES 15
#define EFUSE_REAL_CONTENT_LEN_8723A 512
#define EFUSE_MAP_LEN_8723A 256
#define EFUSE_MAX_SECTION_8723A 32
//========================================================
// EFUSE for BT definition
//========================================================
#define EFUSE_BT_REAL_BANK_CONTENT_LEN 512
#define EFUSE_BT_REAL_CONTENT_LEN 1536 // 512*3
#define EFUSE_BT_MAP_LEN 1024 // 1k bytes
#define EFUSE_BT_MAX_SECTION 128 // 1024/8
#define EFUSE_PROTECT_BYTES_BANK 16
//
// <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06.
//
typedef enum _RT_MULTI_FUNC {
RT_MULTI_FUNC_NONE = 0x00,
RT_MULTI_FUNC_WIFI = 0x01,
RT_MULTI_FUNC_BT = 0x02,
RT_MULTI_FUNC_GPS = 0x04,
} RT_MULTI_FUNC, *PRT_MULTI_FUNC;
//
// <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08.
//
typedef enum _RT_POLARITY_CTL {
RT_POLARITY_LOW_ACT = 0,
RT_POLARITY_HIGH_ACT = 1,
} RT_POLARITY_CTL, *PRT_POLARITY_CTL;
// For RTL8723 regulator mode. by tynli. 2011.01.14.
typedef enum _RT_REGULATOR_MODE {
RT_SWITCHING_REGULATOR = 0,
RT_LDO_REGULATOR = 1,
} RT_REGULATOR_MODE, *PRT_REGULATOR_MODE;
// Description: Determine the types of C2H events that are the same in driver and Fw.
// Fisrt constructed by tynli. 2009.10.09.
typedef enum _RTL8192C_C2H_EVT
{
C2H_DBG = 0,
C2H_TSF = 1,
C2H_AP_RPT_RSP = 2,
C2H_CCX_TX_RPT = 3, // The FW notify the report of the specific tx packet.
C2H_BT_RSSI = 4,
C2H_BT_OP_MODE = 5,
C2H_EXT_RA_RPT = 6,
C2H_HW_INFO_EXCH = 10,
C2H_C2H_H2C_TEST = 11,
C2H_BT_INFO = 12,
C2H_BT_MP_INFO = 15,
MAX_C2HEVENT
} RTL8192C_C2H_EVT;
typedef struct hal_data_8723a
{
HAL_VERSION VersionID;
RT_CUSTOMER_ID CustomerID;
u16 FirmwareVersion;
u16 FirmwareVersionRev;
u16 FirmwareSubVersion;
u16 FirmwareSignature;
//current WIFI_PHY values
u32 ReceiveConfig;
WIRELESS_MODE CurrentWirelessMode;
HT_CHANNEL_WIDTH CurrentChannelBW;
u8 CurrentChannel;
u8 nCur40MhzPrimeSC;// Control channel sub-carrier
u16 BasicRateSet;
//rf_ctrl
u8 rf_chip;
u8 rf_type;
u8 NumTotalRFPath;
u8 BoardType;
u8 CrystalCap;
//
// EEPROM setting.
//
u8 EEPROMVersion;
u16 EEPROMVID;
u16 EEPROMPID;
u16 EEPROMSVID;
u16 EEPROMSDID;
u8 EEPROMCustomerID;
u8 EEPROMSubCustomerID;
u8 EEPROMRegulatory;
u8 EEPROMThermalMeter;
u8 EEPROMBluetoothCoexist;
u8 EEPROMBluetoothType;
u8 EEPROMBluetoothAntNum;
u8 EEPROMBluetoothAntIsolation;
u8 EEPROMBluetoothRadioShared;
u8 bTXPowerDataReadFromEEPORM;
u8 bAPKThermalMeterIgnore;
u8 bIQKInitialized;
u8 bAntennaDetected;
u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; // For HT 40MHZ pwr
u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// HT 20<->40 Pwr diff
u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];// For HT<->legacy pwr diff
// For power group
u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
u8 LegacyHTTxPowerDiff;// Legacy to HT rate power diff
// Read/write are allow for following hardware information variables
u8 framesync;
u32 framesyncC34;
u8 framesyncMonitor;
u8 DefaultInitialGain[4];
u8 pwrGroupCnt;
u32 MCSTxPowerLevelOriginalOffset[7][16];
u32 CCKTxPowerLevelOriginalOffset;
u32 AntennaTxPath; // Antenna path Tx
u32 AntennaRxPath; // Antenna path Rx
u8 ExternalPA;
u8 bLedOpenDrain; // Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16.
//u32 LedControlNum;
//u32 LedControlMode;
//u32 TxPowerTrackControl;
u8 b1x1RecvCombine; // for 1T1R receive combining
// For EDCA Turbo mode
// u8 bIsAnyNonBEPkts; // Adapter->recvpriv.bIsAnyNonBEPkts
// u8 bCurrentTurboEDCA;
// u8 bForcedDisableTurboEDCA;
// u8 bIsCurRDLState; // pdmpriv->prv_traffic_idx
u32 AcParam_BE; //Original parameter for BE, use for EDCA turbo.
//vivi, for tx power tracking, 20080407
//u16 TSSI_13dBm;
//u32 Pwr_Track;
// The current Tx Power Level
u8 CurrentCckTxPwrIdx;
u8 CurrentOfdm24GTxPwrIdx;
BB_REGISTER_DEFINITION_T PHYRegDef[4]; //Radio A/B/C/D
BOOLEAN bRFPathRxEnable[4]; // We support 4 RF path now.
u32 RfRegChnlVal[2];
u8 bCckHighPower;
//RDG enable
BOOLEAN bRDGEnable;
//for host message to fw
u8 LastHMEBoxNum;
u8 fw_ractrl;
u8 RegTxPause;
// Beacon function related global variable.
u32 RegBcnCtrlVal;
u8 RegFwHwTxQCtrl;
u8 RegReg542;
struct dm_priv dmpriv;
DM_ODM_T odmpriv;
//_lock odm_stainfo_lock;
#ifdef DBG_CONFIG_ERROR_DETECT
struct sreset_priv srestpriv;
#endif
#ifdef CONFIG_BT_COEXIST
u8 bBTMode;
// BT only.
BT30Info BtInfo;
// For bluetooth co-existance
BT_COEXIST_STR bt_coexist;
#endif
#ifdef CONFIG_ANTENNA_DIVERSITY
u8 CurAntenna;
// SW Antenna Switch
s32 RSSI_sum_A;
s32 RSSI_sum_B;
s32 RSSI_cnt_A;
s32 RSSI_cnt_B;
u8 RSSI_test;
u8 AntDivCfg;
#endif
u8 bDumpRxPkt;//for debug
u8 FwRsvdPageStartOffset; //2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ.
// 2010/08/09 MH Add CU power down mode.
u8 pwrdown;
// Add for dual MAC 0--Mac0 1--Mac1
u32 interfaceIndex;
u8 OutEpQueueSel;
u8 OutEpNumber;
// 2010/12/10 MH Add for USB aggreation mode dynamic shceme.
BOOLEAN UsbRxHighSpeedMode;
// 2010/11/22 MH Add for slim combo debug mode selective.
// This is used for fix the drawback of CU TSMC-A/UMC-A cut. HW auto suspend ability. Close BT clock.
BOOLEAN SlimComboDbg;
//
// Add For EEPROM Efuse switch and Efuse Shadow map Setting
//
u8 EepromOrEfuse;
// u8 EfuseMap[2][HWSET_MAX_SIZE_512]; //92C:256bytes, 88E:512bytes, we use union set (512bytes)
u16 EfuseUsedBytes;
u8 EfuseUsedPercentage;
#ifdef HAL_EFUSE_MEMORY
EFUSE_HAL EfuseHal;
#endif
// Interrupt relatd register information.
u32 SysIntrStatus;
u32 SysIntrMask;
//
// 2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an
// independent file in the future.
//
//------------------------8723-----------------------------------------//
RT_MULTI_FUNC MultiFunc; // For multi-function consideration.
RT_POLARITY_CTL PolarityCtl; // For Wifi PDn Polarity control.
RT_REGULATOR_MODE RegulatorMode; // switching regulator or LDO
//------------------------8723-----------------------------------------//
//
// 2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an
// independent file in the future.
BOOLEAN bMACFuncEnable;
#ifdef CONFIG_P2P
struct P2P_PS_Offload_t p2p_ps_offload;
#endif
//
// For USB Interface HAL related
//
#ifdef CONFIG_USB_HCI
u32 UsbBulkOutSize;
// Interrupt relatd register information.
u32 IntArray[2];
u32 IntrMask[2];
#endif
//
// For SDIO Interface HAL related
//
// Auto FSM to Turn On, include clock, isolation, power control for MAC only
u8 bMacPwrCtrlOn;
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
//
// SDIO ISR Related
//
// u32 IntrMask[1];
// u32 IntrMaskToSet[1];
// LOG_INTERRUPT InterruptLog;
u32 sdio_himr;
u32 sdio_hisr;
//
// SDIO Tx FIFO related.
//
// HIQ, MID, LOW, PUB free pages; padapter->xmitpriv.free_txpg
u8 SdioTxFIFOFreePage[SDIO_TX_FREE_PG_QUEUE];
_lock SdioTxFIFOFreePageLock;
//
// SDIO Rx FIFO related.
//
u8 SdioRxFIFOCnt;
u16 SdioRxFIFOSize;
#endif
} HAL_DATA_8723A, *PHAL_DATA_8723A;
#if 0
#define HAL_DATA_TYPE HAL_DATA_8723A
#define PHAL_DATA_TYPE PHAL_DATA_8723A
#else
typedef struct hal_data_8723a HAL_DATA_TYPE, *PHAL_DATA_TYPE;
#endif
#define GET_HAL_DATA(__pAdapter) ((HAL_DATA_TYPE *)((__pAdapter)->HalData))
#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
typedef struct rxreport_8723a
{
u32 pktlen:14;
u32 crc32:1;
u32 icverr:1;
u32 drvinfosize:4;
u32 security:3;
u32 qos:1;
u32 shift:2;
u32 physt:1;
u32 swdec:1;
u32 ls:1;
u32 fs:1;
u32 eor:1;
u32 own:1;
u32 macid:5;
u32 tid:4;
u32 hwrsvd:4;
u32 amsdu:1;
u32 paggr:1;
u32 faggr:1;
u32 a1fit:4;
u32 a2fit:4;
u32 pam:1;
u32 pwr:1;
u32 md:1;
u32 mf:1;
u32 type:2;
u32 mc:1;
u32 bc:1;
u32 seq:12;
u32 frag:4;
u32 nextpktlen:14;
u32 nextind:1;
u32 rsvd0831:1;
u32 rxmcs:6;
u32 rxht:1;
u32 gf:1;
u32 splcp:1;
u32 bw:1;
u32 htc:1;
u32 eosp:1;
u32 bssidfit:2;
u32 rsvd1214:16;
u32 unicastwake:1;
u32 magicwake:1;
u32 pattern0match:1;
u32 pattern1match:1;
u32 pattern2match:1;
u32 pattern3match:1;
u32 pattern4match:1;
u32 pattern5match:1;
u32 pattern6match:1;
u32 pattern7match:1;
u32 pattern8match:1;
u32 pattern9match:1;
u32 patternamatch:1;
u32 patternbmatch:1;
u32 patterncmatch:1;
u32 rsvd1613:19;
u32 tsfl;
u32 bassn:12;
u32 bavld:1;
u32 rsvd2413:19;
} RXREPORT, *PRXREPORT;
typedef struct phystatus_8723a
{
u32 rxgain_a:7;
u32 trsw_a:1;
u32 rxgain_b:7;
u32 trsw_b:1;
u32 chcorr_l:16;
u32 sigqualcck:8;
u32 cfo_a:8;
u32 cfo_b:8;
u32 chcorr_h:8;
u32 noisepwrdb_h:8;
u32 cfo_tail_a:8;
u32 cfo_tail_b:8;
u32 rsvd0824:8;
u32 rsvd1200:8;
u32 rxevm_a:8;
u32 rxevm_b:8;
u32 rxsnr_a:8;
u32 rxsnr_b:8;
u32 noisepwrdb_l:8;
u32 rsvd1616:8;
u32 postsnr_a:8;
u32 postsnr_b:8;
u32 csi_a:8;
u32 csi_b:8;
u32 targetcsi_a:8;
u32 targetcsi_b:8;
u32 sigevm:8;
u32 maxexpwr:8;
u32 exintflag:1;
u32 sgien:1;
u32 rxsc:2;
u32 idlelong:1;
u32 anttrainen:1;
u32 antselb:1;
u32 antsel:1;
} PHYSTATUS, *PPHYSTATUS;
// rtl8723a_hal_init.c
int FirmwareDownloadBT(IN PADAPTER Adapter, PRT_FIRMWARE_8723A pFirmware);
s32 rtl8723a_FirmwareDownload(PADAPTER padapter);
void rtl8723a_FirmwareSelfReset(PADAPTER padapter);
void rtl8723a_InitializeFirmwareVars(PADAPTER padapter);
void _8051Reset8723A(PADAPTER padapter);
void rtl8723a_InitAntenna_Selection(PADAPTER padapter);
void rtl8723a_DeinitAntenna_Selection(PADAPTER padapter);
void rtl8723a_CheckAntenna_Selection(PADAPTER padapter);
void rtl8723a_init_default_value(PADAPTER padapter);
s32 InitLLTTable(PADAPTER padapter, u32 boundary);
s32 CardDisableHWSM(PADAPTER padapter, u8 resetMCU);
s32 CardDisableWithoutHWSM(PADAPTER padapter);
// EFuse
u8 GetEEPROMSize8723A(PADAPTER padapter);
void Hal_InitPGData(PADAPTER padapter, u8 *PROMContent);
void Hal_EfuseParseIDCode(PADAPTER padapter, u8 *hwinfo);
void Hal_EfuseParseTxPowerInfo_8723A(PADAPTER padapter, u8 *PROMContent, BOOLEAN AutoLoadFail);
void Hal_EfuseParseBTCoexistInfo_8723A(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseEEPROMVer(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void rtl8723a_EfuseParseChnlPlan(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseCustomerID(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseAntennaDiversity(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseRateIndicationOption(PADAPTER padapter, u8 *hwinfo, BOOLEAN AutoLoadFail);
void Hal_EfuseParseXtal_8723A(PADAPTER pAdapter, u8 *hwinfo, u8 AutoLoadFail);
void Hal_EfuseParseThermalMeter_8723A(PADAPTER padapter, u8 *hwinfo, u8 AutoLoadFail);
//RT_CHANNEL_DOMAIN rtl8723a_HalMapChannelPlan(PADAPTER padapter, u8 HalChannelPlan);
//VERSION_8192C rtl8723a_ReadChipVersion(PADAPTER padapter);
//void rtl8723a_ReadBluetoothCoexistInfo(PADAPTER padapter, u8 *PROMContent, BOOLEAN AutoloadFail);
void Hal_InitChannelPlan(PADAPTER padapter);
void rtl8723a_set_hal_ops(struct hal_ops *pHalFunc);
void SetHwReg8723A(PADAPTER padapter, u8 variable, u8 *val);
void GetHwReg8723A(PADAPTER padapter, u8 variable, u8 *val);
#ifdef CONFIG_BT_COEXIST
void rtl8723a_SingleDualAntennaDetection(PADAPTER padapter);
#endif
// register
void SetBcnCtrlReg(PADAPTER padapter, u8 SetBits, u8 ClearBits);
void rtl8723a_InitBeaconParameters(PADAPTER padapter);
void rtl8723a_InitBeaconMaxError(PADAPTER padapter, u8 InfraMode);
void rtl8723a_start_thread(_adapter *padapter);
void rtl8723a_stop_thread(_adapter *padapter);
s32 c2h_id_filter_ccx_8723a(u8 id);
#if defined(CONFIG_CHECK_BT_HANG) && defined(CONFIG_BT_COEXIST)
void rtl8723a_init_checkbthang_workqueue(_adapter * padapter);
void rtl8723a_free_checkbthang_workqueue(_adapter * padapter);
void rtl8723a_cancel_checkbthang_workqueue(_adapter * padapter);
void rtl8723a_hal_check_bt_hang(_adapter * padapter);
#endif
#ifdef CONFIG_RF_GAIN_OFFSET
void Hal_ReadRFGainOffset(PADAPTER pAdapter,u8* hwinfo,BOOLEAN AutoLoadFail);
#endif //CONFIG_RF_GAIN_OFFSET
#endif