rtl8188eu/hal/HalPwrSeqCmd.c
Larry Finger fe06a8b006 rtl8188eu: Convert C90 comments to kernel form for hal/*.c
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-07-10 13:25:07 -05:00

185 lines
5.7 KiB
C

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*++
Copyright (c) Realtek Semiconductor Corp. All rights reserved.
Module Name:
HalPwrSeqCmd.c
Abstract:
Implement HW Power sequence configuration CMD handling routine for Realtek devices.
Major Change History:
When Who What
---------- --------------- -------------------------------
2011-10-26 Lucas Modify to be compatible with SD4-CE driver.
2011-07-07 Roger Create.
--*/
#include <HalPwrSeqCmd.h>
#ifdef CONFIG_SDIO_HCI
#include <sdio_ops.h>
#elif defined(CONFIG_GSPI_HCI)
#include <gspi_ops.h>
#endif
/* */
/* Description: */
/* This routine deal with the Power Configuration CMDs parsing for RTL8723/RTL8188E Series IC. */
/* */
/* Assumption: */
/* We should follow specific format which was released from HW SD. */
/* */
/* 2011.07.07, added by Roger. */
/* */
u8 HalPwrSeqCmdParsing(
PADAPTER padapter,
u8 CutVersion,
u8 FabVersion,
u8 InterfaceType,
WLAN_PWR_CFG PwrSeqCmd[])
{
WLAN_PWR_CFG PwrCfgCmd = {0};
u8 bPollingBit = false;
u32 AryIdx = 0;
u8 value = 0;
u32 offset = 0;
u32 pollingCount = 0; /* polling autoload done. */
u32 maxPollingCnt = 5000;
do {
PwrCfgCmd = PwrSeqCmd[AryIdx];
RT_TRACE(_module_hal_init_c_ , _drv_info_,
("HalPwrSeqCmdParsing: offset(%#x) cut_msk(%#x) fab_msk(%#x) interface_msk(%#x) base(%#x) cmd(%#x) msk(%#x) value(%#x)\n",
GET_PWR_CFG_OFFSET(PwrCfgCmd),
GET_PWR_CFG_CUT_MASK(PwrCfgCmd),
GET_PWR_CFG_FAB_MASK(PwrCfgCmd),
GET_PWR_CFG_INTF_MASK(PwrCfgCmd),
GET_PWR_CFG_BASE(PwrCfgCmd),
GET_PWR_CFG_CMD(PwrCfgCmd),
GET_PWR_CFG_MASK(PwrCfgCmd),
GET_PWR_CFG_VALUE(PwrCfgCmd)));
/* 2 Only Handle the command whose FAB, CUT, and Interface are matched */
if ((GET_PWR_CFG_FAB_MASK(PwrCfgCmd) & FabVersion) &&
(GET_PWR_CFG_CUT_MASK(PwrCfgCmd) & CutVersion) &&
(GET_PWR_CFG_INTF_MASK(PwrCfgCmd) & InterfaceType))
{
switch (GET_PWR_CFG_CMD(PwrCfgCmd))
{
case PWR_CMD_READ:
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_READ\n"));
break;
case PWR_CMD_WRITE:
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_WRITE\n"));
offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);
#ifdef CONFIG_SDIO_HCI
/* */
/* <Roger_Notes> We should deal with interface specific address mapping for some interfaces, e.g., SDIO interface */
/* 2011.07.07. */
/* */
if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
{
/* Read Back SDIO Local value */
value = SdioLocalCmd52Read1Byte(padapter, offset);
value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));
/* Write Back SDIO Local value */
SdioLocalCmd52Write1Byte(padapter, offset, value);
}
else
#endif
{
#ifdef CONFIG_GSPI_HCI
if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
offset = SPI_LOCAL_OFFSET | offset;
#endif
/* Read the value from system register */
value = rtw_read8(padapter, offset);
value &= ~(GET_PWR_CFG_MASK(PwrCfgCmd));
value |= (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd));
/* Write the value back to sytem register */
rtw_write8(padapter, offset, value);
}
break;
case PWR_CMD_POLLING:
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_POLLING\n"));
bPollingBit = false;
offset = GET_PWR_CFG_OFFSET(PwrCfgCmd);
#ifdef CONFIG_GSPI_HCI
if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
offset = SPI_LOCAL_OFFSET | offset;
#endif
do {
#ifdef CONFIG_SDIO_HCI
if (GET_PWR_CFG_BASE(PwrCfgCmd) == PWR_BASEADDR_SDIO)
value = SdioLocalCmd52Read1Byte(padapter, offset);
else
#endif
value = rtw_read8(padapter, offset);
value &= GET_PWR_CFG_MASK(PwrCfgCmd);
if (value == (GET_PWR_CFG_VALUE(PwrCfgCmd) & GET_PWR_CFG_MASK(PwrCfgCmd)))
bPollingBit = true;
else
rtw_udelay_os(10);
if (pollingCount++ > maxPollingCnt) {
DBG_88E("Fail to polling Offset[%#x]\n", offset);
return false;
}
} while (!bPollingBit);
break;
case PWR_CMD_DELAY:
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_DELAY\n"));
if (GET_PWR_CFG_VALUE(PwrCfgCmd) == PWRSEQ_DELAY_US)
rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd));
else
rtw_udelay_os(GET_PWR_CFG_OFFSET(PwrCfgCmd)*1000);
break;
case PWR_CMD_END:
/* When this command is parsed, end the process */
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_END\n"));
return true;
break;
default:
RT_TRACE(_module_hal_init_c_ , _drv_err_, ("HalPwrSeqCmdParsing: Unknown CMD!!\n"));
break;
}
}
AryIdx++;/* Add Array Index */
}while (1);
return true;
}