skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-10 07:29:40 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/hal/rtl8188e_mp.c
Larry Finger c5e461c221 rtl8188eu: Remove configuration parameters and dead code for other devices 
The vendor code includes some code that is needed for RTL8182CU, RTL8192DU,
RTL8711, RTL8712, and RTL8723AU. This dead code is removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-07-11 10:59:02 -05:00

997 lines
31 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#define _RTL8188E_MP_C_
#ifdef CONFIG_MP_INCLUDED
#include <drv_types.h>
#include <rtw_mp.h>
#include <rtl8188e_hal.h>
#include <rtl8188e_dm.h>
s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
if (!netif_running(padapter->pnetdev)) {
RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: interface not opened!\n"));
return _FAIL;
}
if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == false) {
RT_TRACE(_module_mp_, _drv_warning_, ("SetPowerTracking! Fail: not in MP mode!\n"));
return _FAIL;
}
if (enable)
{
pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true;
}
else
pDM_Odm->RFCalibrateInfo.bTXPowerTrackingInit= false;
return _SUCCESS;
}
void Hal_GetPowerTracking(PADAPTER padapter, u8 *enable)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
*enable = pDM_Odm->RFCalibrateInfo.TxPowerTrackControl;
}
static void Hal_disable_dm(PADAPTER padapter)
{
u8 v8;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
/* 3 1. disable firmware dynamic mechanism */
/* disable Power Training, Rate Adaptive */
v8 = rtw_read8(padapter, REG_BCN_CTRL);
v8 &= ~EN_BCN_FUNCTION;
rtw_write8(padapter, REG_BCN_CTRL, v8);
/* 3 2. disable driver dynamic mechanism */
/* disable Dynamic Initial Gain */
/* disable High Power */
/* disable Power Tracking */
Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, false);
/* enable APK, LCK and IQK but disable power tracking */
pDM_Odm->RFCalibrateInfo.TxPowerTrackControl = false;
Switch_DM_Func(padapter, DYNAMIC_FUNC_DISABLE, true);
}
/*-----------------------------------------------------------------------------
* Function: mpt_SwitchRfSetting
*
* Overview: Change RF Setting when we siwthc channel/rate/BW for MP.
*
* Input: PADAPTER pAdapter
*
* Output: NONE
*
* Return: NONE
*
* Revised History:
* When Who Remark
* 01/08/2009 MHC Suggestion from SD3 Willis for 92S series.
* 01/09/2009 MHC Add CCK modification for 40MHZ. Suggestion from SD3.
*
*---------------------------------------------------------------------------*/
void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter)
{
/* HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter); */
struct mp_priv *pmp = &pAdapter->mppriv;
u1Byte ChannelToSw = pmp->channel;
ULONG ulRateIdx = pmp->rateidx;
ULONG ulbandwidth = pmp->bandwidth;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
/* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis. */
pmp->MptCtx.backup0x52_RF_A = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0);
pmp->MptCtx.backup0x52_RF_B = (u1Byte)PHY_QueryRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0);
PHY_SetRFReg(pAdapter, RF_PATH_A, RF_0x52, 0x000F0, 0xD);
PHY_SetRFReg(pAdapter, RF_PATH_B, RF_0x52, 0x000F0, 0xD);
return ;
}
/*---------------------------hal\rtl8192c\MPT_Phy.c---------------------------*/
/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, bool bInCH14)
{
u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0;
u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12;
u8 i;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
/* get current cck swing value and check 0xa22 & 0xa23 later to match the table. */
CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);
if (!bInCH14)
{
/* Readback the current bb cck swing value and compare with the table to */
/* get the current swing index */
for (i = 0; i < CCK_TABLE_SIZE; i++)
{
if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch1_Ch13[i][0]) &&
(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch1_Ch13[i][1]))
{
CCKSwingIndex = i;
break;
}
}
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][0] +
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][1]<<8) ;
/* Write 0xa24 ~ 0xa27 */
TempVal2 = 0;
TempVal2 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][2] +
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][3]<<8) +
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][4]<<16 )+
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][5]<<24);
/* Write 0xa28 0xa29 */
TempVal3 = 0;
TempVal3 = CCKSwingTable_Ch1_Ch13[CCKSwingIndex][6] +
(CCKSwingTable_Ch1_Ch13[CCKSwingIndex][7]<<8) ;
}
else
{
for (i = 0; i < CCK_TABLE_SIZE; i++)
{
if (((CurrCCKSwingVal&0xff) == (u32)CCKSwingTable_Ch14[i][0]) &&
(((CurrCCKSwingVal&0xff00)>>8) == (u32)CCKSwingTable_Ch14[i][1]))
{
CCKSwingIndex = i;
break;
}
}
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[CCKSwingIndex][0] +
(CCKSwingTable_Ch14[CCKSwingIndex][1]<<8) ;
/* Write 0xa24 ~ 0xa27 */
TempVal2 = 0;
TempVal2 = CCKSwingTable_Ch14[CCKSwingIndex][2] +
(CCKSwingTable_Ch14[CCKSwingIndex][3]<<8) +
(CCKSwingTable_Ch14[CCKSwingIndex][4]<<16 )+
(CCKSwingTable_Ch14[CCKSwingIndex][5]<<24);
/* Write 0xa28 0xa29 */
TempVal3 = 0;
TempVal3 = CCKSwingTable_Ch14[CCKSwingIndex][6] +
(CCKSwingTable_Ch14[CCKSwingIndex][7]<<8) ;
}
write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
}
void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, bool beven)
{
s32 TempCCk;
u8 CCK_index, CCK_index_old;
u8 Action = 0; /* 0: no action, 1: even->odd, 2:odd->even */
u8 TimeOut = 100;
s32 i = 0;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx;
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
if (!IS_92C_SERIAL(pHalData->VersionID))
return;
if (beven && !pMptCtx->bMptIndexEven) /* odd->even */
{
Action = 2;
pMptCtx->bMptIndexEven = true;
}
else if (!beven && pMptCtx->bMptIndexEven) /* even->odd */
{
Action = 1;
pMptCtx->bMptIndexEven = false;
}
if (Action != 0)
{
/* Query CCK default setting From 0xa24 */
TempCCk = read_bbreg(pAdapter, rCCK0_TxFilter2, bMaskDWord) & bMaskCCK;
for (i = 0; i < CCK_TABLE_SIZE; i++)
{
if (pDM_Odm->RFCalibrateInfo.bCCKinCH14)
{
if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch14[i][2], 4) == true)
{
CCK_index_old = (u8) i;
break;
}
}
else
{
if (_rtw_memcmp((void*)&TempCCk, (void*)&CCKSwingTable_Ch1_Ch13[i][2], 4) == true)
{
CCK_index_old = (u8) i;
break;
}
}
}
if (Action == 1)
CCK_index = CCK_index_old - 1;
else
CCK_index = CCK_index_old + 1;
/* Adjust CCK according to gain index */
if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
} else {
rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
}
}
}
/*---------------------------hal\rtl8192c\MPT_HelperFunc.c---------------------------*/
/*
* SetChannel
* Description
* Use H2C command to change channel,
* not only modify rf register, but also other setting need to be done.
*/
void Hal_SetChannel(PADAPTER pAdapter)
{
u8 eRFPath;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
struct mp_priv *pmp = &pAdapter->mppriv;
struct dm_priv *pdmpriv = &pHalData->dmpriv;
PDM_ODM_T pDM_Odm = &(pHalData->odmpriv);
u8 channel = pmp->channel;
u8 bandwidth = pmp->bandwidth;
u8 rate = pmp->rateidx;
/* set RF channel register */
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
{
if (IS_HARDWARE_TYPE_8192D(pAdapter))
_write_rfreg(pAdapter, (RF_RADIO_PATH_E)eRFPath, ODM_CHANNEL, 0xFF, channel);
else
_write_rfreg(pAdapter, eRFPath, ODM_CHANNEL, 0x3FF, channel);
}
Hal_mpt_SwitchRfSetting(pAdapter);
SelectChannel(pAdapter, channel);
if (pHalData->CurrentChannel == 14 && !pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
pDM_Odm->RFCalibrateInfo.bCCKinCH14 = true;
Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
}
else if (pHalData->CurrentChannel != 14 && pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
pDM_Odm->RFCalibrateInfo.bCCKinCH14 = false;
Hal_MPT_CCKTxPowerAdjust(pAdapter, pDM_Odm->RFCalibrateInfo.bCCKinCH14);
}
}
/*
* Notice
* Switch bandwitdth may change center frequency(channel)
*/
void Hal_SetBandwidth(PADAPTER pAdapter)
{
struct mp_priv *pmp = &pAdapter->mppriv;
SetBWMode(pAdapter, pmp->bandwidth, pmp->prime_channel_offset);
Hal_mpt_SwitchRfSetting(pAdapter);
}
void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 *TxPower)
{
u32 tmpval = 0;
/* rf-A cck tx power */
write_bbreg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, TxPower[RF_PATH_A]);
tmpval = (TxPower[RF_PATH_A]<<16) | (TxPower[RF_PATH_A]<<8) | TxPower[RF_PATH_A];
write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
/* rf-B cck tx power */
write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]);
tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B];
write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
RT_TRACE(_module_mp_, _drv_notice_,
("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n",
TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
}
void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 *TxPower)
{
u32 TxAGC = 0;
u8 tmpval = 0;
PMPT_CONTEXT pMptCtx = &pAdapter->mppriv.MptCtx;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
/* HT Tx-rf(A) */
tmpval = TxPower[RF_PATH_A];
TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
write_bbreg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);
/* HT Tx-rf(B) */
tmpval = TxPower[RF_PATH_B];
TxAGC = (tmpval<<24) | (tmpval<<16) | (tmpval<<8) | tmpval;
write_bbreg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
write_bbreg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);
}
void Hal_SetAntennaPathPower(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u8 TxPowerLevel[MAX_RF_PATH_NUMS];
u8 rfPath;
TxPowerLevel[RF_PATH_A] = pAdapter->mppriv.txpoweridx;
TxPowerLevel[RF_PATH_B] = pAdapter->mppriv.txpoweridx_b;
switch (pAdapter->mppriv.antenna_tx)
{
case ANTENNA_A:
default:
rfPath = RF_PATH_A;
break;
case ANTENNA_B:
rfPath = RF_PATH_B;
break;
case ANTENNA_C:
rfPath = RF_PATH_C;
break;
}
switch (pHalData->rf_chip)
{
case RF_8225:
case RF_8256:
case RF_6052:
Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
break;
default:
break;
}
}
void Hal_SetTxPower(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u8 TxPower = pAdapter->mppriv.txpoweridx;
u8 TxPowerLevel[MAX_RF_PATH_NUMS];
u8 rf, rfPath;
for (rf = 0; rf < MAX_RF_PATH_NUMS; rf++) {
TxPowerLevel[rf] = TxPower;
}
switch (pAdapter->mppriv.antenna_tx)
{
case ANTENNA_A:
default:
rfPath = RF_PATH_A;
break;
case ANTENNA_B:
rfPath = RF_PATH_B;
break;
case ANTENNA_C:
rfPath = RF_PATH_C;
break;
}
switch (pHalData->rf_chip)
{
/* 2008/09/12 MH Test only !! We enable the TX power tracking for MP!!!!! */
/* We should call normal driver API later!! */
case RF_8225:
case RF_8256:
case RF_6052:
Hal_SetCCKTxPower(pAdapter, TxPowerLevel);
if (pAdapter->mppriv.rateidx < MPT_RATE_6M) /* CCK rate */
Hal_MPT_CCKTxPowerAdjustbyIndex(pAdapter, TxPowerLevel[rfPath]%2 == 0);
Hal_SetOFDMTxPower(pAdapter, TxPowerLevel);
break;
default:
break;
}
}
void Hal_SetDataRate(PADAPTER pAdapter)
{
Hal_mpt_SwitchRfSetting(pAdapter);
}
void Hal_SetAntenna(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */
R_ANTENNA_SELECT_CCK *p_cck_txrx;
u8 r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
u8 chgTx = 0, chgRx = 0;
u32 r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;
p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val;
p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val;
p_ofdm_tx->r_ant_ht1 = 0x1;
p_ofdm_tx->r_ant_ht2 = 0x2; /* Second TX RF path is A */
p_ofdm_tx->r_ant_non_ht = 0x3; /* 0x1+0x2=0x3 */
switch (pAdapter->mppriv.antenna_tx)
{
case ANTENNA_A:
p_ofdm_tx->r_tx_antenna = 0x1;
r_ofdm_tx_en_val = 0x1;
p_ofdm_tx->r_ant_l = 0x1;
p_ofdm_tx->r_ant_ht_s1 = 0x1;
p_ofdm_tx->r_ant_non_ht_s1 = 0x1;
p_cck_txrx->r_ccktx_enable = 0x8;
chgTx = 1;
/* From SD3 Willis suggestion !!! Set RF A=TX and B as standby */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
r_ofdm_tx_en_val = 0x3;
/* Power save */
/* cosa r_ant_select_ofdm_val = 0x11111111; */
/* We need to close RFB by SW control */
if (pHalData->rf_type == RF_2T2R)
{
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
PHY_SetBBReg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
}
break;
case ANTENNA_B:
p_ofdm_tx->r_tx_antenna = 0x2;
r_ofdm_tx_en_val = 0x2;
p_ofdm_tx->r_ant_l = 0x2;
p_ofdm_tx->r_ant_ht_s1 = 0x2;
p_ofdm_tx->r_ant_non_ht_s1 = 0x2;
p_cck_txrx->r_ccktx_enable = 0x4;
chgTx = 1;
/* From SD3 Willis suggestion !!! Set RF A as standby */
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
/* Power save */
/* cosa r_ant_select_ofdm_val = 0x22222222; */
/* 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table. */
/* 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control */
if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R)
{
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
PHY_SetBBReg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
}
break;
case ANTENNA_AB: /* For 8192S */
p_ofdm_tx->r_tx_antenna = 0x3;
r_ofdm_tx_en_val = 0x3;
p_ofdm_tx->r_ant_l = 0x3;
p_ofdm_tx->r_ant_ht_s1 = 0x3;
p_ofdm_tx->r_ant_non_ht_s1 = 0x3;
p_cck_txrx->r_ccktx_enable = 0xC;
chgTx = 1;
/* From SD3 Willis suggestion !!! Set RF B as standby */
PHY_SetBBReg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
PHY_SetBBReg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
/* Disable Power save */
/* cosa r_ant_select_ofdm_val = 0x3321333; */
/* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control */
if (pHalData->rf_type == RF_2T2R)
{
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
PHY_SetBBReg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
}
break;
default:
break;
}
/* */
/* r_rx_antenna_ofdm, bit0=A, bit1=B, bit2=C, bit3=D */
/* r_cckrx_enable : CCK default, 0=A, 1=B, 2=C, 3=D */
/* r_cckrx_enable_2 : CCK option, 0=A, 1=B, 2=C, 3=D */
/* */
switch (pAdapter->mppriv.antenna_rx)
{
case ANTENNA_A:
r_rx_antenna_ofdm = 0x1; /* A */
p_cck_txrx->r_cckrx_enable = 0x0; /* default: A */
p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A */
chgRx = 1;
break;
case ANTENNA_B:
r_rx_antenna_ofdm = 0x2; /* B */
p_cck_txrx->r_cckrx_enable = 0x1; /* default: B */
p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option: B */
chgRx = 1;
break;
case ANTENNA_AB:
r_rx_antenna_ofdm = 0x3; /* AB */
p_cck_txrx->r_cckrx_enable = 0x0; /* default:A */
p_cck_txrx->r_cckrx_enable_2 = 0x1; /* option:B */
chgRx = 1;
break;
default:
break;
}
if (chgTx && chgRx)
{
switch (pHalData->rf_chip)
{
case RF_8225:
case RF_8256:
case RF_6052:
/* r_ant_sel_cck_val = r_ant_select_cck_val; */
PHY_SetBBReg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /* OFDM Tx */
PHY_SetBBReg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /* OFDM Tx */
PHY_SetBBReg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */
PHY_SetBBReg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /* OFDM Rx */
PHY_SetBBReg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val); /* CCK TxRx */
break;
default:
break;
}
}
RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
}
s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
if (!netif_running(pAdapter->pnetdev)) {
RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
return _FAIL;
}
if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false) {
RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
return _FAIL;
}
target_ther &= 0xff;
if (target_ther < 0x07)
target_ther = 0x07;
else if (target_ther > 0x1d)
target_ther = 0x1d;
pHalData->EEPROMThermalMeter = target_ther;
return _SUCCESS;
}
void Hal_TriggerRFThermalMeter(PADAPTER pAdapter)
{
_write_rfreg( pAdapter, RF_PATH_A , RF_T_METER_88E , BIT17 |BIT16 , 0x03 );
}
u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter)
{
u32 ThermalValue = 0;
ThermalValue = _read_rfreg(pAdapter, RF_PATH_A, RF_T_METER_88E, 0xfc00);
return (u8)ThermalValue;
}
void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value)
{
Hal_TriggerRFThermalMeter(pAdapter);
rtw_msleep_os(1000);
*value = Hal_ReadRFThermalMeter(pAdapter);
}
void Hal_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
if (bStart)/* Start Single Carrier. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test start\n"));
/* 1. if OFDM block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
{
/* 2. set CCK test mode off, set to CCK normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
/* 3. turn on scramble setting */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
}
/* 4. Turn On Single Carrier Tx and turn off the other test modes. */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bEnable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
}
else/* Stop Single Carrier. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleCarrierTx: test stop\n"));
/* Turn off all test modes. */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
rtw_msleep_os(10);
/* BB Reset */
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
}
void Hal_SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
bool is92C = IS_92C_SERIAL(pHalData->VersionID);
u8 rfPath;
u32 reg58 = 0x0;
switch (pAdapter->mppriv.antenna_tx)
{
case ANTENNA_A:
default:
rfPath = RF_PATH_A;
break;
case ANTENNA_B:
rfPath = RF_PATH_B;
break;
case ANTENNA_C:
rfPath = RF_PATH_C;
break;
}
pAdapter->mppriv.MptCtx.bSingleTone = bStart;
if (bStart)/* Start Single Tone. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test start\n"));
{ /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
if (IS_HARDWARE_TYPE_8188E(pAdapter))
{
reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
reg58 &= 0xFFFFFFF0;
reg58 += 2;
PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
}
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
}
if (is92C)
{
_write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x01);
rtw_usleep_os(100);
if (rfPath == RF_PATH_A)
write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x10000); /* PAD all on. */
else if (rfPath == RF_PATH_B)
write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x10000); /* PAD all on. */
write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
rtw_usleep_os(100);
}
else
{
write_rfreg(pAdapter, rfPath, 0x21, 0xd4000);
rtw_usleep_os(100);
write_rfreg(pAdapter, rfPath, 0x00, 0x2001f); /* PAD all on. */
rtw_usleep_os(100);
}
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
}
else/* Stop Single Tone. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetSingleToneTx: test stop\n"));
{ /* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
/* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
if (IS_HARDWARE_TYPE_8188E(pAdapter))
{
reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
reg58 &= 0xFFFFFFF0;
PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
}
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}
if (is92C) {
_write_rfreg(pAdapter, RF_PATH_A, 0x21, BIT19, 0x00);
rtw_usleep_os(100);
write_rfreg(pAdapter, RF_PATH_A, 0x00, 0x32d75); /* PAD all on. */
write_rfreg(pAdapter, RF_PATH_B, 0x00, 0x32d75); /* PAD all on. */
rtw_usleep_os(100);
} else {
write_rfreg(pAdapter, rfPath, 0x21, 0x54000);
rtw_usleep_os(100);
write_rfreg(pAdapter, rfPath, 0x00, 0x30000); /* PAD all on. */
rtw_usleep_os(100);
}
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
}
void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
{
pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
if (bStart) /* Start Carrier Suppression. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
{
/* 1. if CCK block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */
/* Turn Off All Test Mode */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /* turn off scramble setting */
/* Set CCK Tx Test Rate */
write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /* Set FTxRate to 1Mbps */
}
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
}
else/* Stop Carrier Suppression. */
{
RT_TRACE(_module_mp_,_drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M ) {
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /* turn on scramble setting */
/* BB Reset */
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
}
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
}
void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart)
{
u32 cckrate;
if (bStart)
{
RT_TRACE(_module_mp_, _drv_alert_,
("SetCCKContinuousTx: test start\n"));
/* 1. if CCK block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */
/* Turn Off All Test Mode */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
/* Set CCK Tx Test Rate */
cckrate = pAdapter->mppriv.rateidx;
write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /* transmit mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
}
else {
RT_TRACE(_module_mp_, _drv_info_,
("SetCCKContinuousTx: test stop\n"));
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */
/* BB Reset */
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
pAdapter->mppriv.MptCtx.bCckContTx = bStart;
pAdapter->mppriv.MptCtx.bOfdmContTx = false;
}/* mpt_StartCckContTx */
void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
if (bStart) {
RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));
/* 1. if OFDM block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
{
/* 2. set CCK test mode off, set to CCK normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, bDisable);
/* 3. turn on scramble setting */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable);
}
/* 4. Turn On Continue Tx and turn off the other test modes. */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bEnable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
/* for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {
RT_TRACE(_module_mp_,_drv_info_, ("SetOFDMContinuousTx: test stop\n"));
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
/* Delay 10 ms */
rtw_msleep_os(10);
/* BB Reset */
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
/* Stop for dynamic set Power index. */
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
pAdapter->mppriv.MptCtx.bCckContTx = false;
pAdapter->mppriv.MptCtx.bOfdmContTx = bStart;
}/* mpt_StartOfdmContTx */
void Hal_SetContinuousTx(PADAPTER pAdapter, u8 bStart)
{
RT_TRACE(_module_mp_, _drv_info_,
("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
pAdapter->mppriv.MptCtx.bStartContTx = bStart;
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
{
Hal_SetCCKContinuousTx(pAdapter, bStart);
}
else if ((pAdapter->mppriv.rateidx >= MPT_RATE_6M) &&
(pAdapter->mppriv.rateidx <= MPT_RATE_MCS15))
{
Hal_SetOFDMContinuousTx(pAdapter, bStart);
}
}
#endif /* CONFIG_MP_INCLUDE */
Reference in a new issue View git blame Copy permalink