skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-09-20 16:17:06 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/include/rtw_cmd.h
Larry Finger c5e461c221 rtl8188eu: Remove configuration parameters and dead code for other devices 
The vendor code includes some code that is needed for RTL8182CU, RTL8192DU,
RTL8711, RTL8712, and RTL8723AU. This dead code is removed.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-07-11 10:59:02 -05:00

1151 lines
24 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __RTW_CMD_H_
#define __RTW_CMD_H_
#include <drv_conf.h>
#include <wlan_bssdef.h>
#include <rtw_rf.h>
#include <rtw_led.h>
#define C2H_MEM_SZ (16*1024)
#include <osdep_service.h>
#include <ieee80211.h> // <ieee80211/ieee80211.h>
#define FREE_CMDOBJ_SZ 128
#define MAX_CMDSZ 1024
#define MAX_RSPSZ 512
#define MAX_EVTSZ 1024
#define CMDBUFF_ALIGN_SZ 512
struct cmd_obj {
_adapter *padapter;
u16 cmdcode;
u8 res;
u8 *parmbuf;
u32 cmdsz;
u8 *rsp;
u32 rspsz;
//_sema cmd_sem;
_list list;
};
struct cmd_priv {
_sema cmd_queue_sema;
//_sema cmd_done_sema;
_sema terminate_cmdthread_sema;
_queue cmd_queue;
u8 cmd_seq;
u8 *cmd_buf; //shall be non-paged, and 4 bytes aligned
u8 *cmd_allocated_buf;
u8 *rsp_buf; //shall be non-paged, and 4 bytes aligned
u8 *rsp_allocated_buf;
u32 cmd_issued_cnt;
u32 cmd_done_cnt;
u32 rsp_cnt;
u8 cmdthd_running;
_adapter *padapter;
};
#ifdef CONFIG_EVENT_THREAD_MODE
struct evt_obj {
u16 evtcode;
u8 res;
u8 *parmbuf;
u32 evtsz;
_list list;
};
#endif
struct evt_priv {
#ifdef CONFIG_EVENT_THREAD_MODE
_sema evt_notify;
_sema terminate_evtthread_sema;
_queue evt_queue;
#endif
#define CONFIG_C2H_WK
#ifdef CONFIG_C2H_WK
_workitem c2h_wk;
bool c2h_wk_alive;
struct rtw_cbuf *c2h_queue;
#define C2H_QUEUE_MAX_LEN 10
#endif
#ifdef CONFIG_H2CLBK
_sema lbkevt_done;
u8 lbkevt_limit;
u8 lbkevt_num;
u8 *cmdevt_parm;
#endif
ATOMIC_T event_seq;
u8 *evt_buf; //shall be non-paged, and 4 bytes aligned
u8 *evt_allocated_buf;
u32 evt_done_cnt;
#if defined(CONFIG_SDIO_HCI) || defined(CONFIG_GSPI_HCI)
u8 *c2h_mem;
u8 *allocated_c2h_mem;
#endif
};
#define init_h2fwcmd_w_parm_no_rsp(pcmd, pparm, code) \
do {\
_rtw_init_listhead(&pcmd->list);\
pcmd->cmdcode = code;\
pcmd->parmbuf = (u8 *)(pparm);\
pcmd->cmdsz = sizeof (*pparm);\
pcmd->rsp = NULL;\
pcmd->rspsz = 0;\
} while (0)
struct c2h_evt_hdr {
u8 id:4;
u8 plen:4;
u8 seq;
u8 payload[0];
};
#define c2h_evt_exist(c2h_evt) ((c2h_evt)->id || (c2h_evt)->plen)
extern u32 rtw_enqueue_cmd(struct cmd_priv *pcmdpriv, struct cmd_obj *obj);
extern struct cmd_obj *rtw_dequeue_cmd(struct cmd_priv *pcmdpriv);
extern void rtw_free_cmd_obj(struct cmd_obj *pcmd);
#ifdef CONFIG_EVENT_THREAD_MODE
extern u32 rtw_enqueue_evt(struct evt_priv *pevtpriv, struct evt_obj *obj);
extern struct evt_obj *rtw_dequeue_evt(_queue *queue);
extern void rtw_free_evt_obj(struct evt_obj *pcmd);
#endif
thread_return rtw_cmd_thread(thread_context context);
extern u32 rtw_init_cmd_priv (struct cmd_priv *pcmdpriv);
extern void rtw_free_cmd_priv (struct cmd_priv *pcmdpriv);
extern u32 rtw_init_evt_priv (struct evt_priv *pevtpriv);
extern void rtw_free_evt_priv (struct evt_priv *pevtpriv);
extern void rtw_cmd_clr_isr(struct cmd_priv *pcmdpriv);
extern void rtw_evt_notify_isr(struct evt_priv *pevtpriv);
#ifdef CONFIG_P2P
u8 p2p_protocol_wk_cmd(_adapter*padapter, int intCmdType );
#endif //CONFIG_P2P
enum rtw_drvextra_cmd_id
{
NONE_WK_CID,
DYNAMIC_CHK_WK_CID,
DM_CTRL_WK_CID,
PBC_POLLING_WK_CID,
POWER_SAVING_CTRL_WK_CID,//IPS,AUTOSuspend
LPS_CTRL_WK_CID,
ANT_SELECT_WK_CID,
P2P_PS_WK_CID,
P2P_PROTO_WK_CID,
CHECK_HIQ_WK_CID,//for softap mode, check hi queue if empty
INTEl_WIDI_WK_CID,
C2H_WK_CID,
RTP_TIMER_CFG_WK_CID,
MAX_WK_CID
};
enum LPS_CTRL_TYPE
{
LPS_CTRL_SCAN=0,
LPS_CTRL_JOINBSS=1,
LPS_CTRL_CONNECT=2,
LPS_CTRL_DISCONNECT=3,
LPS_CTRL_SPECIAL_PACKET=4,
LPS_CTRL_LEAVE=5,
};
enum RFINTFS {
SWSI,
HWSI,
HWPI,
};
/*
Caller Mode: Infra, Ad-HoC(C)
Notes: To enter USB suspend mode
Command Mode
*/
struct usb_suspend_parm {
u32 action;// 1: sleep, 0:resume
};
/*
Caller Mode: Infra, Ad-HoC
Notes: To join a known BSS.
Command-Event Mode
*/
/*
Caller Mode: Infra, Ad-Hoc
Notes: To join the specified bss
Command Event Mode
*/
struct joinbss_parm {
WLAN_BSSID_EX network;
};
/*
Caller Mode: Infra, Ad-HoC(C)
Notes: To disconnect the current associated BSS
Command Mode
*/
struct disconnect_parm {
u32 deauth_timeout_ms;
};
/*
Caller Mode: AP, Ad-HoC(M)
Notes: To create a BSS
Command Mode
*/
struct createbss_parm {
WLAN_BSSID_EX network;
};
/*
Caller Mode: AP, Ad-HoC, Infra
Notes: To set the NIC mode of RTL8711
Command Mode
The definition of mode:
#define IW_MODE_AUTO 0 // Let the driver decides which AP to join
#define IW_MODE_ADHOC 1 // Single cell network (Ad-Hoc Clients)
#define IW_MODE_INFRA 2 // Multi cell network, roaming, ..
#define IW_MODE_MASTER 3 // Synchronisation master or Access Point
#define IW_MODE_REPEAT 4 // Wireless Repeater (forwarder)
#define IW_MODE_SECOND 5 // Secondary master/repeater (backup)
#define IW_MODE_MONITOR 6 // Passive monitor (listen only)
*/
struct setopmode_parm {
u8 mode;
u8 rsvd[3];
};
/*
Caller Mode: AP, Ad-HoC, Infra
Notes: To ask RTL8711 performing site-survey
Command-Event Mode
*/
#define RTW_SSID_SCAN_AMOUNT 9 // for WEXT_CSCAN_AMOUNT 9
#define RTW_CHANNEL_SCAN_AMOUNT (14+37)
struct sitesurvey_parm {
sint scan_mode; //active: 1, passive: 0
/* sint bsslimit; // 1 ~ 48 */
u8 ssid_num;
u8 ch_num;
NDIS_802_11_SSID ssid[RTW_SSID_SCAN_AMOUNT];
struct rtw_ieee80211_channel ch[RTW_CHANNEL_SCAN_AMOUNT];
};
/*
Caller Mode: Any
Notes: To set the auth type of RTL8711. open/shared/802.1x
Command Mode
*/
struct setauth_parm {
u8 mode; //0: legacy open, 1: legacy shared 2: 802.1x
u8 _1x; //0: PSK, 1: TLS
u8 rsvd[2];
};
/*
Caller Mode: Infra
a. algorithm: wep40, wep104, tkip & aes
b. keytype: grp key/unicast key
c. key contents
when shared key ==> keyid is the camid
when 802.1x ==> keyid [0:1] ==> grp key
when 802.1x ==> keyid > 2 ==> unicast key
*/
struct setkey_parm {
u8 algorithm; // encryption algorithm, could be none, wep40, TKIP, CCMP, wep104
u8 keyid;
u8 grpkey; // 1: this is the grpkey for 802.1x. 0: this is the unicast key for 802.1x
u8 set_tx; // 1: main tx key for wep. 0: other key.
u8 key[16]; // this could be 40 or 104
};
/*
When in AP or Ad-Hoc mode, this is used to
allocate an sw/hw entry for a newly associated sta.
Command
when shared key ==> algorithm/keyid
*/
struct set_stakey_parm {
u8 addr[ETH_ALEN];
u8 algorithm;
u8 id;// currently for erasing cam entry if algorithm == _NO_PRIVACY_
u8 key[16];
};
struct set_stakey_rsp {
u8 addr[ETH_ALEN];
u8 keyid;
u8 rsvd;
};
/*
Caller Ad-Hoc/AP
Command -Rsp(AID == CAMID) mode
This is to force fw to add an sta_data entry per driver's request.
FW will write an cam entry associated with it.
*/
struct set_assocsta_parm {
u8 addr[ETH_ALEN];
};
struct set_assocsta_rsp {
u8 cam_id;
u8 rsvd[3];
};
/*
Caller Ad-Hoc/AP
Command mode
This is to force fw to del an sta_data entry per driver's request
FW will invalidate the cam entry associated with it.
*/
struct del_assocsta_parm {
u8 addr[ETH_ALEN];
};
/*
Caller Mode: AP/Ad-HoC(M)
Notes: To notify fw that given staid has changed its power state
Command Mode
*/
struct setstapwrstate_parm {
u8 staid;
u8 status;
u8 hwaddr[6];
};
/*
Caller Mode: Any
Notes: To setup the basic rate of RTL8711
Command Mode
*/
struct setbasicrate_parm {
u8 basicrates[NumRates];
};
/*
Caller Mode: Any
Notes: To read the current basic rate
Command-Rsp Mode
*/
struct getbasicrate_parm {
u32 rsvd;
};
struct getbasicrate_rsp {
u8 basicrates[NumRates];
};
/*
Caller Mode: Any
Notes: To setup the data rate of RTL8711
Command Mode
*/
struct setdatarate_parm {
#ifdef MP_FIRMWARE_OFFLOAD
u32 curr_rateidx;
#else
u8 mac_id;
u8 datarates[NumRates];
#endif
};
/*
Caller Mode: Any
Notes: To read the current data rate
Command-Rsp Mode
*/
struct getdatarate_parm {
u32 rsvd;
};
struct getdatarate_rsp {
u8 datarates[NumRates];
};
/*
Caller Mode: Any
AP: AP can use the info for the contents of beacon frame
Infra: STA can use the info when sitesurveying
Ad-HoC(M): Like AP
Ad-HoC(C): Like STA
Notes: To set the phy capability of the NIC
Command Mode
*/
struct setphyinfo_parm {
struct regulatory_class class_sets[NUM_REGULATORYS];
u8 status;
};
struct getphyinfo_parm {
u32 rsvd;
};
struct getphyinfo_rsp {
struct regulatory_class class_sets[NUM_REGULATORYS];
u8 status;
};
/*
Caller Mode: Any
Notes: To set the channel/modem/band
This command will be used when channel/modem/band is changed.
Command Mode
*/
struct setphy_parm {
u8 rfchannel;
u8 modem;
};
/*
Caller Mode: Any
Notes: To get the current setting of channel/modem/band
Command-Rsp Mode
*/
struct getphy_parm {
u32 rsvd;
};
struct getphy_rsp {
u8 rfchannel;
u8 modem;
};
struct readBB_parm {
u8 offset;
};
struct readBB_rsp {
u8 value;
};
struct readTSSI_parm {
u8 offset;
};
struct readTSSI_rsp {
u8 value;
};
struct writeBB_parm {
u8 offset;
u8 value;
};
struct readRF_parm {
u8 offset;
};
struct readRF_rsp {
u32 value;
};
struct writeRF_parm {
u32 offset;
u32 value;
};
struct getrfintfs_parm {
u8 rfintfs;
};
struct Tx_Beacon_param
{
WLAN_BSSID_EX network;
};
/*
Notes: This command is used for H2C/C2H loopback testing
mac[0] == 0
==> CMD mode, return H2C_SUCCESS.
The following condition must be ture under CMD mode
mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
s2 == (b1 << 8 | b0);
mac[0] == 1
==> CMD_RSP mode, return H2C_SUCCESS_RSP
The rsp layout shall be:
rsp: parm:
mac[0] = mac[5];
mac[1] = mac[4];
mac[2] = mac[3];
mac[3] = mac[2];
mac[4] = mac[1];
mac[5] = mac[0];
s0 = s1;
s1 = swap16(s0);
w0 = swap32(w1);
b0 = b1
s2 = s0 + s1
b1 = b0
w1 = w0
mac[0] == 2
==> CMD_EVENT mode, return H2C_SUCCESS
The event layout shall be:
event: parm:
mac[0] = mac[5];
mac[1] = mac[4];
mac[2] = event's sequence number, starting from 1 to parm's marc[3]
mac[3] = mac[2];
mac[4] = mac[1];
mac[5] = mac[0];
s0 = swap16(s0) - event.mac[2];
s1 = s1 + event.mac[2];
w0 = swap32(w0);
b0 = b1
s2 = s0 + event.mac[2]
b1 = b0
w1 = swap32(w1) - event.mac[2];
parm->mac[3] is the total event counts that host requested.
event will be the same with the cmd's param.
*/
#ifdef CONFIG_H2CLBK
struct seth2clbk_parm {
u8 mac[6];
u16 s0;
u16 s1;
u32 w0;
u8 b0;
u16 s2;
u8 b1;
u32 w1;
};
struct geth2clbk_parm {
u32 rsv;
};
struct geth2clbk_rsp {
u8 mac[6];
u16 s0;
u16 s1;
u32 w0;
u8 b0;
u16 s2;
u8 b1;
u32 w1;
};
#endif /* CONFIG_H2CLBK */
// CMD param Formart for driver extra cmd handler
struct drvextra_cmd_parm {
int ec_id; //extra cmd id
int type_size; // Can use this field as the type id or command size
unsigned char *pbuf;
};
/*------------------- Below are used for RF/BB tunning ---------------------*/
struct setantenna_parm {
u8 tx_antset;
u8 rx_antset;
u8 tx_antenna;
u8 rx_antenna;
};
struct enrateadaptive_parm {
u32 en;
};
struct settxagctbl_parm {
u32 txagc[MAX_RATES_LENGTH];
};
struct gettxagctbl_parm {
u32 rsvd;
};
struct gettxagctbl_rsp {
u32 txagc[MAX_RATES_LENGTH];
};
struct setagcctrl_parm {
u32 agcctrl; // 0: pure hw, 1: fw
};
struct setssup_parm {
u32 ss_ForceUp[MAX_RATES_LENGTH];
};
struct getssup_parm {
u32 rsvd;
};
struct getssup_rsp {
u8 ss_ForceUp[MAX_RATES_LENGTH];
};
struct setssdlevel_parm {
u8 ss_DLevel[MAX_RATES_LENGTH];
};
struct getssdlevel_parm {
u32 rsvd;
};
struct getssdlevel_rsp {
u8 ss_DLevel[MAX_RATES_LENGTH];
};
struct setssulevel_parm {
u8 ss_ULevel[MAX_RATES_LENGTH];
};
struct getssulevel_parm {
u32 rsvd;
};
struct getssulevel_rsp {
u8 ss_ULevel[MAX_RATES_LENGTH];
};
struct setcountjudge_parm {
u8 count_judge[MAX_RATES_LENGTH];
};
struct getcountjudge_parm {
u32 rsvd;
};
struct getcountjudge_rsp {
u8 count_judge[MAX_RATES_LENGTH];
};
struct setratable_parm {
u8 ss_ForceUp[NumRates];
u8 ss_ULevel[NumRates];
u8 ss_DLevel[NumRates];
u8 count_judge[NumRates];
};
struct getratable_parm {
uint rsvd;
};
struct getratable_rsp {
u8 ss_ForceUp[NumRates];
u8 ss_ULevel[NumRates];
u8 ss_DLevel[NumRates];
u8 count_judge[NumRates];
};
//to get TX,RX retry count
struct gettxretrycnt_parm{
unsigned int rsvd;
};
struct gettxretrycnt_rsp{
unsigned long tx_retrycnt;
};
struct getrxretrycnt_parm{
unsigned int rsvd;
};
struct getrxretrycnt_rsp{
unsigned long rx_retrycnt;
};
//to get BCNOK,BCNERR count
struct getbcnokcnt_parm{
unsigned int rsvd;
};
struct getbcnokcnt_rsp{
unsigned long bcnokcnt;
};
struct getbcnerrcnt_parm{
unsigned int rsvd;
};
struct getbcnerrcnt_rsp{
unsigned long bcnerrcnt;
};
// to get current TX power level
struct getcurtxpwrlevel_parm{
unsigned int rsvd;
};
struct getcurtxpwrlevel_rsp{
unsigned short tx_power;
};
struct setprobereqextraie_parm {
unsigned char e_id;
unsigned char ie_len;
unsigned char ie[0];
};
struct setassocreqextraie_parm {
unsigned char e_id;
unsigned char ie_len;
unsigned char ie[0];
};
struct setproberspextraie_parm {
unsigned char e_id;
unsigned char ie_len;
unsigned char ie[0];
};
struct setassocrspextraie_parm {
unsigned char e_id;
unsigned char ie_len;
unsigned char ie[0];
};
struct addBaReq_parm
{
unsigned int tid;
u8 addr[ETH_ALEN];
};
/*H2C Handler index: 46 */
struct set_ch_parm {
u8 ch;
u8 bw;
u8 ch_offset;
};
#ifdef MP_FIRMWARE_OFFLOAD
/*H2C Handler index: 47 */
struct SetTxPower_parm
{
u8 TxPower;
};
/*H2C Handler index: 48 */
struct SwitchAntenna_parm
{
u16 antenna_tx;
u16 antenna_rx;
// R_ANTENNA_SELECT_CCK cck_txrx;
u8 cck_txrx;
};
/*H2C Handler index: 49 */
struct SetCrystalCap_parm
{
u32 curr_crystalcap;
};
/*H2C Handler index: 50 */
struct SetSingleCarrierTx_parm
{
u8 bStart;
};
/*H2C Handler index: 51 */
struct SetSingleToneTx_parm
{
u8 bStart;
u8 curr_rfpath;
};
/*H2C Handler index: 52 */
struct SetCarrierSuppressionTx_parm
{
u8 bStart;
u32 curr_rateidx;
};
/*H2C Handler index: 53 */
struct SetContinuousTx_parm
{
u8 bStart;
u8 CCK_flag; /*1:CCK 2:OFDM*/
u32 curr_rateidx;
};
/*H2C Handler index: 54 */
struct SwitchBandwidth_parm
{
u8 curr_bandwidth;
};
#endif /* MP_FIRMWARE_OFFLOAD */
/*H2C Handler index: 59 */
struct SetChannelPlan_param
{
u8 channel_plan;
};
/*H2C Handler index: 60 */
struct LedBlink_param
{
PLED_871x pLed;
};
/*H2C Handler index: 61 */
struct SetChannelSwitch_param
{
u8 new_ch_no;
};
/*H2C Handler index: 62 */
struct TDLSoption_param
{
u8 addr[ETH_ALEN];
u8 option;
};
#define GEN_CMD_CODE(cmd) cmd ## _CMD_
/*
Result:
0x00: success
0x01: sucess, and check Response.
0x02: cmd ignored due to duplicated sequcne number
0x03: cmd dropped due to invalid cmd code
0x04: reserved.
*/
#define H2C_RSP_OFFSET 512
#define H2C_SUCCESS 0x00
#define H2C_SUCCESS_RSP 0x01
#define H2C_DUPLICATED 0x02
#define H2C_DROPPED 0x03
#define H2C_PARAMETERS_ERROR 0x04
#define H2C_REJECTED 0x05
#define H2C_CMD_OVERFLOW 0x06
#define H2C_RESERVED 0x07
extern u8 rtw_setassocsta_cmd(_adapter *padapter, u8 *mac_addr);
extern u8 rtw_setstandby_cmd(_adapter *padapter, uint action);
u8 rtw_sitesurvey_cmd(_adapter *padapter, NDIS_802_11_SSID *ssid, int ssid_num, struct rtw_ieee80211_channel *ch, int ch_num);
extern u8 rtw_createbss_cmd(_adapter *padapter);
extern u8 rtw_createbss_cmd_ex(_adapter *padapter, unsigned char *pbss, unsigned int sz);
extern u8 rtw_setphy_cmd(_adapter *padapter, u8 modem, u8 ch);
extern u8 rtw_setstakey_cmd(_adapter *padapter, u8 *psta, u8 unicast_key);
extern u8 rtw_clearstakey_cmd(_adapter *padapter, u8 *psta, u8 entry, u8 enqueue);
extern u8 rtw_joinbss_cmd(_adapter *padapter, struct wlan_network* pnetwork);
u8 rtw_disassoc_cmd(_adapter *padapter, u32 deauth_timeout_ms, bool enqueue);
extern u8 rtw_setopmode_cmd(_adapter *padapter, NDIS_802_11_NETWORK_INFRASTRUCTURE networktype);
extern u8 rtw_setdatarate_cmd(_adapter *padapter, u8 *rateset);
extern u8 rtw_setbasicrate_cmd(_adapter *padapter, u8 *rateset);
extern u8 rtw_setbbreg_cmd(_adapter * padapter, u8 offset, u8 val);
extern u8 rtw_setrfreg_cmd(_adapter * padapter, u8 offset, u32 val);
extern u8 rtw_getbbreg_cmd(_adapter * padapter, u8 offset, u8 * pval);
extern u8 rtw_getrfreg_cmd(_adapter * padapter, u8 offset, u8 * pval);
extern u8 rtw_setrfintfs_cmd(_adapter *padapter, u8 mode);
extern u8 rtw_setrttbl_cmd(_adapter *padapter, struct setratable_parm *prate_table);
extern u8 rtw_getrttbl_cmd(_adapter *padapter, struct getratable_rsp *pval);
extern u8 rtw_gettssi_cmd(_adapter *padapter, u8 offset,u8 *pval);
extern u8 rtw_setfwdig_cmd(_adapter*padapter, u8 type);
extern u8 rtw_setfwra_cmd(_adapter*padapter, u8 type);
extern u8 rtw_addbareq_cmd(_adapter*padapter, u8 tid, u8 *addr);
extern u8 rtw_dynamic_chk_wk_cmd(_adapter *adapter);
u8 rtw_lps_ctrl_wk_cmd(_adapter*padapter, u8 lps_ctrl_type, u8 enqueue);
#if (RATE_ADAPTIVE_SUPPORT==1)
u8 rtw_rpt_timer_cfg_cmd(_adapter*padapter, u16 minRptTime);
#endif
#ifdef CONFIG_ANTENNA_DIVERSITY
extern u8 rtw_antenna_select_cmd(_adapter*padapter, u8 antenna,u8 enqueue);
#endif
extern u8 rtw_ps_cmd(_adapter*padapter);
#ifdef CONFIG_AP_MODE
u8 rtw_chk_hi_queue_cmd(_adapter*padapter);
#endif
u8 rtw_set_ch_cmd(_adapter*padapter, u8 ch, u8 bw, u8 ch_offset, u8 enqueue);
extern u8 rtw_set_chplan_cmd(_adapter*padapter, u8 chplan, u8 enqueue);
extern u8 rtw_led_blink_cmd(_adapter*padapter, PLED_871x pLed);
extern u8 rtw_set_csa_cmd(_adapter*padapter, u8 new_ch_no);
extern u8 rtw_tdls_cmd(_adapter*padapter, u8 *addr, u8 option);
extern u8 rtw_c2h_wk_cmd(PADAPTER padapter, u8 *c2h_evt);
u8 rtw_drvextra_cmd_hdl(_adapter *padapter, unsigned char *pbuf);
extern void rtw_survey_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_disassoc_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_joinbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_createbss_cmd_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_getbbrfreg_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_readtssi_cmdrsp_callback(_adapter* padapter, struct cmd_obj *pcmd);
extern void rtw_setstaKey_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_setassocsta_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd);
extern void rtw_getrttbl_cmdrsp_callback(_adapter *padapter, struct cmd_obj *pcmd);
struct _cmd_callback {
u32 cmd_code;
void (*callback)(_adapter *padapter, struct cmd_obj *cmd);
};
enum rtw_h2c_cmd
{
GEN_CMD_CODE(_Read_MACREG) , /*0*/
GEN_CMD_CODE(_Write_MACREG) ,
GEN_CMD_CODE(_Read_BBREG) ,
GEN_CMD_CODE(_Write_BBREG) ,
GEN_CMD_CODE(_Read_RFREG) ,
GEN_CMD_CODE(_Write_RFREG) , /*5*/
GEN_CMD_CODE(_Read_EEPROM) ,
GEN_CMD_CODE(_Write_EEPROM) ,
GEN_CMD_CODE(_Read_EFUSE) ,
GEN_CMD_CODE(_Write_EFUSE) ,
GEN_CMD_CODE(_Read_CAM) , /*10*/
GEN_CMD_CODE(_Write_CAM) ,
GEN_CMD_CODE(_setBCNITV),
GEN_CMD_CODE(_setMBIDCFG),
GEN_CMD_CODE(_JoinBss), /*14*/
GEN_CMD_CODE(_DisConnect) , /*15*/
GEN_CMD_CODE(_CreateBss) ,
GEN_CMD_CODE(_SetOpMode) ,
GEN_CMD_CODE(_SiteSurvey), /*18*/
GEN_CMD_CODE(_SetAuth) ,
GEN_CMD_CODE(_SetKey) , /*20*/
GEN_CMD_CODE(_SetStaKey) ,
GEN_CMD_CODE(_SetAssocSta) ,
GEN_CMD_CODE(_DelAssocSta) ,
GEN_CMD_CODE(_SetStaPwrState) ,
GEN_CMD_CODE(_SetBasicRate) , /*25*/
GEN_CMD_CODE(_GetBasicRate) ,
GEN_CMD_CODE(_SetDataRate) ,
GEN_CMD_CODE(_GetDataRate) ,
GEN_CMD_CODE(_SetPhyInfo) ,
GEN_CMD_CODE(_GetPhyInfo) , /*30*/
GEN_CMD_CODE(_SetPhy) ,
GEN_CMD_CODE(_GetPhy) ,
GEN_CMD_CODE(_readRssi) ,
GEN_CMD_CODE(_readGain) ,
GEN_CMD_CODE(_SetAtim) , /*35*/
GEN_CMD_CODE(_SetPwrMode) ,
GEN_CMD_CODE(_JoinbssRpt),
GEN_CMD_CODE(_SetRaTable) ,
GEN_CMD_CODE(_GetRaTable) ,
GEN_CMD_CODE(_GetCCXReport), /*40*/
GEN_CMD_CODE(_GetDTMReport),
GEN_CMD_CODE(_GetTXRateStatistics),
GEN_CMD_CODE(_SetUsbSuspend),
GEN_CMD_CODE(_SetH2cLbk),
GEN_CMD_CODE(_AddBAReq) , /*45*/
GEN_CMD_CODE(_SetChannel), /*46*/
GEN_CMD_CODE(_SetTxPower),
GEN_CMD_CODE(_SwitchAntenna),
GEN_CMD_CODE(_SetCrystalCap),
GEN_CMD_CODE(_SetSingleCarrierTx), /*50*/
GEN_CMD_CODE(_SetSingleToneTx),/*51*/
GEN_CMD_CODE(_SetCarrierSuppressionTx),
GEN_CMD_CODE(_SetContinuousTx),
GEN_CMD_CODE(_SwitchBandwidth), /*54*/
GEN_CMD_CODE(_TX_Beacon), /*55*/
GEN_CMD_CODE(_Set_MLME_EVT), /*56*/
GEN_CMD_CODE(_Set_Drv_Extra), /*57*/
GEN_CMD_CODE(_Set_H2C_MSG), /*58*/
GEN_CMD_CODE(_SetChannelPlan), /*59*/
GEN_CMD_CODE(_LedBlink), /*60*/
GEN_CMD_CODE(_SetChannelSwitch), /*61*/
GEN_CMD_CODE(_TDLS), /*62*/
MAX_H2CCMD
};
#define _GetBBReg_CMD_ _Read_BBREG_CMD_
#define _SetBBReg_CMD_ _Write_BBREG_CMD_
#define _GetRFReg_CMD_ _Read_RFREG_CMD_
#define _SetRFReg_CMD_ _Write_RFREG_CMD_
#ifdef _RTW_CMD_C_
static struct _cmd_callback rtw_cmd_callback[] =
{
{GEN_CMD_CODE(_Read_MACREG), NULL}, /*0*/
{GEN_CMD_CODE(_Write_MACREG), NULL},
{GEN_CMD_CODE(_Read_BBREG), &rtw_getbbrfreg_cmdrsp_callback},
{GEN_CMD_CODE(_Write_BBREG), NULL},
{GEN_CMD_CODE(_Read_RFREG), &rtw_getbbrfreg_cmdrsp_callback},
{GEN_CMD_CODE(_Write_RFREG), NULL}, /*5*/
{GEN_CMD_CODE(_Read_EEPROM), NULL},
{GEN_CMD_CODE(_Write_EEPROM), NULL},
{GEN_CMD_CODE(_Read_EFUSE), NULL},
{GEN_CMD_CODE(_Write_EFUSE), NULL},
{GEN_CMD_CODE(_Read_CAM), NULL}, /*10*/
{GEN_CMD_CODE(_Write_CAM), NULL},
{GEN_CMD_CODE(_setBCNITV), NULL},
{GEN_CMD_CODE(_setMBIDCFG), NULL},
{GEN_CMD_CODE(_JoinBss), &rtw_joinbss_cmd_callback}, /*14*/
{GEN_CMD_CODE(_DisConnect), &rtw_disassoc_cmd_callback}, /*15*/
{GEN_CMD_CODE(_CreateBss), &rtw_createbss_cmd_callback},
{GEN_CMD_CODE(_SetOpMode), NULL},
{GEN_CMD_CODE(_SiteSurvey), &rtw_survey_cmd_callback}, /*18*/
{GEN_CMD_CODE(_SetAuth), NULL},
{GEN_CMD_CODE(_SetKey), NULL}, /*20*/
{GEN_CMD_CODE(_SetStaKey), &rtw_setstaKey_cmdrsp_callback},
{GEN_CMD_CODE(_SetAssocSta), &rtw_setassocsta_cmdrsp_callback},
{GEN_CMD_CODE(_DelAssocSta), NULL},
{GEN_CMD_CODE(_SetStaPwrState), NULL},
{GEN_CMD_CODE(_SetBasicRate), NULL}, /*25*/
{GEN_CMD_CODE(_GetBasicRate), NULL},
{GEN_CMD_CODE(_SetDataRate), NULL},
{GEN_CMD_CODE(_GetDataRate), NULL},
{GEN_CMD_CODE(_SetPhyInfo), NULL},
{GEN_CMD_CODE(_GetPhyInfo), NULL}, /*30*/
{GEN_CMD_CODE(_SetPhy), NULL},
{GEN_CMD_CODE(_GetPhy), NULL},
{GEN_CMD_CODE(_readRssi), NULL},
{GEN_CMD_CODE(_readGain), NULL},
{GEN_CMD_CODE(_SetAtim), NULL}, /*35*/
{GEN_CMD_CODE(_SetPwrMode), NULL},
{GEN_CMD_CODE(_JoinbssRpt), NULL},
{GEN_CMD_CODE(_SetRaTable), NULL},
{GEN_CMD_CODE(_GetRaTable) , NULL},
{GEN_CMD_CODE(_GetCCXReport), NULL}, /*40*/
{GEN_CMD_CODE(_GetDTMReport), NULL},
{GEN_CMD_CODE(_GetTXRateStatistics), NULL},
{GEN_CMD_CODE(_SetUsbSuspend), NULL},
{GEN_CMD_CODE(_SetH2cLbk), NULL},
{GEN_CMD_CODE(_AddBAReq), NULL}, /*45*/
{GEN_CMD_CODE(_SetChannel), NULL}, /*46*/
{GEN_CMD_CODE(_SetTxPower), NULL},
{GEN_CMD_CODE(_SwitchAntenna), NULL},
{GEN_CMD_CODE(_SetCrystalCap), NULL},
{GEN_CMD_CODE(_SetSingleCarrierTx), NULL}, /*50*/
{GEN_CMD_CODE(_SetSingleToneTx), NULL}, /*51*/
{GEN_CMD_CODE(_SetCarrierSuppressionTx), NULL},
{GEN_CMD_CODE(_SetContinuousTx), NULL},
{GEN_CMD_CODE(_SwitchBandwidth), NULL}, /*54*/
{GEN_CMD_CODE(_TX_Beacon), NULL},/*55*/
{GEN_CMD_CODE(_Set_MLME_EVT), NULL},/*56*/
{GEN_CMD_CODE(_Set_Drv_Extra), NULL},/*57*/
{GEN_CMD_CODE(_Set_H2C_MSG), NULL},/*58*/
{GEN_CMD_CODE(_SetChannelPlan), NULL},/*59*/
{GEN_CMD_CODE(_LedBlink), NULL},/*60*/
{GEN_CMD_CODE(_SetChannelSwitch), NULL},/*61*/
{GEN_CMD_CODE(_TDLS), NULL},/*62*/
};
#endif
#endif // _CMD_H_
Reference in a new issue View git blame Copy permalink