skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-26 06:23:38 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/hal/odm.h
Larry Finger f8ec1962dd rtl8188eu: Remove "enum ODM_RF_RADIO_PATH" and ODM_RF_PATH_x 
These are already expressed as "enum rf_radio_path" and RF_PATH_x. Having
two definitions is ridiculous.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2016-02-14 20:14:42 -06:00

1525 lines
38 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef __HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__
/* */
/* Definition */
/* */
/* */
/* 2011/09/22 MH Define all team supprt ability. */
/* */
/* */
/* 2011/09/22 MH Define for all teams. Please Define the constan in your precomp header. */
/* */
/* define DM_ODM_SUPPORT_AP 0 */
/* define DM_ODM_SUPPORT_ADSL 0 */
/* define DM_ODM_SUPPORT_CE 0 */
/* define DM_ODM_SUPPORT_MP 1 */
/* */
/* 2011/09/28 MH Define ODM SW team support flag. */
/* */
/* */
/* Antenna Switch Relative Definition. */
/* */
/* */
/* 20100503 Joseph: */
/* Add new function SwAntDivCheck8192C(). */
/* This is the main function of Antenna diversity function before link. */
/* Mainly, it just retains last scan result and scan again. */
/* After that, it compares the scan result to see which one gets better RSSI. */
/* It selects antenna with better receiving power and returns better scan result. */
/* */
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
/* */
/* 3 Tx Power Tracking */
/* 3============================================================ */
#define DPK_DELTA_MAPPING_NUM 13
#define index_mapping_HP_NUM 15
/* */
/* 3 PSD Handler */
/* 3============================================================ */
#define AFH_PSD 1 /* 0:normal PSD scan, 1: only do 20 pts PSD */
#define MODE_40M 0 /* 0:20M, 1:40M */
#define PSD_TH2 3
#define PSD_CHMIN 20 /* Minimum channel number for BT AFH */
#define SIR_STEP_SIZE 3
#define Smooth_Size_1 5
#define Smooth_TH_1 3
#define Smooth_Size_2 10
#define Smooth_TH_2 4
#define Smooth_Size_3 20
#define Smooth_TH_3 4
#define Smooth_Step_Size 5
#define Adaptive_SIR 1
#define PSD_RESCAN 4
#define PSD_SCAN_INTERVAL 700 /* ms */
/* 8723A High Power IGI Setting */
#define DM_DIG_HIGH_PWR_IGI_LOWER_BOUND 0x22
#define DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
#define DM_DIG_HIGH_PWR_THRESHOLD 0x3a
#define DM_DIG_LOW_PWR_THRESHOLD 0x14
/* ANT Test */
#define ANTTESTALL 0x00 /* Ant A or B will be Testing */
#define ANTTESTA 0x01 /* Ant A will be Testing */
#define ANTTESTB 0x02 /* Ant B will be testing */
/* LPS define */
#define DM_DIG_FA_TH0_LPS 4 /* 4 in lps */
#define DM_DIG_FA_TH1_LPS 15 /* 15 lps */
#define DM_DIG_FA_TH2_LPS 30 /* 30 lps */
#define RSSI_OFFSET_DIG 0x05;
/* ANT Test */
#define ANTTESTALL 0x00 /* Ant A or B will be Testing */
#define ANTTESTA 0x01 /* Ant A will be Testing */
#define ANTTESTB 0x02 /* Ant B will be testing */
/* */
/* structure and define */
/* */
/* */
/* 2011/09/20 MH Add for AP/ADSLpseudo DM structuer requirement. */
/* We need to remove to other position??? */
/* */
typedef struct rtl8192cd_priv {
u8 temp;
}rtl8192cd_priv, *prtl8192cd_priv;
typedef struct _Dynamic_Initial_Gain_Threshold_
{
u8 Dig_Enable_Flag;
u8 Dig_Ext_Port_Stage;
int RssiLowThresh;
int RssiHighThresh;
u32 FALowThresh;
u32 FAHighThresh;
u8 CurSTAConnectState;
u8 PreSTAConnectState;
u8 CurMultiSTAConnectState;
u8 PreIGValue;
u8 CurIGValue;
u8 BT30_CurIGI;
u8 BackupIGValue;
s8 BackoffVal;
s8 BackoffVal_range_max;
s8 BackoffVal_range_min;
u8 rx_gain_range_max;
u8 rx_gain_range_min;
u8 Rssi_val_min;
u8 PreCCK_CCAThres;
u8 CurCCK_CCAThres;
u8 PreCCKPDState;
u8 CurCCKPDState;
u8 LargeFAHit;
u8 ForbiddenIGI;
u32 Recover_cnt;
u8 DIG_Dynamic_MIN_0;
u8 DIG_Dynamic_MIN_1;
bool bMediaConnect_0;
bool bMediaConnect_1;
u32 AntDiv_RSSI_max;
u32 RSSI_max;
}DIG_T,*pDIG_T;
typedef struct _Dynamic_Power_Saving_
{
u8 PreCCAState;
u8 CurCCAState;
u8 PreRFState;
u8 CurRFState;
int Rssi_val_min;
u8 initialize;
u32 Reg874,RegC70,Reg85C,RegA74;
}PS_T,*pPS_T;
typedef struct false_ALARM_STATISTICS{
u32 Cnt_Parity_Fail;
u32 Cnt_Rate_Illegal;
u32 Cnt_Crc8_fail;
u32 Cnt_Mcs_fail;
u32 Cnt_Ofdm_fail;
u32 Cnt_Cck_fail;
u32 Cnt_all;
u32 Cnt_Fast_Fsync;
u32 Cnt_SB_Search_fail;
u32 Cnt_OFDM_CCA;
u32 Cnt_CCK_CCA;
u32 Cnt_CCA_all;
u32 Cnt_BW_USC; /* Gary */
u32 Cnt_BW_LSC; /* Gary */
}false_ALARM_STATISTICS, *Pfalse_ALARM_STATISTICS;
typedef struct _Dynamic_Primary_CCA{
u8 PriCCA_flag;
u8 intf_flag;
u8 intf_type;
u8 DupRTS_flag;
u8 Monitor_flag;
}Pri_CCA_T, *pPri_CCA_T;
typedef struct _RX_High_Power_
{
u8 RXHP_flag;
u8 PSD_func_trigger;
u8 PSD_bitmap_RXHP[80];
u8 Pre_IGI;
u8 Cur_IGI;
u8 Pre_pw_th;
u8 Cur_pw_th;
bool First_time_enter;
bool RXHP_enable;
u8 TP_Mode;
RT_TIMER PSDTimer;
}RXHP_T, *pRXHP_T;
#define ASSOCIATE_ENTRY_NUM 32 /* Max size of AsocEntry[]. */
#define ODM_ASSOCIATE_ENTRY_NUM ASSOCIATE_ENTRY_NUM
/* This indicates two different the steps. */
/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. */
/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK */
/* with original RSSI to determine if it is necessary to switch antenna. */
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
#define TP_MODE 0
#define RSSI_MODE 1
#define TRAFFIC_LOW 0
#define TRAFFIC_HIGH 1
typedef struct _SW_Antenna_Switch_
{
u8 try_flag;
s32 PreRSSI;
u8 CurAntenna;
u8 PreAntenna;
u8 RSSI_Trying;
u8 TestMode;
u8 bTriggerAntennaSwitch;
u8 SelectAntennaMap;
u8 RSSI_target;
/* Before link Antenna Switch check */
u8 SWAS_NoLink_State;
u32 SWAS_NoLink_BK_Reg860;
bool ANTA_ON; /* To indicate Ant A is or not */
bool ANTB_ON; /* To indicate Ant B is on or not */
s32 RSSI_sum_A;
s32 RSSI_sum_B;
s32 RSSI_cnt_A;
s32 RSSI_cnt_B;
u64 lastTxOkCnt;
u64 lastRxOkCnt;
u64 TXByteCnt_A;
u64 TXByteCnt_B;
u64 RXByteCnt_A;
u64 RXByteCnt_B;
u8 TrafficLoad;
RT_TIMER SwAntennaSwitchTimer;
/* Hybrid Antenna Diversity */
u32 CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
u32 CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
u32 OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
u32 OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
u32 RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM];
u32 RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM];
u8 TxAnt[ASSOCIATE_ENTRY_NUM];
u8 TargetSTA;
u8 antsel;
u8 RxIdleAnt;
}SWAT_T, *pSWAT_T;
typedef struct _EDCA_TURBO_ {
bool bCurrentTurboEDCA;
bool bIsCurRDLState;
u32 prv_traffic_idx; /* edca turbo */
}EDCA_T,*pEDCA_T;
typedef struct _ODM_RATE_ADAPTIVE
{
u8 Type; /* DM_Type_ByFW/DM_Type_ByDriver */
u8 HighRSSIThresh; /* if RSSI > HighRSSIThresh => RATRState is DM_RATR_STA_HIGH */
u8 LowRSSIThresh; /* if RSSI <= LowRSSIThresh => RATRState is DM_RATR_STA_LOW */
u8 RATRState; /* Current RSSI level, DM_RATR_STA_HIGH/DM_RATR_STA_MIDDLE/DM_RATR_STA_LOW */
u32 LastRATR; /* RATR Register Content */
} ODM_RATE_ADAPTIVE, *PODM_RATE_ADAPTIVE;
#define IQK_MAC_REG_NUM 4
#define IQK_ADDA_REG_NUM 16
#define IQK_BB_REG_NUM_MAX 10
#define IQK_BB_REG_NUM 9
#define HP_THERMAL_NUM 8
#define AVG_THERMAL_NUM 8
#define IQK_Matrix_REG_NUM 8
#define IQK_Matrix_Settings_NUM 1+24+21
#define DM_Type_ByFW 0
#define DM_Type_ByDriver 1
/* */
/* Declare for common info */
/* */
/* Declare for common info */
/* */
#define MAX_PATH_NUM_92CS 2
typedef struct _ODM_Phy_Status_Info_
{
u8 RxPWDBAll;
u8 SignalQuality; /* in 0-100 index. */
u8 RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; /* EVM */
u8 RxMIMOSignalStrength[MAX_PATH_NUM_92CS];/* in 0~100 index */
s8 RxPower; /* in dBm Translate from PWdB */
s8 RecvSignalPower;/* Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures. */
u8 BTRxRSSIPercentage;
u8 SignalStrength; /* in 0-100 index. */
u8 RxPwr[MAX_PATH_NUM_92CS];/* per-path's pwdb */
u8 RxSNR[MAX_PATH_NUM_92CS];/* per-path's SNR */
}ODM_PHY_INFO_T,*PODM_PHY_INFO_T;
typedef struct _ODM_Phy_Dbg_Info_
{
/* ODM Write,debug info */
s8 RxSNRdB[MAX_PATH_NUM_92CS];
u64 NumQryPhyStatus;
u64 NumQryPhyStatusCCK;
u64 NumQryPhyStatusOFDM;
u8 NumQryBeaconPkt;
/* Others */
s32 RxEVM[MAX_PATH_NUM_92CS];
}ODM_PHY_DBG_INFO_T;
typedef struct _ODM_Per_Pkt_Info_
{
u8 Rate;
u8 StationID;
bool bPacketMatchBSSID;
bool bPacketToSelf;
bool bPacketBeacon;
}ODM_PACKET_INFO_T,*PODM_PACKET_INFO_T;
typedef struct _ODM_Mac_Status_Info_
{
u8 test;
}ODM_MAC_INFO;
typedef enum tag_Dynamic_ODM_Support_Ability_Type
{
/* BB Team */
ODM_DIG = 0x00000001,
ODM_HIGH_POWER = 0x00000002,
ODM_CCK_CCA_TH = 0x00000004,
ODM_FA_STATISTICS = 0x00000008,
ODM_RAMASK = 0x00000010,
ODM_RSSI_MONITOR = 0x00000020,
ODM_SW_ANTDIV = 0x00000040,
ODM_HW_ANTDIV = 0x00000080,
ODM_BB_PWRSV = 0x00000100,
ODM_2TPATHDIV = 0x00000200,
ODM_1TPATHDIV = 0x00000400,
ODM_PSD2AFH = 0x00000800
}ODM_Ability_E;
/* */
/* 2011/20/20 MH For MP driver RT_WLAN_STA = STA_INFO_T */
/* Please declare below ODM relative info in your STA info structure. */
/* */
typedef struct _ODM_STA_INFO{
/* Driver Write */
bool bUsed; /* record the sta status link or not? */
u8 IOTPeer; /* Enum value. HT_IOT_PEER_E */
/* ODM Write */
/* 1 PHY_STATUS_INFO */
u8 RSSI_Path[4]; /* */
u8 RSSI_Ave;
u8 RXEVM[4];
u8 RXSNR[4];
} ODM_STA_INFO_T, *PODM_STA_INFO_T;
/* */
/* 2011/10/20 MH Define Common info enum for all team. */
/* */
typedef enum _ODM_Common_Info_Definition
{
/* REMOVED CASE----------- */
/* ODM_CMNINFO_CCK_HP, */
/* ODM_CMNINFO_RFPATH_ENABLE, Define as ODM write??? */
/* ODM_CMNINFO_BT_COEXIST, ODM_BT_COEXIST_E */
/* ODM_CMNINFO_OP_MODE, ODM_OPERATION_MODE_E */
/* REMOVED CASE----------- */
/* */
/* Fixed value: */
/* */
/* HOOK BEFORE REG INIT----------- */
ODM_CMNINFO_PLATFORM = 0,
ODM_CMNINFO_ABILITY, /* ODM_ABILITY_E */
ODM_CMNINFO_INTERFACE, /* ODM_INTERFACE_E */
ODM_CMNINFO_MP_TEST_CHIP,
ODM_CMNINFO_IC_TYPE, /* ODM_IC_TYPE_E */
ODM_CMNINFO_CUT_VER, /* ODM_CUT_VERSION_E */
ODM_CMNINFO_FAB_VER, /* ODM_FAB_E */
ODM_CMNINFO_RF_TYPE, /* ODM_RF_PATH_E or ODM_RF_TYPE_E? */
ODM_CMNINFO_BOARD_TYPE, /* ODM_BOARD_TYPE_E */
ODM_CMNINFO_EXT_LNA, /* true */
ODM_CMNINFO_EXT_PA,
ODM_CMNINFO_EXT_TRSW,
ODM_CMNINFO_PATCH_ID, /* CUSTOMER ID */
ODM_CMNINFO_BINHCT_TEST,
ODM_CMNINFO_BWIFI_TEST,
ODM_CMNINFO_SMART_CONCURRENT,
/* HOOK BEFORE REG INIT----------- */
/* */
/* Dynamic value: */
/* */
/* POINTER REFERENCE----------- */
ODM_CMNINFO_MAC_PHY_MODE, /* ODM_MAC_PHY_MODE_E */
ODM_CMNINFO_TX_UNI,
ODM_CMNINFO_RX_UNI,
ODM_CMNINFO_WM_MODE, /* ODM_WIRELESS_MODE_E */
ODM_CMNINFO_BAND, /* ODM_BAND_TYPE_E */
ODM_CMNINFO_SEC_CHNL_OFFSET, /* ODM_SEC_CHNL_OFFSET_E */
ODM_CMNINFO_SEC_MODE, /* ODM_SECURITY_E */
ODM_CMNINFO_BW, /* ODM_BW_E */
ODM_CMNINFO_CHNL,
ODM_CMNINFO_DMSP_GET_VALUE,
ODM_CMNINFO_BUDDY_ADAPTOR,
ODM_CMNINFO_DMSP_IS_MASTER,
ODM_CMNINFO_SCAN,
ODM_CMNINFO_POWER_SAVING,
ODM_CMNINFO_ONE_PATH_CCA, /* ODM_CCA_PATH_E */
ODM_CMNINFO_DRV_STOP,
ODM_CMNINFO_PNP_IN,
ODM_CMNINFO_INIT_ON,
ODM_CMNINFO_ANT_TEST,
ODM_CMNINFO_NET_CLOSED,
ODM_CMNINFO_MP_MODE,
/* POINTER REFERENCE----------- */
/* CALL BY VALUE------------- */
ODM_CMNINFO_WIFI_DIRECT,
ODM_CMNINFO_WIFI_DISPLAY,
ODM_CMNINFO_LINK,
ODM_CMNINFO_RSSI_MIN,
ODM_CMNINFO_DBG_COMP, /* u64 */
ODM_CMNINFO_DBG_LEVEL, /* u32 */
ODM_CMNINFO_RA_THRESHOLD_HIGH, /* u8 */
ODM_CMNINFO_RA_THRESHOLD_LOW, /* u8 */
ODM_CMNINFO_RF_ANTENNA_TYPE, /* u8 */
ODM_CMNINFO_BT_DISABLED,
ODM_CMNINFO_BT_OPERATION,
ODM_CMNINFO_BT_DIG,
ODM_CMNINFO_BT_BUSY, /* Check Bt is using or not */
ODM_CMNINFO_BT_DISABLE_EDCA,
ODM_CMNINFO_STATION_STATE,
/* CALL BY VALUE------------- */
/* */
/* Dynamic ptr array hook itms. */
/* */
ODM_CMNINFO_STA_STATUS,
ODM_CMNINFO_PHY_STATUS,
ODM_CMNINFO_MAC_STATUS,
ODM_CMNINFO_MAX,
}ODM_CMNINFO_E;
/* */
/* 2011/10/20 MH Define ODM support ability. ODM_CMNINFO_ABILITY */
/* */
typedef enum _ODM_Support_Ability_Definition
{
/* */
/* BB ODM section BIT 0-15 */
/* */
ODM_BB_DIG = BIT0,
ODM_BB_RA_MASK = BIT1,
ODM_BB_DYNAMIC_TXPWR = BIT2,
ODM_BB_FA_CNT = BIT3,
ODM_BB_RSSI_MONITOR = BIT4,
ODM_BB_CCK_PD = BIT5,
ODM_BB_ANT_DIV = BIT6,
ODM_BB_PWR_SAVE = BIT7,
ODM_BB_PWR_TRAIN = BIT8,
ODM_BB_RATE_ADAPTIVE = BIT9,
ODM_BB_PATH_DIV = BIT10,
ODM_BB_PSD = BIT11,
ODM_BB_RXHP = BIT12,
ODM_BB_ADAPTIVITY = BIT13,
ODM_BB_DYNAMIC_ATC = BIT14,
/* */
/* MAC DM section BIT 16-23 */
/* */
ODM_MAC_EDCA_TURBO = BIT16,
ODM_MAC_EARLY_MODE = BIT17,
/* */
/* RF ODM section BIT 24-31 */
/* */
ODM_RF_TX_PWR_TRACK = BIT24,
ODM_RF_RX_GAIN_TRACK = BIT25,
ODM_RF_CALIBRATION = BIT26,
}ODM_ABILITY_E;
/* ODM_CMNINFO_INTERFACE */
typedef enum tag_ODM_Support_Interface_Definition
{
ODM_ITRF_PCIE = 0x1,
ODM_ITRF_USB = 0x2,
ODM_ITRF_SDIO = 0x4,
ODM_ITRF_ALL = 0x7,
}ODM_INTERFACE_E;
/* ODM_CMNINFO_IC_TYPE */
typedef enum tag_ODM_Support_IC_Type_Definition
{
ODM_RTL8192S = BIT0,
ODM_RTL8192C = BIT1,
ODM_RTL8192D = BIT2,
ODM_RTL8723A = BIT3,
ODM_RTL8188E = BIT4,
ODM_RTL8812 = BIT5,
ODM_RTL8821 = BIT6,
ODM_RTL8192E = BIT7,
ODM_RTL8723B = BIT8,
ODM_RTL8813A = BIT9,
ODM_RTL8881A = BIT10
}ODM_IC_TYPE_E;
#define ODM_IC_11N_SERIES (ODM_RTL8192S|ODM_RTL8192C|ODM_RTL8192D|ODM_RTL8723A|ODM_RTL8188E)
#define ODM_IC_11AC_SERIES (ODM_RTL8812)
/* ODM_CMNINFO_CUT_VER */
typedef enum tag_ODM_Cut_Version_Definition
{
ODM_CUT_A = 1,
ODM_CUT_B = 2,
ODM_CUT_C = 3,
ODM_CUT_D = 4,
ODM_CUT_E = 5,
ODM_CUT_F = 6,
ODM_CUT_TEST = 7,
}ODM_CUT_VERSION_E;
/* ODM_CMNINFO_FAB_VER */
typedef enum tag_ODM_Fab_Version_Definition
{
ODM_TSMC = 0,
ODM_UMC = 1,
}ODM_FAB_E;
/* ODM_CMNINFO_RF_TYPE */
/* */
/* For example 1T2R (A+AB = BIT0|BIT4|BIT5) */
/* */
typedef enum tag_ODM_RF_Path_Bit_Definition
{
ODM_RF_TX_A = BIT0,
ODM_RF_TX_B = BIT1,
ODM_RF_TX_C = BIT2,
ODM_RF_TX_D = BIT3,
ODM_RF_RX_A = BIT4,
ODM_RF_RX_B = BIT5,
ODM_RF_RX_C = BIT6,
ODM_RF_RX_D = BIT7,
}ODM_RF_PATH_E;
typedef enum tag_ODM_RF_Type_Definition
{
ODM_1T1R = 0,
ODM_1T2R = 1,
ODM_2T2R = 2,
ODM_2T3R = 3,
ODM_2T4R = 4,
ODM_3T3R = 5,
ODM_3T4R = 6,
ODM_4T4R = 7,
}ODM_RF_TYPE_E;
/* */
/* ODM Dynamic common info value definition */
/* */
/* typedef enum _MACPHY_MODE_8192D{ */
/* SINGLEMAC_SINGLEPHY, */
/* DUALMAC_DUALPHY, */
/* DUALMAC_SINGLEPHY, */
/* MACPHY_MODE_8192D,*PMACPHY_MODE_8192D; */
/* Above is the original define in MP driver. Please use the same define. THX. */
typedef enum tag_ODM_MAC_PHY_Mode_Definition
{
ODM_SMSP = 0,
ODM_DMSP = 1,
ODM_DMDP = 2,
}ODM_MAC_PHY_MODE_E;
typedef enum tag_BT_Coexist_Definition
{
ODM_BT_BUSY = 1,
ODM_BT_ON = 2,
ODM_BT_OFF = 3,
ODM_BT_NONE = 4,
}ODM_BT_COEXIST_E;
/* ODM_CMNINFO_OP_MODE */
typedef enum tag_Operation_Mode_Definition
{
ODM_NO_LINK = BIT0,
ODM_LINK = BIT1,
ODM_SCAN = BIT2,
ODM_POWERSAVE = BIT3,
ODM_AP_MODE = BIT4,
ODM_CLIENT_MODE = BIT5,
ODM_AD_HOC = BIT6,
ODM_WIFI_DIRECT = BIT7,
ODM_WIFI_DISPLAY = BIT8,
}ODM_OPERATION_MODE_E;
/* ODM_CMNINFO_WM_MODE */
typedef enum tag_Wireless_Mode_Definition
{
ODM_WM_UNKNOW = 0x0,
ODM_WM_B = BIT0,
ODM_WM_G = BIT1,
ODM_WM_A = BIT2,
ODM_WM_N24G = BIT3,
ODM_WM_N5G = BIT4,
ODM_WM_AUTO = BIT5,
ODM_WM_AC = BIT6,
}ODM_WIRELESS_MODE_E;
/* ODM_CMNINFO_BAND */
typedef enum tag_Band_Type_Definition
{
ODM_BAND_2_4G = BIT0,
ODM_BAND_5G = BIT1,
}ODM_BAND_TYPE_E;
/* ODM_CMNINFO_SEC_CHNL_OFFSET */
typedef enum tag_Secondary_Channel_Offset_Definition
{
ODM_DONT_CARE = 0,
ODM_BELOW = 1,
ODM_ABOVE = 2
}ODM_SEC_CHNL_OFFSET_E;
/* ODM_CMNINFO_SEC_MODE */
typedef enum tag_Security_Definition
{
ODM_SEC_OPEN = 0,
ODM_SEC_WEP40 = 1,
ODM_SEC_TKIP = 2,
ODM_SEC_RESERVE = 3,
ODM_SEC_AESCCMP = 4,
ODM_SEC_WEP104 = 5,
ODM_WEP_WPA_MIXED = 6, /* WEP + WPA */
ODM_SEC_SMS4 = 7,
}ODM_SECURITY_E;
/* ODM_CMNINFO_BW */
typedef enum tag_Bandwidth_Definition
{
ODM_BW20M = 0,
ODM_BW40M = 1,
ODM_BW80M = 2,
ODM_BW160M = 3,
ODM_BW10M = 4,
}ODM_BW_E;
/* ODM_CMNINFO_CHNL */
/* ODM_CMNINFO_BOARD_TYPE */
typedef enum tag_Board_Definition
{
ODM_BOARD_DEFAULT = 0, /* The DEFAULT case. */
ODM_BOARD_MINICARD = BIT(0), /* 0 = non-mini card, 1= mini card. */
ODM_BOARD_SLIM = BIT(1), /* 0 = non-slim card, 1 = slim card */
ODM_BOARD_BT = BIT(2), /* 0 = without BT card, 1 = with BT */
ODM_BOARD_EXT_PA = BIT(3), /* 0 = no 2G ext-PA, 1 = existing 2G ext-PA */
ODM_BOARD_EXT_LNA = BIT(4), /* 0 = no 2G ext-LNA, 1 = existing 2G ext-LNA */
ODM_BOARD_EXT_TRSW = BIT(5), /* 0 = no ext-TRSW, 1 = existing ext-TRSW */
ODM_BOARD_EXT_PA_5G = BIT(6), /* 0 = no 5G ext-PA, 1 = existing 5G ext-PA */
ODM_BOARD_EXT_LNA_5G = BIT(7), /* 0 = no 5G ext-LNA, 1 = existing 5G ext-LNA */
}ODM_BOARD_TYPE_E;
/* ODM_CMNINFO_ONE_PATH_CCA */
typedef enum tag_CCA_Path
{
ODM_CCA_2R = 0,
ODM_CCA_1R_A = 1,
ODM_CCA_1R_B = 2,
}ODM_CCA_PATH_E;
typedef struct _ODM_RA_Info_
{
u8 RateID;
u32 RateMask;
u32 RAUseRate;
u8 RateSGI;
u8 RssiStaRA;
u8 PreRssiStaRA;
u8 SGIEnable;
u8 DecisionRate;
u8 PreRate;
u8 HighestRate;
u8 LowestRate;
u32 NscUp;
u32 NscDown;
u16 RTY[5];
u32 TOTAL;
u16 DROP;/* Retry over or drop */
u16 DROP1;/* LifeTime over */
u8 Active;
u16 RptTime;
u8 RAWaitingCounter;
u8 RAPendingCounter;
u8 PTActive; /* on or off */
u8 PTTryState; /* 0 trying state, 1 for decision state */
u8 PTStage; /* 0~6 */
u8 PTStopCount; /* Stop PT counter */
u8 PTPreRate; /* if rate change do PT */
u8 PTPreRssi; /* if RSSI change 5% do PT */
u8 PTModeSS; /* decide whitch rate should do PT */
u8 RAstage; /* StageRA, decide how many times RA will be done between PT */
u8 PTSmoothFactor;
} ODM_RA_INFO_T,*PODM_RA_INFO_T;
typedef struct _IQK_MATRIX_REGS_SETTING{
bool bIQKDone;
s32 Value[1][IQK_Matrix_REG_NUM];
}IQK_MATRIX_REGS_SETTING,*PIQK_MATRIX_REGS_SETTING;
typedef struct ODM_RF_Calibration_Structure
{
/* for tx power tracking */
u32 RegA24; /* for TempCCK */
s32 RegE94;
s32 RegE9C;
s32 RegEB4;
s32 RegEBC;
/* u8 bTXPowerTracking; */
u8 TXPowercount;
bool bTXPowerTrackingInit;
bool bTXPowerTracking;
u8 TxPowerTrackControl; /* for mp mode, turn off txpwrtracking as default */
u8 TM_Trigger;
u8 InternalPA5G[2]; /* pathA / pathB */
u8 ThermalMeter[2]; /* ThermalMeter, index 0 for RFIC0, and 1 for RFIC1 */
u8 ThermalValue;
u8 ThermalValue_LCK;
u8 ThermalValue_IQK;
u8 ThermalValue_DPK;
u8 ThermalValue_AVG[AVG_THERMAL_NUM];
u8 ThermalValue_AVG_index;
u8 ThermalValue_RxGain;
u8 ThermalValue_Crystal;
u8 ThermalValue_DPKstore;
u8 ThermalValue_DPKtrack;
bool TxPowerTrackingInProgress;
bool bDPKenable;
bool bReloadtxpowerindex;
u8 bRfPiEnable;
u32 TXPowerTrackingCallbackCnt; /* cosa add for debug */
u8 bCCKinCH14;
u8 CCK_index;
u8 OFDM_index[2];
bool bDoneTxpower;
s8 PowerIndexOffset;
s8 DeltaPowerIndex;
s8 DeltaPowerIndexLast;
bool bTxPowerChanged;
u8 ThermalValue_HP[HP_THERMAL_NUM];
u8 ThermalValue_HP_index;
IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];
u8 Delta_IQK;
u8 Delta_LCK;
/* for IQK */
u32 RegC04;
u32 Reg874;
u32 RegC08;
u32 RegB68;
u32 RegB6C;
u32 Reg870;
u32 Reg860;
u32 Reg864;
bool bIQKInitialized;
bool bLCKInProgress;
bool bAntennaDetected;
u32 ADDA_backup[IQK_ADDA_REG_NUM];
u32 IQK_MAC_backup[IQK_MAC_REG_NUM];
u32 IQK_BB_backup_recover[9];
u32 IQK_BB_backup[IQK_BB_REG_NUM];
/* for APK */
u32 APKoutput[2][2]; /* path A/B; output1_1a/output1_2a */
u8 bAPKdone;
u8 bAPKThermalMeterIgnore;
u8 bDPdone;
u8 bDPPathAOK;
u8 bDPPathBOK;
}ODM_RF_CAL_T,*PODM_RF_CAL_T;
/* */
/* ODM Dynamic common info value definition */
/* */
typedef struct _FAST_ANTENNA_TRAINNING_
{
u8 Bssid[6];
u8 antsel_rx_keep_0;
u8 antsel_rx_keep_1;
u8 antsel_rx_keep_2;
u32 antSumRSSI[7];
u32 antRSSIcnt[7];
u32 antAveRSSI[7];
u8 FAT_State;
u32 TrainIdx;
u8 antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
u8 antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
u8 antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
u32 MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
u32 AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
u32 MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
u32 AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
u8 RxIdleAnt;
bool bBecomeLinked;
}FAT_T,*pFAT_T;
typedef enum _FAT_STATE
{
FAT_NORMAL_STATE = 0,
FAT_TRAINING_STATE = 1,
}FAT_STATE_E, *PFAT_STATE_E;
typedef enum _ANT_DIV_TYPE
{
NO_ANTDIV = 0xFF,
CG_TRX_HW_ANTDIV = 0x01,
CGCS_RX_HW_ANTDIV = 0x02,
FIXED_HW_ANTDIV = 0x03,
CG_TRX_SMART_ANTDIV = 0x04,
CGCS_RX_SW_ANTDIV = 0x05,
}ANT_DIV_TYPE_E, *PANT_DIV_TYPE_E;
/* */
/* 2011/09/22 MH Copy from SD4 defined structure. We use to support PHY DM integration. */
/* */
typedef struct DM_Out_Source_Dynamic_Mechanism_Structure
{
/* RT_TIMER FastAntTrainingTimer; */
/* */
/* Add for different team use temporarily */
/* */
struct adapter * Adapter; /* For CE/NIC team */
prtl8192cd_priv priv; /* For AP/ADSL team */
/* WHen you use Adapter or priv pointer, you must make sure the pointer is ready. */
bool odm_ready;
rtl8192cd_priv fake_priv;
u64 DebugComponents;
u32 DebugLevel;
/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
bool bCckHighPower;
u8 RFPathRxEnable; /* ODM_CMNINFO_RFPATH_ENABLE */
u8 ControlChannel;
/* ODM HANDLE, DRIVER NEEDS NOT TO HOOK------ */
/* REMOVED COMMON INFO---------- */
/* u8 PseudoMacPhyMode; */
/* bool *BTCoexist; */
/* bool PseudoBtCoexist; */
/* u8 OPMode; */
/* bool bAPMode; */
/* bool bClientMode; */
/* bool bAdHocMode; */
/* bool bSlaveOfDMSP; */
/* REMOVED COMMON INFO---------- */
/* 1 COMMON INFORMATION */
/* */
/* Init Value */
/* */
/* HOOK BEFORE REG INIT----------- */
/* ODM Platform info AP/ADSL/CE/MP = 1/2/3/4 */
u8 SupportPlatform;
/* ODM Support Ability DIG/RATR/TX_PWR_TRACK/ <20>K<EFBFBD>K = 1/2/3/<2F>K */
u32 SupportAbility;
/* ODM PCIE/USB/SDIO/GSPI = 0/1/2/3 */
u8 SupportInterface;
/* ODM composite or independent. Bit oriented/ 92C+92D+ .... or any other type = 1/2/3/... */
u32 SupportICType;
/* Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/... */
u8 CutVersion;
/* Fab Version TSMC/UMC = 0/1 */
u8 FabVersion;
/* RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/... */
u8 RFType;
/* Board Type Normal/HighPower/MiniCard/SLIM/Combo/... = 0/1/2/3/4/... */
u8 BoardType;
/* with external LNA NO/Yes = 0/1 */
u8 ExtLNA;
/* with external PA NO/Yes = 0/1 */
u8 ExtPA;
/* with external TRSW NO/Yes = 0/1 */
u8 ExtTRSW;
u8 PatchID; /* Customer ID */
bool bInHctTest;
bool bWIFITest;
bool bDualMacSmartConcurrent;
u32 BK_SupportAbility;
u8 AntDivType;
/* HOOK BEFORE REG INIT----------- */
/* */
/* Dynamic Value */
/* */
/* POINTER REFERENCE----------- */
u8 u8_temp;
bool bool_temp;
struct adapter *_temp;
/* MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2 */
u8 *pMacPhyMode;
/* TX Unicast byte count */
u64 *pNumTxBytesUnicast;
/* RX Unicast byte count */
u64 *pNumRxBytesUnicast;
/* Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3 */
u8 *pWirelessMode; /* ODM_WIRELESS_MODE_E */
/* Frequence band 2.4G/5G = 0/1 */
u8 *pBandType;
/* Secondary channel offset don't_care/below/above = 0/1/2 */
u8 *pSecChOffset;
/* Security mode Open/WEP/AES/TKIP = 0/1/2/3 */
u8 *pSecurity;
/* BW info 20M/40M/80M = 0/1/2 */
u8 *pBandWidth;
/* Central channel location Ch1/Ch2/.... */
u8 *pChannel; /* central channel number */
/* Common info for 92D DMSP */
bool *pbGetValueFromOtherMac;
struct adapter * *pBuddyAdapter;
bool *pbMasterOfDMSP; /* MAC0: master, MAC1: slave */
/* Common info for Status */
bool *pbScanInProcess;
bool *pbPowerSaving;
/* CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E. */
u8 *pOnePathCCA;
/* pMgntInfo->AntennaTest */
u8 *pAntennaTest;
bool *pbNet_closed;
/* POINTER REFERENCE----------- */
/* */
/* CALL BY VALUE------------- */
bool bLinkInProcess;
bool bWIFI_Direct;
bool bWIFI_Display;
bool bLinked;
bool bsta_state;
u8 RSSI_Min;
u8 InterfaceIndex; /* Add for 92D dual MAC: 0--Mac0 1--Mac1 */
bool bIsMPChip;
bool bOneEntryOnly;
/* Common info for BTDM */
bool bBtDisabled; /* BT is disabled */
bool bBtConnectProcess; /* BT HS is under connection progress. */
u8 btHsRssi; /* BT HS mode wifi rssi value. */
bool bBtHsOperation; /* BT HS mode is under progress */
u8 btHsDigVal; /* use BT rssi to decide the DIG value */
bool bBtDisableEdcaTurbo; /* Under some condition, don't enable the EDCA Turbo */
bool bBtLimitedDig; /* BT is busy. */
/* CALL BY VALUE------------- */
u8 RSSI_A;
u8 RSSI_B;
u64 RSSI_TRSW;
u64 RSSI_TRSW_H;
u64 RSSI_TRSW_L;
u64 RSSI_TRSW_iso;
u8 RxRate;
bool StopDIG;
u8 TxRate;
u8 LinkedInterval;
u8 preChannel;
u32 TxagcOffsetValueA;
bool IsTxagcOffsetPositiveA;
u32 TxagcOffsetValueB;
bool IsTxagcOffsetPositiveB;
u64 lastTxOkCnt;
u64 lastRxOkCnt;
u32 BbSwingOffsetA;
bool IsBbSwingOffsetPositiveA;
u32 BbSwingOffsetB;
bool IsBbSwingOffsetPositiveB;
s8 TH_L2H_ini;
s8 TH_EDCCA_HL_diff;
u32 IGI_Base;
u32 IGI_target;
bool ForceEDCCA;
u8 AdapEn_RSSI;
u8 AntType;
u8 antdiv_rssi;
u8 antdiv_period;
u32 Force_TH_H;
u32 Force_TH_L;
u8 IGI_LowerBound;
/* 2 Define STA info. */
/* _ODM_STA_INFO */
/* 2012/01/12 MH For MP, we need to reduce one array pointer for default port.?? */
PSTA_INFO_T pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];
#if (RATE_ADAPTIVE_SUPPORT == 1)
u16 CurrminRptTime;
ODM_RA_INFO_T RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; /* Use MacID as array index. STA MacID=0, VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} */
#endif
/* */
/* 2012/02/14 MH Add to share 88E ra with other SW team. */
/* We need to colelct all support abilit to a proper area. */
/* */
bool RaSupport88E;
/* Define ........... */
/* Latest packet phy info (ODM write) */
ODM_PHY_DBG_INFO_T PhyDbgInfo;
/* PHY_INFO_88E PhyInfo; */
/* Latest packet phy info (ODM write) */
ODM_MAC_INFO *pMacInfo;
/* MAC_INFO_88E MacInfo; */
/* Different Team independt structure?? */
/* */
/* TX_RTP_CMN TX_retrpo; */
/* TX_RTP_88E TX_retrpo; */
/* TX_RTP_8195 TX_retrpo; */
/* */
/* ODM Structure */
/* */
FAT_T DM_FatTable;
DIG_T DM_DigTable;
PS_T DM_PSTable;
Pri_CCA_T DM_PriCCA;
RXHP_T DM_RXHP_Table;
false_ALARM_STATISTICS FalseAlmCnt;
false_ALARM_STATISTICS FlaseAlmCntBuddyAdapter;
SWAT_T DM_SWAT_Table;
bool RSSI_test;
EDCA_T DM_EDCA_Table;
u32 WMMEDCA_BE;
/* Copy from SD4 structure */
/* */
/* ================================================== */
/* */
bool *pbDriverStopped;
bool *pbDriverIsGoingToPnpSetPowerSleep;
bool *pinit_adpt_in_progress;
/* PSD */
bool bUserAssignLevel;
RT_TIMER PSDTimer;
u8 RSSI_BT; /* come from BT */
bool bPSDinProcess;
bool bDMInitialGainEnable;
/* for rate adaptive, in fact, 88c/92c fw will handle this */
u8 bUseRAMask;
ODM_RATE_ADAPTIVE RateAdaptive;
ODM_RF_CAL_T RFCalibrateInfo;
/* */
/* TX power tracking */
/* */
u8 BbSwingIdxOfdm;
u8 BbSwingIdxOfdmCurrent;
u8 BbSwingIdxOfdmBase;
bool BbSwingFlagOfdm;
u8 BbSwingIdxCck;
u8 BbSwingIdxCckCurrent;
u8 BbSwingIdxCckBase;
u8 DefaultOfdmIndex;
u8 DefaultCckIndex;
bool BbSwingFlagCck;
u8 *mp_mode;
/* */
/* ODM system resource. */
/* */
/* ODM relative time. */
RT_TIMER PathDivSwitchTimer;
/* 2011.09.27 add for Path Diversity */
RT_TIMER CCKPathDiversityTimer;
RT_TIMER FastAntTrainingTimer;
/* ODM relative workitem. */
} DM_ODM_T, *PDM_ODM_T; /* DM_Dynamic_Mechanism_Structure */
typedef enum _ODM_RF_CONTENT{
odm_radioa_txt = 0x1000,
odm_radiob_txt = 0x1001,
odm_radioc_txt = 0x1002,
odm_radiod_txt = 0x1003
} ODM_RF_CONTENT;
typedef enum _ODM_BB_Config_Type{
CONFIG_BB_PHY_REG,
CONFIG_BB_AGC_TAB,
CONFIG_BB_AGC_TAB_2G,
CONFIG_BB_AGC_TAB_5G,
CONFIG_BB_PHY_REG_PG,
} ODM_BB_Config_Type, *PODM_BB_Config_Type;
/* Status code */
typedef enum _RT_STATUS{
RT_STATUS_SUCCESS,
RT_STATUS_FAILURE,
RT_STATUS_PENDING,
RT_STATUS_RESOURCE,
RT_STATUS_INVALID_CONTEXT,
RT_STATUS_INVALID_PARAMETER,
RT_STATUS_NOT_SUPPORT,
RT_STATUS_OS_API_FAILED,
}RT_STATUS,*PRT_STATUS;
/* 3=========================================================== */
/* 3 DIG */
/* 3=========================================================== */
typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
{
DIG_TYPE_THRESH_HIGH = 0,
DIG_TYPE_THRESH_LOW = 1,
DIG_TYPE_BACKOFF = 2,
DIG_TYPE_RX_GAIN_MIN = 3,
DIG_TYPE_RX_GAIN_MAX = 4,
DIG_TYPE_ENABLE = 5,
DIG_TYPE_DISABLE = 6,
DIG_OP_TYPE_MAX
}DM_DIG_OP_E;
/*
typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
{
CCK_PD_STAGE_LowRssi = 0,
CCK_PD_STAGE_HighRssi = 1,
CCK_PD_STAGE_MAX = 3,
}DM_CCK_PDTH_E;
typedef enum tag_DIG_EXT_PORT_ALGO_Definition
{
DIG_EXT_PORT_STAGE_0 = 0,
DIG_EXT_PORT_STAGE_1 = 1,
DIG_EXT_PORT_STAGE_2 = 2,
DIG_EXT_PORT_STAGE_3 = 3,
DIG_EXT_PORT_STAGE_MAX = 4,
}DM_DIG_EXT_PORT_ALG_E;
typedef enum tag_DIG_Connect_Definition
{
DIG_STA_DISCONNECT = 0,
DIG_STA_CONNECT = 1,
DIG_STA_BEFORE_CONNECT = 2,
DIG_MultiSTA_DISCONNECT = 3,
DIG_MultiSTA_CONNECT = 4,
DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;
#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}
#define DM_MultiSTA_InitGainChangeNotify_CONNECT(_ADAPTER) \
DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_CONNECT)
#define DM_MultiSTA_InitGainChangeNotify_DISCONNECT(_ADAPTER) \
DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_DISCONNECT)
*/
#define DM_DIG_THRESH_HIGH 40
#define DM_DIG_THRESH_LOW 35
#define DMfalseALARM_THRESH_LOW 400
#define DMfalseALARM_THRESH_HIGH 1000
#define DM_DIG_MAX_NIC 0x4A
#define DM_DIG_MIN_NIC 0x1e /* 0x22/0x1c */
#define DM_DIG_MAX_AP 0x32
#define DM_DIG_MIN_AP 0x20
#define DM_DIG_MAX_NIC_HP 0x46
#define DM_DIG_MIN_NIC_HP 0x2e
#define DM_DIG_MAX_AP_HP 0x42
#define DM_DIG_MIN_AP_HP 0x30
/* vivi 92c&92d has different definition, 20110504 */
/* this is for 92c */
#define DM_DIG_FA_TH0 0x200/* 0x20 */
#define DM_DIG_FA_TH1 0x300/* 0x100 */
#define DM_DIG_FA_TH2 0x400/* 0x200 */
/* this is for 92d */
#define DM_DIG_FA_TH0_92D 0x100
#define DM_DIG_FA_TH1_92D 0x400
#define DM_DIG_FA_TH2_92D 0x600
#define DM_DIG_BACKOFF_MAX 12
#define DM_DIG_BACKOFF_MIN -4
#define DM_DIG_BACKOFF_DEFAULT 10
/* 3=========================================================== */
/* 3 AGC RX High Power Mode */
/* 3=========================================================== */
#define LNA_Low_Gain_1 0x64
#define LNA_Low_Gain_2 0x5A
#define LNA_Low_Gain_3 0x58
#define FA_RXHP_TH1 5000
#define FA_RXHP_TH2 1500
#define FA_RXHP_TH3 800
#define FA_RXHP_TH4 600
#define FA_RXHP_TH5 500
/* 3=========================================================== */
/* 3 EDCA */
/* 3=========================================================== */
/* 3=========================================================== */
/* 3 Dynamic Tx Power */
/* 3=========================================================== */
/* Dynamic Tx Power Control Threshold */
#define TX_POWER_NEAR_FIELD_THRESH_LVL2 74
#define TX_POWER_NEAR_FIELD_THRESH_LVL1 67
#define TX_POWER_NEAR_FIELD_THRESH_AP 0x3F
#define TxHighPwrLevel_Normal 0
#define TxHighPwrLevel_Level1 1
#define TxHighPwrLevel_Level2 2
#define TxHighPwrLevel_BT1 3
#define TxHighPwrLevel_BT2 4
#define TxHighPwrLevel_15 5
#define TxHighPwrLevel_35 6
#define TxHighPwrLevel_50 7
#define TxHighPwrLevel_70 8
#define TxHighPwrLevel_100 9
/* 3=========================================================== */
/* 3 Tx Power Tracking */
/* 3=========================================================== */
/* 3=========================================================== */
/* 3 Rate Adaptive */
/* 3=========================================================== */
#define DM_RATR_STA_INIT 0
#define DM_RATR_STA_HIGH 1
#define DM_RATR_STA_MIDDLE 2
#define DM_RATR_STA_LOW 3
/* 3=========================================================== */
/* 3 BB Power Save */
/* 3=========================================================== */
typedef enum tag_1R_CCA_Type_Definition
{
CCA_1R =0,
CCA_2R = 1,
CCA_MAX = 2,
}DM_1R_CCA_E;
typedef enum tag_RF_Type_Definition
{
RF_Save =0,
RF_Normal = 1,
RF_MAX = 2,
}DM_RF_E;
/* 3=========================================================== */
/* 3 Antenna Diversity */
/* 3=========================================================== */
typedef enum tag_SW_Antenna_Switch_Definition
{
Antenna_A = 1,
Antenna_B = 2,
Antenna_MAX = 3,
}DM_SWAS_E;
/* Maximal number of antenna detection mechanism needs to perform, added by Roger, 2011.12.28. */
#define MAX_ANTENNA_DETECTION_CNT 10
/* */
/* Extern Global Variables. */
/* */
#define OFDM_TABLE_SIZE_92C 37
#define OFDM_TABLE_SIZE_92D 43
#define CCK_TABLE_SIZE 33
extern u32 OFDMSwingTable[OFDM_TABLE_SIZE_92D];
extern u8 CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
extern u8 CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];
/* */
/* check Sta pointer valid or not */
/* */
#define IS_STA_VALID(pSta) (pSta)
/* 20100514 Joseph: Add definition for antenna switching test after link. */
/* This indicates two different the steps. */
/* In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air. */
/* In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK */
/* with original RSSI to determine if it is necessary to switch antenna. */
#define SWAW_STEP_PEAK 0
#define SWAW_STEP_DETERMINE 1
void ODM_Write_DIG(PDM_ODM_T pDM_Odm, u8 CurrentIGI);
void ODM_Write_CCK_CCA_Thres(PDM_ODM_T pDM_Odm, u8 CurCCK_CCAThres);
void
ODM_SetAntenna(
PDM_ODM_T pDM_Odm,
u8 Antenna);
#define dm_RF_Saving ODM_RF_Saving
void ODM_RF_Saving( PDM_ODM_T pDM_Odm,
u8 bForceInNormal );
#define SwAntDivRestAfterLink ODM_SwAntDivRestAfterLink
void ODM_SwAntDivRestAfterLink( PDM_ODM_T pDM_Odm);
#define dm_CheckTXPowerTracking ODM_TXPowerTrackingCheck
void
ODM_TXPowerTrackingCheck(
PDM_ODM_T pDM_Odm
);
bool
ODM_RAStateCheck(
PDM_ODM_T pDM_Odm,
s32 RSSI,
bool bForceUpdate,
u8 * pRATRState
);
#define dm_SWAW_RSSI_Check ODM_SwAntDivChkPerPktRssi
void ODM_SwAntDivChkPerPktRssi(
PDM_ODM_T pDM_Odm,
u8 StationID,
PODM_PHY_INFO_T pPhyInfo
);
u32 ConvertTo_dB(u32 Value);
u32
GetPSDData(
PDM_ODM_T pDM_Odm,
unsigned int point,
u8 initial_gain_psd);
void
odm_DIGbyRSSI_LPS(
PDM_ODM_T pDM_Odm
);
u32 ODM_Get_Rate_Bitmap(
PDM_ODM_T pDM_Odm,
u32 macid,
u32 ra_mask,
u8 rssi_level);
void ODM_DMInit(PDM_ODM_T pDM_Odm);
void
ODM_DMWatchdog(
PDM_ODM_T pDM_Odm /* For common use in the future */
);
void
ODM_CmnInfoInit(
PDM_ODM_T pDM_Odm,
ODM_CMNINFO_E CmnInfo,
u32 Value
);
void
ODM_CmnInfoHook(
PDM_ODM_T pDM_Odm,
ODM_CMNINFO_E CmnInfo,
void * pValue
);
void
ODM_CmnInfoPtrArrayHook(
PDM_ODM_T pDM_Odm,
ODM_CMNINFO_E CmnInfo,
u16 Index,
void * pValue
);
void
ODM_CmnInfoUpdate(
PDM_ODM_T pDM_Odm,
u32 CmnInfo,
u64 Value
);
void
ODM_InitAllTimers(
PDM_ODM_T pDM_Odm
);
void
ODM_CancelAllTimers(
PDM_ODM_T pDM_Odm
);
void
ODM_ReleaseAllTimers(
PDM_ODM_T pDM_Odm
);
void
ODM_ResetIQKResult(
PDM_ODM_T pDM_Odm
);
void
ODM_AntselStatistics_88C(
PDM_ODM_T pDM_Odm,
u8 MacId,
u32 PWDBAll,
bool isCCKrate
);
void
ODM_SingleDualAntennaDefaultSetting(
PDM_ODM_T pDM_Odm
);
bool
ODM_SingleDualAntennaDetection(
PDM_ODM_T pDM_Odm,
u8 mode
);
void odm_dtc(PDM_ODM_T pDM_Odm);
#endif
Reference in a new issue View git blame Copy permalink