skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-29 07:33:39 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/include/autoconf.h
Larry Finger 4342c7358c rtl8188eu: Fix some sparse errors 
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-05-27 17:32:24 -05:00

397 lines
9.5 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
//***** temporarily flag *******
//#define CONFIG_DISABLE_ODM
#define CONFIG_ODM_REFRESH_RAMASK
#define CONFIG_PHY_SETTING_WITH_ODM
//for FPGA VERIFICATION config
#define RTL8188E_FPGA_true_PHY_VERIFICATION 0
//***** temporarily flag *******
/*
* Public General Config
*/
#define AUTOCONF_INCLUDED
#define RTL871X_MODULE_NAME "88EU"
#define DRV_NAME "rtl8188eu"
#define CONFIG_USB_HCI
#define CONFIG_RTL8188E
#define PLATFORM_LINUX
//#define CONFIG_IOCTL_CFG80211
#if defined( CONFIG_PLATFORM_ARM_SUNxI) || defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
#ifndef CONFIG_IOCTL_CFG80211
#define CONFIG_IOCTL_CFG80211
#endif
#endif
#ifdef CONFIG_IOCTL_CFG80211
//#define RTW_USE_CFG80211_STA_EVENT /* Opne this for Android 4.1's wpa_supplicant */
#define CONFIG_CFG80211_FORCE_COMPATIBLE_2_6_37_UNDER
//#define CONFIG_DEBUG_CFG80211
//#define CONFIG_DRV_ISSUE_PROV_REQ // IOT FOR S2
#define CONFIG_SET_SCAN_DENY_TIMER
#endif
/*
* Internal General Config
*/
//#define CONFIG_H2CLBK
#define CONFIG_EMBEDDED_FWIMG
//#define CONFIG_FILE_FWIMG
#define CONFIG_XMIT_ACK
#ifdef CONFIG_XMIT_ACK
#define CONFIG_ACTIVE_KEEP_ALIVE_CHECK
#endif
#define CONFIG_80211N_HT
#define CONFIG_RECV_REORDERING_CTRL
//#define CONFIG_TCP_CSUM_OFFLOAD_RX
//#define CONFIG_DRVEXT_MODULE
#define CONFIG_SUPPORT_USB_INT
#ifdef CONFIG_SUPPORT_USB_INT
//#define CONFIG_USB_INTERRUPT_IN_PIPE
#endif
//#ifndef CONFIG_MP_INCLUDED
#define CONFIG_IPS
#ifdef CONFIG_IPS
//#define CONFIG_IPS_LEVEL_2 //enable this to set default IPS mode to IPS_LEVEL_2
#endif
#define SUPPORT_HW_RFOFF_DETECTED
#define CONFIG_LPS
#if defined(CONFIG_LPS) && defined(CONFIG_SUPPORT_USB_INT)
//#define CONFIG_LPS_LCLK
#endif
#ifdef CONFIG_LPS_LCLK
#define CONFIG_XMIT_THREAD_MODE
#endif
//befor link
#define CONFIG_ANTENNA_DIVERSITY
//after link
#ifdef CONFIG_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif
//#define CONFIG_CONCURRENT_MODE
#ifdef CONFIG_CONCURRENT_MODE
//#define CONFIG_HWPORT_SWAP //Port0->Sec , Port1 -> Pri
#define CONFIG_TSF_RESET_OFFLOAD // For 2 PORT TSF SYNC.
#endif
#define CONFIG_IOL
//#else //#ifndef CONFIG_MP_INCLUDED
//#endif //#ifndef CONFIG_MP_INCLUDED
#define CONFIG_AP_MODE
#ifdef CONFIG_AP_MODE
//#define CONFIG_INTERRUPT_BASED_TXBCN // Tx Beacon when driver BCN_OK ,BCN_ERR interrupt occurs
#if defined(CONFIG_CONCURRENT_MODE) && defined(CONFIG_INTERRUPT_BASED_TXBCN)
#undef CONFIG_INTERRUPT_BASED_TXBCN
#endif
#ifdef CONFIG_INTERRUPT_BASED_TXBCN
//#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#endif
#define CONFIG_NATIVEAP_MLME
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_HOSTAPD_MLME
#endif
#define CONFIG_FIND_BEST_CHANNEL
//#define CONFIG_NO_WIRELESS_HANDLERS
#endif
#define CONFIG_P2P
#ifdef CONFIG_P2P
//The CONFIG_WFD is for supporting the Wi-Fi display
//#define CONFIG_WFD
#ifndef CONFIG_WIFI_TEST
#define CONFIG_P2P_REMOVE_GROUP_INFO
#endif
//#define CONFIG_DBG_P2P
#define CONFIG_P2P_PS
//#define CONFIG_P2P_IPS
#endif
// Added by Kurt 20110511
//#define CONFIG_TDLS
#ifdef CONFIG_TDLS
// #ifndef CONFIG_WFD
// #define CONFIG_WFD
// #endif
// #define CONFIG_TDLS_AUTOSETUP
// #define CONFIG_TDLS_AUTOCHECKALIVE
#endif
#define CONFIG_SKB_COPY //for amsdu
#define CONFIG_LED
#ifdef CONFIG_LED
#define CONFIG_SW_LED
#ifdef CONFIG_SW_LED
//#define CONFIG_LED_HANDLED_BY_CMD_THREAD
#endif
#endif // CONFIG_LED
#ifdef CONFIG_IOL
#define CONFIG_IOL_NEW_GENERATION
#define CONFIG_IOL_READ_EFUSE_MAP
//#define DBG_IOL_READ_EFUSE_MAP
#define CONFIG_IOL_LLT
#define CONFIG_IOL_EFUSE_PATCH
#define CONFIG_IOL_IOREG_CFG
//#define CONFIG_IOL_IOREG_CFG_DBG
#endif
#define USB_INTERFERENCE_ISSUE // this should be checked in all usb interface
#define CONFIG_GLOBAL_UI_PID
#define CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING_RESUME
//#define CONFIG_ADAPTOR_INFO_CACHING_FILE // now just applied on 8192cu only, should make it general...
//#define CONFIG_RESUME_IN_WORKQUEUE
//#define CONFIG_SET_SCAN_DENY_TIMER
#define CONFIG_LONG_DELAY_ISSUE
#define CONFIG_NEW_SIGNAL_STAT_PROCESS
//#define CONFIG_SIGNAL_DISPLAY_DBM //display RX signal with dbm
#define RTW_NOTCH_FILTER 0 /* 0:Disable, 1:Enable, */
#define CONFIG_BR_EXT // Enable NAT2.5 support for STA mode interface with a L2 Bridge
#ifdef CONFIG_BR_EXT
#define CONFIG_BR_EXT_BRNAME "br0"
#endif // CONFIG_BR_EXT
#define CONFIG_TX_MCAST2UNI // Support IP multicast->unicast
//#define CONFIG_CHECK_AC_LIFETIME // Check packet lifetime of 4 ACs.
/*
* Interface Related Config
*/
#ifndef CONFIG_MINIMAL_MEMORY_USAGE
#define CONFIG_USB_TX_AGGREGATION
#define CONFIG_USB_RX_AGGREGATION
#endif
#define CONFIG_PREALLOC_RECV_SKB
//#define CONFIG_REDUCE_USB_TX_INT // Trade-off: Improve performance, but may cause TX URBs blocked by USB Host/Bus driver on few platforms.
//#define CONFIG_EASY_REPLACEMENT
/*
* CONFIG_USE_USB_BUFFER_ALLOC_XX uses Linux USB Buffer alloc API and is for Linux platform only now!
*/
//#define CONFIG_USE_USB_BUFFER_ALLOC_TX // Trade-off: For TX path, improve stability on some platforms, but may cause performance degrade on other platforms.
//#define CONFIG_USE_USB_BUFFER_ALLOC_RX // For RX path
#ifdef CONFIG_PLATFORM_ARM_SUNxI
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
#define CONFIG_USE_USB_BUFFER_ALLOC_TX
#endif
#endif
/*
* USB VENDOR REQ BUFFER ALLOCATION METHOD
* if not set we'll use function local variable (stack memory)
*/
//#define CONFIG_USB_VENDOR_REQ_BUFFER_DYNAMIC_ALLOCATE
#define CONFIG_USB_VENDOR_REQ_BUFFER_PREALLOC
#define CONFIG_USB_VENDOR_REQ_MUTEX
#define CONFIG_VENDOR_REQ_RETRY
//#define CONFIG_USB_SUPPORT_ASYNC_VDN_REQ
/*
* HAL Related Config
*/
#define RTL8188E_RX_PACKET_INCLUDE_CRC 0
#define SUPPORTED_BLOCK_IO
//#define CONFIG_ONLY_ONE_OUT_EP_TO_LOW 0
#define CONFIG_OUT_EP_WIFI_MODE 0
#define ENABLE_USB_DROP_INCORRECT_OUT 0
//#define RTL8192CU_ADHOC_WORKAROUND_SETTING
#define DISABLE_BB_RF 0
//#define RTL8191C_FPGA_NETWORKTYPE_ADHOC 0
#ifdef CONFIG_MP_INCLUDED
#define MP_DRIVER 1
#define CONFIG_MP_IWPRIV_SUPPORT
//#undef CONFIG_USB_TX_AGGREGATION
//#undef CONFIG_USB_RX_AGGREGATION
#else
#define MP_DRIVER 0
#endif
/*
* Platform Related Config
*/
#ifdef CONFIG_PLATFORM_MN10300
#define CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#if defined (CONFIG_SW_ANTENNA_DIVERSITY)
#undef CONFIG_SW_ANTENNA_DIVERSITY
#define CONFIG_HW_ANTENNA_DIVERSITY
#endif
#if defined (CONFIG_POWER_SAVING)
#undef CONFIG_POWER_SAVING
#endif
#endif//CONFIG_PLATFORM_MN10300
#ifdef CONFIG_PLATFORM_TI_DM365
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#endif
#if defined(CONFIG_PLATFORM_ACTIONS_ATM702X)
#ifdef CONFIG_USB_TX_AGGREGATION
#undef CONFIG_USB_TX_AGGREGATION
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
#define CONFIG_USE_USB_BUFFER_ALLOC_TX
#endif
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_RX
#define CONFIG_USE_USB_BUFFER_ALLOC_RX
#endif
#endif
/*
* Outsource Related Config
*/
#define RTL8192CE_SUPPORT 0
#define RTL8192CU_SUPPORT 0
#define RTL8192C_SUPPORT (RTL8192CE_SUPPORT|RTL8192CU_SUPPORT)
#define RTL8192DE_SUPPORT 0
#define RTL8192DU_SUPPORT 0
#define RTL8192D_SUPPORT (RTL8192DE_SUPPORT|RTL8192DU_SUPPORT)
#define RTL8723AU_SUPPORT 0
#define RTL8723AS_SUPPORT 0
#define RTL8723AE_SUPPORT 0
#define RTL8723A_SUPPORT (RTL8723AU_SUPPORT|RTL8723AS_SUPPORT|RTL8723AE_SUPPORT)
#define RTL8723_FPGA_VERIFICATION 0
#define RTL8188EE_SUPPORT 0
#define RTL8188EU_SUPPORT 1
#define RTL8188ES_SUPPORT 0
#define RTL8188E_SUPPORT (RTL8188EE_SUPPORT|RTL8188EU_SUPPORT|RTL8188ES_SUPPORT)
#define RTL8188E_FOR_TEST_CHIP 0
//#if (RTL8188E_SUPPORT==1)
#define RATE_ADAPTIVE_SUPPORT 1
#define POWER_TRAINING_ACTIVE 1
//#endif
#ifdef CONFIG_USB_TX_AGGREGATION
//#define CONFIG_TX_EARLY_MODE
#endif
#ifdef CONFIG_TX_EARLY_MODE
#define RTL8188E_EARLY_MODE_PKT_NUM_10 0
#endif
#define CONFIG_80211D
/*
* Debug Related Config
*/
#define DBG 1
//#define CONFIG_DEBUG /* DBG_88E, etc... */
//#define CONFIG_DEBUG_RTL871X /* RT_TRACE, RT_PRINT_DATA, _func_enter_, _func_exit_ */
#define CONFIG_PROC_DEBUG
#define DBG_CONFIG_ERROR_DETECT
//#define DBG_CONFIG_ERROR_DETECT_INT
//#define DBG_CONFIG_ERROR_RESET
//#define DBG_IO
//#define DBG_DELAY_OS
//#define DBG_MEM_ALLOC
//#define DBG_IOCTL
//#define DBG_TX
//#define DBG_XMIT_BUF
//#define DBG_XMIT_BUF_EXT
//#define DBG_TX_DROP_FRAME
//#define DBG_RX_DROP_FRAME
//#define DBG_RX_SEQ
//#define DBG_RX_SIGNAL_DISPLAY_PROCESSING
//#define DBG_RX_SIGNAL_DISPLAY_SSID_MONITORED "jeff-ap"
//#define DBG_SHOW_MCUFWDL_BEFORE_51_ENABLE
//#define DBG_ROAMING_TEST
//#define DBG_HAL_INIT_PROFILING
//TX use 1 urb
//#define CONFIG_SINGLE_XMIT_BUF
//RX use 1 urb
//#define CONFIG_SINGLE_RECV_BUF
Reference in a new issue View git blame Copy permalink