rtl8188eu/include/drv_types.h

345 lines
8 KiB
C
Raw Permalink Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2012 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
/*-----------------------------------------------------------------------------
For type defines and data structure defines
------------------------------------------------------------------------------*/
#ifndef __DRV_TYPES_H__
#define __DRV_TYPES_H__
#define DRV_NAME "r8188eu"
#define CONFIG_88EU_AP_MODE 1
#define CONFIG_88EU_P2P 1
#include <osdep_service.h>
#include <wlan_bssdef.h>
#include <drv_types_linux.h>
#include <rtw_ht.h>
#include <rtw_cmd.h>
#include <rtw_xmit.h>
#include <rtw_recv.h>
#include <hal_intf.h>
#include <hal_com.h>
#include <rtw_qos.h>
#include <rtw_security.h>
#include <rtw_pwrctrl.h>
#include <rtw_io.h>
#include <rtw_eeprom.h>
#include <sta_info.h>
#include <rtw_mlme.h>
#include <rtw_debug.h>
#include <rtw_rf.h>
#include <rtw_event.h>
#include <rtw_led.h>
#include <rtw_mlme_ext.h>
#include <rtw_p2p.h>
#include <rtw_ap.h>
#include <rtw_mp.h>
#include <rtw_br_ext.h>
enum _NIC_VERSION {
RTL8711_NIC,
RTL8712_NIC,
RTL8713_NIC,
RTL8716_NIC
};
#define SPEC_DEV_ID_NONE BIT(0)
#define SPEC_DEV_ID_DISABLE_HT BIT(1)
#define SPEC_DEV_ID_ENABLE_PS BIT(2)
#define SPEC_DEV_ID_RF_CONFIG_1T1R BIT(3)
#define SPEC_DEV_ID_RF_CONFIG_2T2R BIT(4)
#define SPEC_DEV_ID_ASSIGN_IFNAME BIT(5)
struct specific_device_id {
u32 flags;
u16 idVendor;
u16 idProduct;
};
struct registry_priv {
u8 chip_version;
u8 rfintfs;
u8 lbkmode;
u8 hci;
struct ndis_802_11_ssid ssid;
u8 network_mode; /* infra, ad-hoc, auto */
u8 channel;/* ad-hoc support requirement */
u8 wireless_mode;/* A, B, G, auto */
u8 scan_mode;/* active, passive */
u8 radio_enable;
u8 preamble;/* long, short, auto */
u8 vrtl_carrier_sense;/* Enable, Disable, Auto */
u8 vcs_type;/* RTS/CTS, CTS-to-self */
u16 rts_thresh;
u16 frag_thresh;
u8 adhoc_tx_pwr;
u8 soft_ap;
u8 power_mgnt;
u8 ips_mode;
u8 smart_ps;
u8 long_retry_lmt;
u8 short_retry_lmt;
u16 busy_thresh;
u8 ack_policy;
u8 mp_mode;
u8 software_encrypt;
u8 software_decrypt;
u8 acm_method;
/* UAPSD */
u8 wmm_enable;
u8 uapsd_enable;
u8 uapsd_max_sp;
u8 uapsd_acbk_en;
u8 uapsd_acbe_en;
u8 uapsd_acvi_en;
u8 uapsd_acvo_en;
struct wlan_bssid_ex dev_network;
u8 ht_enable;
u8 cbw40_enable;
u8 ampdu_enable;/* for tx */
u8 rx_stbc;
u8 ampdu_amsdu;/* A-MPDU Supports A-MSDU is permitted */
u8 lowrate_two_xmit;
u8 rf_config;
u8 low_power;
u8 wifi_spec;/* !turbo_mode */
u8 channel_plan;
bool bAcceptAddbaReq;
u8 antdiv_cfg;
u8 antdiv_type;
u8 usbss_enable;/* 0:disable,1:enable */
u8 hwpdn_mode;/* 0:disable,1:enable,2:decide by EFUSE config */
u8 hwpwrp_detect;/* 0:disable,1:enable */
u8 hw_wps_pbc;/* 0:disable,1:enable */
u8 max_roaming_times; /* the max number driver will try */
u8 fw_iol; /* enable iol without other concern */
u8 enable80211d;
u8 ifname[16];
u8 if2name[16];
u8 notch_filter;
};
/* For registry parameters */
#define RGTRY_OFT(field) ((u32)FIELD_OFFSET(struct registry_priv, field))
#define RGTRY_SZ(field) sizeof(((struct registry_priv *)0)->field)
#define BSSID_OFT(field) ((u32)FIELD_OFFSET(struct wlan_bssid_ex, field))
#define BSSID_SZ(field) sizeof(((struct wlan_bssid_ex *)0)->field)
#define MAX_CONTINUAL_URB_ERR 4
struct rt_firmware {
u8 *szFwBuffer;
u32 ulFwLength;
};
struct dvobj_priv {
struct adapter *if1;
struct adapter *if2;
/* For 92D, DMDP have 2 interface. */
u8 InterfaceNumber;
u8 NumInterfaces;
/* In /Out Pipe information */
int RtInPipe[2];
int RtOutPipe[3];
u8 Queue2Pipe[HW_QUEUE_ENTRY];/* for out pipe mapping */
u8 irq_alloc;
struct rt_firmware firmware;
/*-------- below is for USB INTERFACE --------*/
u8 nr_endpoint;
u8 ishighspeed;
u8 RtNumInPipes;
u8 RtNumOutPipes;
int ep_num[5]; /* endpoint number */
int RegUsbSS;
struct semaphore usb_suspend_sema;
struct mutex usb_vendor_req_mutex;
u8 *usb_alloc_vendor_req_buf;
u8 *usb_vendor_req_buf;
struct usb_interface *pusbintf;
struct usb_device *pusbdev;
ATOMIC_T continual_urb_error;
u8 signal_strength;
};
static inline struct device *dvobj_to_dev(struct dvobj_priv *dvobj)
{
/* todo: get interface type from dvobj and the return
* the dev accordingly */
return &dvobj->pusbintf->dev;
};
enum _IFACE_TYPE {
IFACE_PORT0, /* mapping to port0 for C/D series chips */
IFACE_PORT1, /* mapping to port1 for C/D series chip */
MAX_IFACE_PORT,
};
enum _ADAPTER_TYPE {
PRIMARY_ADAPTER,
SECONDARY_ADAPTER,
MAX_ADAPTER,
};
enum driver_state {
DRIVER_NORMAL = 0,
DRIVER_DISAPPEAR = 1,
DRIVER_REPLACE_DONGLE = 2,
};
struct adapter {
int DriverState;/* for disable driver using module, use dongle toi
* replace module. */
int pid[3];/* process id from UI, 0:wps, 1:hostapd, 2:dhcpcd */
int bDongle;/* build-in module or external dongle */
u16 chip_type;
u16 HardwareType;
u16 interface_type;/* USB,SDIO,SPI,PCI */
struct dvobj_priv *dvobj;
struct mlme_priv mlmepriv;
struct mlme_ext_priv mlmeextpriv;
struct cmd_priv cmdpriv;
struct evt_priv evtpriv;
struct io_priv iopriv;
struct xmit_priv xmitpriv;
struct recv_priv recvpriv;
struct sta_priv stapriv;
struct security_priv securitypriv;
struct registry_priv registrypriv;
struct pwrctrl_priv pwrctrlpriv;
struct eeprom_priv eeprompriv;
struct led_priv ledpriv;
struct mp_priv mppriv;
#ifdef CONFIG_88EU_AP_MODE
struct hostapd_priv *phostapdpriv;
#endif
struct wifidirect_info wdinfo;
void *HalData;
u32 hal_data_sz;
struct hal_ops HalFunc;
s32 bDriverStopped;
s32 bSurpriseRemoved;
s32 bCardDisableWOHSM;
u32 IsrContent;
u32 ImrContent;
u8 EepromAddressSize;
u8 hw_init_completed;
u8 bDriverIsGoingToUnload;
u8 init_adpt_in_progress;
u8 bHaltInProgress;
s8 signal_strength;
void *cmdThread;
void *evtThread;
void *xmitThread;
void *recvThread;
void (*intf_start)(struct adapter *adapter);
void (*intf_stop)(struct adapter *adapter);
struct net_device *pnetdev;
/* used by rtw_rereg_nd_name related function */
struct rereg_nd_name_data {
struct net_device *old_pnetdev;
char old_ifname[IFNAMSIZ];
u8 old_ips_mode;
u8 old_bRegUseLed;
} rereg_nd_name_priv;
int bup;
struct net_device_stats stats;
struct iw_statistics iwstats;
struct proc_dir_entry *dir_dev;/* for proc directory */
int net_closed;
u8 bFWReady;
u8 bBTFWReady;
u8 bReadPortCancel;
u8 bWritePortCancel;
u8 bRxRSSIDisplay;
/* The driver will show up the desired channel number
* when this flag is 1. */
u8 bNotifyChannelChange;
#ifdef CONFIG_88EU_P2P
/* The driver will show the current P2P status when the
* upper application reads it. */
u8 bShowGetP2PState;
#endif
struct adapter *pbuddy_adapter;
struct mutex *hw_init_mutex;
spinlock_t br_ext_lock;
struct nat25_network_db_entry *nethash[NAT25_HASH_SIZE];
int pppoe_connection_in_progress;
unsigned char pppoe_addr[MACADDRLEN];
unsigned char scdb_mac[MACADDRLEN];
unsigned char scdb_ip[4];
struct nat25_network_db_entry *scdb_entry;
unsigned char br_mac[MACADDRLEN];
unsigned char br_ip[4];
struct br_ext_info ethBrExtInfo;
u8 fix_rate;
unsigned char in_cta_test;
};
#define adapter_to_dvobj(adapter) (adapter->dvobj)
int rtw_handle_dualmac(struct adapter *adapter, bool init);
static inline u8 *myid(struct eeprom_priv *peepriv)
{
return peepriv->mac_addr;
}
#endif /* __DRV_TYPES_H__ */