rtl8188eu/hal/hal_mp.c

900 lines
28 KiB
C
Raw Normal View History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#define _HAL_MP_C_
#include <drv_types.h>
#ifdef CONFIG_MP_INCLUDED
#ifdef RTW_HALMAC
#include <hal_data.h> /* struct HAL_DATA_TYPE, RF register definition and etc. */
#else /* !RTW_HALMAC */
#include <rtl8188e_hal.h>
#endif /* !RTW_HALMAC */
static u8 MgntQuery_NssTxRate(u16 Rate)
{
u8 NssNum = RF_TX_NUM_NONIMPLEMENT;
if ((Rate >= MGN_MCS8 && Rate <= MGN_MCS15) ||
(Rate >= MGN_VHT2SS_MCS0 && Rate <= MGN_VHT2SS_MCS9))
NssNum = RF_2TX;
else if ((Rate >= MGN_MCS16 && Rate <= MGN_MCS23) ||
(Rate >= MGN_VHT3SS_MCS0 && Rate <= MGN_VHT3SS_MCS9))
NssNum = RF_3TX;
else if ((Rate >= MGN_MCS24 && Rate <= MGN_MCS31) ||
(Rate >= MGN_VHT4SS_MCS0 && Rate <= MGN_VHT4SS_MCS9))
NssNum = RF_4TX;
else
NssNum = RF_1TX;
return NssNum;
}
void hal_mpt_SwitchRfSetting(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u8 ChannelToSw = pMptCtx->MptChannelToSw;
ULONG ulRateIdx = pMptCtx->mpt_rate_index;
ULONG ulbandwidth = pMptCtx->MptBandWidth;
/* <20120525, Kordan> Dynamic mechanism for APK, asked by Dennis.*/
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
phy_set_rf_reg(pAdapter, ODM_RF_PATH_A, RF_0x52, 0x000F0, pMptCtx->backup0x52_RF_A);
phy_set_rf_reg(pAdapter, ODM_RF_PATH_B, RF_0x52, 0x000F0, pMptCtx->backup0x52_RF_B);
}
}
s32 hal_mpt_SetPowerTracking(PADAPTER padapter, u8 enable)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct PHY_DM_STRUCT *pDM_Odm = &(pHalData->odmpriv);
if (!netif_running(padapter->pnetdev)) {
return _FAIL;
}
if (check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
return _FAIL;
}
if (enable)
pDM_Odm->rf_calibrate_info.txpowertrack_control = _TRUE;
else
pDM_Odm->rf_calibrate_info.txpowertrack_control = _FALSE;
return _SUCCESS;
}
void hal_mpt_GetPowerTracking(PADAPTER padapter, u8 *enable)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct PHY_DM_STRUCT *pDM_Odm = &(pHalData->odmpriv);
*enable = pDM_Odm->rf_calibrate_info.txpowertrack_control;
}
void hal_mpt_CCKTxPowerAdjust(PADAPTER Adapter, bool bInCH14)
{
u32 TempVal = 0, TempVal2 = 0, TempVal3 = 0;
u32 CurrCCKSwingVal = 0, CCKSwingIndex = 12;
u8 i;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(Adapter);
PMPT_CONTEXT pMptCtx = &(Adapter->mppriv.mpt_ctx);
u1Byte u1Channel = pHalData->current_channel;
ULONG ulRateIdx = pMptCtx->mpt_rate_index;
u1Byte DataRate = 0xFF;
DataRate = mpt_to_mgnt_rate(ulRateIdx);
if (u1Channel == 14 && IS_CCK_RATE(DataRate))
pHalData->bCCKinCH14 = TRUE;
else
pHalData->bCCKinCH14 = FALSE;
/* get current cck swing value and check 0xa22 & 0xa23 later to match the table.*/
CurrCCKSwingVal = read_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord);
if (!pHalData->bCCKinCH14) {
/* Readback the current bb cck swing value and compare with the table to */
/* get the current swing index */
for (i = 0; i < CCK_TABLE_SIZE; i++) {
if (((CurrCCKSwingVal & 0xff) == (u32)cck_swing_table_ch1_ch13[i][0]) &&
(((CurrCCKSwingVal & 0xff00) >> 8) == (u32)cck_swing_table_ch1_ch13[i][1])) {
CCKSwingIndex = i;
break;
}
}
/*Write 0xa22 0xa23*/
TempVal = cck_swing_table_ch1_ch13[CCKSwingIndex][0] +
(cck_swing_table_ch1_ch13[CCKSwingIndex][1] << 8);
/*Write 0xa24 ~ 0xa27*/
TempVal2 = 0;
TempVal2 = cck_swing_table_ch1_ch13[CCKSwingIndex][2] +
(cck_swing_table_ch1_ch13[CCKSwingIndex][3] << 8) +
(cck_swing_table_ch1_ch13[CCKSwingIndex][4] << 16) +
(cck_swing_table_ch1_ch13[CCKSwingIndex][5] << 24);
/*Write 0xa28 0xa29*/
TempVal3 = 0;
TempVal3 = cck_swing_table_ch1_ch13[CCKSwingIndex][6] +
(cck_swing_table_ch1_ch13[CCKSwingIndex][7] << 8);
} else {
for (i = 0; i < CCK_TABLE_SIZE; i++) {
if (((CurrCCKSwingVal & 0xff) == (u32)cck_swing_table_ch14[i][0]) &&
(((CurrCCKSwingVal & 0xff00) >> 8) == (u32)cck_swing_table_ch14[i][1])) {
CCKSwingIndex = i;
break;
}
}
/*Write 0xa22 0xa23*/
TempVal = cck_swing_table_ch14[CCKSwingIndex][0] +
(cck_swing_table_ch14[CCKSwingIndex][1] << 8);
/*Write 0xa24 ~ 0xa27*/
TempVal2 = 0;
TempVal2 = cck_swing_table_ch14[CCKSwingIndex][2] +
(cck_swing_table_ch14[CCKSwingIndex][3] << 8) +
(cck_swing_table_ch14[CCKSwingIndex][4] << 16) +
(cck_swing_table_ch14[CCKSwingIndex][5] << 24);
/*Write 0xa28 0xa29*/
TempVal3 = 0;
TempVal3 = cck_swing_table_ch14[CCKSwingIndex][6] +
(cck_swing_table_ch14[CCKSwingIndex][7] << 8);
}
write_bbreg(Adapter, rCCK0_TxFilter1, bMaskHWord, TempVal);
write_bbreg(Adapter, rCCK0_TxFilter2, bMaskDWord, TempVal2);
write_bbreg(Adapter, rCCK0_DebugPort, bMaskLWord, TempVal3);
}
void hal_mpt_SetChannel(PADAPTER pAdapter)
{
u8 eRFPath;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
struct PHY_DM_STRUCT *pDM_Odm = &(pHalData->odmpriv);
struct mp_priv *pmp = &pAdapter->mppriv;
u8 channel = pmp->channel;
u8 bandwidth = pmp->bandwidth;
hal_mpt_SwitchRfSetting(pAdapter);
pHalData->bSwChnl = _TRUE;
pHalData->bSetChnlBW = _TRUE;
rtw_hal_set_chnl_bw(pAdapter, channel, bandwidth, 0, 0);
hal_mpt_CCKTxPowerAdjust(pAdapter, pHalData->bCCKinCH14);
}
/*
* Notice
* Switch bandwitdth may change center frequency(channel)
*/
void hal_mpt_SetBandwidth(PADAPTER pAdapter)
{
struct mp_priv *pmp = &pAdapter->mppriv;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u8 channel = pmp->channel;
u8 bandwidth = pmp->bandwidth;
pHalData->bSwChnl = _TRUE;
pHalData->bSetChnlBW = _TRUE;
rtw_hal_set_chnl_bw(pAdapter, channel, bandwidth, 0, 0);
hal_mpt_SwitchRfSetting(pAdapter);
}
static void mpt_SetTxPower_Old(PADAPTER pAdapter, MPT_TXPWR_DEF Rate, u8 *pTxPower)
{
switch (Rate) {
case MPT_CCK: {
u4Byte TxAGC = 0, pwr = 0;
u1Byte rf;
pwr = pTxPower[ODM_RF_PATH_A];
if (pwr < 0x3f) {
TxAGC = (pwr << 16) | (pwr << 8) | (pwr);
phy_set_bb_reg(pAdapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, pTxPower[ODM_RF_PATH_A]);
phy_set_bb_reg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, 0xffffff00, TxAGC);
}
pwr = pTxPower[ODM_RF_PATH_B];
if (pwr < 0x3f) {
TxAGC = (pwr << 16) | (pwr << 8) | (pwr);
phy_set_bb_reg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, pTxPower[ODM_RF_PATH_B]);
phy_set_bb_reg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, TxAGC);
}
}
break;
case MPT_OFDM_AND_HT: {
u4Byte TxAGC = 0;
u1Byte pwr = 0, rf;
pwr = pTxPower[0];
if (pwr < 0x3f) {
TxAGC |= ((pwr << 24) | (pwr << 16) | (pwr << 8) | pwr);
RTW_INFO("HT Tx-rf(A) Power = 0x%x\n", TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Rate18_06, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Rate54_24, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Mcs03_Mcs00, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Mcs07_Mcs04, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Mcs11_Mcs08, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_A_Mcs15_Mcs12, bMaskDWord, TxAGC);
}
TxAGC = 0;
pwr = pTxPower[1];
if (pwr < 0x3f) {
TxAGC |= ((pwr << 24) | (pwr << 16) | (pwr << 8) | pwr);
RTW_INFO("HT Tx-rf(B) Power = 0x%x\n", TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Rate18_06, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Rate54_24, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Mcs03_Mcs00, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Mcs07_Mcs04, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Mcs11_Mcs08, bMaskDWord, TxAGC);
phy_set_bb_reg(pAdapter, rTxAGC_B_Mcs15_Mcs12, bMaskDWord, TxAGC);
}
}
break;
default:
break;
}
RTW_INFO("<===mpt_SetTxPower_Old()\n");
}
static void
mpt_SetTxPower(
PADAPTER pAdapter,
MPT_TXPWR_DEF Rate,
pu1Byte pTxPower
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
u1Byte path = 0 , i = 0, MaxRate = MGN_6M;
u1Byte StartPath = ODM_RF_PATH_A, EndPath = ODM_RF_PATH_B;
switch (Rate) {
case MPT_CCK: {
u1Byte rate[] = {MGN_1M, MGN_2M, MGN_5_5M, MGN_11M};
for (path = StartPath; path <= EndPath; path++)
for (i = 0; i < sizeof(rate); ++i)
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
}
break;
case MPT_OFDM: {
u1Byte rate[] = {
MGN_6M, MGN_9M, MGN_12M, MGN_18M,
MGN_24M, MGN_36M, MGN_48M, MGN_54M,
};
for (path = StartPath; path <= EndPath; path++)
for (i = 0; i < sizeof(rate); ++i)
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
}
break;
case MPT_HT: {
u1Byte rate[] = {
MGN_MCS0, MGN_MCS1, MGN_MCS2, MGN_MCS3, MGN_MCS4,
MGN_MCS5, MGN_MCS6, MGN_MCS7, MGN_MCS8, MGN_MCS9,
MGN_MCS10, MGN_MCS11, MGN_MCS12, MGN_MCS13, MGN_MCS14,
MGN_MCS15, MGN_MCS16, MGN_MCS17, MGN_MCS18, MGN_MCS19,
MGN_MCS20, MGN_MCS21, MGN_MCS22, MGN_MCS23, MGN_MCS24,
MGN_MCS25, MGN_MCS26, MGN_MCS27, MGN_MCS28, MGN_MCS29,
MGN_MCS30, MGN_MCS31,
};
if (pHalData->rf_type == RF_3T3R)
MaxRate = MGN_MCS23;
else if (pHalData->rf_type == RF_2T2R)
MaxRate = MGN_MCS15;
else
MaxRate = MGN_MCS7;
for (path = StartPath; path <= EndPath; path++) {
for (i = 0; i < sizeof(rate); ++i) {
if (rate[i] > MaxRate)
break;
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
}
}
}
break;
case MPT_VHT: {
u1Byte rate[] = {
MGN_VHT1SS_MCS0, MGN_VHT1SS_MCS1, MGN_VHT1SS_MCS2, MGN_VHT1SS_MCS3, MGN_VHT1SS_MCS4,
MGN_VHT1SS_MCS5, MGN_VHT1SS_MCS6, MGN_VHT1SS_MCS7, MGN_VHT1SS_MCS8, MGN_VHT1SS_MCS9,
MGN_VHT2SS_MCS0, MGN_VHT2SS_MCS1, MGN_VHT2SS_MCS2, MGN_VHT2SS_MCS3, MGN_VHT2SS_MCS4,
MGN_VHT2SS_MCS5, MGN_VHT2SS_MCS6, MGN_VHT2SS_MCS7, MGN_VHT2SS_MCS8, MGN_VHT2SS_MCS9,
MGN_VHT3SS_MCS0, MGN_VHT3SS_MCS1, MGN_VHT3SS_MCS2, MGN_VHT3SS_MCS3, MGN_VHT3SS_MCS4,
MGN_VHT3SS_MCS5, MGN_VHT3SS_MCS6, MGN_VHT3SS_MCS7, MGN_VHT3SS_MCS8, MGN_VHT3SS_MCS9,
MGN_VHT4SS_MCS0, MGN_VHT4SS_MCS1, MGN_VHT4SS_MCS2, MGN_VHT4SS_MCS3, MGN_VHT4SS_MCS4,
MGN_VHT4SS_MCS5, MGN_VHT4SS_MCS6, MGN_VHT4SS_MCS7, MGN_VHT4SS_MCS8, MGN_VHT4SS_MCS9,
};
if (pHalData->rf_type == RF_3T3R)
MaxRate = MGN_VHT3SS_MCS9;
else if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_2T4R)
MaxRate = MGN_VHT2SS_MCS9;
else
MaxRate = MGN_VHT1SS_MCS9;
for (path = StartPath; path <= EndPath; path++) {
for (i = 0; i < sizeof(rate); ++i) {
if (rate[i] > MaxRate)
break;
PHY_SetTxPowerIndex(pAdapter, pTxPower[path], path, rate[i]);
}
}
}
break;
default:
RTW_INFO("<===mpt_SetTxPower: Illegal channel!!\n");
break;
}
}
void hal_mpt_SetTxPower(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
struct PHY_DM_STRUCT *pDM_Odm = &pHalData->odmpriv;
if (pHalData->rf_chip < RF_TYPE_MAX) {
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
u8 path = (pHalData->antenna_tx_path == ANTENNA_A) ? (ODM_RF_PATH_A) : (ODM_RF_PATH_B);
RTW_INFO("===> MPT_ProSetTxPower: Old\n");
mpt_SetTxPower_Old(pAdapter, MPT_CCK, pMptCtx->TxPwrLevel);
mpt_SetTxPower_Old(pAdapter, MPT_OFDM_AND_HT, pMptCtx->TxPwrLevel);
} else {
RTW_INFO("===> MPT_ProSetTxPower: Jaguar/Jaguar2\n");
mpt_SetTxPower(pAdapter, MPT_CCK, pMptCtx->TxPwrLevel);
mpt_SetTxPower(pAdapter, MPT_OFDM, pMptCtx->TxPwrLevel);
mpt_SetTxPower(pAdapter, MPT_HT, pMptCtx->TxPwrLevel);
mpt_SetTxPower(pAdapter, MPT_VHT, pMptCtx->TxPwrLevel);
}
} else
RTW_INFO("RFChipID < RF_TYPE_MAX, the RF chip is not supported - %d\n", pHalData->rf_chip);
odm_clear_txpowertracking_state(pDM_Odm);
}
void hal_mpt_SetDataRate(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u32 DataRate;
DataRate = mpt_to_mgnt_rate(pMptCtx->mpt_rate_index);
hal_mpt_SwitchRfSetting(pAdapter);
hal_mpt_CCKTxPowerAdjust(pAdapter, pHalData->bCCKinCH14);
}
#define RF_PATH_AB 22
static void mpt_SetRFPath_819X(PADAPTER pAdapter)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u4Byte ulAntennaTx, ulAntennaRx;
R_ANTENNA_SELECT_OFDM *p_ofdm_tx; /* OFDM Tx register */
R_ANTENNA_SELECT_CCK *p_cck_txrx;
u1Byte r_rx_antenna_ofdm = 0, r_ant_select_cck_val = 0;
u1Byte chgTx = 0, chgRx = 0;
u4Byte r_ant_sel_cck_val = 0, r_ant_select_ofdm_val = 0, r_ofdm_tx_en_val = 0;
ulAntennaTx = pHalData->antenna_tx_path;
ulAntennaRx = pHalData->AntennaRxPath;
p_ofdm_tx = (R_ANTENNA_SELECT_OFDM *)&r_ant_select_ofdm_val;
p_cck_txrx = (R_ANTENNA_SELECT_CCK *)&r_ant_select_cck_val;
p_ofdm_tx->r_ant_ht1 = 0x1;
p_ofdm_tx->r_ant_ht2 = 0x2;/*Second TX RF path is A*/
p_ofdm_tx->r_ant_non_ht = 0x3;/*/ 0x1+0x2=0x3 */
switch (ulAntennaTx) {
case ANTENNA_A:
p_ofdm_tx->r_tx_antenna = 0x1;
r_ofdm_tx_en_val = 0x1;
p_ofdm_tx->r_ant_l = 0x1;
p_ofdm_tx->r_ant_ht_s1 = 0x1;
p_ofdm_tx->r_ant_non_ht_s1 = 0x1;
p_cck_txrx->r_ccktx_enable = 0x8;
chgTx = 1;
/*/ From SD3 Willis suggestion !!! Set RF A=TX and B as standby*/
{
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 1);
r_ofdm_tx_en_val = 0x3;
/*/ Power save*/
/*/cosa r_ant_select_ofdm_val = 0x11111111;*/
/*/ We need to close RFB by SW control*/
if (pHalData->rf_type == RF_2T2R) {
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 0);
}
}
pMptCtx->mpt_rf_path = ODM_RF_PATH_A;
break;
case ANTENNA_B:
p_ofdm_tx->r_tx_antenna = 0x2;
r_ofdm_tx_en_val = 0x2;
p_ofdm_tx->r_ant_l = 0x2;
p_ofdm_tx->r_ant_ht_s1 = 0x2;
p_ofdm_tx->r_ant_non_ht_s1 = 0x2;
p_cck_txrx->r_ccktx_enable = 0x4;
chgTx = 1;
/*/ From SD3 Willis suggestion !!! Set RF A as standby*/
{
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
/*/ 2008/10/31 MH From SD3 Willi's suggestion. We must read RF 1T table.*/
/*/ 2009/01/08 MH From Sd3 Willis. We need to close RFA by SW control*/
if (pHalData->rf_type == RF_2T2R || pHalData->rf_type == RF_1T2R) {
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XA_RFInterfaceOE, BIT10, 0);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
/*/phy_set_bb_reg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);*/
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 0);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
}
}
pMptCtx->mpt_rf_path = ODM_RF_PATH_B;
break;
case ANTENNA_AB:/*/ For 8192S*/
p_ofdm_tx->r_tx_antenna = 0x3;
r_ofdm_tx_en_val = 0x3;
p_ofdm_tx->r_ant_l = 0x3;
p_ofdm_tx->r_ant_ht_s1 = 0x3;
p_ofdm_tx->r_ant_non_ht_s1 = 0x3;
p_cck_txrx->r_ccktx_enable = 0xC;
chgTx = 1;
/*/ From SD3Willis suggestion !!! Set RF B as standby*/
{
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, 0xe, 2);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, 0xe, 2);
/* Disable Power save*/
/*cosa r_ant_select_ofdm_val = 0x3321333;*/
/* 2009/01/08 MH From Sd3 Willis. We need to enable RFA/B by SW control*/
if (pHalData->rf_type == RF_2T2R) {
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT10, 0);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFInterfaceSW, BIT26, 0);
/*/phy_set_bb_reg(pAdapter, rFPGA0_XB_RFInterfaceOE, BIT10, 0);*/
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT1, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XAB_RFParameter, BIT17, 1);
}
}
pMptCtx->mpt_rf_path = ODM_RF_PATH_AB;
break;
default:
break;
}
switch (ulAntennaRx) {
case ANTENNA_A:
r_rx_antenna_ofdm = 0x1; /* A*/
p_cck_txrx->r_cckrx_enable = 0x0; /* default: A*/
p_cck_txrx->r_cckrx_enable_2 = 0x0; /* option: A*/
chgRx = 1;
break;
case ANTENNA_B:
r_rx_antenna_ofdm = 0x2; /*/ B*/
p_cck_txrx->r_cckrx_enable = 0x1; /*/ default: B*/
p_cck_txrx->r_cckrx_enable_2 = 0x1; /*/ option: B*/
chgRx = 1;
break;
case ANTENNA_AB:/*/ For 8192S and 8192E/U...*/
r_rx_antenna_ofdm = 0x3;/*/ AB*/
p_cck_txrx->r_cckrx_enable = 0x0;/*/ default:A*/
p_cck_txrx->r_cckrx_enable_2 = 0x1;/*/ option:B*/
chgRx = 1;
break;
default:
break;
}
if (chgTx && chgRx) {
switch (pHalData->rf_chip) {
case RF_8225:
case RF_8256:
case RF_6052:
/*/r_ant_sel_cck_val = r_ant_select_cck_val;*/
phy_set_bb_reg(pAdapter, rFPGA1_TxInfo, 0x7fffffff, r_ant_select_ofdm_val); /*/OFDM Tx*/
phy_set_bb_reg(pAdapter, rFPGA0_TxInfo, 0x0000000f, r_ofdm_tx_en_val); /*/OFDM Tx*/
phy_set_bb_reg(pAdapter, rOFDM0_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /*/OFDM Rx*/
phy_set_bb_reg(pAdapter, rOFDM1_TRxPathEnable, 0x0000000f, r_rx_antenna_ofdm); /*/OFDM Rx*/
phy_set_bb_reg(pAdapter, rCCK0_AFESetting, bMaskByte3, r_ant_select_cck_val);/*/r_ant_sel_cck_val); /CCK TxRx*/
break;
default:
RTW_INFO("Unsupported RFChipID for switching antenna.\n");
break;
}
}
} /* MPT_ProSetRFPath */
void hal_mpt_SetAntenna(PADAPTER pAdapter)
{
RTW_INFO("Do %s\n", __func__);
mpt_SetRFPath_819X(pAdapter);
RTW_INFO("mpt_SetRFPath_819X Do %s\n", __func__);
}
s32 hal_mpt_SetThermalMeter(PADAPTER pAdapter, u8 target_ther)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
if (!netif_running(pAdapter->pnetdev)) {
return _FAIL;
}
if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == _FALSE) {
return _FAIL;
}
target_ther &= 0xff;
if (target_ther < 0x07)
target_ther = 0x07;
else if (target_ther > 0x1d)
target_ther = 0x1d;
pHalData->eeprom_thermal_meter = target_ther;
return _SUCCESS;
}
void hal_mpt_TriggerRFThermalMeter(PADAPTER pAdapter)
{
phy_set_rf_reg(pAdapter, ODM_RF_PATH_A, 0x42, BIT17 | BIT16, 0x03);
}
u8 hal_mpt_ReadRFThermalMeter(PADAPTER pAdapter)
{
u32 ThermalValue = 0;
ThermalValue = (u1Byte)phy_query_rf_reg(pAdapter, ODM_RF_PATH_A, 0x42, 0xfc00); /*0x42: RF Reg[15:10]*/
return (u8)ThermalValue;
}
void hal_mpt_GetThermalMeter(PADAPTER pAdapter, u8 *value)
{
hal_mpt_TriggerRFThermalMeter(pAdapter);
rtw_msleep_os(1000);
*value = hal_mpt_ReadRFThermalMeter(pAdapter);
}
void hal_mpt_SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
pAdapter->mppriv.mpt_ctx.bSingleCarrier = bStart;
if (bStart) {/*/ Start Single Carrier.*/
/*/ Start Single Carrier.*/
/*/ 1. if OFDM block on?*/
if (!phy_query_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 1); /*set OFDM block on*/
/*/ 2. set CCK test mode off, set to CCK normal mode*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0);
/*/ 3. turn on scramble setting*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, 1);
/*/ 4. Turn On Continue Tx and turn off the other test modes.*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_SingleCarrier);
} else {
/*/ Stop Single Carrier.*/
/*/ Stop Single Carrier.*/
/*/ Turn off all test modes.*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_ALL_OFF);
rtw_msleep_os(10);
/*/BB Reset*/
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
}
}
void hal_mpt_SetSingleToneTx(PADAPTER pAdapter, u8 bStart)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u4Byte ulAntennaTx = pHalData->antenna_tx_path;
static u4Byte regRF = 0, regBB0 = 0, regBB1 = 0, regBB2 = 0, regBB3 = 0;
u8 rfPath;
switch (ulAntennaTx) {
case ANTENNA_B:
rfPath = ODM_RF_PATH_B;
break;
case ANTENNA_C:
rfPath = ODM_RF_PATH_C;
break;
case ANTENNA_D:
rfPath = ODM_RF_PATH_D;
break;
case ANTENNA_A:
default:
rfPath = ODM_RF_PATH_A;
break;
}
pAdapter->mppriv.mpt_ctx.is_single_tone = bStart;
if (bStart) {
/*/ Start Single Tone.*/
/*/ <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu)*/
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
regRF = phy_query_rf_reg(pAdapter, rfPath, lna_low_gain_3, bRFRegOffsetMask);
phy_set_rf_reg(pAdapter, ODM_RF_PATH_A, lna_low_gain_3, BIT1, 0x1); /*/ RF LO enabled*/
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
} else { /*/ Turn On SingleTone and turn off the other test modes.*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_SingleTone);
}
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {/*/ Stop Single Ton e.*/
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
phy_set_rf_reg(pAdapter, ODM_RF_PATH_A, lna_low_gain_3, bRFRegOffsetMask, regRF);
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
}
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
}
void hal_mpt_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart)
{
u8 Rate;
pAdapter->mppriv.mpt_ctx.is_carrier_suppression = bStart;
Rate = HwRateToMPTRate(pAdapter->mppriv.rateidx);
if (bStart) {/* Start Carrier Suppression.*/
if (Rate <= MPT_RATE_11M) {
/*/ 1. if CCK block on?*/
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/*set CCK block on*/
/*/Turn Off All Test Mode*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_ALL_OFF);
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /*/transmit mode*/
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x0); /*/turn off scramble setting*/
/*/Set CCK Tx Test Rate*/
write_bbreg(pAdapter, rCCK0_System, bCCKTxRate, 0x0); /*/Set FTxRate to 1Mbps*/
}
/*Set for dynamic set Power index*/
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {/* Stop Carrier Suppression.*/
if (Rate <= MPT_RATE_11M) {
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /*normal mode*/
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /*turn on scramble setting*/
/*BB Reset*/
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
write_bbreg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
}
/*Stop for dynamic set Power index*/
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
}
RTW_INFO("\n MPT_ProSetCarrierSupp() is finished.\n");
}
u32 hal_mpt_query_phytxok(PADAPTER pAdapter)
{
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
RT_PMAC_TX_INFO PMacTxInfo = pMptCtx->PMacTxInfo;
u16 count = 0;
if (IS_MPT_CCK_RATE(PMacTxInfo.TX_RATE))
count = phy_query_bb_reg(pAdapter, 0xF50, bMaskLWord); /* [15:0]*/
else
count = phy_query_bb_reg(pAdapter, 0xF50, bMaskHWord); /* [31:16]*/
if (count > 50000) {
rtw_reset_phy_trx_ok_counters(pAdapter);
pAdapter->mppriv.tx.sended += count;
count = 0;
}
return pAdapter->mppriv.tx.sended + count;
}
static void mpt_StopCckContTx(
PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u1Byte u1bReg;
pMptCtx->bCckContTx = FALSE;
pMptCtx->bOfdmContTx = FALSE;
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /*normal mode*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /*turn on scramble setting*/
/*BB Reset*/
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
} /* mpt_StopCckContTx */
static void mpt_StopOfdmContTx(
PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u1Byte u1bReg;
u4Byte data;
pMptCtx->bCckContTx = FALSE;
pMptCtx->bOfdmContTx = FALSE;
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_ALL_OFF);
rtw_mdelay_os(10);
/*BB Reset*/
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x0);
phy_set_bb_reg(pAdapter, rPMAC_Reset, bBBResetB, 0x1);
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000100);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000100);
} /* mpt_StopOfdmContTx */
static void mpt_StartCckContTx(
PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
u4Byte cckrate;
/* 1. if CCK block on */
if (!phy_query_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn))
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bCCKEn, 1);/*set CCK block on*/
/*Turn Off All Test Mode*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_ALL_OFF);
cckrate = pAdapter->mppriv.rateidx;
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKTxRate, cckrate);
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0x2); /*transmit mode*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /*turn on scramble setting*/
phy_set_bb_reg(pAdapter, 0xa14, 0x300, 0x3); /* 0xa15[1:0] = 11 force cck rxiq = 0*/
phy_set_bb_reg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x1); /* 0xc08[16] = 1 force ofdm rxiq = ofdm txiq*/
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter2, BIT14, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter2, BIT14, 1);
phy_set_bb_reg(pAdapter, 0x0B34, BIT14, 1);
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
pMptCtx->bCckContTx = TRUE;
pMptCtx->bOfdmContTx = FALSE;
} /* mpt_StartCckContTx */
static void mpt_StartOfdmContTx(
PADAPTER pAdapter
)
{
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(pAdapter);
PMPT_CONTEXT pMptCtx = &(pAdapter->mppriv.mpt_ctx);
/* 1. if OFDM block on?*/
if (!phy_query_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
phy_set_bb_reg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 1);/*set OFDM block on*/
/* 2. set CCK test mode off, set to CCK normal mode*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKBBMode, 0);
/* 3. turn on scramble setting*/
phy_set_bb_reg(pAdapter, rCCK0_System, bCCKScramble, 1);
phy_set_bb_reg(pAdapter, 0xa14, 0x300, 0x3); /* 0xa15[1:0] = 2b'11*/
phy_set_bb_reg(pAdapter, rOFDM0_TRMuxPar, 0x10000, 0x1); /* 0xc08[16] = 1*/
/* 4. Turn On Continue Tx and turn off the other test modes.*/
phy_set_bb_reg(pAdapter, rOFDM1_LSTF, BIT30 | BIT29 | BIT28, OFDM_ContinuousTx);
phy_set_bb_reg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
phy_set_bb_reg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
pMptCtx->bCckContTx = FALSE;
pMptCtx->bOfdmContTx = TRUE;
} /* mpt_StartOfdmContTx */
void hal_mpt_SetContinuousTx(PADAPTER pAdapter, u8 bStart)
{
u8 Rate;
RT_TRACE(_module_mp_, _drv_info_,
("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
Rate = HwRateToMPTRate(pAdapter->mppriv.rateidx);
pAdapter->mppriv.mpt_ctx.is_start_cont_tx = bStart;
if (Rate <= MPT_RATE_11M) {
if (bStart)
mpt_StartCckContTx(pAdapter);
else
mpt_StopCckContTx(pAdapter);
} else if (Rate >= MPT_RATE_6M) {
if (bStart)
mpt_StartOfdmContTx(pAdapter);
else
mpt_StopOfdmContTx(pAdapter);
}
}
#endif /* CONFIG_MP_INCLUDE*/