rtl8188eu/include/odm.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
 *                                        
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 *
 ******************************************************************************/


#ifndef	__HALDMOUTSRC_H__
#define __HALDMOUTSRC_H__

//============================================================
// Definition 
//============================================================
//
// 2011/09/22 MH Define all team supprt ability.
//

//
// 2011/09/22 MH Define for all teams. Please Define the constan in your precomp header.
//
//#define		DM_ODM_SUPPORT_AP			0
//#define		DM_ODM_SUPPORT_ADSL			0
//#define		DM_ODM_SUPPORT_CE			0
//#define		DM_ODM_SUPPORT_MP			1

//
// 2011/09/28 MH Define ODM SW team support flag.
//



//
// Antenna Switch Relative Definition.
//

//
// 20100503 Joseph:
// Add new function SwAntDivCheck8192C().
// This is the main function of Antenna diversity function before link.
// Mainly, it just retains last scan result and scan again.
// After that, it compares the scan result to see which one gets better RSSI.
// It selects antenna with better receiving power and returns better scan result.
//
#define	TP_MODE		0
#define	RSSI_MODE		1
#define	TRAFFIC_LOW	0
#define	TRAFFIC_HIGH	1


//============================================================
//3 Tx Power Tracking
//3============================================================
#define		DPK_DELTA_MAPPING_NUM	13
#define		index_mapping_HP_NUM	15	


//============================================================
//3 PSD Handler
//3============================================================

#define	AFH_PSD		1	//0:normal PSD scan, 1: only do 20 pts PSD
#define	MODE_40M		0	//0:20M, 1:40M
#define	PSD_TH2		3  
#define	PSD_CHMIN		20   // Minimum channel number for BT AFH
#define	SIR_STEP_SIZE	3
#define   Smooth_Size_1 	5
#define	Smooth_TH_1	3
#define   Smooth_Size_2 	10
#define	Smooth_TH_2	4
#define   Smooth_Size_3 	20
#define	Smooth_TH_3	4
#define   Smooth_Step_Size 5
#define	Adaptive_SIR	1
#if (RTL8723_FPGA_VERIFICATION == 1)
#define	PSD_RESCAN		1
#else
#define	PSD_RESCAN		4
#endif
#define	PSD_SCAN_INTERVAL	700 //ms



//8723A High Power IGI Setting
#define		DM_DIG_HIGH_PWR_IGI_LOWER_BOUND	0x22
#define  		DM_DIG_Gmode_HIGH_PWR_IGI_LOWER_BOUND 0x28
#define		DM_DIG_HIGH_PWR_THRESHOLD	0x3a

// LPS define
#define DM_DIG_FA_TH0_LPS				4 //-> 4 in lps
#define DM_DIG_FA_TH1_LPS				15 //-> 15 lps
#define DM_DIG_FA_TH2_LPS				30 //-> 30 lps
#define RSSI_OFFSET_DIG					0x05;

//ANT Test
#define 		ANTTESTALL		0x00		//Ant A or B will be Testing   
#define		ANTTESTA		0x01		//Ant A will be Testing	
#define		ANTTESTB		0x02		//Ant B will be testing


//============================================================
// structure and define
//============================================================

//
// 2011/09/20 MH Add for AP/ADSLpseudo DM structuer requirement.
// We need to remove to other position???
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
typedef		struct rtl8192cd_priv {
	u1Byte		temp;

}rtl8192cd_priv, *prtl8192cd_priv;
#endif


#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
typedef		struct _ADAPTER{
	u1Byte		temp;
	#ifdef AP_BUILD_WORKAROUND
	HAL_DATA_TYPE*		temp2;
	prtl8192cd_priv		priv;
	#endif
}ADAPTER, *PADAPTER;
#endif

#if (DM_ODM_SUPPORT_TYPE == ODM_AP)

typedef		struct _WLAN_STA{
	u1Byte		temp;
} WLAN_STA, *PRT_WLAN_STA;

#endif

typedef struct _Dynamic_Initial_Gain_Threshold_
{
	u1Byte		Dig_Enable_Flag;
	u1Byte		Dig_Ext_Port_Stage;
	
	int		   	RssiLowThresh;
	int		    	RssiHighThresh;

	u4Byte		FALowThresh;
	u4Byte		FAHighThresh;

	u1Byte		CurSTAConnectState;
	u1Byte		PreSTAConnectState;
	u1Byte		CurMultiSTAConnectState;

	u1Byte		PreIGValue;
	u1Byte		CurIGValue;
	u1Byte		BackupIGValue;

	s1Byte		BackoffVal;
	s1Byte		BackoffVal_range_max;
	s1Byte		BackoffVal_range_min;
	u1Byte		rx_gain_range_max;
	u1Byte		rx_gain_range_min;
	u1Byte		Rssi_val_min;

	u1Byte		PreCCK_CCAThres;
	u1Byte		CurCCK_CCAThres;
	u1Byte		PreCCKPDState;
	u1Byte		CurCCKPDState;

	u1Byte		LargeFAHit;
	u1Byte		ForbiddenIGI;
	u4Byte		Recover_cnt;

	u1Byte		DIG_Dynamic_MIN_0;
	u1Byte		DIG_Dynamic_MIN_1;
	BOOLEAN		bMediaConnect_0;
	BOOLEAN		bMediaConnect_1;

	u4Byte		AntDiv_RSSI_max;
	u4Byte		RSSI_max;
}DIG_T,*pDIG_T;

typedef struct _Dynamic_Power_Saving_
{
	u1Byte		PreCCAState;
	u1Byte		CurCCAState;

	u1Byte		PreRFState;
	u1Byte		CurRFState;

	int		    Rssi_val_min;
	
	u1Byte		initialize;
	u4Byte		Reg874,RegC70,Reg85C,RegA74;
	
}PS_T,*pPS_T;

typedef struct _FALSE_ALARM_STATISTICS{
	u4Byte	Cnt_Parity_Fail;
	u4Byte	Cnt_Rate_Illegal;
	u4Byte	Cnt_Crc8_fail;
	u4Byte	Cnt_Mcs_fail;
	u4Byte	Cnt_Ofdm_fail;
	u4Byte	Cnt_Cck_fail;
	u4Byte	Cnt_all;
	u4Byte	Cnt_Fast_Fsync;
	u4Byte	Cnt_SB_Search_fail;
	u4Byte	Cnt_OFDM_CCA;
	u4Byte	Cnt_CCK_CCA;
	u4Byte	Cnt_CCA_all;
	u4Byte	Cnt_BW_USC;	//Gary
	u4Byte	Cnt_BW_LSC;	//Gary
}FALSE_ALARM_STATISTICS, *PFALSE_ALARM_STATISTICS;

typedef struct _Dynamic_Primary_CCA{
	u1Byte		PriCCA_flag;
	u1Byte		intf_flag;
	u1Byte		intf_type;  
	u1Byte		DupRTS_flag;
	u1Byte		Monitor_flag;
}Pri_CCA_T, *pPri_CCA_T;
	
typedef struct _RX_High_Power_
{
	u1Byte		RXHP_flag;
	u1Byte		PSD_func_trigger;
	u1Byte		PSD_bitmap_RXHP[80];
	u1Byte		Pre_IGI;
	u1Byte		Cur_IGI;
	u1Byte		Pre_pw_th;
	u1Byte		Cur_pw_th;
	BOOLEAN		First_time_enter;
	BOOLEAN		RXHP_enable;
	u1Byte		TP_Mode;
	RT_TIMER	PSDTimer;
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)	
	#if USE_WORKITEM
	RT_WORK_ITEM		PSDTimeWorkitem;
	#endif
#endif

}RXHP_T, *pRXHP_T;

#if (DM_ODM_SUPPORT_TYPE & (ODM_CE))
#define ASSOCIATE_ENTRY_NUM					32 // Max size of AsocEntry[].
#define	ODM_ASSOCIATE_ENTRY_NUM				ASSOCIATE_ENTRY_NUM

#elif (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define ASSOCIATE_ENTRY_NUM					NUM_STAT
#define	ODM_ASSOCIATE_ENTRY_NUM				ASSOCIATE_ENTRY_NUM+1

#else
//
// 2012/01/12 MH Revise for compatiable with other SW team. 
// 0 is for STA 1-n is for AP clients.
//
#define ODM_ASSOCIATE_ENTRY_NUM				ASSOCIATE_ENTRY_NUM+1// Default port only one
#endif

//#ifdef CONFIG_ANTENNA_DIVERSITY
// This indicates two different the steps. 
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK		0
#define SWAW_STEP_DETERMINE	1

#define	TP_MODE		0
#define	RSSI_MODE		1
#define	TRAFFIC_LOW	0
#define	TRAFFIC_HIGH	1

typedef struct _SW_Antenna_Switch_
{
	u1Byte		try_flag;
	s4Byte		PreRSSI;
	u1Byte		CurAntenna;
	u1Byte		PreAntenna;
	u1Byte		RSSI_Trying;
	u1Byte		TestMode;
	u1Byte		bTriggerAntennaSwitch;
	u1Byte		SelectAntennaMap;
	u1Byte		RSSI_target;	

	// Before link Antenna Switch check
	u1Byte		SWAS_NoLink_State;
	u4Byte		SWAS_NoLink_BK_Reg860;
	BOOLEAN		ANTA_ON;	//To indicate Ant A is or not
	BOOLEAN		ANTB_ON;	//To indicate Ant B is on or not

	s4Byte		RSSI_sum_A;
	s4Byte		RSSI_sum_B;
	s4Byte		RSSI_cnt_A;
	s4Byte		RSSI_cnt_B;

	u8Byte		lastTxOkCnt;
	u8Byte		lastRxOkCnt;
	u8Byte 		TXByteCnt_A;
	u8Byte 		TXByteCnt_B;
	u8Byte 		RXByteCnt_A;
	u8Byte 		RXByteCnt_B;
	u1Byte 		TrafficLoad;
	RT_TIMER 	SwAntennaSwitchTimer;
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)	
	#if USE_WORKITEM
	RT_WORK_ITEM			SwAntennaSwitchWorkitem;
	#endif
#endif
/* CE Platform use
#ifdef CONFIG_SW_ANTENNA_DIVERSITY
	_timer SwAntennaSwitchTimer; 
	u8Byte lastTxOkCnt;
	u8Byte lastRxOkCnt;
	u8Byte TXByteCnt_A;
	u8Byte TXByteCnt_B;
	u8Byte RXByteCnt_A;
	u8Byte RXByteCnt_B;
	u1Byte DoubleComfirm;
	u1Byte TrafficLoad;
	//SW Antenna Switch


#endif
*/
#ifdef CONFIG_HW_ANTENNA_DIVERSITY
	//Hybrid Antenna Diversity
	u4Byte		CCK_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
	u4Byte		CCK_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
	u4Byte		OFDM_Ant1_Cnt[ASSOCIATE_ENTRY_NUM];
	u4Byte		OFDM_Ant2_Cnt[ASSOCIATE_ENTRY_NUM];
	u4Byte		RSSI_Ant1_Sum[ASSOCIATE_ENTRY_NUM];
	u4Byte		RSSI_Ant2_Sum[ASSOCIATE_ENTRY_NUM];
	u1Byte		TxAnt[ASSOCIATE_ENTRY_NUM];
	u1Byte		TargetSTA;
	u1Byte		antsel;
	u1Byte		RxIdleAnt;

#endif
	
}SWAT_T, *pSWAT_T;
//#endif

typedef struct _EDCA_TURBO_
{
	BOOLEAN bCurrentTurboEDCA;
	BOOLEAN bIsCurRDLState;
	#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
	u4Byte	prv_traffic_idx; // edca turbo
	#endif

}EDCA_T,*pEDCA_T;

typedef struct _ODM_RATE_ADAPTIVE
{
	u1Byte				Type;				// DM_Type_ByFW/DM_Type_ByDriver
	u1Byte				HighRSSIThresh;		// if RSSI > HighRSSIThresh	=> RATRState is DM_RATR_STA_HIGH
	u1Byte				LowRSSIThresh;		// if RSSI <= LowRSSIThresh	=> RATRState is DM_RATR_STA_LOW
	u1Byte				RATRState;			// Current RSSI level, DM_RATR_STA_HIGH/DM_RATR_STA_MIDDLE/DM_RATR_STA_LOW
	u4Byte				LastRATR;			// RATR Register Content

} ODM_RATE_ADAPTIVE, *PODM_RATE_ADAPTIVE;


#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))


#ifdef ADSL_AP_BUILD_WORKAROUND
#define MAX_TOLERANCE			5
#define IQK_DELAY_TIME			1		//ms
#endif

//
// Indicate different AP vendor for IOT issue.
//
typedef enum _HT_IOT_PEER
{
	HT_IOT_PEER_UNKNOWN 			= 0,
	HT_IOT_PEER_REALTEK 			= 1,
	HT_IOT_PEER_REALTEK_92SE 		= 2,
	HT_IOT_PEER_BROADCOM 		= 3,
	HT_IOT_PEER_RALINK 			= 4,
	HT_IOT_PEER_ATHEROS 			= 5,
	HT_IOT_PEER_CISCO 				= 6,
	HT_IOT_PEER_MERU 				= 7,	
	HT_IOT_PEER_MARVELL 			= 8,
	HT_IOT_PEER_REALTEK_SOFTAP 	= 9,// peer is RealTek SOFT_AP, by Bohn, 2009.12.17
	HT_IOT_PEER_SELF_SOFTAP 		= 10, // Self is SoftAP
	HT_IOT_PEER_AIRGO 				= 11,
	HT_IOT_PEER_INTEL 				= 12, 
	HT_IOT_PEER_RTK_APCLIENT 		= 13, 
	HT_IOT_PEER_REALTEK_81XX 		= 14,	
	HT_IOT_PEER_REALTEK_WOW 		= 15,	
	HT_IOT_PEER_MAX 				= 16
}HT_IOT_PEER_E, *PHTIOT_PEER_E;
#endif//#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))



#define IQK_MAC_REG_NUM		4
#define IQK_ADDA_REG_NUM		16
#define IQK_BB_REG_NUM_MAX	10
#if (RTL8192D_SUPPORT==1) 
#define IQK_BB_REG_NUM		10
#else
#define IQK_BB_REG_NUM		9
#endif
#define HP_THERMAL_NUM		8

#define AVG_THERMAL_NUM		8
#define IQK_Matrix_REG_NUM	8
#define IQK_Matrix_Settings_NUM	1+24+21

#define		DM_Type_ByFW			0
#define		DM_Type_ByDriver		1

//
// Declare for common info
//
// Declare for common info
//
#define MAX_PATH_NUM_92CS		2

typedef struct _ODM_Phy_Status_Info_
{	
	u1Byte		RxPWDBAll;	
	u1Byte		SignalQuality;	 // in 0-100 index. 
	u1Byte		RxMIMOSignalQuality[MAX_PATH_NUM_92CS]; //EVM
	u1Byte		RxMIMOSignalStrength[MAX_PATH_NUM_92CS];// in 0~100 index
#if (DM_ODM_SUPPORT_TYPE &  (ODM_MP|ODM_CE))
	s1Byte		RxPower; // in dBm Translate from PWdB
	s1Byte		RecvSignalPower;// Real power in dBm for this packet, no beautification and aggregation. Keep this raw info to be used for the other procedures.
	u1Byte		BTRxRSSIPercentage;	
	u1Byte		SignalStrength; // in 0-100 index.
	u1Byte		RxPwr[MAX_PATH_NUM_92CS];//per-path's pwdb
#endif
	u1Byte		RxSNR[MAX_PATH_NUM_92CS];//per-path's SNR	
}ODM_PHY_INFO_T,*PODM_PHY_INFO_T;


typedef struct _ODM_Phy_Dbg_Info_
{
	//ODM Write,debug info
	s1Byte		RxSNRdB[MAX_PATH_NUM_92CS];
	u8Byte		NumQryPhyStatus;
	u8Byte		NumQryPhyStatusCCK;
	u8Byte		NumQryPhyStatusOFDM;
	//Others
	s4Byte		RxEVM[MAX_PATH_NUM_92CS];	
	
}ODM_PHY_DBG_INFO_T;

typedef struct _ODM_Per_Pkt_Info_
{
	u1Byte		Rate;	
	u1Byte		StationID;
	BOOLEAN		bPacketMatchBSSID;
	BOOLEAN		bPacketToSelf;
	BOOLEAN		bPacketBeacon;
}ODM_PACKET_INFO_T,*PODM_PACKET_INFO_T;

typedef struct _ODM_Mac_Status_Info_
{
	u1Byte	test;
	
}ODM_MAC_INFO;


typedef enum tag_Dynamic_ODM_Support_Ability_Type
{
	// BB Team
	ODM_DIG				= 0x00000001,
	ODM_HIGH_POWER		= 0x00000002,
	ODM_CCK_CCA_TH		= 0x00000004,
	ODM_FA_STATISTICS		= 0x00000008,
	ODM_RAMASK			= 0x00000010,
	ODM_RSSI_MONITOR		= 0x00000020,
	ODM_SW_ANTDIV		= 0x00000040,
	ODM_HW_ANTDIV		= 0x00000080,
	ODM_BB_PWRSV			= 0x00000100,
	ODM_2TPATHDIV			= 0x00000200,
	ODM_1TPATHDIV			= 0x00000400,
	ODM_PSD2AFH			= 0x00000800
}ODM_Ability_E;

//
// 2011/20/20 MH For MP driver RT_WLAN_STA =  STA_INFO_T
// Please declare below ODM relative info in your STA info structure.
//
#if 1
typedef		struct _ODM_STA_INFO{
	// Driver Write
	BOOLEAN		bUsed;				// record the sta status link or not?
	//u1Byte		WirelessMode;		// 
	u1Byte		IOTPeer;			// Enum value.	HT_IOT_PEER_E

	// ODM Write
	//1 PHY_STATUS_INFO
	u1Byte		RSSI_Path[4];		// 
	u1Byte		RSSI_Ave;
	u1Byte		RXEVM[4];
	u1Byte		RXSNR[4];

	//
	// 	Please use compile flag to disable the struictrue for other IC except 88E.
	//	Move To lower layer.
	//
	// ODM Write Wilson will handle this part(said by Luke.Lee)

}ODM_STA_INFO_T, *PODM_STA_INFO_T;
#endif

//
// 2011/10/20 MH Define Common info enum for all team.
//
typedef enum _ODM_Common_Info_Definition
{
//-------------REMOVED CASE-----------//
	//ODM_CMNINFO_CCK_HP,
	//ODM_CMNINFO_RFPATH_ENABLE,		// Define as ODM write???	
	//ODM_CMNINFO_BT_COEXIST,				// ODM_BT_COEXIST_E
	//ODM_CMNINFO_OP_MODE,				// ODM_OPERATION_MODE_E
//-------------REMOVED CASE-----------//

	//
	// Fixed value:
	//

	//-----------HOOK BEFORE REG INIT-----------//
	ODM_CMNINFO_PLATFORM = 0,
	ODM_CMNINFO_ABILITY,					// ODM_ABILITY_E
	ODM_CMNINFO_INTERFACE,				// ODM_INTERFACE_E
	ODM_CMNINFO_MP_TEST_CHIP,
	ODM_CMNINFO_IC_TYPE,					// ODM_IC_TYPE_E
	ODM_CMNINFO_CUT_VER,					// ODM_CUT_VERSION_E
	ODM_CMNINFO_FAB_VER,					// ODM_FAB_E
	ODM_CMNINFO_RF_TYPE,					// ODM_RF_PATH_E or ODM_RF_TYPE_E?
	ODM_CMNINFO_BOARD_TYPE,				// ODM_BOARD_TYPE_E
	ODM_CMNINFO_EXT_LNA,					// TRUE
	ODM_CMNINFO_EXT_PA,
	ODM_CMNINFO_EXT_TRSW,
	ODM_CMNINFO_PATCH_ID,				//CUSTOMER ID
	ODM_CMNINFO_BINHCT_TEST,
	ODM_CMNINFO_BWIFI_TEST,
	ODM_CMNINFO_SMART_CONCURRENT,
	//-----------HOOK BEFORE REG INIT-----------//	


	//
	// Dynamic value:
	//
//--------- POINTER REFERENCE-----------//
	ODM_CMNINFO_MAC_PHY_MODE,			// ODM_MAC_PHY_MODE_E
	ODM_CMNINFO_TX_UNI,
	ODM_CMNINFO_RX_UNI,
	ODM_CMNINFO_WM_MODE,				// ODM_WIRELESS_MODE_E
	ODM_CMNINFO_BAND,					// ODM_BAND_TYPE_E
	ODM_CMNINFO_SEC_CHNL_OFFSET,		// ODM_SEC_CHNL_OFFSET_E
	ODM_CMNINFO_SEC_MODE,				// ODM_SECURITY_E
	ODM_CMNINFO_BW,						// ODM_BW_E
	ODM_CMNINFO_CHNL,
	
	ODM_CMNINFO_DMSP_GET_VALUE,
	ODM_CMNINFO_BUDDY_ADAPTOR,
	ODM_CMNINFO_DMSP_IS_MASTER,
	ODM_CMNINFO_SCAN,
	ODM_CMNINFO_POWER_SAVING,
	ODM_CMNINFO_ONE_PATH_CCA,			// ODM_CCA_PATH_E
	ODM_CMNINFO_DRV_STOP,
	ODM_CMNINFO_PNP_IN,
	ODM_CMNINFO_INIT_ON,
	ODM_CMNINFO_ANT_TEST,
	ODM_CMNINFO_NET_CLOSED,
	ODM_CMNINFO_MP_MODE,
//--------- POINTER REFERENCE-----------//

//------------CALL BY VALUE-------------//
	ODM_CMNINFO_WIFI_DIRECT,
	ODM_CMNINFO_WIFI_DISPLAY,
	ODM_CMNINFO_LINK,
	ODM_CMNINFO_RSSI_MIN,
	ODM_CMNINFO_DBG_COMP,				// u8Byte
	ODM_CMNINFO_DBG_LEVEL,				// u4Byte
	ODM_CMNINFO_RA_THRESHOLD_HIGH,		// u1Byte
	ODM_CMNINFO_RA_THRESHOLD_LOW,		// u1Byte
	ODM_CMNINFO_RF_ANTENNA_TYPE,		// u1Byte
	ODM_CMNINFO_BT_DISABLED,
	ODM_CMNINFO_BT_OPERATION,
	ODM_CMNINFO_BT_DIG,
	ODM_CMNINFO_BT_BUSY,					//Check Bt is using or not//neil
	ODM_CMNINFO_BT_DISABLE_EDCA,
//------------CALL BY VALUE-------------//

	//
	// Dynamic ptr array hook itms.
	//
	ODM_CMNINFO_STA_STATUS,
	ODM_CMNINFO_PHY_STATUS,
	ODM_CMNINFO_MAC_STATUS,
	
	ODM_CMNINFO_MAX,


}ODM_CMNINFO_E;

//
// 2011/10/20 MH Define ODM support ability.  ODM_CMNINFO_ABILITY
//
typedef enum _ODM_Support_Ability_Definition
{
	//
	// BB ODM section BIT 0-15
	//
	ODM_BB_DIG					= BIT0,
	ODM_BB_RA_MASK				= BIT1,
	ODM_BB_DYNAMIC_TXPWR		= BIT2,
	ODM_BB_FA_CNT					= BIT3,
	ODM_BB_RSSI_MONITOR			= BIT4,
	ODM_BB_CCK_PD					= BIT5,
	ODM_BB_ANT_DIV				= BIT6,
	ODM_BB_PWR_SAVE				= BIT7,
	ODM_BB_PWR_TRAIN				= BIT8,
	ODM_BB_RATE_ADAPTIVE			= BIT9,
	ODM_BB_PATH_DIV				= BIT10,
	ODM_BB_PSD					= BIT11,
	ODM_BB_RXHP					= BIT12,
	
	//
	// MAC DM section BIT 16-23
	//
	ODM_MAC_EDCA_TURBO			= BIT16,
	ODM_MAC_EARLY_MODE			= BIT17,
	
	//
	// RF ODM section BIT 24-31
	//
	ODM_RF_TX_PWR_TRACK			= BIT24,
	ODM_RF_RX_GAIN_TRACK			= BIT25,
	ODM_RF_CALIBRATION				= BIT26,
	
}ODM_ABILITY_E;

//	ODM_CMNINFO_INTERFACE
typedef enum tag_ODM_Support_Interface_Definition
{
	ODM_ITRF_PCIE 	=	0x1,
	ODM_ITRF_USB 	=	0x2,
	ODM_ITRF_SDIO 	=	0x4,
	ODM_ITRF_ALL 	=	0x7,
}ODM_INTERFACE_E;

// ODM_CMNINFO_IC_TYPE
typedef enum tag_ODM_Support_IC_Type_Definition
{
	ODM_RTL8192S 	=	BIT0,
	ODM_RTL8192C 	=	BIT1,
	ODM_RTL8192D 	=	BIT2,
	ODM_RTL8723A 	=	BIT3,
	ODM_RTL8188E 	=	BIT4,
	ODM_RTL8812 	=	BIT5,
	ODM_RTL8821 	=	BIT6,
}ODM_IC_TYPE_E;

#define ODM_IC_11N_SERIES		(ODM_RTL8192S|ODM_RTL8192C|ODM_RTL8192D|ODM_RTL8723A|ODM_RTL8188E)
#define ODM_IC_11AC_SERIES		(ODM_RTL8812)

//ODM_CMNINFO_CUT_VER
typedef enum tag_ODM_Cut_Version_Definition
{
	ODM_CUT_A 		=	1,
	ODM_CUT_B 		=	2,
	ODM_CUT_C 		=	3,
	ODM_CUT_D 		=	4,
	ODM_CUT_E 		=	5,
	ODM_CUT_F 		=	6,
	ODM_CUT_TEST 	=	7,
}ODM_CUT_VERSION_E;

// ODM_CMNINFO_FAB_VER
typedef enum tag_ODM_Fab_Version_Definition
{
	ODM_TSMC 	=	0,
	ODM_UMC 	=	1,
}ODM_FAB_E;

// ODM_CMNINFO_RF_TYPE
//
// For example 1T2R (A+AB = BIT0|BIT4|BIT5)
//
typedef enum tag_ODM_RF_Path_Bit_Definition
{
	ODM_RF_TX_A 	=	BIT0,
	ODM_RF_TX_B 	=	BIT1,
	ODM_RF_TX_C	=	BIT2,
	ODM_RF_TX_D	=	BIT3,
	ODM_RF_RX_A	=	BIT4,
	ODM_RF_RX_B	=	BIT5,
	ODM_RF_RX_C	=	BIT6,
	ODM_RF_RX_D	=	BIT7,
}ODM_RF_PATH_E;


typedef enum tag_ODM_RF_Type_Definition
{
	ODM_1T1R 	=	0,
	ODM_1T2R 	=	1,
	ODM_2T2R	=	2,
	ODM_2T3R	=	3,
	ODM_2T4R	=	4,
	ODM_3T3R	=	5,
	ODM_3T4R	=	6,
	ODM_4T4R	=	7,
}ODM_RF_TYPE_E;


//
// ODM Dynamic common info value definition
//

//typedef enum _MACPHY_MODE_8192D{
//	SINGLEMAC_SINGLEPHY,
//	DUALMAC_DUALPHY,
//	DUALMAC_SINGLEPHY,
//}MACPHY_MODE_8192D,*PMACPHY_MODE_8192D;
// Above is the original define in MP driver. Please use the same define. THX.
typedef enum tag_ODM_MAC_PHY_Mode_Definition
{
	ODM_SMSP	= 0,
	ODM_DMSP	= 1,
	ODM_DMDP	= 2,
}ODM_MAC_PHY_MODE_E;


typedef enum tag_BT_Coexist_Definition
{	
	ODM_BT_BUSY 		= 1,
	ODM_BT_ON 			= 2,
	ODM_BT_OFF 		= 3,
	ODM_BT_NONE 		= 4,
}ODM_BT_COEXIST_E;

// ODM_CMNINFO_OP_MODE
typedef enum tag_Operation_Mode_Definition
{
	ODM_NO_LINK 		= BIT0,
	ODM_LINK 			= BIT1,
	ODM_SCAN 			= BIT2,
	ODM_POWERSAVE 	= BIT3,
	ODM_AP_MODE 		= BIT4,
	ODM_CLIENT_MODE	= BIT5,
	ODM_AD_HOC 		= BIT6,
	ODM_WIFI_DIRECT	= BIT7,
	ODM_WIFI_DISPLAY	= BIT8,
}ODM_OPERATION_MODE_E;

// ODM_CMNINFO_WM_MODE
typedef enum tag_Wireless_Mode_Definition
{
	ODM_WM_UNKNOW	= 0x0,
	ODM_WM_B			= BIT0,
	ODM_WM_G			= BIT1,
	ODM_WM_A			= BIT2,
	ODM_WM_N24G		= BIT3,
	ODM_WM_N5G		= BIT4,
	ODM_WM_AUTO		= BIT5,
	ODM_WM_AC		= BIT6,
}ODM_WIRELESS_MODE_E;

// ODM_CMNINFO_BAND
typedef enum tag_Band_Type_Definition
{
	ODM_BAND_2_4G 	= BIT0,
	ODM_BAND_5G 		= BIT1,

}ODM_BAND_TYPE_E;

// ODM_CMNINFO_SEC_CHNL_OFFSET
typedef enum tag_Secondary_Channel_Offset_Definition
{
	ODM_DONT_CARE 	= 0,
	ODM_BELOW 		= 1,
	ODM_ABOVE 			= 2
}ODM_SEC_CHNL_OFFSET_E;

// ODM_CMNINFO_SEC_MODE
typedef enum tag_Security_Definition
{
	ODM_SEC_OPEN 			= 0,
	ODM_SEC_WEP40 		= 1,
	ODM_SEC_TKIP 			= 2,
	ODM_SEC_RESERVE 		= 3,
	ODM_SEC_AESCCMP 		= 4,
	ODM_SEC_WEP104 		= 5,
	ODM_WEP_WPA_MIXED    = 6, // WEP + WPA
	ODM_SEC_SMS4 			= 7,
}ODM_SECURITY_E;

// ODM_CMNINFO_BW
typedef enum tag_Bandwidth_Definition
{	
	ODM_BW20M 		= 0,
	ODM_BW40M 		= 1,
	ODM_BW80M 		= 2,
	ODM_BW160M 		= 3,
	ODM_BW10M 		= 4,
}ODM_BW_E;

// ODM_CMNINFO_CHNL

// ODM_CMNINFO_BOARD_TYPE
typedef enum tag_Board_Definition
{
	ODM_BOARD_NORMAL 	= 0,
	ODM_BOARD_HIGHPWR	= 1,
	ODM_BOARD_MINICARD 	= 2,
	ODM_BOARD_SLIM		= 3,
	ODM_BOARD_COMBO		= 4,
	
}ODM_BOARD_TYPE_E;

// ODM_CMNINFO_ONE_PATH_CCA
typedef enum tag_CCA_Path
{
	ODM_CCA_2R			= 0,
	ODM_CCA_1R_A			= 1,
	ODM_CCA_1R_B			= 2,	
}ODM_CCA_PATH_E;


typedef struct _ODM_RA_Info_
{
	u1Byte RateID;
	u4Byte RateMask;
	u4Byte RAUseRate;
	u1Byte RateSGI;
	u1Byte RssiStaRA;
	u1Byte PreRssiStaRA;
	u1Byte SGIEnable;
	u1Byte DecisionRate;
	u1Byte PreRate;
	u1Byte HighestRate;
	u1Byte LowestRate;
	u4Byte NscUp;
	u4Byte NscDown;
	u2Byte RTY[5];
	u4Byte TOTAL;
	u2Byte DROP;
	u1Byte Active;
	u2Byte RptTime;
	u1Byte RAWaitingCounter;
	u1Byte RAPendingCounter;	
#if 1 //POWER_TRAINING_ACTIVE == 1 // For compile  pass only~!
	u1Byte PTActive;  // on or off
	u1Byte PTTryState;  // 0 trying state, 1 for decision state
	u1Byte PTStage;  // 0~6
	u1Byte PTStopCount; //Stop PT counter
	u1Byte PTPreRate;  // if rate change do PT
	u1Byte PTPreRssi; // if RSSI change 5% do PT
	u1Byte PTModeSS;  // decide whitch rate should do PT
	u1Byte RAstage;  // StageRA, decide how many times RA will be done between PT
	u1Byte PTSmoothFactor;
#endif
} ODM_RA_INFO_T,*PODM_RA_INFO_T;

typedef struct _IQK_MATRIX_REGS_SETTING{
	BOOLEAN 	bIQKDone;
	s4Byte		Value[1][IQK_Matrix_REG_NUM];
}IQK_MATRIX_REGS_SETTING,*PIQK_MATRIX_REGS_SETTING;

#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
typedef struct _PathDiv_Parameter_define_
{
	u4Byte org_5g_RegE30;
	u4Byte org_5g_RegC14;
	u4Byte org_5g_RegCA0;
	u4Byte swt_5g_RegE30;
	u4Byte swt_5g_RegC14;
	u4Byte swt_5g_RegCA0;
	//for 2G IQK information
	u4Byte org_2g_RegC80;
	u4Byte org_2g_RegC4C;
	u4Byte org_2g_RegC94;
	u4Byte org_2g_RegC14;
	u4Byte org_2g_RegCA0;

	u4Byte swt_2g_RegC80;
	u4Byte swt_2g_RegC4C;
	u4Byte swt_2g_RegC94;
	u4Byte swt_2g_RegC14;
	u4Byte swt_2g_RegCA0;
}PATHDIV_PARA,*pPATHDIV_PARA;
#endif


typedef struct ODM_RF_Calibration_Structure
{
	//for tx power tracking
	
	u4Byte	RegA24; // for TempCCK
	s4Byte	RegE94;
	s4Byte 	RegE9C;
	s4Byte	RegEB4;
	s4Byte	RegEBC;	

	//u1Byte bTXPowerTracking;
	u1Byte  	TXPowercount;
	BOOLEAN bTXPowerTrackingInit; 
	BOOLEAN bTXPowerTracking;
	u1Byte  	TxPowerTrackControl; //for mp mode, turn off txpwrtracking as default
	u1Byte  	TM_Trigger;
    	u1Byte  	InternalPA5G[2];	//pathA / pathB
	
	u1Byte  	ThermalMeter[2];    // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
	u1Byte  	ThermalValue;
	u1Byte  	ThermalValue_LCK;
	u1Byte  	ThermalValue_IQK;
	u1Byte	ThermalValue_DPK;		
	u1Byte	ThermalValue_AVG[AVG_THERMAL_NUM];
	u1Byte	ThermalValue_AVG_index;		
	u1Byte	ThermalValue_RxGain;
	u1Byte	ThermalValue_Crystal;
	u1Byte	ThermalValue_DPKstore;
	u1Byte	ThermalValue_DPKtrack;
	BOOLEAN	TxPowerTrackingInProgress;
	BOOLEAN	bDPKenable;
	
	BOOLEAN	bReloadtxpowerindex;	
	u1Byte 	bRfPiEnable;
	u4Byte 	TXPowerTrackingCallbackCnt; //cosa add for debug

	u1Byte 	bCCKinCH14;
	u1Byte 	CCK_index;
	u1Byte 	OFDM_index[2];
	BOOLEAN bDoneTxpower;
		
	u1Byte 	ThermalValue_HP[HP_THERMAL_NUM];
	u1Byte 	ThermalValue_HP_index;
	IQK_MATRIX_REGS_SETTING IQKMatrixRegSetting[IQK_Matrix_Settings_NUM];

	u1Byte	Delta_IQK;
	u1Byte	Delta_LCK;
	
	//for IQK	
	u4Byte 	RegC04;
	u4Byte 	Reg874;
	u4Byte 	RegC08;
	u4Byte 	RegB68;
	u4Byte 	RegB6C;
	u4Byte 	Reg870;
	u4Byte 	Reg860;
	u4Byte 	Reg864;
	
	BOOLEAN	bIQKInitialized;
	BOOLEAN bLCKInProgress;
	BOOLEAN	bAntennaDetected;
	u4Byte	ADDA_backup[IQK_ADDA_REG_NUM];
	u4Byte	IQK_MAC_backup[IQK_MAC_REG_NUM];
	u4Byte	IQK_BB_backup_recover[9];
	u4Byte	IQK_BB_backup[IQK_BB_REG_NUM];	

	//for APK
	u4Byte 	APKoutput[2][2]; //path A/B; output1_1a/output1_2a
	u1Byte 	bAPKdone;
	u1Byte 	bAPKThermalMeterIgnore;
	u1Byte 	bDPdone;
	u1Byte 	bDPPathAOK;
	u1Byte 	bDPPathBOK;
}ODM_RF_CAL_T,*PODM_RF_CAL_T;
//
// ODM Dynamic common info value definition
//

typedef struct _FAST_ANTENNA_TRAINNING_
{
	u1Byte	Bssid[6];
	u1Byte	antsel_rx_keep_0;
	u1Byte	antsel_rx_keep_1;
	u1Byte	antsel_rx_keep_2;
	u4Byte	antSumRSSI[7];
	u4Byte	antRSSIcnt[7];
	u4Byte	antAveRSSI[7];
	u1Byte	FAT_State;
	u4Byte	TrainIdx;
	u1Byte	antsel_a[ODM_ASSOCIATE_ENTRY_NUM];
	u1Byte	antsel_b[ODM_ASSOCIATE_ENTRY_NUM];
	u1Byte	antsel_c[ODM_ASSOCIATE_ENTRY_NUM];
	u4Byte	MainAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
	u4Byte	AuxAnt_Sum[ODM_ASSOCIATE_ENTRY_NUM];
	u4Byte	MainAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u4Byte	AuxAnt_Cnt[ODM_ASSOCIATE_ENTRY_NUM];
	u1Byte	RxIdleAnt;
	BOOLEAN		bBecomeLinked;

}FAT_T,*pFAT_T;

typedef enum _FAT_STATE
{
	FAT_NORMAL_STATE			= 0,
	FAT_TRAINING_STATE 		= 1,
}FAT_STATE_E, *PFAT_STATE_E;

typedef enum _ANT_DIV_TYPE
{
	NO_ANTDIV					= 0xFF,	
	CG_TRX_HW_ANTDIV			= 0x01,
	CGCS_RX_HW_ANTDIV 		= 0x02,
	FIXED_HW_ANTDIV         		= 0x03,
	CG_TRX_SMART_ANTDIV		= 0x04,
	CGCS_RX_SW_ANTDIV		= 0x05,
	
}ANT_DIV_TYPE_E, *PANT_DIV_TYPE_E;













//
// 2011/09/22 MH Copy from SD4 defined structure. We use to support PHY DM integration.
//
#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
#if (RT_PLATFORM != PLATFORM_LINUX)
typedef 
#endif
struct DM_Out_Source_Dynamic_Mechanism_Structure
#else// for AP,ADSL,CE Team
typedef  struct DM_Out_Source_Dynamic_Mechanism_Structure
#endif
{
	//RT_TIMER 	FastAntTrainingTimer;
	//
	//	Add for different team use temporarily
	//
	PADAPTER		Adapter;		// For CE/NIC team
	prtl8192cd_priv	priv;			// For AP/ADSL team
	// WHen you use Adapter or priv pointer, you must make sure the pointer is ready.
	BOOLEAN			odm_ready;

#if (DM_ODM_SUPPORT_TYPE & (ODM_CE|ODM_MP))
	rtl8192cd_priv		fake_priv;
#endif
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
	// ADSL_AP_BUILD_WORKAROUND
	ADAPTER			fake_adapter;
#endif

	u8Byte			DebugComponents;
	u4Byte			DebugLevel;
	
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//
	BOOLEAN			bCckHighPower; 
	u1Byte			RFPathRxEnable;		// ODM_CMNINFO_RFPATH_ENABLE
	u1Byte			ControlChannel;
//------ ODM HANDLE, DRIVER NEEDS NOT TO HOOK------//

//--------REMOVED COMMON INFO----------//
	//u1Byte				PseudoMacPhyMode;
	//BOOLEAN			*BTCoexist;
	//BOOLEAN			PseudoBtCoexist;
	//u1Byte				OPMode;
	//BOOLEAN			bAPMode;
	//BOOLEAN			bClientMode;
	//BOOLEAN			bAdHocMode;
	//BOOLEAN			bSlaveOfDMSP;
//--------REMOVED COMMON INFO----------//


//1  COMMON INFORMATION

	//
	// Init Value
	//
//-----------HOOK BEFORE REG INIT-----------//	
	// ODM Platform info AP/ADSL/CE/MP = 1/2/3/4
	u1Byte			SupportPlatform;		
	// ODM Support Ability DIG/RATR/TX_PWR_TRACK/ <20>K<EFBFBD>K = 1/2/3/<2F>K
	u4Byte			SupportAbility;
	// ODM PCIE/USB/SDIO/GSPI = 0/1/2/3
	u1Byte			SupportInterface;			
	// ODM composite or independent. Bit oriented/ 92C+92D+ .... or any other type = 1/2/3/...
	u4Byte			SupportICType;	
	// Cut Version TestChip/A-cut/B-cut... = 0/1/2/3/...
	u1Byte			CutVersion;
	// Fab Version TSMC/UMC = 0/1
	u1Byte			FabVersion;
	// RF Type 4T4R/3T3R/2T2R/1T2R/1T1R/...
	u1Byte			RFType;
	// Board Type Normal/HighPower/MiniCard/SLIM/Combo/... = 0/1/2/3/4/...
	u1Byte			BoardType;
	// with external LNA  NO/Yes = 0/1
	u1Byte			ExtLNA;
	// with external PA  NO/Yes = 0/1
	u1Byte			ExtPA;
	// with external TRSW  NO/Yes = 0/1
	u1Byte			ExtTRSW;
	u1Byte			PatchID; //Customer ID
	BOOLEAN			bInHctTest;
	BOOLEAN			bWIFITest;

	BOOLEAN			bDualMacSmartConcurrent;
	u4Byte			BK_SupportAbility;
	u1Byte			AntDivType;
//-----------HOOK BEFORE REG INIT-----------//	

	//
	// Dynamic Value
	//	
//--------- POINTER REFERENCE-----------//

	u1Byte			u1Byte_temp;
	BOOLEAN			BOOLEAN_temp;
	PADAPTER		PADAPTER_temp;
	
	// MAC PHY Mode SMSP/DMSP/DMDP = 0/1/2
	u1Byte			*pMacPhyMode;
	//TX Unicast byte count
	u8Byte			*pNumTxBytesUnicast;
	//RX Unicast byte count
	u8Byte			*pNumRxBytesUnicast;
	// Wireless mode B/G/A/N = BIT0/BIT1/BIT2/BIT3
	u1Byte			*pWirelessMode; //ODM_WIRELESS_MODE_E
	// Frequence band 2.4G/5G = 0/1
	u1Byte			*pBandType;
	// Secondary channel offset don't_care/below/above = 0/1/2
	u1Byte			*pSecChOffset;
	// Security mode Open/WEP/AES/TKIP = 0/1/2/3
	u1Byte			*pSecurity;
	// BW info 20M/40M/80M = 0/1/2
	u1Byte			*pBandWidth;
 	// Central channel location Ch1/Ch2/....
	u1Byte			*pChannel;	//central channel number
	// Common info for 92D DMSP
	
	BOOLEAN			*pbGetValueFromOtherMac;
	PADAPTER		*pBuddyAdapter;
	BOOLEAN			*pbMasterOfDMSP; //MAC0: master, MAC1: slave
	// Common info for Status
	BOOLEAN			*pbScanInProcess;
	BOOLEAN			*pbPowerSaving;
	// CCA Path 2-path/path-A/path-B = 0/1/2; using ODM_CCA_PATH_E.
	u1Byte			*pOnePathCCA;
	//pMgntInfo->AntennaTest
	u1Byte			*pAntennaTest;
	BOOLEAN			*pbNet_closed;
//--------- POINTER REFERENCE-----------//
	//
//------------CALL BY VALUE-------------//
	BOOLEAN			bWIFI_Direct;
	BOOLEAN			bWIFI_Display;
	BOOLEAN			bLinked;
	u1Byte			RSSI_Min;	
	u1Byte          	InterfaceIndex; // Add for 92D  dual MAC: 0--Mac0 1--Mac1
	BOOLEAN         	bIsMPChip;
	BOOLEAN			bOneEntryOnly;
	// Common info for BTDM
	BOOLEAN			bBtDisabled;			// BT is disabled
	BOOLEAN			bBtHsOperation;		// BT HS mode is under progress
	u1Byte			btHsDigVal;			// use BT rssi to decide the DIG value
	BOOLEAN			bBtDisableEdcaTurbo;	// Under some condition, don't enable the EDCA Turbo
	BOOLEAN			bBtBusy;   			// BT is busy.
//------------CALL BY VALUE-------------//
	
	//2 Define STA info.
	// _ODM_STA_INFO
	// 2012/01/12 MH For MP, we need to reduce one array pointer for default port.??
	PSTA_INFO_T		pODM_StaInfo[ODM_ASSOCIATE_ENTRY_NUM];

#if (RATE_ADAPTIVE_SUPPORT == 1)
	u2Byte 			CurrminRptTime;
	ODM_RA_INFO_T   RAInfo[ODM_ASSOCIATE_ENTRY_NUM]; //Use MacID as array index. STA MacID=0, VWiFi Client MacID={1, ODM_ASSOCIATE_ENTRY_NUM-1} //YJ,add,120119
#endif
	//
	// 2012/02/14 MH Add to share 88E ra with other SW team.
	// We need to colelct all support abilit to a proper area.
	//
	BOOLEAN				RaSupport88E;

	// Define ...........

	// Latest packet phy info (ODM write)
	ODM_PHY_DBG_INFO_T	 PhyDbgInfo;
	//PHY_INFO_88E		PhyInfo;

	// Latest packet phy info (ODM write)
	ODM_MAC_INFO		*pMacInfo;
	//MAC_INFO_88E		MacInfo;

	// Different Team independt structure??

	//
	//TX_RTP_CMN		TX_retrpo;
	//TX_RTP_88E		TX_retrpo;
	//TX_RTP_8195		TX_retrpo;

	//
	//ODM Structure
	//
	FAT_T		DM_FatTable;
	DIG_T		DM_DigTable;
	PS_T		DM_PSTable;
	Pri_CCA_T	DM_PriCCA;
	RXHP_T		DM_RXHP_Table;
	FALSE_ALARM_STATISTICS	FalseAlmCnt;
	FALSE_ALARM_STATISTICS	FlaseAlmCntBuddyAdapter;
	//#ifdef CONFIG_ANTENNA_DIVERSITY
	SWAT_T		DM_SWAT_Table;
	BOOLEAN		RSSI_test;
	//#endif 
	
#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
	//Path Div Struct
	PATHDIV_PARA	pathIQK;
#endif	

	EDCA_T		DM_EDCA_Table;
	u4Byte		WMMEDCA_BE;
	// Copy from SD4 structure
	//
	// ==================================================
	//

	//common
	//u1Byte		DM_Type;	
	//u1Byte    PSD_Report_RXHP[80];   // Add By Gary
	//u1Byte    PSD_func_flag;               // Add By Gary
	//for DIG
	//u1Byte		bDMInitialGainEnable;
	//u1Byte		binitialized; // for dm_initial_gain_Multi_STA use.
	//for Antenna diversity
	//u8	AntDivCfg;// 0:OFF , 1:ON, 2:by efuse
	//PSTA_INFO_T RSSI_target;

	BOOLEAN			*pbDriverStopped;
	BOOLEAN			*pbDriverIsGoingToPnpSetPowerSleep;
	BOOLEAN			*pinit_adpt_in_progress;

	//PSD
	BOOLEAN			bUserAssignLevel;
	RT_TIMER 		PSDTimer;
	u1Byte			RSSI_BT;			//come from BT
	BOOLEAN			bPSDinProcess;
	BOOLEAN			bDMInitialGainEnable;
	
	//for rate adaptive, in fact,  88c/92c fw will handle this
	u1Byte			bUseRAMask;

	ODM_RATE_ADAPTIVE	RateAdaptive;


	ODM_RF_CAL_T	RFCalibrateInfo;
	
	//
	// TX power tracking
	//
	u1Byte			BbSwingIdxOfdm;
	u1Byte			BbSwingIdxOfdmCurrent;
	u1Byte			BbSwingIdxOfdmBase;
	BOOLEAN			BbSwingFlagOfdm;
	u1Byte			BbSwingIdxCck;
	u1Byte			BbSwingIdxCckCurrent;
	u1Byte			BbSwingIdxCckBase;
	BOOLEAN			BbSwingFlagCck;
	u1Byte			*mp_mode; 
	//
	// ODM system resource.
	//

	// ODM relative time.
	RT_TIMER 				PathDivSwitchTimer;
	//2011.09.27 add for Path Diversity
	RT_TIMER				CCKPathDiversityTimer;
	RT_TIMER 	FastAntTrainingTimer;
	
	// ODM relative workitem.
#if (DM_ODM_SUPPORT_TYPE == ODM_MP)	
	#if USE_WORKITEM
	RT_WORK_ITEM			PathDivSwitchWorkitem;
	RT_WORK_ITEM			CCKPathDiversityWorkitem;
	RT_WORK_ITEM			FastAntTrainingWorkitem;
	#endif
#endif

#if (DM_ODM_SUPPORT_TYPE & ODM_MP)
	
#if (RT_PLATFORM != PLATFORM_LINUX)
} DM_ODM_T, *PDM_ODM_T;		// DM_Dynamic_Mechanism_Structure
#else
};
#endif	

#else// for AP,ADSL,CE Team
} DM_ODM_T, *PDM_ODM_T;		// DM_Dynamic_Mechanism_Structure
#endif



#if 1 //92c-series
#define ODM_RF_PATH_MAX 2
#else //jaguar - series
#define ODM_RF_PATH_MAX 4
#endif

typedef enum _ODM_RF_RADIO_PATH {
    ODM_RF_PATH_A = 0,   //Radio Path A
    ODM_RF_PATH_B = 1,   //Radio Path B
    ODM_RF_PATH_C = 2,   //Radio Path C
    ODM_RF_PATH_D = 3,   //Radio Path D
  //  ODM_RF_PATH_MAX,    //Max RF number 90 support
} ODM_RF_RADIO_PATH_E, *PODM_RF_RADIO_PATH_E;

 typedef enum _ODM_RF_CONTENT{
	odm_radioa_txt = 0x1000,
	odm_radiob_txt = 0x1001,
	odm_radioc_txt = 0x1002,
	odm_radiod_txt = 0x1003
} ODM_RF_CONTENT;

typedef enum _ODM_BB_Config_Type{
    CONFIG_BB_PHY_REG,   
    CONFIG_BB_AGC_TAB,   
    CONFIG_BB_AGC_TAB_2G,
    CONFIG_BB_AGC_TAB_5G, 
    CONFIG_BB_PHY_REG_PG,  
} ODM_BB_Config_Type, *PODM_BB_Config_Type;

// Status code
#if (DM_ODM_SUPPORT_TYPE != ODM_MP)
typedef enum _RT_STATUS{
	RT_STATUS_SUCCESS,
	RT_STATUS_FAILURE,
	RT_STATUS_PENDING,
	RT_STATUS_RESOURCE,
	RT_STATUS_INVALID_CONTEXT,
	RT_STATUS_INVALID_PARAMETER,
	RT_STATUS_NOT_SUPPORT,
	RT_STATUS_OS_API_FAILED,
}RT_STATUS,*PRT_STATUS;
#endif // end of RT_STATUS definition

#ifdef REMOVE_PACK
#pragma pack()
#endif

//#include "odm_function.h"

//3===========================================================
//3 DIG
//3===========================================================

typedef enum tag_Dynamic_Init_Gain_Operation_Type_Definition
{
	DIG_TYPE_THRESH_HIGH	= 0,
	DIG_TYPE_THRESH_LOW	= 1,
	DIG_TYPE_BACKOFF		= 2,
	DIG_TYPE_RX_GAIN_MIN	= 3,
	DIG_TYPE_RX_GAIN_MAX	= 4,
	DIG_TYPE_ENABLE 		= 5,
	DIG_TYPE_DISABLE 		= 6,	
	DIG_OP_TYPE_MAX
}DM_DIG_OP_E;
/*
typedef enum tag_CCK_Packet_Detection_Threshold_Type_Definition
{
	CCK_PD_STAGE_LowRssi = 0,
	CCK_PD_STAGE_HighRssi = 1,
	CCK_PD_STAGE_MAX = 3,
}DM_CCK_PDTH_E;

typedef enum tag_DIG_EXT_PORT_ALGO_Definition
{
	DIG_EXT_PORT_STAGE_0 = 0,
	DIG_EXT_PORT_STAGE_1 = 1,
	DIG_EXT_PORT_STAGE_2 = 2,
	DIG_EXT_PORT_STAGE_3 = 3,
	DIG_EXT_PORT_STAGE_MAX = 4,
}DM_DIG_EXT_PORT_ALG_E;

typedef enum tag_DIG_Connect_Definition
{
	DIG_STA_DISCONNECT = 0,	
	DIG_STA_CONNECT = 1,
	DIG_STA_BEFORE_CONNECT = 2,
	DIG_MultiSTA_DISCONNECT = 3,
	DIG_MultiSTA_CONNECT = 4,
	DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;


#define DM_MultiSTA_InitGainChangeNotify(Event) {DM_DigTable.CurMultiSTAConnectState = Event;}

#define DM_MultiSTA_InitGainChangeNotify_CONNECT(_ADAPTER)	\
	DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_CONNECT)

#define DM_MultiSTA_InitGainChangeNotify_DISCONNECT(_ADAPTER)	\
	DM_MultiSTA_InitGainChangeNotify(DIG_MultiSTA_DISCONNECT)
*/
#define		DM_DIG_THRESH_HIGH			40
#define		DM_DIG_THRESH_LOW			35

#define		DM_SCAN_RSSI_TH				0x14 //scan return issue for LC


#define		DM_FALSEALARM_THRESH_LOW	400
#define		DM_FALSEALARM_THRESH_HIGH	1000

#define		DM_DIG_MAX_NIC				0x3e
#define		DM_DIG_MIN_NIC				0x1e //0x22//0x1c

#define		DM_DIG_MAX_AP					0x32
#define		DM_DIG_MIN_AP					0x20

#define		DM_DIG_MAX_NIC_HP			0x46
#define		DM_DIG_MIN_NIC_HP			0x2e

#define		DM_DIG_MAX_AP_HP				0x42
#define		DM_DIG_MIN_AP_HP				0x30

//vivi 92c&92d has different definition, 20110504
//this is for 92c
#ifdef CONFIG_SPECIAL_SETTING_FOR_FUNAI_TV
#define		DM_DIG_FA_TH0				0x80//0x20
#else
#define		DM_DIG_FA_TH0				0x200//0x20
#endif
#define		DM_DIG_FA_TH1				0x300//0x100
#define		DM_DIG_FA_TH2				0x400//0x200
//this is for 92d
#define		DM_DIG_FA_TH0_92D			0x100
#define		DM_DIG_FA_TH1_92D			0x400
#define		DM_DIG_FA_TH2_92D			0x600

#define		DM_DIG_BACKOFF_MAX			12
#define		DM_DIG_BACKOFF_MIN			-4
#define		DM_DIG_BACKOFF_DEFAULT		10

//3===========================================================
//3 AGC RX High Power Mode
//3===========================================================
#define          LNA_Low_Gain_1                      0x64
#define          LNA_Low_Gain_2                      0x5A
#define          LNA_Low_Gain_3                      0x58

#define          FA_RXHP_TH1                           5000
#define          FA_RXHP_TH2                           1500
#define          FA_RXHP_TH3                             800
#define          FA_RXHP_TH4                             600
#define          FA_RXHP_TH5                             500

//3===========================================================
//3 EDCA
//3===========================================================

//3===========================================================
//3 Dynamic Tx Power
//3===========================================================
//Dynamic Tx Power Control Threshold
#define		TX_POWER_NEAR_FIELD_THRESH_LVL2	74
#define		TX_POWER_NEAR_FIELD_THRESH_LVL1	67
#define		TX_POWER_NEAR_FIELD_THRESH_AP		0x3F

#define		TxHighPwrLevel_Normal		0	
#define		TxHighPwrLevel_Level1		1
#define		TxHighPwrLevel_Level2		2
#define		TxHighPwrLevel_BT1			3
#define		TxHighPwrLevel_BT2			4
#define		TxHighPwrLevel_15			5
#define		TxHighPwrLevel_35			6
#define		TxHighPwrLevel_50			7
#define		TxHighPwrLevel_70			8
#define		TxHighPwrLevel_100			9

//3===========================================================
//3 Rate Adaptive
//3===========================================================
#define		DM_RATR_STA_INIT			0
#define		DM_RATR_STA_HIGH			1
#define 		DM_RATR_STA_MIDDLE		2
#define 		DM_RATR_STA_LOW			3

//3===========================================================
//3 BB Power Save
//3===========================================================


typedef enum tag_1R_CCA_Type_Definition
{
	CCA_1R =0,
	CCA_2R = 1,
	CCA_MAX = 2,
}DM_1R_CCA_E;

typedef enum tag_RF_Type_Definition
{
	RF_Save =0,
	RF_Normal = 1,
	RF_MAX = 2,
}DM_RF_E;

//3===========================================================
//3 Antenna Diversity
//3===========================================================
typedef enum tag_SW_Antenna_Switch_Definition
{
	Antenna_A = 1,
	Antenna_B = 2,
	Antenna_MAX = 3,
}DM_SWAS_E;


// Maximal number of antenna detection mechanism needs to perform, added by Roger, 2011.12.28.
#define	MAX_ANTENNA_DETECTION_CNT	10 

//
// Extern Global Variables.
//
#define	OFDM_TABLE_SIZE_92C 	37
#define	OFDM_TABLE_SIZE_92D 	43
#define	CCK_TABLE_SIZE		33

extern	u4Byte OFDMSwingTable[OFDM_TABLE_SIZE_92D];
extern	u1Byte CCKSwingTable_Ch1_Ch13[CCK_TABLE_SIZE][8];
extern	u1Byte CCKSwingTable_Ch14 [CCK_TABLE_SIZE][8];



//
// check Sta pointer valid or not
//
#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#define IS_STA_VALID(pSta)		(pSta && pSta->expire_to)
#elif (DM_ODM_SUPPORT_TYPE & ODM_MP)
#define IS_STA_VALID(pSta)		(pSta && pSta->bUsed)
#else
#define IS_STA_VALID(pSta)		(pSta)
#endif
// 20100514 Joseph: Add definition for antenna switching test after link.
// This indicates two different the steps. 
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK		0
#define SWAW_STEP_DETERMINE	1

VOID ODM_Write_DIG(IN	PDM_ODM_T	pDM_Odm, 	IN	u1Byte	CurrentIGI);
VOID ODM_Write_CCK_CCA_Thres(IN	PDM_ODM_T	pDM_Odm, IN	u1Byte	CurCCK_CCAThres);

VOID
ODM_SetAntenna(
	IN 	PDM_ODM_T	pDM_Odm,
	IN	u1Byte		Antenna);


#define dm_RF_Saving	ODM_RF_Saving
void ODM_RF_Saving(	IN	PDM_ODM_T	pDM_Odm,
							IN	u1Byte		bForceInNormal );

#define SwAntDivRestAfterLink	ODM_SwAntDivRestAfterLink
VOID ODM_SwAntDivRestAfterLink(	IN	PDM_ODM_T	pDM_Odm);

#define dm_CheckTXPowerTracking 	ODM_TXPowerTrackingCheck
VOID	
ODM_TXPowerTrackingCheck(
	IN		PDM_ODM_T		pDM_Odm
	);

BOOLEAN 
ODM_RAStateCheck(
	IN		PDM_ODM_T		pDM_Odm,
	IN		s4Byte			RSSI,
	IN		BOOLEAN			bForceUpdate,
	OUT		pu1Byte			pRATRState
	);

#if (DM_ODM_SUPPORT_TYPE & (ODM_MP|ODM_AP|ODM_ADSL))
//============================================================
// function prototype
//============================================================
//#define DM_ChangeDynamicInitGainThresh		ODM_ChangeDynamicInitGainThresh
//void	ODM_ChangeDynamicInitGainThresh(IN	PADAPTER	pAdapter,
//											IN	INT32		DM_Type,
//											IN	INT32		DM_Value);
VOID
ODM_ChangeDynamicInitGainThresh(
	IN	PDM_ODM_T	pDM_Odm,
	IN	u4Byte  DM_Type,
	IN	u4Byte DM_Value
	);

BOOLEAN
ODM_CheckPowerStatus(
	IN	PADAPTER		Adapter
	);


#if (DM_ODM_SUPPORT_TYPE != ODM_ADSL) 
VOID
ODM_RateAdaptiveStateApInit(
	IN	PADAPTER	Adapter	,
	IN	PRT_WLAN_STA  pEntry
	);
#endif
#define AP_InitRateAdaptiveState	ODM_RateAdaptiveStateApInit


#if (DM_ODM_SUPPORT_TYPE & (ODM_AP|ODM_ADSL))
#ifdef WIFI_WMM
VOID
ODM_IotEdcaSwitch(
	IN	PDM_ODM_T	pDM_Odm,
	IN	unsigned char		enable
	);
#endif

BOOLEAN
ODM_ChooseIotMainSTA(
	IN	PDM_ODM_T		pDM_Odm,
	IN	PSTA_INFO_T		pstat
	);
#endif

#if (DM_ODM_SUPPORT_TYPE==ODM_AP)
#ifdef HW_ANT_SWITCH
u1Byte
ODM_Diversity_AntennaSelect(
	IN	PDM_ODM_T	pDM_Odm,
	IN	u1Byte	*data
);
#endif
#endif

#define SwAntDivResetBeforeLink		ODM_SwAntDivResetBeforeLink
VOID ODM_SwAntDivResetBeforeLink(IN	PDM_ODM_T	pDM_Odm);

//#define SwAntDivCheckBeforeLink8192C	ODM_SwAntDivCheckBeforeLink8192C
#define SwAntDivCheckBeforeLink	ODM_SwAntDivCheckBeforeLink8192C
BOOLEAN 
ODM_SwAntDivCheckBeforeLink8192C(
	IN		PDM_ODM_T		pDM_Odm
	);


#endif

#define dm_SWAW_RSSI_Check	ODM_SwAntDivChkPerPktRssi
VOID ODM_SwAntDivChkPerPktRssi(	
	IN PDM_ODM_T		pDM_Odm,
	IN u1Byte			StationID,
	IN PODM_PHY_INFO_T pPhyInfo
	);

#if ((DM_ODM_SUPPORT_TYPE==ODM_MP)||(DM_ODM_SUPPORT_TYPE==ODM_CE))

u4Byte ConvertTo_dB(u4Byte Value);

u4Byte
GetPSDData(
	PDM_ODM_T	pDM_Odm,
	unsigned int 	point,
	u1Byte initial_gain_psd);

#endif

#if (DM_ODM_SUPPORT_TYPE == ODM_CE)

VOID
odm_DIGbyRSSI_LPS(
	IN		PDM_ODM_T		pDM_Odm
	);

u4Byte ODM_Get_Rate_Bitmap(
	IN	PDM_ODM_T	pDM_Odm,
	IN	u4Byte		macid,
	IN	u4Byte 		ra_mask,	
	IN	u1Byte 		rssi_level);
#endif
	

#if (DM_ODM_SUPPORT_TYPE & (ODM_MP))
#define	dm_PSDMonitorCallback	odm_PSDMonitorCallback
VOID	odm_PSDMonitorCallback(PRT_TIMER		pTimer);

VOID
odm_PSDMonitorWorkItemCallback(
    IN PVOID            pContext
    );


VOID
PatchDCTone(
	IN	PDM_ODM_T	pDM_Odm,
	pu4Byte		PSD_report,
	u1Byte 		initial_gain_psd
);
VOID
ODM_PSDMonitor(
	IN	PDM_ODM_T	pDM_Odm
	);
VOID	odm_PSD_Monitor(PDM_ODM_T	pDM_Odm);
VOID	odm_PSDMonitorInit(PDM_ODM_T 	pDM_Odm);

VOID
ODM_PSDDbgControl(
	IN	PADAPTER	Adapter,
	IN	u4Byte		mode,
	IN	u4Byte		btRssi
	);

#endif	// DM_ODM_SUPPORT_TYPE



VOID ODM_DMInit( IN	PDM_ODM_T	pDM_Odm);

VOID
ODM_DMWatchdog(
	IN		PDM_ODM_T			pDM_Odm			// For common use in the future
	);

VOID
ODM_CmnInfoInit(
	IN		PDM_ODM_T		pDM_Odm,
	IN		ODM_CMNINFO_E	CmnInfo,
	IN		u4Byte			Value	
	);

VOID
ODM_CmnInfoHook(
	IN		PDM_ODM_T		pDM_Odm,
	IN		ODM_CMNINFO_E	CmnInfo,
	IN		PVOID			pValue	
	);

VOID
ODM_CmnInfoPtrArrayHook(
	IN		PDM_ODM_T		pDM_Odm,
	IN		ODM_CMNINFO_E	CmnInfo,
	IN		u2Byte			Index,
	IN		PVOID			pValue	
	);

VOID
ODM_CmnInfoUpdate(
	IN		PDM_ODM_T		pDM_Odm,
	IN		u4Byte			CmnInfo,
	IN		u8Byte			Value	
	);

VOID 
ODM_InitAllTimers(
    IN PDM_ODM_T	pDM_Odm 
    );

VOID 
ODM_CancelAllTimers(
    IN PDM_ODM_T    pDM_Odm 
    );

VOID
ODM_ReleaseAllTimers(
    IN PDM_ODM_T	pDM_Odm 
    );

VOID
ODM_ResetIQKResult(
    IN PDM_ODM_T pDM_Odm 
    );


#if (DM_ODM_SUPPORT_TYPE == ODM_MP)
VOID ODM_InitAllWorkItems(IN PDM_ODM_T	pDM_Odm );
VOID ODM_FreeAllWorkItems(IN PDM_ODM_T	pDM_Odm );

VOID odm_PathDivChkAntSwitch(PDM_ODM_T pDM_Odm);
VOID ODM_PathDivRestAfterLink(
	IN	PDM_ODM_T		pDM_Odm
	);


//===========================================//
// Neil Chen----2011--06--15--

//3 Path Diversity
//===========================================================

#define	TP_MODE		       0
#define	RSSI_MODE		       1
#define	TRAFFIC_LOW	       0
#define	TRAFFIC_HIGH	       1

//#define   PATHDIV_ENABLE 	 1

//VOID odm_PathDivChkAntSwitch(PADAPTER	Adapter,u1Byte	Step);
VOID ODM_PathDivRestAfterLink(
	IN	PDM_ODM_T	pDM_Odm
	);

#define dm_PathDiv_RSSI_Check	ODM_PathDivChkPerPktRssi
VOID ODM_PathDivChkPerPktRssi(PADAPTER		Adapter,
										BOOLEAN			bIsDefPort,
										BOOLEAN			bMatchBSSID,
										PRT_WLAN_STA	pEntry,
										PRT_RFD			pRfd	);

u8Byte
PlatformDivision64(
	IN u8Byte	x,
	IN u8Byte	y
);


// 20100514 Joseph: Add definition for antenna switching test after link.
// This indicates two different the steps. 
// In SWAW_STEP_PEAK, driver needs to switch antenna and listen to the signal on the air.
// In SWAW_STEP_DETERMINE, driver just compares the signal captured in SWAW_STEP_PEAK
// with original RSSI to determine if it is necessary to switch antenna.
#define SWAW_STEP_PEAK		0
#define SWAW_STEP_DETERMINE	1

//====================================================
//3 PathDiV End
//====================================================

#define PathDivCheckBeforeLink8192C	ODM_PathDiversityBeforeLink92C
BOOLEAN 
ODM_PathDiversityBeforeLink92C(
	//IN	PADAPTER	Adapter
	IN		PDM_ODM_T		pDM_Odm
	);

#define DM_ChangeDynamicInitGainThresh		ODM_ChangeDynamicInitGainThresh
//void	ODM_ChangeDynamicInitGainThresh(IN	PADAPTER	pAdapter,
//											IN	INT32		DM_Type,
//											IN	INT32		DM_Value);
//


VOID
ODM_CCKPathDiversityChkPerPktRssi(
	PADAPTER		Adapter,
	BOOLEAN			bIsDefPort,
	BOOLEAN			bMatchBSSID,
	PRT_WLAN_STA	pEntry,
	PRT_RFD			pRfd,
	pu1Byte			pDesc
	);


typedef enum tag_DIG_Connect_Definition
{
	DIG_STA_DISCONNECT = 0,	
	DIG_STA_CONNECT = 1,
	DIG_STA_BEFORE_CONNECT = 2,
	DIG_MultiSTA_DISCONNECT = 3,
	DIG_MultiSTA_CONNECT = 4,
	DIG_CONNECT_MAX
}DM_DIG_CONNECT_E;


VOID
ODM_FillTXPathInTXDESC(
		IN	PADAPTER	Adapter,
		IN	PRT_TCB		pTcb,
		IN	pu1Byte		pDesc
);


#define dm_SWAW_RSSI_Check	ODM_SwAntDivChkPerPktRssi

//
// 2012/01/12 MH Check afapter status. Temp fix BSOD.
//
#define	HAL_ADAPTER_STS_CHK(pDM_Odm)\
	if (pDM_Odm->Adapter == NULL)\
	{\
		return;\
	}\


//
// For new definition in MP temporarily fro power tracking,
//
#define odm_TXPowerTrackingDirectCall(_Adapter)	\
	IS_HARDWARE_TYPE_8192D(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92D(_Adapter) : \
	IS_HARDWARE_TYPE_8192C(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_92C(_Adapter) : \
	IS_HARDWARE_TYPE_8723A(_Adapter) ? odm_TXPowerTrackingCallback_ThermalMeter_8723A(_Adapter) :\
	odm_TXPowerTrackingCallback_ThermalMeter_8188E(_Adapter)

VOID
ODM_SetTxAntByTxInfo_88C_92D(
	IN		PDM_ODM_T		pDM_Odm,
	IN		pu1Byte			pDesc,
	IN		u1Byte			macId	
	);
#endif	// #if (DM_ODM_SUPPORT_TYPE == ODM_MP)
VOID
ODM_AntselStatistics_88C(
	IN		PDM_ODM_T		pDM_Odm,
	IN		u1Byte			MacId,
	IN		u4Byte			PWDBAll,
	IN		BOOLEAN			isCCKrate
);

#if ( DM_ODM_SUPPORT_TYPE & (ODM_MP |ODM_CE))

VOID
ODM_SingleDualAntennaDefaultSetting(
	IN		PDM_ODM_T		pDM_Odm
	);

BOOLEAN
ODM_SingleDualAntennaDetection(
	IN		PDM_ODM_T		pDM_Odm,
	IN		u1Byte			mode
	);

#endif	// #if ((DM_ODM_SUPPORT_TYPE==ODM_MP)||(DM_ODM_SUPPORT_TYPE==ODM_CE))

#if (DM_ODM_SUPPORT_TYPE == ODM_CE)
void odm_dtc(PDM_ODM_T pDM_Odm);
#endif /* #if (DM_ODM_SUPPORT_TYPE == ODM_CE) */

#endif