rtl8188eu: Remove trailing white space from all source files

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
This commit is contained in:
Larry Finger 2013-05-18 23:28:07 -05:00
parent 77e736c66a
commit f5f3863bc5
205 changed files with 55371 additions and 55581 deletions

View file

@ -1,7 +1,7 @@
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
@ -75,7 +75,7 @@ struct stainfo_stats {
u64 last_rx_probersp_uo_pkts;
u64 last_rx_ctrl_pkts;
u64 last_rx_data_pkts;
u64 rx_bytes;
u64 rx_drops;
@ -100,24 +100,24 @@ struct sta_info {
//_list asoc_list; //20061114
//_list sleep_list;//sleep_q
//_list wakeup_list;//wakeup_q
struct sta_xmit_priv sta_xmitpriv;
struct sta_recv_priv sta_recvpriv;
_queue sleep_q;
unsigned int sleepq_len;
uint state;
uint aid;
uint mac_id;
uint qos_option;
u8 hwaddr[ETH_ALEN];
uint ieee8021x_blocked; //0: allowed, 1:blocked
uint ieee8021x_blocked; //0: allowed, 1:blocked
uint dot118021XPrivacy; //aes, tkip...
union Keytype dot11tkiptxmickey;
union Keytype dot11tkiprxmickey;
union Keytype dot118021x_UncstKey;
union Keytype dot118021x_UncstKey;
union pn48 dot11txpn; // PN48 used for Unicast xmit.
union pn48 dot11rxpn; // PN48 used for Unicast recv.
@ -126,12 +126,12 @@ struct sta_info {
u32 bssratelen;
s32 rssi;
s32 signal_quality;
u8 cts2self;
u8 rtsen;
u8 raid;
u8 init_rate;
u8 init_rate;
u32 ra_mask;
u8 wireless_mode; // NETWORK_TYPE
struct stainfo_stats sta_stats;
@ -162,49 +162,49 @@ struct sta_info {
u8 alive_count;
#endif //CONFIG_TDLS
//for A-MPDU TX, ADDBA timeout check
//for A-MPDU TX, ADDBA timeout check
_timer addba_retry_timer;
//for A-MPDU Rx reordering buffer control
//for A-MPDU Rx reordering buffer control
struct recv_reorder_ctrl recvreorder_ctrl[16];
//for A-MPDU Tx
//unsigned char ampdu_txen_bitmap;
u16 BA_starting_seqctrl[16];
#ifdef CONFIG_80211N_HT
struct ht_priv htpriv;
struct ht_priv htpriv;
#endif
//Notes:
//Notes:
//STA_Mode:
//curr_network(mlme_priv/security_priv/qos/ht) + sta_info: (STA & AP) CAP/INFO
//curr_network(mlme_priv/security_priv/qos/ht) + sta_info: (STA & AP) CAP/INFO
//scan_q: AP CAP/INFO
//AP_Mode:
//curr_network(mlme_priv/security_priv/qos/ht) : AP CAP/INFO
//sta_info: (AP & STA) CAP/INFO
#ifdef CONFIG_AP_MODE
_list asoc_list;
_list auth_list;
unsigned int expire_to;
unsigned int auth_seq;
unsigned int authalg;
unsigned char chg_txt[128];
u16 capability;
int flags;
u16 capability;
int flags;
int dot8021xalg;//0:disable, 1:psk, 2:802.1x
int wpa_psk;//0:disable, bit(0): WPA, bit(1):WPA2
int wpa_group_cipher;
int wpa2_group_cipher;
int wpa_pairwise_cipher;
int wpa2_pairwise_cipher;
int wpa2_pairwise_cipher;
u8 bpairwise_key_installed;
@ -226,7 +226,7 @@ struct sta_info {
u8 uapsd_bk;//BIT(0): Delivery enabled, BIT(1): Trigger enabled
u8 uapsd_be;
u8 uapsd_vi;
u8 uapsd_vo;
u8 uapsd_vo;
u8 has_legacy_ac;
unsigned int sleepq_ac_len;
@ -245,16 +245,16 @@ struct sta_info {
u8 num_of_secdev_type;
u8 secdev_types_list[32];// 32/8 == 4;
u16 dev_name_len;
u8 dev_name[32];
u8 dev_name[32];
#endif //CONFIG_P2P
#ifdef CONFIG_TX_MCAST2UNI
u8 under_exist_checking;
#endif // CONFIG_TX_MCAST2UNI
u8 keep_alive_trycnt;
#endif // CONFIG_AP_MODE
#endif // CONFIG_AP_MODE
#ifdef CONFIG_IOCTL_CFG80211
u8 *passoc_req;
@ -263,22 +263,22 @@ struct sta_info {
//for DM
RSSI_STA rssi_stat;
//
// ================ODM Relative Info=======================
// Please be care, dont declare too much structure here. It will cost memory * STA support num.
//
//
// 2011/10/20 MH Add for ODM STA info.
// 2011/10/20 MH Add for ODM STA info.
//
// Driver Write
u8 bValid; // record the sta status link or not?
//u8 WirelessMode; //
//u8 WirelessMode; //
u8 IOTPeer; // Enum value. HT_IOT_PEER_E
u8 rssi_level; //for Refresh RA mask
// ODM Write
//1 PHY_STATUS_INFO
u8 RSSI_Path[4]; //
u8 RSSI_Path[4]; //
u8 RSSI_Ave;
u8 RXEVM[4];
u8 RXSNR[4];
@ -374,21 +374,21 @@ struct sta_info {
, sta->sta_stats.rx_data_pkts -sta->sta_stats.last_rx_data_pkts
#define STA_PKTS_FMT "(m:%llu, c:%llu, d:%llu)"
struct sta_priv {
u8 *pallocated_stainfo_buf;
u8 *pstainfo_buf;
_queue free_sta_queue;
_lock sta_hash_lock;
_list sta_hash[NUM_STA];
int asoc_sta_count;
_queue sleep_q;
_queue wakeup_q;
_adapter *padapter;
#ifdef CONFIG_AP_MODE
_list asoc_list;
@ -401,7 +401,7 @@ struct sta_priv {
unsigned int auth_to; //sec, time to expire in authenticating.
unsigned int assoc_to; //sec, time to expire before associating.
unsigned int expire_to; //sec , time to expire after associated.
/* pointers to STA info; based on allocated AID or NULL if AID free
* AID is in the range 1-2007, so sta_aid[0] corresponders to AID 1
* and so on
@ -409,13 +409,13 @@ struct sta_priv {
struct sta_info *sta_aid[NUM_STA];
u16 sta_dz_bitmap;//only support 15 stations, staion aid bitmap for sleeping sta.
u16 tim_bitmap;//only support 15 stations, aid=0~15 mapping bit0~bit15
u16 tim_bitmap;//only support 15 stations, aid=0~15 mapping bit0~bit15
u16 max_num_sta;
struct wlan_acl_pool acl_list;
#endif
#endif
};
@ -432,7 +432,7 @@ __inline static u32 wifi_mac_hash(u8 *mac)
x ^= x >> 8;
x = x & (NUM_STA - 1);
return x;
}
@ -453,4 +453,3 @@ extern struct sta_info* rtw_get_bcmc_stainfo(_adapter* padapter);
extern u8 rtw_access_ctrl(_adapter *padapter, u8 *mac_addr);
#endif //_STA_INFO_H_