skyfall/rtl8188eu
1
0
Fork 0
mirror of https://github.com/lwfinger/rtl8188eu.git synced 2024-11-25 22:13:41 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
rtl8188eu/include/rtw_mp.h
Larry Finger 0e4009c999 rtl8188eu: Remove dead code for other than USB 
The vendor code has pieces of code for PCI, SDIO, and GSPI. Remove it
and CONFIG_USB_HCI.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
2013-07-11 13:35:36 -05:00

573 lines
16 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
*
******************************************************************************/
#ifndef _RTW_MP_H_
#define _RTW_MP_H_
// 00 - Success
// 11 - Error
#define STATUS_SUCCESS (0x00000000L)
#define STATUS_PENDING (0x00000103L)
#define STATUS_UNSUCCESSFUL (0xC0000001L)
#define STATUS_INSUFFICIENT_RESOURCES (0xC000009AL)
#define STATUS_NOT_SUPPORTED (0xC00000BBL)
#define NDIS_STATUS_SUCCESS ((NDIS_STATUS)STATUS_SUCCESS)
#define NDIS_STATUS_PENDING ((NDIS_STATUS)STATUS_PENDING)
#define NDIS_STATUS_NOT_RECOGNIZED ((NDIS_STATUS)0x00010001L)
#define NDIS_STATUS_NOT_COPIED ((NDIS_STATUS)0x00010002L)
#define NDIS_STATUS_NOT_ACCEPTED ((NDIS_STATUS)0x00010003L)
#define NDIS_STATUS_CALL_ACTIVE ((NDIS_STATUS)0x00010007L)
#define NDIS_STATUS_FAILURE ((NDIS_STATUS)STATUS_UNSUCCESSFUL)
#define NDIS_STATUS_RESOURCES ((NDIS_STATUS)STATUS_INSUFFICIENT_RESOURCES)
#define NDIS_STATUS_CLOSING ((NDIS_STATUS)0xC0010002L)
#define NDIS_STATUS_BAD_VERSION ((NDIS_STATUS)0xC0010004L)
#define NDIS_STATUS_BAD_CHARACTERISTICS ((NDIS_STATUS)0xC0010005L)
#define NDIS_STATUS_ADAPTER_NOT_FOUND ((NDIS_STATUS)0xC0010006L)
#define NDIS_STATUS_OPEN_FAILED ((NDIS_STATUS)0xC0010007L)
#define NDIS_STATUS_DEVICE_FAILED ((NDIS_STATUS)0xC0010008L)
#define NDIS_STATUS_MULTICAST_FULL ((NDIS_STATUS)0xC0010009L)
#define NDIS_STATUS_MULTICAST_EXISTS ((NDIS_STATUS)0xC001000AL)
#define NDIS_STATUS_MULTICAST_NOT_FOUND ((NDIS_STATUS)0xC001000BL)
#define NDIS_STATUS_REQUEST_ABORTED ((NDIS_STATUS)0xC001000CL)
#define NDIS_STATUS_RESET_IN_PROGRESS ((NDIS_STATUS)0xC001000DL)
#define NDIS_STATUS_CLOSING_INDICATING ((NDIS_STATUS)0xC001000EL)
#define NDIS_STATUS_NOT_SUPPORTED ((NDIS_STATUS)STATUS_NOT_SUPPORTED)
#define NDIS_STATUS_INVALID_PACKET ((NDIS_STATUS)0xC001000FL)
#define NDIS_STATUS_OPEN_LIST_FULL ((NDIS_STATUS)0xC0010010L)
#define NDIS_STATUS_ADAPTER_NOT_READY ((NDIS_STATUS)0xC0010011L)
#define NDIS_STATUS_ADAPTER_NOT_OPEN ((NDIS_STATUS)0xC0010012L)
#define NDIS_STATUS_NOT_INDICATING ((NDIS_STATUS)0xC0010013L)
#define NDIS_STATUS_INVALID_LENGTH ((NDIS_STATUS)0xC0010014L)
#define NDIS_STATUS_INVALID_DATA ((NDIS_STATUS)0xC0010015L)
#define NDIS_STATUS_BUFFER_TOO_SHORT ((NDIS_STATUS)0xC0010016L)
#define NDIS_STATUS_INVALID_OID ((NDIS_STATUS)0xC0010017L)
#define NDIS_STATUS_ADAPTER_REMOVED ((NDIS_STATUS)0xC0010018L)
#define NDIS_STATUS_UNSUPPORTED_MEDIA ((NDIS_STATUS)0xC0010019L)
#define NDIS_STATUS_GROUP_ADDRESS_IN_USE ((NDIS_STATUS)0xC001001AL)
#define NDIS_STATUS_FILE_NOT_FOUND ((NDIS_STATUS)0xC001001BL)
#define NDIS_STATUS_ERROR_READING_FILE ((NDIS_STATUS)0xC001001CL)
#define NDIS_STATUS_ALREADY_MAPPED ((NDIS_STATUS)0xC001001DL)
#define NDIS_STATUS_RESOURCE_CONFLICT ((NDIS_STATUS)0xC001001EL)
#define NDIS_STATUS_NO_CABLE ((NDIS_STATUS)0xC001001FL)
#define NDIS_STATUS_INVALID_SAP ((NDIS_STATUS)0xC0010020L)
#define NDIS_STATUS_SAP_IN_USE ((NDIS_STATUS)0xC0010021L)
#define NDIS_STATUS_INVALID_ADDRESS ((NDIS_STATUS)0xC0010022L)
#define NDIS_STATUS_VC_NOT_ACTIVATED ((NDIS_STATUS)0xC0010023L)
#define NDIS_STATUS_DEST_OUT_OF_ORDER ((NDIS_STATUS)0xC0010024L) // cause 27
#define NDIS_STATUS_VC_NOT_AVAILABLE ((NDIS_STATUS)0xC0010025L) // cause 35,45
#define NDIS_STATUS_CELLRATE_NOT_AVAILABLE ((NDIS_STATUS)0xC0010026L) // cause 37
#define NDIS_STATUS_INCOMPATABLE_QOS ((NDIS_STATUS)0xC0010027L) // cause 49
#define NDIS_STATUS_AAL_PARAMS_UNSUPPORTED ((NDIS_STATUS)0xC0010028L) // cause 93
#define NDIS_STATUS_NO_ROUTE_TO_DESTINATION ((NDIS_STATUS)0xC0010029L) // cause 3
typedef enum _ANTENNA_PATH{
ANTENNA_NONE = 0x00,
ANTENNA_D ,
ANTENNA_C ,
ANTENNA_CD ,
ANTENNA_B ,
ANTENNA_BD ,
ANTENNA_BC ,
ANTENNA_BCD ,
ANTENNA_A ,
ANTENNA_AD ,
ANTENNA_AC ,
ANTENNA_ACD ,
ANTENNA_AB ,
ANTENNA_ABD ,
ANTENNA_ABC ,
ANTENNA_ABCD
} ANTENNA_PATH;
#define MAX_MP_XMITBUF_SZ 2048
#define NR_MP_XMITFRAME 8
struct mp_xmit_frame
{
_list list;
struct pkt_attrib attrib;
_pkt *pkt;
int frame_tag;
_adapter *padapter;
//insert urb, irp, and irpcnt info below...
u8 *mem_addr;
u32 sz[8];
PURB pxmit_urb[8];
u8 bpending[8];
sint ac_tag[8];
sint last[8];
uint irpcnt;
uint fragcnt;
uint mem[(MAX_MP_XMITBUF_SZ >> 2)];
};
struct mp_wiparam
{
u32 bcompleted;
u32 act_type;
u32 io_offset;
u32 io_value;
};
typedef void(*wi_act_func)(void* padapter);
struct mp_tx
{
u8 stop;
u32 count, sended;
u8 payload;
struct pkt_attrib attrib;
struct tx_desc desc;
u8 *pallocated_buf;
u8 *buf;
u32 buf_size, write_size;
_thread_hdl_ PktTxThread;
};
#include <Hal8188EPhyCfg.h>
#define MP_MAX_LINES 1000
#define MP_MAX_LINES_BYTES 256
#define u1Byte u8
#define s1Byte s8
#define u4Byte u32
#define s4Byte s32
#define u1Byte u8
#define pu1Byte u8*
#define u2Byte u16
#define pu2Byte u16*
#define u4Byte u32
#define pu4Byte u32*
#define u8Byte u64
#define pu8Byte u64*
#define s1Byte s8
#define ps1Byte s8*
#define s2Byte s16
#define ps2Byte s16*
#define s4Byte s32
#define ps4Byte s32*
#define s8Byte s64
#define ps8Byte s64*
#define UCHAR u8
#define USHORT u16
#define UINT u32
#define ULONG u32
#define PULONG u32*
typedef void (*MPT_WORK_ITEM_HANDLER)(void *Adapter);
typedef struct _MPT_CONTEXT
{
// Indicate if we have started Mass Production Test.
bool bMassProdTest;
// Indicate if the driver is unloading or unloaded.
bool bMptDrvUnload;
_sema MPh2c_Sema;
_timer MPh2c_timeout_timer;
// Event used to sync H2c for BT control
bool MptH2cRspEvent;
bool MptBtC2hEvent;
bool bMPh2c_timeout;
/* 8190 PCI does not support NDIS_WORK_ITEM. */
// Work Item for Mass Production Test.
//NDIS_WORK_ITEM MptWorkItem;
// RT_WORK_ITEM MptWorkItem;
// Event used to sync the case unloading driver and MptWorkItem is still in progress.
// NDIS_EVENT MptWorkItemEvent;
// To protect the following variables.
// NDIS_SPIN_LOCK MptWorkItemSpinLock;
// Indicate a MptWorkItem is scheduled and not yet finished.
bool bMptWorkItemInProgress;
// An instance which implements function and context of MptWorkItem.
MPT_WORK_ITEM_HANDLER CurrMptAct;
// 1=Start, 0=Stop from UI.
ULONG MptTestStart;
// _TEST_MODE, defined in MPT_Req2.h
ULONG MptTestItem;
// Variable needed in each implementation of CurrMptAct.
ULONG MptActType; // Type of action performed in CurrMptAct.
// The Offset of IO operation is depend of MptActType.
ULONG MptIoOffset;
// The Value of IO operation is depend of MptActType.
ULONG MptIoValue;
// The RfPath of IO operation is depend of MptActType.
ULONG MptRfPath;
WIRELESS_MODE MptWirelessModeToSw; // Wireless mode to switch.
u8 MptChannelToSw; // Channel to switch.
u8 MptInitGainToSet; // Initial gain to set.
//ULONG bMptAntennaA; // true if we want to use antenna A.
ULONG MptBandWidth; // bandwidth to switch.
ULONG MptRateIndex; // rate index.
// Register value kept for Single Carrier Tx test.
u8 btMpCckTxPower;
// Register value kept for Single Carrier Tx test.
u8 btMpOfdmTxPower;
// For MP Tx Power index
u8 TxPwrLevel[2]; // rf-A, rf-B
// Content of RCR Regsiter for Mass Production Test.
ULONG MptRCR;
// true if we only receive packets with specific pattern.
bool bMptFilterPattern;
// Rx OK count, statistics used in Mass Production Test.
ULONG MptRxOkCnt;
// Rx CRC32 error count, statistics used in Mass Production Test.
ULONG MptRxCrcErrCnt;
bool bCckContTx; // true if we are in CCK Continuous Tx test.
bool bOfdmContTx; // true if we are in OFDM Continuous Tx test.
bool bStartContTx; // true if we have start Continuous Tx test.
// true if we are in Single Carrier Tx test.
bool bSingleCarrier;
// true if we are in Carrier Suppression Tx Test.
bool bCarrierSuppression;
//true if we are in Single Tone Tx test.
bool bSingleTone;
// ACK counter asked by K.Y..
bool bMptEnableAckCounter;
ULONG MptAckCounter;
// SD3 Willis For 8192S to save 1T/2T RF table for ACUT Only fro ACUT delete later ~~~!
//s1Byte BufOfLines[2][MAX_LINES_HWCONFIG_TXT][MAX_BYTES_LINE_HWCONFIG_TXT];
//s1Byte BufOfLines[2][MP_MAX_LINES][MP_MAX_LINES_BYTES];
//s4Byte RfReadLine[2];
u8 APK_bound[2]; //for APK path A/path B
bool bMptIndexEven;
u8 backup0xc50;
u8 backup0xc58;
u8 backup0xc30;
u8 backup0x52_RF_A;
u8 backup0x52_RF_B;
u1Byte h2cReqNum;
u1Byte c2hBuf[20];
u1Byte btInBuf[100];
ULONG mptOutLen;
u1Byte mptOutBuf[100];
}MPT_CONTEXT, *PMPT_CONTEXT;
enum {
WRITE_REG = 1,
READ_REG,
WRITE_RF,
READ_RF,
MP_START,
MP_STOP,
MP_RATE,
MP_CHANNEL,
MP_BANDWIDTH,
MP_TXPOWER,
MP_ANT_TX,
MP_ANT_RX,
MP_CTX,
MP_QUERY,
MP_ARX,
MP_PSD,
MP_PWRTRK,
MP_THER,
MP_IOCTL,
EFUSE_GET,
EFUSE_SET,
MP_RESET_STATS,
MP_DUMP,
MP_PHYPARA,
MP_SetRFPathSwh,
MP_QueryDrvStats,
MP_SetBT,
CTA_TEST,
MP_NULL,
};
struct mp_priv
{
_adapter *papdater;
//Testing Flag
u32 mode;//0 for normal type packet, 1 for loopback packet (16bytes TXCMD)
u32 prev_fw_state;
//OID cmd handler
struct mp_wiparam workparam;
// u8 act_in_progress;
//Tx Section
u8 TID;
u32 tx_pktcount;
struct mp_tx tx;
//Rx Section
u32 rx_pktcount;
u32 rx_crcerrpktcount;
u32 rx_pktloss;
struct recv_stat rxstat;
//RF/BB relative
u8 channel;
u8 bandwidth;
u8 prime_channel_offset;
u8 txpoweridx;
u8 txpoweridx_b;
u8 rateidx;
u32 preamble;
// u8 modem;
u32 CrystalCap;
// u32 curr_crystalcap;
u16 antenna_tx;
u16 antenna_rx;
// u8 curr_rfpath;
u8 check_mp_pkt;
u8 bSetTxPower;
// uint ForcedDataRate;
struct wlan_network mp_network;
NDIS_802_11_MAC_ADDRESS network_macaddr;
u8 *pallocated_mp_xmitframe_buf;
u8 *pmp_xmtframe_buf;
_queue free_mp_xmitqueue;
u32 free_mp_xmitframe_cnt;
MPT_CONTEXT MptCtx;
};
typedef struct _IOCMD_STRUCT_ {
u8 cmdclass;
u16 value;
u8 index;
}IOCMD_STRUCT;
struct rf_reg_param {
u32 path;
u32 offset;
u32 value;
};
struct bb_reg_param {
u32 offset;
u32 value;
};
//=======================================================================
#define LOWER true
#define RAISE false
/* Hardware Registers */
#define BB_REG_BASE_ADDR 0x800
/* MP variables */
typedef enum _MP_MODE_ {
MP_OFF,
MP_ON,
MP_ERR,
MP_CONTINUOUS_TX,
MP_SINGLE_CARRIER_TX,
MP_CARRIER_SUPPRISSION_TX,
MP_SINGLE_TONE_TX,
MP_PACKET_TX,
MP_PACKET_RX
} MP_MODE;
#define MAX_RF_PATH_NUMS RF_PATH_MAX
extern u8 mpdatarate[NumRates];
/* MP set force data rate base on the definition. */
typedef enum _MPT_RATE_INDEX
{
/* CCK rate. */
MPT_RATE_1M, /* 0 */
MPT_RATE_2M,
MPT_RATE_55M,
MPT_RATE_11M, /* 3 */
/* OFDM rate. */
MPT_RATE_6M, /* 4 */
MPT_RATE_9M,
MPT_RATE_12M,
MPT_RATE_18M,
MPT_RATE_24M,
MPT_RATE_36M,
MPT_RATE_48M,
MPT_RATE_54M, /* 11 */
/* HT rate. */
MPT_RATE_MCS0, /* 12 */
MPT_RATE_MCS1,
MPT_RATE_MCS2,
MPT_RATE_MCS3,
MPT_RATE_MCS4,
MPT_RATE_MCS5,
MPT_RATE_MCS6,
MPT_RATE_MCS7, /* 19 */
MPT_RATE_MCS8,
MPT_RATE_MCS9,
MPT_RATE_MCS10,
MPT_RATE_MCS11,
MPT_RATE_MCS12,
MPT_RATE_MCS13,
MPT_RATE_MCS14,
MPT_RATE_MCS15, /* 27 */
MPT_RATE_LAST
}MPT_RATE_E, *PMPT_RATE_E;
#define MAX_TX_PWR_INDEX_N_MODE 64 // 0x3F
typedef enum _POWER_MODE_ {
POWER_LOW = 0,
POWER_NORMAL
}POWER_MODE;
#define RX_PKT_BROADCAST 1
#define RX_PKT_DEST_ADDR 2
#define RX_PKT_PHY_MATCH 3
typedef enum _ENCRY_CTRL_STATE_ {
HW_CONTROL, //hw encryption& decryption
SW_CONTROL, //sw encryption& decryption
HW_ENCRY_SW_DECRY, //hw encryption & sw decryption
SW_ENCRY_HW_DECRY //sw encryption & hw decryption
}ENCRY_CTRL_STATE;
//=======================================================================
//extern struct mp_xmit_frame *alloc_mp_xmitframe(struct mp_priv *pmp_priv);
//extern int free_mp_xmitframe(struct xmit_priv *pxmitpriv, struct mp_xmit_frame *pmp_xmitframe);
extern s32 init_mp_priv(PADAPTER padapter);
extern void free_mp_priv(struct mp_priv *pmp_priv);
extern s32 MPT_InitializeAdapter(PADAPTER padapter, u8 Channel);
extern void MPT_DeInitAdapter(PADAPTER padapter);
extern s32 mp_start_test(PADAPTER padapter);
extern void mp_stop_test(PADAPTER padapter);
//=======================================================================
extern u32 _read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask);
extern void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val);
extern u32 read_macreg(_adapter *padapter, u32 addr, u32 sz);
extern void write_macreg(_adapter *padapter, u32 addr, u32 val, u32 sz);
extern u32 read_bbreg(_adapter *padapter, u32 addr, u32 bitmask);
extern void write_bbreg(_adapter *padapter, u32 addr, u32 bitmask, u32 val);
extern u32 read_rfreg(PADAPTER padapter, u8 rfpath, u32 addr);
extern void write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 val);
extern void SetChannel(PADAPTER pAdapter);
extern void SetBandwidth(PADAPTER pAdapter);
extern void SetTxPower(PADAPTER pAdapter);
extern void SetAntennaPathPower(PADAPTER pAdapter);
//extern void SetTxAGCOffset(PADAPTER pAdapter, u32 ulTxAGCOffset);
extern void SetDataRate(PADAPTER pAdapter);
extern void SetAntenna(PADAPTER pAdapter);
//extern void SetCrystalCap(PADAPTER pAdapter);
extern s32 SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
extern void GetThermalMeter(PADAPTER pAdapter, u8 *value);
extern void SetContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void SetSingleCarrierTx(PADAPTER pAdapter, u8 bStart);
extern void SetSingleToneTx(PADAPTER pAdapter, u8 bStart);
extern void SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
extern void PhySetTxPowerLevel(PADAPTER pAdapter);
extern void fill_txdesc_for_mp(PADAPTER padapter, struct tx_desc *ptxdesc);
extern void SetPacketTx(PADAPTER padapter);
extern void SetPacketRx(PADAPTER pAdapter, u8 bStartRx);
extern void ResetPhyRxPktCount(PADAPTER pAdapter);
extern u32 GetPhyRxPktReceived(PADAPTER pAdapter);
extern u32 GetPhyRxPktCRC32Error(PADAPTER pAdapter);
extern s32 SetPowerTracking(PADAPTER padapter, u8 enable);
extern void GetPowerTracking(PADAPTER padapter, u8 *enable);
extern u32 mp_query_psd(PADAPTER pAdapter, u8 *data);
extern void Hal_SetAntenna(PADAPTER pAdapter);
extern void Hal_SetBandwidth(PADAPTER pAdapter);
extern void Hal_SetTxPower(PADAPTER pAdapter);
extern void Hal_SetCarrierSuppressionTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_SetSingleToneTx ( PADAPTER pAdapter , u8 bStart );
extern void Hal_SetSingleCarrierTx (PADAPTER pAdapter, u8 bStart);
extern void Hal_SetContinuousTx (PADAPTER pAdapter, u8 bStart);
extern void Hal_SetBandwidth(PADAPTER pAdapter);
extern void Hal_SetDataRate(PADAPTER pAdapter);
extern void Hal_SetChannel(PADAPTER pAdapter);
extern void Hal_SetAntennaPathPower(PADAPTER pAdapter);
extern s32 Hal_SetThermalMeter(PADAPTER pAdapter, u8 target_ther);
extern s32 Hal_SetPowerTracking(PADAPTER padapter, u8 enable);
extern void Hal_GetPowerTracking(PADAPTER padapter, u8 * enable);
extern void Hal_GetThermalMeter(PADAPTER pAdapter, u8 *value);
extern void Hal_mpt_SwitchRfSetting(PADAPTER pAdapter);
extern void Hal_MPT_CCKTxPowerAdjust(PADAPTER Adapter, bool bInCH14);
extern void Hal_MPT_CCKTxPowerAdjustbyIndex(PADAPTER pAdapter, bool beven);
extern void Hal_SetCCKTxPower(PADAPTER pAdapter, u8 * TxPower);
extern void Hal_SetOFDMTxPower(PADAPTER pAdapter, u8 * TxPower);
extern void Hal_TriggerRFThermalMeter(PADAPTER pAdapter);
extern u8 Hal_ReadRFThermalMeter(PADAPTER pAdapter);
extern void Hal_SetCCKContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_SetOFDMContinuousTx(PADAPTER pAdapter, u8 bStart);
extern void Hal_ProSetCrystalCap (PADAPTER pAdapter , u32 CrystalCapVal);
extern void _rtw_mp_xmit_priv(struct xmit_priv *pxmitpriv);
extern void MP_PHY_SetRFPathSwitch(PADAPTER pAdapter ,bool bMain);
#endif //_RTW_MP_H_
Reference in a new issue View git blame Copy permalink